In this study, two things were analyzed for Korean Standards certification factory review evaluation items. First, it was examined whether there is a difference between the Practice of factory review evaluation items and Post-Management according to the change in perception of the factory review evaluation items of Korean Standards certification personnel. Second, the moderating effect of the Korean Standards certification personnel's perception of the effect of the Practice of the factory review evaluation items of Korean Standards certification personnel on Post-Management was verified. Although there is a statistically significant difference between Practice and Post-Management according to changes in perception of Korean Standards personnel, there is no statistically significant difference in the impact (slope) of Practice on Post-Management according to changes in perception of Korean Standards certification personnel. As the perception of factory review evaluation items increases, the Practice and Post-Management of factory review evaluation items are increasing, but the impact of the Practice of factory review evaluation items on Post-Management does not affect it. In order to further advance Korean Standards certification, which plays an important role in maintaining the quality level of products produced by companies, efforts to raise the level of perception of Korean Standards certification personnel are considered necessary.

우리나라 식물방역법은 검역병해충으로부터 국내 농업 및 자연환경을 보호하고자 규제병해충(검역병해충, 잠정규제병해충, 규제비검역병해충) 관련 위험평가, 식물검역기술개발계획, 식물검역 절차 및 방법, 검역결과 에 따른 처분, 규제병해충 예찰 및 방제 등에 관한 다양한 법적 절차 등을 규정하고 있다. 하지만, 식물검역병해충 을 어떻게 취급하여야 할 지에 관한 내용은 없다. 따라서 식물방역법이 추구하는 목적을 달성하기 위하여서는 ① 검역병해충을 어떻게 취급하여야 할 지를 규정하여야 하며, ② 검역병해충을 취급하는 시설(검사, 연구, 운송, 보관 등) 기준을 설정하고, ③ 검역병해충 취급 시설을 인증하고, 주기적인 재인증 기준을 설정하여야 한다. 이를 위하여 먼저 식물방역법에 검역병해충 취급시설 등에 관한 규정을 신설하고, 시행령, 시행규칙에 반영한 후에 ① 검역병해충 취급요령 ② 검역병해충 취급시설 기준 ③ 검역병해충 취급시설 인증기준 등의 고시를 제정하여 야 한다. 이를 위하여 식물병해충 관련 학계의 의견 반영이 가장 중요하다.

Crane is an important equipment for the transport of heavy goods in industrial sites, but it is also known as one of the most fatal machines. In order to reduce crane accidents, it is necessary to minimize human errors during crane operations. To achieve this, ergonomic design principles are recommended to be reflected from the crane design stage. The study analyzed the safety certification standards for crane that should be fulfilled at the crane design and manufacturing stage. This study selected five representative ergonomic design principles (feedback, compatibility, consistency, full-proof, and fail-safe) by surveying heuristic evaluation principles that are widely used for usability evaluation in early design stage. Next, the principles were applied to the safety certification standards to identify insufficient clauses. This study identified 12 insufficient clauses out of 119 in the current safety certification standards for crane and discussed their improvement directions to comply the ergonomic principles. The analysis results of this study can help of improving the safety certification standards and the method used in this study can also be applied to identify insufficient clauses in the safety certification standards for other industrial machines such as press machine and lift.

건설현장에서 주로 사용하는 주요 가설기자재 규격에 대한 표준을 정하고 성능에 대한 신뢰를 확보하기 위하여 1992년 처음 도입된 가설기자재 성능검정제도는 2009년 안전인증제도로 변경되어 산업안전보건법 제34조(안전인증) 및 제35조(자율안전확인의 신고)에 근거하여 가설기자재 제조업체의 기술능력과 생산체계, 제품의 성능을 종합적으로 심사하고 안전인증기준에 적합 여부를 검증하여 안전인증표시(마크)를 사용할 수 있도록 하는 제도이다. 성능검정제도는 가설기자재 30종에 대해 제품의 성능만을 시험하여 합격증을 교부하였으나 2009년 1월 1일부터 의무안전인증 가설기자재 12종 33품목과 자율안전확인 신고 가설기자재 8종에 대해서 기술능력 및 생산체계와 제품의 성능을 심사하여 인증서를 교부하는 것으로 변경되었다. 가설기자재의 안전성 및 제품의 신뢰도 향상으로 건설공사 품질 및 안전이 확보됨에도 불구하고 일시적이며 부수적으로 사용되는 자재인 것으로 여겨져 가설기자재의 안전성 확보를 위한 관심과 노력은 매우 미흡하였다. 가설기자재에 대한 관심이 소홀한 가운데 안전성 여부를 확인하기 어려운 재사용가설재가 폭 넓게 사용되고 가설기자재의 가격경쟁이 심화됨에 따라 저가의 재료를 사용한 불법 가설기자재를 생산․유통하는 등 가설기자재 제도 전반에 불법적인 행위가 빈번히 이루어지고 있어 가설기자재 관련 제도와 제품에 대한 안전성과 신뢰의 문제가 다시 제기되고, 향후 가설기자재의 신소재(강화플라스틱 등) 및 신제품(접이식 틀비계 등) 등이 도입될 경우 현행 기준으로는 안전인증 또는 자율안전 확인을 받기 어려우므로 빠르게 진행되는 건설환경 변화에 적절하게 대응하지 못한다는 문제점 또한 제기되고 있다. 가설기자재 관련 문제점들과 제반 현황이 가설기자재를 제조하고 유통하고 사용하는 이해당사자간 신뢰를 잃고 있어 이해당사자간에도 제도 개선을 통한 가설기자재 시장의 정화와 개선이 필요하다는 공감대가 형성되고 있다. 따라서 정부는 가설기자재 관련 문제점을 종합적으로 검토하고 개선하기 위하여 다양한 방향으로 제도개선을 추진하고 있으며, 이와 같은 추진 대책의 일환으로 가설기자재 인증표시 기준에 관한 개선방안 마련을 위하여 가설기자재 생산․유통 및 사용 실태를 파악하고 가설기자재 관련 이해당사자 및 전문가의 의견 수렴 등을 통하여 가설기자재 인증표시 기준을 합리적으로 개선하고 효율적으로 관리하기 위한 연구가 필요하게 되었다. 본 연구를 통해 국내 건설산업에서 중요한 역할을 분담하고 있는 가설기자재의 안전성 향상과 신뢰성 회복을 위한 합리적인 개선방안을 도출하여 산업안전보건법령의 제‧개정에 반영할 필요가 있다.

With the increasing awareness of health and environmental preservation, consumers turn their attention to organic and eco-friendly products. The increased service industry incurred partly by sophistication of industrial structure has resulted in having the service industry subject to environmental certification in a bid to promote sustainable production and consumption, which has contributed to reducing environment loads and energy costs as well as the amount of wastes. The gradually increasing maternity care centers have elevated environment loads and caused a variety of diseases due to a lack of health control and improper treatment of chemical substances. Against this backdrop, this study aims to develop evaluation criteria for an official certification of organic maternity care centers and to present the basic operational proposals through a comparative analysis of organic and eco-friendly industrial certification programs. Due to the absence of studies on certification programs for organic maternity care centers, this study has conducted a comparative analysis of overseas certifications, including Organic SPA, GRA, and Nordic Swan, and domestic eco-friendly hotel service certification standards. The evaluation areas have been classified into 19 or less categories, including 19 items for Organic SPA, 8 items for GRA, 7 items for Nordic Swan and 7 items for eco-friendly hotel service certification, and common evaluation areas have been grouped into categories and health control and education management that are considered important in maternity care centers have been incorporated into evaluation areas, which has eventually produced six different categories. When it comes to selecting evaluation indicators for different categories, what are neither used in nor applicable to maternity care centers have been excluded and similar items have been combined and eventually 41 preliminary evaluation indicators have been selected following in-depth interviews with relevant professionals. Further researches into developing the evaluation system to properly evaluate and certify organic maternity care centers through in-depth interviews and surveys among operators of maternity care centers and relevant professionals will be appreciated.

In relation to a certification system recently, it is coming out complains about make a rule of thumb certification, problems of after-service and duplication with government certifications. Also there is confusion in operating certification system to lac

This study was carried out to design New Certification of Floral Arrangement based on the National Competency Standards to Using Competency Map. Currently the industrial base certification systems, not academic base, are emphasized. Because the industrial base certification system were derived by job analysis of industrial sites. The data were gathered by direct survey on industrial fields and internet homepages of HRD Korea and Q-net etc. and verified by brainstorming on the expert FGI and interview on the flower design industries. Certification events were 2 items such as ‘Unit Floral Arrangement L2’ and ‘Unit Floral Arrangement L4’, and critical duties and optional duties, and levels and required study time were derived. And Competency Map and lifecycle certification development paths were conducted, and the objectives and subjects, required time of education and training for expert and qualification of technical certification. In this study result, the certifications upto level 5 were suggested, if social and legal system would be served the certification level 8 or below could be developed and suggested. Finally news jobs, such as spatial floral arrangement and eco-friendly floral arrangement, are needed to be suggested and competency maps inked into unit flower design and certification events were developed.

Purpose – This paper aims to analyze and investigate to find out the appropriate ways to make an easy TBT of smart city. It is an important issue between Korea and China because TBT of smart city has lots of advantages in IT, S/W, IOT, and Home network. Research design, data and methodology – First, the paper made use of reviewing2nd data analysis and focused on group interview, and then compared with analysis on the international rule and system such as smart city system, technical regulation, and standard through test certification procedure and inspection. Second, this paper reviewed electric/electronic test, certification, and calibration. Third, through analyzing MRA between Korea and china, the paper focused on SDoC, Mutual Acceptance of International certification, and IECCB scheme. Results – Through the comparison and analysis, this paper found that it is important to promote multi-track agreements with the countries that need short-term promotion. Moreover, it is necessary to conclude an agreement with the leading countries in Middle East and Central America. Conclusions – Through the above the reviews and analysis, we can see the importance of promotion in FTA and MRA with the efforts to remove the obstacles and promote to make an easy TBT by MRA between Korea and China.