In the present work, we address the new route for the green synthesis of manganese dioxide (MnO2) by an innovative method named the solution plasma process (SPP). The reaction mechanism of both colloidal and nanostructured MnO2 was investigated. Firstly, colloidal MnO2 was synthesized by plasma discharging in KMnO4 aqueous solution without any additives such as reducing agents, acids, or base chemicals. As a function of the discharge time, the purple color solution of MnO4 - (oxidation state +7) was changed to the brown color of MnO2 (oxidation state +4) and then light yellow of Mn2+ (oxidation state +2). Based on the UV-vis analysis we found the optimal discharging time for the synthesis of stable colloidal MnO2 and also reaction mechanism was verified by optical emission spectroscopy (OES) analysis. Secondly, MnO2 nanoparticles were synthesized by SPP with a small amount of reducing sugar. The precipitation of brown color was observed after 8 min of plasma discharge and then completely separated into colorless solution and precipitation. It was confirmed layered type of nanoporous birnessite- MnO2 by X-ray powder diffraction (XRD), fourier-transform infrared spectroscopy (FT-IR), and electron microscopes. The most important merits of this approach are environmentally friendly process within a short time compared to the conventional method. Moreover, the morphology and the microstructure could be controllable by discharge conditions for the appropriate potential applications, such as secondary batteries, supercapacitors, adsorbents, and catalysts.

Medicinal plant-derived carbon dots are eco-friendly and possess therapeutic properties. Among the medicinal plants studied throughout the world, Centella asiatica (L.) Urb. is known for its medicinal values, especially its neuroceutical and cogniceutical properties. This work discusses the green synthesis of carbon dots (CDs) using C. asiatica leaves as the carbon source via fast and cost-effective microwave-assisted method, and its physico-chemical characterization via UV–visible, fluorescence and FTIR spectrometry, XRD, SEM, AFM, TEM, SAED, EDX and zeta potential analyses. The study revealed quasi-spherical CDs having size ~ 3–6 nm, polycrystalline nature, and presence of various functional groups like –COOH, –H, =CH2 and C–O–C with UV absorption peaks at 213 and 322 nm. Interestingly, the C. asiatica-derived CDs exhibited blue fluorescence under UV with maximum emission wavelength of 460 nm when excited at 400 nm. Further, these CDs were evaluated for their biological applications, which uncovered their potential in therapeutics such as antimicrobial properties against both Gram-positive and Gram-negative bacteria at a dose of 10 μg, strong antioxidant activity with IC50 values of 165.28 and 128.48 μg mL− 1 in DPPH and H2O2 assays, respectively, and profound anti-inflammatory activity with IC50 value of 106.20 μg mL− 1 in protein denaturation assay. The CDs were also assessed for cytotoxicity using whole blood cells and were found to be safe for in vitro administration. Thus, the C. asiatica-derived CDs can be exploited for their potent biomedicinal properties. Fluorescent carbon dots (CDs) were prepared by microwave-assisted pyrolysis of Centella asiatica leaf extract and purification. The as synthesized CDs were subjected to various physico-chemical characterization and biomedical assays to understand its properties.

The presence of dyes in water is the most popular problem recently, so the current study was directed towards the synthesis of an effective material consisting of NiO and MWCNTs. The NiO/F-MWCNTs nanocomposite was synthesized using a simple hydrothermal method after functionalization of MWCNTs using sulfuric acid and nitric acid and utilized as an efficient surface to adsorption of malachite green dye from polluted water. The nanocomposite sample was characterized using several techniques are X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FESEM), High- resolution transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller (BET) surface area analysis, Barrett-Joyner-Halenda (BJH) analysis and Energy dispersive X-ray (EDX). The analytical results showed that the prepared nanocomposite is of good crystalline nature with a particle size of 25.43 nm. A significant specific surface area was 412.08 m2/ g which indicates the effective impact of the nanocomposite in the adsorption of malachite green (MG) dye. On the other hand, the effect of adsorbent dose, temperature, acidic function and contact time on the adsorption efficiency of dye was studied. The kinetics of dye adsorption were also investigated employing two kinetic models, pseudo-first-order model and pseudo-second-order model. Finally, the thermodynamic functions were determined to identify the type of the reaction and the spontaneity of the process.

Silver/graphene core/shell nanocomposites were synthesized through a one-step electric explosion of wire method using only silver wires and ethanol. The morphology of the graphene shell structures can be easily formed by alternating the solvent from deionized water to ethanol. Transmission electron microscopy revealed that the size of the prepared silver/graphene core/ shell nanocomposites was in the 10–110 nm range. The Raman spectra showed the formation of graphene shells on silver. A possible formation mechanism of the silver/graphene core/shell nanocomposites is proposed in this study. The crystallinity of the nanoparticles was investigated via X-ray diffraction. The graphene on the surfaces of the nanocomposites containing functional groups was analyzed through Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses. Zeta potential and dynamic light scattering analyses were performed to determine the dispersion characteristics of the nanocomposites when redispersed in other solvents.

Nanomaterials (NMs) are gradually becoming pervasive in the modern world, entering every application for improving the quality of life. Multifaceted uses of NMs in curing diseases, biomedical instrumentation, bioimaging, drugs, and gene delivery, display devices, nanosensors, and biomarkers in several fields ranging from agriculture to industries, healthcare, and environment, have been well recognized. Carbon-based nanomaterials (CNMs) constitute a major type of NMs with broad-spectrum applications including their uses in agriculture. These are synthesized in large quantities via synthetic and biological approaches. Biological approaches are gaining appreciation and momentum, owing to the advantages associated with them, major being their environment friendly or ‘Green’ nature. This topical review focuses on the preparation of CNMs using natural resources, i.e., using the Green Nanotechnology. The up-to-date compilation presented here includes most of the popular green technological methods of producing the CNMs and their immediate uses as anticancer agents, in bio-labelling, as biosensors, in bio-remediation, in cell imaging, in fluorescent inks, and fluorescent dyes, as plant growth inducing agents, in nano-probes, in light-emitting devices and other applications. It is intended to update the reader with the state-of-the-art knowledge about the green technological methods for synthesizing CNMs, their uses, current trends, challenges, and future outlook on the topic.

Fluorescent nanostructures based on carbon, or carbon dots, are attracting much attention and interest because of their diverse properties which can be applied in several fields of knowledge, such as optics, biomedicine, environmental research, among others. Such properties are in part, derived from its intrinsic luminescence from tunable functional groups. In this work, we produced carbon nanodots (CND) using agro-industrial residues, such as Lolium perenne and malt bagasse. The methods used were conventional hydrothermal syntheses and microwave-assisted hydrothermal synthesis. To the best of our knowledge, this is the first time that carbon dots synthesized from this ryegrass type are reported. The synthesis methods were one step (no catalyst, base, or acid were added for passivation), and the functional groups responsible for the luminescence and high solubility in water were identified by infrared spectroscopy, being mainly C=O, C–OH, C–N, and N–H. According to our theoretical studies, the C=O group introduced a new energy level for electronic transitions that can affect the emission properties. Fluorescence images of osteoblasts using CNDs were acquired and their chelating property towards Pb2+ and Cr6+ detection was tested.

An extract of fresh guava leaves (Psidium guajava) was used as a green carbon precursor to fabricate blue fluorescent carbon quantum dots (GCQDs) by hydrothermal process. The GCQDs show bright blue fluorescence emission under UV light with an excitation wavelength of 350 nm and emission at 450 nm. The physical structure of GCQDs was characterized by Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), High-resolution transmission electron microscope (HR-TEM) and atomic force microscopy (AFM). GCQDs 80 μg inhibited the growth of waterborne pathogens Escherichia coli and Salmonella typhi. We also investigated the catalytic activity of the GCQDs on the removal of two azo dyes, namely Congo red and bromophenol blue, with and without NaBH4. The GCQDs showed an excellent reduction of color intensity of both dyes without NaBH4 within 30 min of treatment.

The emergence of green methods for the synthesis of graphene-based composites became the gateway for the solution of pollution and economic synthetic methods. Herein, we reported a single step in situ synthesis of reduced graphene oxide sheets decorated with silver nanoparticles (CRG–Ag nanocomposite) using custard apple leaf extract as an effective reducing and stabilizing agent. The ultraviolet–visible, Fourier transform infrared and Raman techniques revealed a primary confirmation about the formation of the said nanocomposite. The X-ray diffraction studies confirmed the face-centred cubic crystal structure of silver nanoparticles (Ag NPs) of 30 nm in size. The high-resolution scanning electron microscope spectra revealed the uniform distribution of Ag NPs on the graphene sheets. This simple, novel and rapid approach enabled a facile production of homogeneously deposited Ag NPs on graphene sheets. Thus synthesized CRG–Ag nanocomposite showed excellent photocatalytic efficiency of 96% in 2 h under sunlight using methylene blue as a model pollutant.

We report the use of carrot, a new and inexpensive biomaterial source, for preparing high quality carbon dots (CDs) instead of semi-conductive quantum dots for bioimaging application. The as-derived CDs possessing down and up-conversion photoluminescence features were obtained from carrot juice by commonly used hydrothermal treatment. The corresponding physiochemical and optical properties were investigated by electron microscopy, fluorescent spectrometry, and other spectroscopic methods. The surfaces of obtained CDs were highly covered with hydroxyl groups and nitrogen groups without further modification. The quantum yield of as-obtained CDs was as high as 5.16%. The cell viability of HaCaT cells against a purified CD aqueous solution was higher than 85% even at higher concentration (700 μg mL−1) after 24 h incubation. Finally, CD cultured cells exhibited distinguished blue, green, and red colors, respectively, during in vitro imaging when excited by three wavelength lasers under a confocal microscope. Offering excellent optical properties, biocompatibility, low cytotoxicity, and good cellular imaging capability, the carrot juice derived CDs are a promising candidate for biomedical applications.

이 연구에서는 계면활성제에 작용기를 첨가하여 유화제 뿐만 아니라 합성에서의 모노머로 작 용할 수 있는 반응성 계면활성제를 합성하였다. 반응성 계면 활성제는 메타아크릴 산, 아크릴산과 비이 온성 계면 활성제인 폴리 옥시 에틸렌 라우릴 에테르 (POE 23)를 사용하여 합성되었으며 벤젠을 용매 로서 사용하였고, P-TsOH를 촉매로서 사용 하였다. 합성된 계면 활성제는 FT-IR, 1H-NMR 스펙트 럼, 원소 분석을 하였다. 물성 평가는 HLB, Cloud point, 표면 장력, 임계 미셀 농도를 측정 하였다. HLB 값은 11.62∼12.09 범위로 평가 하였다. cmc 값은 표면 장력 법으로 측정하였을 때 1×10-4~5×10-4 의 값을 가졌다. 실험을 통해 측정된 Cloud point은 35, 39℃ 이었다. 합성 계면 활성 제의 유화 특성은 polyoxyethylene lauryl ether보다 낮았다. 또한, 유화력은 벤젠에서 보다 대두유에서 더 좋았다. 실험결과 합성 수율은 93.27 ∼ 94.49%로 확인되었다.

본 연구에서는 CCl4 존재하에서 Cl2(g) and ultra violet(200~300nm) 파장으로 maleic anhydride 와 Cl2(g)을 반응시켜 α,β-dichlorosuccinic acid 를 합성하였다. 그리고 두 번째 반응은 N-(α,β-dichloro)succinic acid 함유 glucosamine 유도체(I)를 합성하는 것으로 methanol 함유 2% acetic acid 용매 하에서 glucosamine과 과량의 α,β-dichlorosuccinic anhydride을 넣은 후 온도를 70℃로 올리면서 반응시켰다. 우리는 합성한 유기산 유도체들이 해태 김 재배와 피부미용에 주로 유용하게 활용할 것으로 본다.

We have synthesized bluish-green, highly-efficient BaSi2O2N2:Eu2+ and (Ba,Sr)Si2O2N2:Eu2+ phosphors through aconventional solid state reaction method using metal carbonate, Si3N4, and Eu2O3 as raw materials. The X-ray diffraction (XRD)pattern of these phosphors revealed that a BaSi2O2N2 single phase was obtained. The excitation and emission spectra showedtypical broadband excitation and emission resulting from the 5d to 4f transition of Eu2+. These phosphors absorb blue light ataround 450nm and emit bluish-green luminescence, with a peak wavelength at around 495 nm. From the results of anexperiment involving Eu concentration quenching, the relative PL intensity was reduced dramatically for Eu=0.033. A smallsubstitution of Sr in place of Ba increased the relative emission intensity of the phosphor. We prepared several white LEDsthrough a combination of BaSi2O2N2:Eu2+, YAG:Ce3+, and silicone resin with a blue InGaN-based LED. In the case of onlythe YAG:Ce3+-converted LED, the color rendering index was 73.4 and the efficiency was 127lm/W. In contrast, in theYAG:Ce3+ and BaSi2O2N2:Eu2+-converted LED, two distinct emission bands from InGaN (450nm) and the two phosphors (475-750nm) are observed, and combine to give a spectrum that appears white to the naked eye. The range of the color renderingindex and the efficiency were 79.7-81.2 and 117-128 lm/W, respectively. The increased values of the color rendering indexindicate that the two phosphor-converted LEDs have improved bluish-green emission compared to the YAG:Ce-converted LED.As such, the BaSi2O2N2:Eu2+ phosphor is applicable to white high-rendered LEDs for solid state lighting.

지진공학 분야에서는 내진설계를 위한 필요성으로 인해 근역의 강지진동이 관심의 대상이 되어왔으며, 최근 우리나라의 모든 구조물에 내진설계가 의무화되면서 그 필요성은 더욱 부각되고 있는 상황이다. 본 연구에서는 특정부지에서의 강지진동 합성을 위하여 경험적 그린함수 방법을 이용한 합성방법을 적용하였다. 이 합성방법은 Haskell 타입의 운동학적 지진원 모델과 동일한 지역에서 발생한 지진의 유사성 이론을 기본으로 하고 있다. 합성에 이용되는 변수들은 단층길이, 폭 및 변위지속 시간과 같은 단층변수와 모멘트간의 일관된 관계로부터 결정된다. 본 연구에서 적용된 합성방법을 1997년 3월27일 일본의 동일지역에서 차례로 발생한 2개의 중규모(ML 4.7) 및 대규모 지진(ML 6.5)에 대하여 적용하여 강지진동을 합성하고 결과를 분석하였다. 본 연구방법을 적용한 결과 중규모(ML 4.7) 오부터 관측된 강지진동을 이용하여 가속도, 속도 및 변위 성분에서 합성된 강지진동은 파형뿐만 아니라 전체 진동수 대역에서 대체적으로 실제 강지진동을 양호하게 예측하는 경향을 보였다. 또한, 전체적으로 합성운동의 첨두값 역시 실제 계측된 첨두값과 비교할 때 만족스러운 정도로 일치하는 결과를 보여주었다. 특히 가속도이력의 첨두값은 단지 약 8.8%만의 차이를 보여주었다.

The symmetric naphthothiazolo carbocyanine is of industrial importance as green-sensitizing dye in the spectral sensitization of emulsion microcrystals in negative film-making. In this study, green-sensitizing dye was prepared by the reaction of 2-methyl-3-sulfopropyl-5-phenyl-benzoxazolium(inner salt) with triethyl orthoacetate in the presence of triethylamine. The product was identified by using various analytical tools such as Elemental analyzer, IR spectrophotometer, UV-Vis spectrophotometer, 1H-NMR spectrometer, TGA and DSC. The maximum absorption peak in methanol solvent was 502nm. Therefore, it was concluded that benzoxazolo carbocyanine dye can be used as green-sensitizing dye for the spectral sensitization of photographic emulsion.

The green synthesis of inorganic nanoparticles (NPs) using biomaterials has garnered considerable attention in recent years because of its eco-friendly, non-toxic, simple, and low-cost nature. In this study, we synthesized NPs of noble metals, such as Ag and Au using an aqueous extract of a marine seaweed, Ecklonia cava. The formation of AgNPs and AuNPs was confirmed by the presence of surface plasmon resonance peaks in UV-Vis absorption spectra at approximately 430 and 530 nm, respectively. Various properties of the NPs were evaluated using characterization techniques, such as dynamic light scattering, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. Phytochemicals in the seaweed extract, such as phlorotannins, acted as both reducing and stabilizing agents for the growth of the NPs. The green-synthesized AgNPs and AuNPs were found to exhibit high catalytic activity for the decomposition of organic dyes, including azo dyes, methylene blue, rhodamine B, and methyl orange.