최근 관광, 레저 수요의 증대로 해안 시설물(방파제)에서 낚시를 통해 여가를 즐기는 낚시객의 증대와 아울러 매년 해안 시설물인 소파블록(Tetrapod, TTP)에서의 낙상사고가 사회적 문제가 되고 있다. 본 연구에서는 낙상사고가 주로 발생하는 소파블록을 안전망으로 덮어 낚시객의 낙상을 저감하는 안전사고 방지 시설물 개발의 기초 연구로서 적절한 그물코 크기를 제시하고자 한다. 이는 안전망 시설물의 규모 및 경제성을 고려할 때 반드시 선행되어야 할 부분이다. 본 연구에서 적용한 안전망의 그물코 크기 결정 방법은 낚시객들의 성별, 연령별 현황과 한국인의 인체치수조사 결과를 바탕으로 최적의 그물코 크기를 산정하고자 하였다. 그 최종 결과로서 안전망의 그물 코 크기는 최소 낚시객의 넙다리 둘레에서부터 최대 가슴둘레까지를 고려하여 18.6~27.0 cm의 범위로 산정되었다.

The mesh selectivity of hairtail (Trichiurus lepturus) caught by coastal drift gill net was examined in field experiments with three different mesh sizes (45, 50 and 55 mm) from October to November, 2013 in the coastal areas of south-west of Jeju province. The mesh selectivity tests were conducted with the experimental net to be set middle part of conventional driftnets. The mesh selectivity tests were carried out the total of four times. The selectivity curve was estimated by the Kitahara’s and Fujimori’s method. In the results, the catch number of hairtail was 653 (125.8 kg) and occupied 34.8% in total catches weight. The optimal mesh size for 50% selection on the minimum landing size (180 mm, AL) and the first maturity size (260 mm, AL) of hairtail were estimated as 47.2 mm and 64.5 mm by master selectivity curves, respectively.

The development of this technology produced the design of welding mesh automation system and obtained the following results. 1. The performance criteria of this research and development were higher than this, resulting in more than 300 N/㎟ of disconnection and more than 250N/㎟ of double wire. Double wire also obtained values of as low as 521 N/㎟ and as high as 623 N/㎟ 2. We compared the bending strength of the single mesh and the dual mesh by the bending test, and the result is 1692N of the average of single-mesh and 487N of double wire welded mesh. 3. As a result of the test, 64 minutes of abs of 5mm wire were 112 minutes of each. The welding speed was constant and stable.

Structural analysis remains as an essential part of any integrated civil engineering system in today’s rapidly changing computing environment. Even with enormous advancements in capabilities of computers and mobile tools, enhancing computational efficiency of algorithms is necessary to meet the changing demands for quick real time response systems. The finite element method is still the most widely used method of computational structural analysis; a robust, reliable and automated finite element structural analysis module is essential in a modern integrated structural engineering system. To be a part of an automated finite element structural analysis, an efficient adaptive mesh generation scheme based on R-H refinement for the mesh and error estimates from representative strain values at Gauss points is described. A coefficient that depends on the shape of element is used to correct overly distorted elements. Two simple case studies show the validity and computational efficiency. The scheme is appropriate for nonlinear and dynamic problems in earthquake engineering which generally require a huge number of iterative computations.

21세기밀레니엄 식품으로 미국 FDA는 하루 콩 단백질 25g을 섭취하면 관상동맥질환이 예방될 만큼 기능성이 우수하다고 평가되고 있으며, 콩은 세계적인 식품으로 1,000여 가지의 용도로 이용되고 있다. 콩을 가공하여 만들어지는 두부는 콩 분말, 즉 Mesh 형태에 따라 두부의 종류가 분류되며, Nano기술을 도입하여 국산기계를 제작한 생산시스템으로 국산 콩 300 Mesh분말에 비소를 제거한 심층 해양수를 이용하여 단백질이 응고되는 원리와 침지과정이 생략되고 수용성 단백질과 불용성 단백질과 섬유소 기타 영양성분을 손실 없이 제품화 할 수 있는 전두부 제조 및 생산과정과 콩 분쇄기는 유분이 많은 국산 콩 뿐만 아니라 수입 콩 일반적인 농산물의 분쇄가 가능하여 두부식품발달에 미치는 영향을 연구하였다

The objective of this study was to investigate the suitable method for rapid establishment of grassland according to forage species, mixed pastures and installation of mesh at 35 degree angle of cutting area in the middle region of Korea. In agronomic characteristics after wintering, vegetation coverage of Tall fescue(TF) was 74% in monoculture, which was the highest among 3 forage crops. Meanwhile average vegetation coverages of monoculture and mixed pasture were 67 and 92% in treated of mesh, which were 4 and 18% higher than untreated of mesh, respectively. In botanical composition, TF of monoculture and Orchardgrass(OG) and TF oriented mixed were indicated over 94% forage coverage. Meanwhile forage coverages Kentucky bluegrass(KBG) and Red top(RT) of monoculture and Perennial ryegrass(PRG) oriented mixture were 89, 81 and 92% in treated of mesh, which were 7, 6 and 5% higher than untreated of mesh, respectively. In forage productivity, dry matter yield(DMY) of TF(12,537kg/ha) and KBG(11,897kg/ha) of monoculture were significant(p<0.05) higher than RT(9,604kg/ha). Meanwhile DMY of OG(12,227kg/ha), TF(12,823kg/ha) and PRG(11,871kg/ha) oriented mixed were not significant difference(p>0.05). In forage quality of monoculture, in the first year, crude protein of KBG was 13.6%, which was the highest among 3 forage species. Also neutral detergent fiber(NDF) of TF was 56.5%, which was the lowest among 3 forage species. In mixed pasture, in the second year, NDF and acid detergent fiber of PRG oriented mixed were 56.5 and 34.3%, respectively, which was the lowest among 3 mixed pasture. In conclusion, forage species TF was more suitable on initial rootage and continuous forage coverage, OG and TF oriented mixed were more suitable on continuous forage coverage. Also the installation of mesh showed positive effects on initial rootage and maintain forage ratio.

A metal mesh TCE film is fabricated using a series of processes such as UV imprinting of a transparent trench pattern (with a width of 2-5 μm) onto a PET film, filling it with silver paste, wiping of the surface, and heatcuring the silver paste. In this work nanosized (40-50 nm) silver particles are synthesized and mixed with submicron (250-300 nm)-sized silver particles to prepare silver paste for the fabrication of metal mesh-type TCE films. The filling of these silver pastes into the patterned trench layer is examined using a specially designed filling machine and the rheological testing of the silver pastes. The wiping of the trench layer surface to remove any residual silver paste or particles is tested with various mixture solvents, and ethyl cellosolve acetate (ECA):DI water = 90:10 wt% is found to give the best result. The silver paste with 40-50 nm Ag:250-300 nm Ag in a 10:90 wt% mixture gives the highest electrical conductance. The metal mesh TCE film obtained with this silver paste in an optimized process exhibits a light transmittance of 90.4% and haze at 1.2%, which is suitable for TSP application.

Comparative fishing experiments were conducted in the eastern coastal waters near Uljin, Korea from 2002 to 2004, using the experimental trammel nets to estimate the selectivity for spinyhead sculpin Dasycottus setiger. The inner panels of the nets were made of nylon monofilament with four mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) while its two outer panels were made of twisted nylon multifilament with a mesh size of 510 mm. The SELECT (Share Each Length’s Catch Total) procedure with maximum likelihood method was applied to obtain a master selection curve. The different functional models (normal, lognormal, bi-normal, and logistic model) were fitted to the catch data. The lognormal model with the fixed relative fishing intensity was chosen as the best-fitted selection curve through comparison of model deviance and AIC (Akaike’s Information Criterion). The optimum relative length (the ratio of fish total length to mesh size) with the maximum relative efficiency was obtained as 2.492.

차량-궤도 구조물 동적 상호작용해석은 차량의 접촉점이 보요소로 모형화된 레일 위를 일정한 속도로 주행하는 미끄러지 는 접촉문제로 취급하였다. 하지만 Euler 보와 같은 고차 다항식의 형상함수가 적용된 유한요소를 사용할 경우 미끄러지는 접촉문제에서 적합조건을 만족하지 못한다. 이 연구에서는 유한요소해석프로그램이 미끄러지는 접촉문제에서의 적합조건을 만족시키지 못하는 것에 대한 해결법으로 주행로를 이루는 보요소를 보다 세분화하여 동적상호작용해석에서의 정확성을 확 보하고자 하였다. 이를 위해 간단한 예제들을 통해 주행로를 이루는 보요소의 세분화 정도에 따른 동적상호작용해석의 거동 을 분석하였으며, 해석 프로그램의 동적상호작용해석에의 적용성을 평가하였다. 마지막으로 사각을 갖는 철도 암거 접속부 의 뒷채움재 설치 형식에 따른 차량주행시의 거동을 평가하기 위하여 동적상호작용해석을 수행하고, 접속부 뒷채움재 형식 의 변경에 따른 지지강성의 변화에 의한 영향과 노반침하에 따른 궤도틀림의 영향을 비교분석하였다.

스폿 용접 접합의 삼차원 모델링을 위하여 강한 불연속이 내장된 유한요소를 사용하였다. 스폿 용접의 기하학적 형상을 유한요소망 대신 요소에 내장된 불연속 면에서의 특수한 응집 법칙을 이용하여 표현하였다. 이를 통하여 기존의 적응적 유 한요소망을 이용하는 접근법과 달리 스폿 용접의 국부적인 형상에 독립적인 유한요소망을 구성할 수 있다. 또한, 스폿 용접 의 형상을 명시적으로 고려하여 모델링함으로써 기존의 점 구속조건을 이용하는 접근법과 달리 망 독립적인 해를 얻을 수 있다.

This study synthesized pure anatase carbon doped TiO2 photocatalysts supported on a stainless steel mesh using a sol-gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide (DMF)/TiCl4. The influence of the pyrolysis temperature and holding time on the morphological characteristics, particle sizes and surface area of the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The XRD patterns showed that the supported TiO2 nanocrystals are typically anatase, polycrystalline and body-centered tetragonal in structure. The EDS and XPS results complemented one another and confirmed the presence of carbon species in or on the TiO2 layer, and the XPS data suggested the substitution of titanium in TiO2 by carbon. Instead of using calcination, PAN pyrolysis was used to control the carbon content, and the mesoporosity was tailored by the applied temperature. The supported TiO2 nanocrystals prepared by pyrolysis at 300, 350, and 400ºC for 3 h on a stainless steel mesh were actual supported carbon doped TiO2 nanocrystals. Thus, PAN/DMF/TiCl4 offers a facile, robust sol-gel related route for preparing supported carbon doped TiO2 nanocomposites.

A tensile failure criterion that can minimize the mesh-dependency of simulation results on the basis of the fracture energy concept is introduced, and conventional plasticity based damage models for concrete such as CSC model and HJC model, which are generally used for the blast analyses of concrete structures, are compared with orthotropic model in blast test to verify the proposed criterion. The numerical prediction of the time-displacement relations in mid span of the beam during blast loading are compared with experimental results. Analytical results show that the numerical error is substantially reduced and the accuracy of numerical results is improved by applying a unique failure strain value determined according to the proposed criterion.

FEM 수치해석을 위한 사면체격자 생성을 위해서는 물체의 볼륨정보를 표현할 수 있는 Boundary Representation (B-Rep) 모델이 필요하다. 공학분야에서는 파라메트릭 솔리드 모델링(Parametric Solid Modeling) 방법을 사용하여 BRep 모델을 정의한다. 반면 지질모델링은 메쉬 기반의 불연속(discrete) 모델링 방법을 사용하는데 이를 지질솔리드모델 (Sealed Geological Model)이라 부르며 지층, 단층, 관입암, 모델 경계면과 같은 지질학적 인터페이스들을 이용해 지질 도메인을 정의한다. 공학분야의 파라메트릭 모델링과 불연속 모델링 방식의 자료구조의 차이로 인해 불연속 B-Rep 모 델은 공학분야에서 사용하는 다양한 오픈소스, 상용 메쉬제작 소프트웨어와 쉽게 호환되지 않는다. 이 논문에서는 공학 용 메쉬 제작 소프트웨어와의 호환성을 가지도록 지질솔리드모델을 대표적인 오픈소스인 Gmsh와 상용 FEM 해석 소 프트웨어인 COMSOL로 변환하는 프로그램을 제작하였다. 지질모델링 소프트웨어를 통해 제작한 복잡한 지질구조모델 을 사용자 편의성을 갖춘 다수의 상용 소프트웨어서 쉽게 활용할 수 있어 지열, 암석역학 등 다양한 지구과학 시뮬레 이션 연구에 도움이 될 것으로 생각된다.

The tail flip of the decapod shrimp is a main feature in escaping behavior from the mesh of the codend in the trawl. The characteristics of tail flip in target prawn was observed and analyzed in a water tunnel in respect of flow condition and mesh penetration by a high speed video camera (500 fps). The tail bending angle or bending time in static water was significantly different than in flow water (0.7 m/s) and resultantly the angular velocity in static water was significantly higher than in flow water when carapace was fixed condition. When escaping through vertical traverse net panel in water flow the relative moving angle and relative passing angle to flow direction during tail flip, it significantly decreases the number of shrimps escaping than the case of blocking shrimp. The bending angles of tail flip between net blocking and passing through mesh were not significantly different while the bending time of shrimp passing through mesh was significantly longer than when shrimp blocking on the net. Accordingly the angular velocity of passing through mesh was significantly slower than blocking on the net although the angular velocity of the tail flip was not significantly related with carapace length. The main feature of tail flip for mesh penetration was considered as smaller diagonal direction as moving and passing angle in relation to net panel as right angle to flow direction rather than the angular velocity of tail flip.

The electric flexible videoscope was developed. The developed components of the videoscope are insertion tube, 360 degrees full articulation tip with joystick control, detachable probe part, camera module equipped with CMOS sensor and adjustable high-intensity white LED light sources. The insertion tube can have strong torsional rigidity from the components of spiral spring and tungsten mesh tube. The handset with joystick control makes it possible to manipulate the videoscope tip articulation in 360 degrees of all directions easily. Over 90 degrees of bending angle measured from the straight camera probe makes it possible to inspect the surface of side wall. The detachable probe model can separate insertion tube with probe. It is useful to select proper length of insertion tube. Several tests were performed to check the development objectives.