The complexation of silicon with carbon materials is considered an effective method for using silicon as an anode material for lithium-ion batteries. In the present study, carbon frameworks with a 3D porous structure were fabricated using metal–organic frameworks (MOFs), which have been drawing significant attention as a promising material in a wide range of applications. Subsequently, the fabricated carbon frameworks were subjected to CVD to obtain silicon-carbon complexes. These siliconcarbon complexes with a 3D porous structure exhibited excellent rate capability because they provided sufficient paths for Li-ion diffusion while facilitating contact with the electrolyte. In addition, unoccupied space within the silicon complex, combined with the stable structure of the carbon framework, allowed the volume expansion of silicon and the resultant stress to be more effectively accommodated, thereby reducing electrode expansion. The major findings of the present study demonstrate the applicability of MOF-based carbon frameworks as a material for silicon complex anodes.

High-intensity focused ultrasonic (HIFU) decontamination technology to decontaminate complex metal radioactive waste was developed and verified. Ultrasonic decontamination technology is a method widely used in this field, but its energy strength is weak, so it cannot be applied to fixed contamination. The HIFU developed in this study can eliminate a wide range of fixed contamination due to the advantage of maintaining a high frequency while having hundreds of times the energy intensity compared to conventional general ultrasonic method. In addition, there is a merit in that there is no work that generates a lot of secondary wastes such as chemical decontamination method or threatens the safety of workers. In particular, high ultrasonic energy is transmitted to curved parts and inside pipes that cannot be decontaminated with blasting method, so various types of metal wastes can be treated with the HIFU method. In this study, the performance of the HIFU was verified for zirconium chips, and the radioactivity after decontamination was reduced to less than MDA in all subjects.

Nanostructured ZnO materials have been studied extensively because of their functional properties. This paper presents a composite material of zinc oxide quantum dots (ZnO QDs) and porous carbon using a one-step carbonization process. The direct carbonization of a metal–organic complex generates mesostructured porous carbon with a homogeneous distribution of ZnO QDs. The structural and morphological properties are investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The resulting ZnO QDs@porous carbon composite delivers a high specific capacity of 990 mAh g−1 at 100 mA g−1, 357 mAh g−1 at 2 A g−1, and high reversibility when evaluated as an anode for lithium ion batteries.

본 연구에서는 특별관리해역인 시화호 유역의 산업단지 하천에 강우 시 비점오염의 형태로 유입되는 중금속의 유출 특성 파악 및 오염원 파악을 하천 토구를 통해 배출되는 강우유출수 내 용존 및 입자성 중금속 (Cr, Co, Ni, Cu, Zn, As, Cd, Pb)을 조사하였다. 용존성 Co와 Ni은 강우 초반에 고농도로 유출된 후 시간에 따라 감소하는 결과를 보였으나, 대부분의 원소는 조사시기별 강우량 및 유량 변화에 따라 각각 다른 특징을 보였다. 입자성 중금속의 경우, 시간에 따른 부유물질의 농도 변화와 유사한 경향을 보였다. 강우유출수 내 존재하는 중금속 중 Co, Ni, Zn는 용존 상태로 유출되는 비율이 높았고, Cr, Cu, Pb은 입자상 유출 비율이 상대적으로 높았다. 입자 상태로 유출되는 중금속의 인위적 오염도를 평가하기 위해 농집지수를 계산한 결과, Cu, Zn, Cd은 very highly polluted에 해당하는 심각한 오염수준으로 나타났다. 연구지역인 3간선수로 유역 인근의 도로먼지 중 125 μm 이하에서의 중금속 농도와 비교한 결과, 강우유출수 내 Cu, Zn, Cd의 중금속이 금속제조관련 시설에서 절삭 혹은 가공 중에 발생하여 산업시설 표면에 축적되어 있는 금속물질이 강우유출수와 함께 수환경으로 유출된 것을 알 수 있었다. 강우유출수 내 총중금속 평균 유출부하량은 1회 강우 시 Cr 128g, Co 12.35 g, Ni 98.5 g, Cu 607.5 g, Zn 8,429.5 g, As 6.95 g, Cd 3.7 g, Pb 251.75 g으로 금속제조와 관련된 산업시설이 주로 존재하는 유역의 특성을 잘 반영한 것으로 판단된다

We have demonstrated the production of thin films containing multilayer graphene-coated copper nanoparticles (MGCNs) by a commercial electrodeposition method. The MGCNs were produced by electrical wire explosion, an easily applied technique for creating hybrid metal nanoparticles. The nanoparticles had average diameters of 10–120 nm and quasi-spherical morphologies. We made a complex-electrodeposited copper thin film (CETF) with a thickness of 4.8 μm by adding 300 ppm MGCNs to the electrolyte solution and performing electrodeposition. We measured the electric properties and performed corrosion testing of the CETF. Raman spectroscopy was used to measure the bonding characteristics and estimate the number of layers in the graphene films. The resistivity of the bare-electrodeposited copper thin film (BETF) was 2.092 × 10–6 Ω·cm, and the resistivity of the CETF after the addition of 300 ppm MGCNs was decreased by 2% to ~2.049 × 10–6 Ω·cm. The corrosion resistance of the BETF was 9.306 Ω, while that of the CETF was increased to 20.04 Ω. Therefore, the CETF with MGCNs can be used in interconnection circuits for printed circuit boards or semiconductor devices on the basis of its low resistivity and high corrosion resistance.

정삼투 분리막 용도에 적합한 폴리아미드 복합막의 제조에 있어 지지층의 극성 및 공극률이 폴리아미드 구조 및 정삼투 분리막 투과 성능에 미치는 영향을 살펴보기 위하여 클레쏘킬레이트 금속착물(0.1-0.5중량%)이 함유된 폴리술폰(18중 량%) 용액을 상전이 공정을 통하여 지지층을 제조하였다. 제조된 지지층 상에 방향족 폴리아미드 활성층을 제막하였다. 다공 성 PSF 지지층 제조를 위하여 상대적으로 낮은 폴리술폰(12중량%) 용액을 이용한 지지층을 폴리에스터 필름상에서 제조한 후 필름을 제거하고 제조된 지지층 상에 방향족 폴리아미드 활성층을 제막하였다. 제막된 시편 중 폴리술폰(18중량%)/금속착 물(0.5중량%)로 만들어진 FO막은 유량 9.99 LMH, reverse salt flux 0.77 GMH로 HTI의 상용막(10.97 LMH, 2.2 GMH)과 비교해도 거의 비슷한 유량값과 향상된 RSF 값을 얻을 수 있었다. 캐스팅 용액의 금속착물의 첨가로 활성층 두께가 줄어들 었으나 제거효율은 향상되는 결과를 얻을 수 있었다.

본 연구는 거대고리 금속 이온 착화합물과 유도체를 이용하여 미세 다공성 구조를 가지는 분리막의 제조에 관한 것이다. 고분자와 금속이온 리간드 착물 시스템을 이용함으로써 기존의 방법들에 비해 상 전이 과정을 보다 정교하게 제어할 수 있었다. 금속염, cyclohexanedione dioxime, hydroxyphenylboronic acid와의 축합 반응을 통하여 금속 clathrochelate 착물을 얻을 수 있었다. PES, PVP, BE와 금속 clathrochelate 착물을 DMF에 녹인 후 비용매 유도 상 전이법을 통하여 유무기 혼성 고분자막을 제조하였다. 제조된 분리막의 구조는 FE-SEM과 microflow permporometer로 조사하였다. p-Hydroxyphenyl group 을 가지는 Fe(II) clathrochelate 착물의 첨가는 분리막의 구조에 있어 기공 크기 분산도를 좁혀주고, 표면의 기공 밀도를 높여 주었으며 최대 기공 크기를 감소시킴을 볼 수 있었다.

본 연구는 도심지역인 서울시청 부근과 공단 지역인 안산 반월 공단지역 내에 서식하는 비둘기를 대상으로 중금속 농도의 차이가 번식 경과에 미치는 영향을 파악 하고자 수행하였다. 조사 결과, 서울지역의 비둘기의 알 내용물 및 성조의 뼈 조직 중 납 농도가 각각 평균 1.64 ug wet g-1, 29.5 ug wet g-1으로 안산 공단지역의 1.13 ug wet g-1, 10.5 ug wet g-1 보다 높게 검출되었고

Tris(8-hydroxyquinoline)-aluminum complex(AlQ3) having greenish luminescent characteristics was synthesized and it was confirmed with UV-Vis absorption spectroscopy, elemental analysis, and FT-IR spectroscopy that AlQ3 was successfully synthesized. Thin films of AlQ3 having multilayer structure were prepared by spin coating method and vacuum evaporation technique. Photopluminescent characteristics of these films were investigated by Luminescence spectroscopy and Current-Voltage(I-V) characteristics of these films were also investigated.

Diazotization of 2-Amino-5-nitrophenol was Synthesized by the direct diazotization method. The diazonium salts are usually stabilized in the from of double salts. The double salts of zinc chloride are the Commonest, and the double salt method is Specially applicable to the yield-up of coupling. The azo dye(2-naphthol-1-(2'-diazo-5'-nitrophenol)) is Converted into a chromium Complex by heating(100℃) with chromic formate, and DMF. The removal of inorganic salts from dyestuffs was performed in DMF solvent. This effect was more pronounced. From these results, It was obtained to liquid dyestuffs of metal complex with High fastness and high adsorption.

In aqueous acid solution [Cr(CN)_6]^3- aquates via a series of stepwise stereospecific reactions to give [Cr(H_2O)_6]^3+ as the final product.Some of the intermediate cyanoaquo complexes in the sequence have been isolated.These complexes aquate by both acid independent and acid denpendent pathways,the latter involving protonation of the cyano ligands followed by aquation of the singly protonated species. The kinetic data for the aquation of [CrCN(H_2O)_5]^2+ are consistent with the transition state structure, [(H_2O)_4Cr(CN)-OH-Cr(H_2O)_5]^3+.Addition of Cr^2+ to solutions of cyanocobalt(III) complexes produces the metastable intermediate[CrNC(H_2O]^2)+.This isomerizes to in a Cr^2+ -catalyzed reaction which occurs by a ligand-bridged electron-change mechnism. From acid catalysis on these aquation reactions, it product HCN. Especially, HSO_3 ions do the role of catalyst in the formation of HCN from CrCN^3+.