검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 42

        1.
        2024.07 KCI 등재 구독 인증기관 무료, 개인회원 유료
        For the OPR1000, a standard power plant in Korea, an analytical model of the containment building considering voids and deterioration was built with multilayer shell elements. Voids were placed in the vulnerable parts of the analysis model, and the deterioration effects of concrete and rebar were reflected in the material model. To check the impact of voids and deterioration on the seismic performance of the containment building, iterative push-over analysis was performed on four cases of the analytical model with and without voids and deterioration. It was found that the effect of voids with a volume ratio of 0.6% on the seismic performance of the containment building was insignificant. The effect of strength reduction and cross-sectional area loss of reinforcement due to deterioration and the impact of strength increase of concrete due to long-term hardening offset each other, resulting in a slight increase in the lateral resistance of the containment building. To determine the limit state that adequately represents the seismic performance of the containment building considering voids and deterioration, the Ogaki shear strength equation, ASCE 43-05 low shear wall allowable lateral displacement ratio, and JEAC 4601 shear strain limit were compared and examined with the analytically derived failure point (ultimate point) in this study.
        4,000원
        2.
        2023.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 백남준의 위성아트 프로젝트 시리즈의 첫 방송인 1984년 <굿모닝 미스터 오웰> 에서 예술가, 미술관, 방송국 등 다양한 행위자들 사이에서 실질적인 협력관계로 끌어내는 과정 에서 그의 ‘쌍방향 소통’의 개념에 대하여 실증적인 성찰을 시도한다. 백남준은 ‘TV’를 예술 매체 로 활용한 시점인 1960년대부터 ‘쌍방향 소통’의 가능성을 고민해 왔고, 디렉터이자 플레이어로 서 이러한 개념을 제시하는 퍼포먼스를 이어왔다. 이후 위성방송 시스템이 상용화로 그 개념을 실천할 수 있는 기술적 환경이 조성되면서, 그는 스스로 플레이어 자리에서 내려와 1984년부터 2년을 주기로 위성아트 프로젝트 3부작을 제작하였다. 이러한 그의 탐구와 실험들이 위성아트 프로젝트에서 다층적 협력관계를 구축하는 논리적 기반이 되었음을 <굿모닝 미스터 오웰>을 중 심으로 살펴보고자 한다.
        7,800원
        3.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, multilayered SnO nanoparticles are prepared using oleylamine as a surfactant at 165oC. The physical and chemical properties of the multilayered SnO nanoparticles are determined by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Interestingly, when the multilayered SnO nanoparticles are heated at 400oC under argon for 2 h, they become more efficient anode materials, maintaining their morphology. Heat treatment of the multilayered SnO nanoparticles results in enhanced discharge capacities of up to 584 mAh/g in 70 cycles and cycle stability. These materials exhibit better coulombic efficiencies. Therefore, we believe that the heat treatment of multilayered SnO nanoparticles is a suitable approach to enable their application as anode materials for lithium-ion batteries.
        4,000원
        4.
        2021.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three μm-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 oC molten metallic glass.
        4,000원
        5.
        2021.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Welding is the most widely used technology for manufacturing in the automobile, and shipbuilding industries. Fiber laser welding is rapidly introduced into the field to minimize welding distortion and fast welding speed. Although it is advantageous to use finite element analysis to predict welding distortion and find optimized welding conditions, there are various heat source model for fiber laser welding. In this study, a welding heat source was proposed using a multi-layered heat source model that encompasses most of the existing various welding heat source models: conical shape, curved model, exponential model, conical-cylindrical model, and conical-conical model. A case study was performed through finite element analysis using the radius of each layer and the ratio of heat energy of the layer as variables, and the variables were found by comparing them with the actual experimental results. For case study, by applying Adaptive simulated annealing, one of the global optimization algorithms, we were able to find the heat source model more efficiently.
        4,000원
        6.
        2020.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 최근 신소재 단열재로 주목받고 있는 실리카 에어로겔을 이용하여 현재 사용되고 있는 다겹보온커튼의 단점을 보완하고 보온성을 유지 및 향상시킬 수 있는 새로운 조합의 다겹보온커튼을 제작 하여 현장에 설치함으로써 보온성과 경제성을 분석하고자 한다. 실험에 사용된 다겹보온커튼은 실리카 에어로겔이 함유된 부직포를 사용하여 2가지의 조합으로 제작하였으며 시중에 판매, 사용되고 있는 관행 다겹보온 커튼과의 차이에 따른 온습도변화와 연료소비량을 측정하여 비교분석하였다. 실험결과 단동온실과 연동온실에서 다겹보온커튼 차이에 따른 온습도변화는 미세하게 나타났으나, 거의 비슷한 온습도 값을 유지하였다. 이는 실리카 에어로겔을 이용한 다겹보 온커튼이 관행 다겹보온커튼에 비해 온습도 제어 측면에서 문제가 없음을 나타냈다. 난방에너지 비교분석 결과, 실리카 에어로겔을 이용한 다겹보온커튼이 관행 다겹보온커튼에 비해 연료소비량은 단동온실에서 약 15%, 연동온실에서 약 20% 의 연료소비량을 절감한 것으로 나타나 온실의 규모와 사용기 간이 증가함에 따라 난방에너지는 절감될 것으로 판단된다. 실리카 에어로겔 이용 다겹보온커튼이 관행 다겹보온커튼에 비해 통기성과 보온성이 증가되는 것이 확인되었다. 그러나, 연동온실에서 사용된 다겹보온커튼은 관행 다겹보온커튼에 비해 무게가 증가하고 뻣뻣하여 시공성과 작동성이 떨어지는 것을 확인할 수 있었다. 이에 단동온실에서 사용된 다겹보온 커튼에서는 개선사항을 적용하였다. 내부단열재의 교체를 통해 두께를 감소시키고 뻣뻣함을 개선함으로써 농가가 사용하 기에 충분한 가능성이 있다는 것을 확인하였다.
        4,000원
        7.
        2020.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        All of the languages in the cultural and linguistic Sinosphere display the phenomenon of borrowing Han characters and Han radicals to form their own scripts. The Nom Viet is no exception. When studying the structure of Nom Viet, scholars often use Han characters as the basis to analyze the structure of the Nom characters and divide them into different categories. This approach is applicable to the vast majority of Nom characters. However, in practice, when studying the processes of creating and using characters through many Nom texts, it is found that some Nom characters are formed on the basis of pre-existing Nom characters. This category of Nom characters, for a long time, has not won the attention of scholars. Surveying over 50 different Nom works, this article has collected 25 Nom characters with a multi-layered structure, which we call the derivative Nom category. By analyzing the components that directly make up these Nom characters and relying upon new research results on Chinese grammatology, the article will analyze and specify the internal structure of these Nom characters. The article has classified and presented the model of these Nom scripts. In addition, the separation of elements directly forming the characters has shown the process of acculturation of Chinese characters in Vietnam. It can be seen that the number of Nom derivatives is not large. However, their presence has more or less provided new materials for studying the structure of the Nom characters. Hopefully, the analysis in this article will contribute to shedding light on the current theoretical issues regarding the structure of the Nom Viet.
        6,000원
        9.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        해저 파이프라인은 자원개발을 포함한 에너지산업 및 철강산업과 연계한 고부가가치 산업으로서 상당한 관심을 받아왔다. 해저 파이프라인의 설계와 설치 프로젝트 수행을 위해서는 다양한 핵심요소기술들이 필요하다. 특히, 해저 파이프라인의 안전한 운영을 위해서는 예비커미셔닝을 통한 철저한 사전검증과정이 필수 불가결한 부분이다. 해저 파이프라인 예비커미셔닝 과정 중 하이드로테스팅 공정은 파이프라인 주위 온도변화에 크게 영향을 받는 것으로 알려져 있으나 이에 관한 이론적, 수치해석적 접근방법을 활용한 연구는 미미한 편이다. 본 연구에서는 해저 파이프라인의 예비커미셔닝 과정 중 하이드로테스팅 공정에 대해 과도열전달 해석법을 활용하여 내부 온도변화량 산정 및 이를 활용한 파이프라인 내부 압력변동량 예측법을 제시하였고 예측된 결과를 현장 실계측 데이터와 비교·검토하여 그 유효성을 입증하였다. 제안된 해석절차는 해저 파이프라인 설치 프로젝트 수행 사전단계에서부터 파이프라인 열전달 시뮬레이션을 통해 압력변동량 예측을 가능하게 함으로써 해저 파이프라인 설치 프로젝트의 생산성 향상에 크게 기여할 것으로 사료된다.
        4,000원
        10.
        2019.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        To calculate proper seismic design load and seismic design category, the exact site class for construction site is required. At present, the average shear-wave velocity for multi-layer soil deposits is calculated by the sum of shear-wave velocities without considering of vertical relationship of the strata. In this study, the transfer function for the multi-layered soil deposits was reviewed on the basis of the wave propagation theory. Also, the transfer function was accurately verified by the finite element model and the eigenvalue analysis. Three methods for site period estimation were evaluated. The sum of shear-wave velocities underestimated the average shear-wave velocities of 526 strata with large deviations. The equation of Mexican code overestimated the average shear-wave velocities. The equation of Japanese code well estimated the average shear-wave velocities with small deviation.
        4,000원
        11.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, a method to remove residual powder on a multi-layered graphene and a new approach to transfer multi-layered graphene at once are studied. A graphene one-step transfer (GOST) method is conducted to minimize the residual powder comparison with a layer-by-layer transfer. Furthermore, a residual powder removing process is investigated to remove residual powder at the top of a multi-layered graphene. After residual powder is removed, the sheet resistance of graphene is decreased from 393 to 340 Ohm/sq in a four-layered graphene. In addition, transmittance slightly increases after residual powder is removed from the top of the multi-layered graphene. Optical and atomic-force microscopy images are used to analyze the graphene surface, and the Ra value is reduced from 5.2 to 3.7 nm following residual powder removal. Therefore, GOST and residual powder removal resolve the limited application of graphene electrodes due to residual powder.
        4,000원
        12.
        2018.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        TiN and CrN thin films are among the most used coatings in machine and tool steels. TiN and CrN are deposited by arc ion plating(AIP) method. The AIP method inhibits the reaction by depositing a hard, protective coating on the material surface. In this study, the characteristics of multi-layer(TiN/CrN/TiN(TCT), CrN/TiN/CrN(CTC)) are investigated. For comparison, TiN with the same thickness as the multilayer is formed as a single layer and analyzed. Thin films formed as multilayers are well stacked. The characteristics of micro hardness and corrosion resistance are better than those of single layer TiN. The TiN/CrN peak is confirmed because both TCT and CTC are formed of the same component(TiN, CrN), and the phase is first grown in the (111) direction, which is the growth direction. However, the adhesion and abrasion resistance of the multilayer films are somewhat lower.
        4,000원
        13.
        2017.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The oyster mushroom cultivation house typically has multiple layers of growing shelves that cause the disturbance of air circulation inside the mushroom house. Due to this instability in the internal environment, growth distinction occurs according to the area of the growing shelves. It is known that minimal air circulation around the mushroom cap facilitates the metabolism of mushrooms and improves their quality. For the purpose of this study, a CFD analysis FLUENT R16 has been carried out to improve the internal environment uniformity of the oyster mushroom cultivation house. It is found that installing a section of the working passage towards the ceiling is to maintain the internal environment uniformity of the oyster mushroom cultivation house. When all the environment control equipment – including a unit cooler, an inlet fan, an outlet fan, an air circulation fan, and a humidifier – were operated simultaneously, the reported Root Mean Square (RMS) valuation the growing shelves were as follows: velocity 23.86%, temperature 6.08%, and humidity 2.72%. However, when only a unit cooler and an air circulation fan operated, improved RMS values on the growing shelves were reported as follows: velocity 23.54%, temperature 0.51%, and humidity 0.41%. Therefore, in order to maintain the internal environment uniformity of the mushroom cultivation house, it is essential to reduce the overall operating time of the inlet fan, outlet fan, and humidifier, while simultaneously appropriately manage the internal environment by using a unit cooler and an air circulation fan.
        4,000원
        14.
        2015.12 구독 인증기관·개인회원 무료
        15.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Multi-layered metal sheet for electromagnetic interference(EMI) shielding purpose has been designed using metal sheet, PET & DST stacking and laminating technology. Also, an automatic manufacturing system is developed. This metal sheet with multi-layered structure is an effective shield against EMI that can not shield completely by single metal sheet. And the developed automatic manufacturing system can stack and lamination thin metal sheets without any wrinkles.
        4,000원
        16.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        버섯은 생육에 적합한 온도 및 수분이 유지되면 자연 상태에서도 원활하게 발생할 수 있지만 이러한 기간은 1년중 극히 일부에 지나지 않는다. 따라서 오늘날 시장에 유통되는 버섯은 대부분 인공적으로 조절된 환경에서 생산된 것으로 볼 수 있다. 기존 연구자들의 보고에 의하면 버섯재배사 내부의 온도 및 습도에 대한 불균일성이 큰 것으로 알려져 있고, 이를 극복하기 위한 다양한 기술들이 개발되고 있다. 본 연구에서는 느타리버섯 균 상재배사 내부에 공기를 위로 토출 할 수 있는 대류팬을 설치하고, 이에 따른 느타리버섯 균상재배사 내부의 위치에 따른 온도 및 습도 균일성을 향상하기 위하여 수행하였다. 시험기간 동안의 외기온도는 5.2~20.4oC까지 변화하였고, 외기 상대습도는 40~100%까지 변화하였다. 외기온도의 변화에 영향을 받아 버섯재배사 내부의 온도도 13.3~18.4oC 변화하였지만 동일한 기록 시간의 균상 위치에 따른 온도 차이는 0.2~1.3oC로 매우 균일하게 유지 되는 것으로 나타났다. 버섯재배사 내부의 상대습도도 외기 상대습도 변화에 영향을 받아 82~96%로 변화하였지만 동일한 기록시간의 균상 위치에 따른 상대습도 변화의 차이는 2~7%로 나타났고, CO2 농도 변화는 약 575~731ppm으로 목표로 하는 1,000ppm 이하로 유지되는 것으로 나타나 내부 대류팬의 설치로 버섯재배사 내부의 균일한 환경관리가 가능한 것으로 나타났다.
        4,000원
        19.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        For each cable component in a cable dome structure, pre-tension is needed for stability of whole the structure. The summation of these pre-tension at each joint should be zero to achieve the self equilibrium structure. The first step in cable dome structure analysis is to find the ratio of pre-tension in each member which can produce a stable and structure on self-equilibrium. In this paper, a new method based on the basic principle of closed force polygon for equilibrium system is proposed for the determination of self-equilibrium mode of cable dome structure. A single layer cable dome and two multi layer type domes have been analyzed. The ratios of cable members are determined by the presented method, and check the validation of the results by numerical calculation.
        4,000원
        20.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to prevent the high velocity bullet from penetration, aluminum alloy and RHA(Rolled Homogeneous Armour) steel, which have a high tensile and compressive strength, are usually used as the bullet-proof armor material. Although these materials have a good bullet proof performance, but not an area density which is a weight increasing factor of bullet-proof armor. Therefore, Mg(magnesium) alloy is a promising substitute for the traditional bullet-proof armor material due to the relatively low areal density. The spatial efficiency of Mg alloy, however, is inferior to the traditional material's, which is a volume(thickness) increasing factor of bullet-proof armor. In this study, we select the multi-layered hybrid armor which consist of Ceramic, with a high strength; Mg alloy, with a low areal density; Kevlar, with a high tensile strength-to-weight ratio; in order to make up for the poor spatial efficiency of Mg alloy. By predicting V50 of the multi-layered armor against 9mm FMJ(Full Metal Jarket). we show that the multi-layered armor have the capability in improving bullet-proof performance in the respect of the areal density, but also the spatial efficiency.
        4,000원
        1 2 3