A60 급 갑판 관통 관은 선박과 해양플랜트에서 화재사고가 발생할 경우 화염의 확산을 방지하고 인명을 보호하기 위해 수평구조에 설치되는 방화장치이다. 본 연구에서는 다양한 대리모델과 다중 섬유전자 알고리즘을 이용하여 A60 급 갑판 관통 관의 방화설계에 대한 이산변수 근사최적화를 수행하였다. A60 급 갑판 관통 관의 방화설계는 과도 열전달해석을 통해 평가하였다. 근사최적화에서 관통 관의 길이, 지름, 재질, 그리고 단열재의 밀도는 이산설계변수로 적용하였고, 제한조건은 온도, 생산성 및 가격을 고려하였다. 대리모델 기반의 근사최적설계 문제는 제한조건을 만족하면서 A60 급 갑판 관통 관의 중량을 최소화할 수 있는 이산설계변수를 결정하도록 정식화 하였다. 반응표면모델, 크리깅, 그리고 방사기저함수 신경망과 같은 다양한 대리모델이 근사최적화에 사용되었다. 근사최적화의 정확도를 검토하기 위해 최적해의 결과는 실제 계산 결과와 비교하였다. 근사최적화에 사용된 대리모델 중 방사기저함수 신경망 모델이 A60 급 갑판 관통 관의 방화설계에 대해 가장 정확한 최적설계 결과를 나타내었다.

In aluminum electrolysis, sodium penetration into carbon cathodes is considered as the main cause of cell failure and efficiency loss, but the detailed mechanism is still not definitely clear. Since the macroscopic properties of material depend on the microscopic structures, a large-scale atomistic model of anthracite cathodes was constructed to represent several important structural characteristics. Combined with Monte Carlo and molecular dynamics simulations, the adsorption and diffusion behaviors of sodium were investigated, respectively. The results suggest that sodium adsorption mainly occurs in the larger micro-pores with the range of 10–19 Å, while it accords well with to type-I Langmuir adsorption model. The sodium is found to be preferentially adsorbed in arch-like structures with 5- or 7-membered rings or around heteroatom, especially oxygen. Moreover, the movements of sodium through carbon matrix mainly depend on the continuous diffusive motion while most sodium particles tend to be trapped in voids with small mobility. The calculated transport diffusion coefficient is equal to 6.132 × 10− 10 m2/ s, which is in outstanding agreement with experimental results. This fundamental research would contribute to the understanding of sodium penetration mechanism and the optimization of cathode industry in the future.

필로티는 현대건축에서 주차공간의 활용, 보행자의 통로 등 여러 가지 이점을 가지고 있기 때문에 아파트와 오피스텔과 같은 고층건축물에 많이 사용되고 있다. 이러한 고층건축물의 필로티 형태 특성상 강풍이 불 때 바람이 집중되기 때문에 필로티 천장과 벽 면에 위치하고 있는 외장재 및 주골조가 파손되기 쉽다. 그리고 이러한 외장재 및 주골조의 탈락으로 인해 2차 피해가 발생할 우려가 있다. 하지만 건축구조기준(KBC-2016)에서는 고층건축물에 대한 천장 및 벽면의 풍압계수만을 제시할 뿐 필로티에 대한 기준이 명시 되어 있지 않다. 본 논문은 고층건축물에서 사용되는 필로티의 종류로서 관통형, 개방형 필로티를 선정하였고, 필로티의 폭과 깊이를 변수로 하여 풍동실험을 진행하였다. 그리고 변수에 따른 풍압계수의 특성을 파악하였고 비교 및 분석하였고 본 논문의 실험결과를 통 하여 필로티 설계 시 활용할 수 있는 주골조 및 외장재 설계용 풍압계수를 제시하였다.

속도 4km/s 이상인 초고속 제트의 관통 깊이는 제트와 표적의 밀도 비를 통해 기술된다. 반면에 동일한 밀도인 경우 표적들 사이의 강도 차이는 관통 깊이 차이에 영향을 주지 않는다. 본 연구는 초고속 제트의 “강도 무관성”에 관한 연구를 다룬다. 이를 위해 초고속 성형작약탄두 제트(SCJ)에 의해 발생된 크레이터 압력의 변화를 유한요소해석을 통해 계산하고, 철강 소재의 polymorphic 상변이 발현 가능성을 조사하였다. 결과적으로 초고속 제트는 표적 크레이터에 polymorphic 상변이를 일으킬 수 있고, 이로 인한 표적의 파괴 인성 저하가 강도 무관성의 원인으로 예측된다.

최근 필로티는 공간의 활용도나 미관상의 이유로 많이 사용되고 있다. 필로티는 외벽보다는 안쪽에 위치하나 외기에 접하는 형태로 강한 바람이 불 때, 바람길이 형성되고 강한 압력을 받아 필로티의 천장 및 벽면 부분의 외장재가 탈락하는 피해가 발생한다. 현재 건축구조기준(KBC-2016)에서는 필로티 건축물에 대한 천장 및 벽면의 풍압계수가 제시되어있지 않아 필로티 부분의 주골조 및 외장재에 대한 구조설계에 어려움이 있다. 이에 본 논문에서는 저층구조물의 관통형 필로티에 대한 풍압실험을 진행하여 풍압계수를 산출하였다. 실험 모형의 변수는 필로티의 높이와 폭으로 두었으며 변수에 따라 풍압계수를 산정하고 풍압분포의 변화를 비교·분석하 였다. 따라서, 필로티의 여러 변수 중 가장 불리한 풍압계수를 제시하여 이를 주골조와 외장재 설계 시 기초자료로 제공하고자 한다.

본 논문은 Shaped charge jet(SCJ)의 관통 과정을 유한요소해석을 통해 모사하여 제트 입사속도, 관통률 그리고 관통량 증분과 같은 물리량들을 획득하였다. 이 물리량들을 hydrodynamic 이론에 적용하여 입사 제트 속도의 효율을 분석한 결과, 입사 속도가 빠른 제트의 관통 효율은 이어지는 느린 제트에 비해 높은 것을 확인하였다. 이 효율은 hydrodynamic limit (HL) 미만인 제트인 경우 큰 폭으로 감소하였다. 한편, 시간에 따른 관통량 증분과 제트 소모량의 비교는 SCJ의 이론적인 관통현상 분석을 위해서는 길이 연장 효과를 고려해야함을 보였다.

The bean bug, Riptortus pedestris, is one of major hemipteran pests against the soybean, Glycine max in Korea. In previous study, it was suggested that water-taking in the first instar nymphal stage of R. pedestris is certainly necessary for successful ecdysis and their survival. To investigate water-taking behavior of the first instar nymphs of R. pedestris on plant, electrical penetration graphic patterns were analysed while R. pedestris fed on the napa cabbage leaf, Brassica rapa subsp. pekinensis by using EPG system. In the result, a X-waveform was dominantly observed for average 42.0 min out of total recording time (120 min). There was significant positive correlation (r = 0.457, P = 0.000452, n = 55) between body weight increase and cumulative durations of X-waveform. In addition, histological observation of cross-sections indicated that stylet tip in the plant tissue during X-waveform period is located nearby xylem cells, suggesting that X-waveform is closely related to xylem sap feeding behavior of R. pedestris in plant.

Graphene oxide (GO) laminate is a new promising material for water purification system, which has extraordinary permeability only for water molecule. It consists of numerous nano-channels, in which water molecules could be nano-confined, resulting in slip of the molecules for very fast transportation speed. In this study, water penetration rate via different thickness of GO membrane according to driven pressures are measured experimentally, so that speed of water molecules and permeability are evaluated. Generally, water penetration rate via a membrane with macroscopic-sized channel increases linearly with pressure difference between up and bottom side of the membrane, but that via GO membrane approaches asymptotic value (i.e. saturation) as like a log function. Moreover, the permeability of GO membrane was observed in inverse proportion to its thickness. Based on the experimental observations, a correlation for volume flux via GO membrane was suggested with respect to its thickness and external pressure difference.

본 연구는 티모시 건초와 농후 사료 위주의 사료를 급여한 한우 씨수소 정소상체 정자 체외수정 효율 조사를 통해 정자의 활용 가능성을 조사하였다. 농후 사료는 체중의 1.8%를 급여하고 양질의 티모시 건초를 자유채식 시킨 14개월령 거세우의 정소에서 분리된 정소상체 미부의 정자를 회수하고 동결 흉해 후 체외수정을 실시한 결과는 다음과 같다. 웅성전핵과 자성전핵이 형성(2PN)된 난자는 정상수정으로, 1개의 전핵(1PN), Expanded Sperm Head (ESH), Polyspermy 형태는 비정상적인 수정의 형태로 평가하였다. 정상적으로 수정된 난자의 비율은 정소상체 정자의 경우 전체 침투율은 49.7% 그리고 정상적인 2PN을 가진 난자는 18.5%를 보였으며, 대조구 정자의 전체 침투율은 54.4%로서 정소상체 정자 보다 높은 결과를 보였으나 유의적인 차이를 보이지는 않았다. 정상적으로 2PN을 형성한 비율은 36.7%로서 정소상체 정자를 이용한 정자 보다 높았으나 유의적인 차이는 없었다. 체외수정 후 발달률 조사에서 정소 상체 정자의 분할률은 81.2%, 대조구 정자는 82.7%로 유사한 결과를 보였으나, 배반포 발달률은 정소상체 정자 24.4%와 대조구 정자 12.2%로 정소상체 정자를 사용한 난자의 발달에서는 유의적으로 높았다(p<0.05).

In this study, we examined sperm penetration and blastocyst developmental rate of oocytes to determine fertilizability of cauda epididymal spermatozoa in Hanwoo bull. One testicle with epididymides were castrated from one Hanwoo bull (14 months of age) and transported to laboratory. Spermatozoa recovered from cauda epididymis by mincing with semen extender (Optixcell, IMV, France) and cryporeserved in liquid nitrogen tank until use. As control, frozen Hanwoo semen was used. Cumulus oocyte complexes (COCs) were collected from follicles (2-8 mm) of slaughtered ovaries and 10 to15 COCs were matured in 50μl droplet with M-199 media supplemented with 10% fetal bovine serum, 10μg/ml FSH, 10μg/ml LH, 10μg/ml EGF for 22 to 24 hours in a humidified atmosphere of 5% CO2 in air. After maturation of COCs, matured COCs were co-incubated with cauda epididymal spermatozoa in 100μl droplet in modified Brackett and Oliphant media supplemented with 2.5 mM theophylline for 12 or 18 hours under 5% CO2 in air. Sperm concentration was adjusted to 5 × 106cells/ml. After IVF for 18 hours, presumptive zygotes were cultured in modified synthetic oviductal fluid with 1mM glutamine, 12 essential amino acids, 10 μg/ml insulin under 5% CO2, 5% O2 in air. In experiment 1, we examined sperm penetration rate at 12 hours of IVF of frozen-thawed epididymal sperm. Total penetration rate among cauda epididymis and control were not significantly different (mean±standard error, cauda epididymis and control vs. 49.7±11.3 and 54.4±12.8%) In experiment 2, cleavage and blastocyst development rate were evaluated at day 2 and day 8 after IVF for 18 hours. Cleavage rate among cauda epididymis and control was similar different (cauda epididymis and control vs. 81.2±3.4 and 82.7±2.5%). However, blastocyst developmental rate of cauda epididymis group was significantly higher than that of control group (cauda epididymis and control vs. 24.4±1.6 and 12.2±2.8%, p<0.05). In conclusion, cauda epididymal spermatozoa in Hanwoo bull has high fertilizability and embryo development. Cauda epididymal sperm can be used as an alternative to ejaculated frozen sperm in vitro.

In our previous study, exogenous plasminasminogen activators (PAs) influenced to fertility of boar spermatozoa via reduction of zona pellucida (ZP) resistance against protease and number of sperm binding ZP. plasminasmin (plasmin), is converted by PAs, is an important enzyme to degrade extracellular matrix and it is closely associated with fertilization process. Therefore, the aim of present study was to confirm changes of sperm penatration and ZP solubility by plasmin during in vitro fertilization (IVF). The cumulus-oocyte complasminexes (COCs) were aspirated from the antral follicles 3-6 mm in diameter and matured for 44 hours. Then, the cumulus cells were removed and denuded oocytes were co-incubated with spermatozoa for 18-20 hours in IVF medium containing 100 ng/ml plasmin. The number of sperm binding ZP and ZP solubility were measured using hoechst 33342 and 0.5% (w/v) pronase, respectively. Aceto-orcein stain was used to assess fertilization parameters. In results, sperm penetration did not affect by plasmin treatment during fertilization. Hoewever, treatment of plasmin decreased monospermic fertilization and IVF efficiency compared with control group (p<0.05). Furthermore, the number of penetrated sperm and pronucleus formation per zygote in plasmin group was significantly increased compared with control group (p<0.05). Despite of reduced monospermic fertilization by plasmin treatment, the number of sperm binding ZP was significantly higher in non-treated zygote than plasmin-treated zygote (p<0.05). Similar with previous study, ZP digestion time was reduced by plasmin treatment (p<0.05). These findings shown that plasminasmin during fertilization enhance the penetration of spermatozoa into ZP via increasing of ZP solubility and it was correspond with our previous results that fertility of spermatozoa during IVF was increased by exogenous urokinase-type PA treatment via sperm-ZP binding and increase of ZP solubility. Therefore, during the fertilization process, plasmin that is converted by PAs from oviduct epithelial cells might be closely associated with degradation of ZP proteins for penetration of sperm. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (Ministry of Education) (2016R1D1A1B03931746).

Various pilotis are installed in the lower part of high rise buildings. Strong winds can generate sudden airflow around the pilotis, which can cause unexpected internal airflow changes and may cause damage to the exterior of the piloti ceiling. The present study investigates the characteristics of peak wind pressure coefficient for the design of piloti ceiling exteriors by conducting wind pressure tests on high rise buildings equipped with penetration-type and end-type pilotis in urban and suburban areas. The minimum peak wind pressure coefficient for penetration-type piloti ceilings ranges from –2.0 to -3.3. Minimum peak wind pressure coefficient in urban areas was 30% larger than in suburban areas. In end-type piloti ceilings, maximum peak wind-pressure coefficient ranges from 0.5 to 1.9, and minimum peak wind-pressure coefficient ranges from – 1.3 to -3.6. With changes in building height, peak wind pressure coefficient decreases as the aspect ratio increases. Peak wind-pressure coefficient increases with taller pilotis. On the other hand, when piloti height decreases, the absolute value of the minimum peak wind pressure coefficient increases.

Underground cavities are frequently taking place in urban areas due to soil loss caused by structural defects of underground buried pipes. In this study, a field experimental program was conducted to detect ground condition using the electrical resistivity survey and the pneumatic cone penetration test. In addition, we proposed a method to estimate the weighted mean resistivity value by quantifying the electrical resistivity measurements through image analysis in order to compare the results of pneumatic cone penetration test. Consequently, it was found that as the weighted average resistivity value decreased, the smaller the N-value (penetration depth per blow number) from the pneumatic cone penetration test results. Based on the limited number of field experimental measurements, the correlation between weighted average resistivity value and the N-value of pneumatic cone penetration test is deemed promising in assessment of ground conditions associated with developing underground cavitation.

Generally, remarkable amount of Reclaimed Asphalt Pavement (RAP) is produced annually by pavement surface cutting: due to early distress on asphalt pavement layer and remodelling construction work on existing aged-asphalt pavement layer. In South Korea, various types of research on proper and optimized RAP material development and field application (including evaluation process) are performed because of increase of existing road maintenance budget and technology. The major material of RAP is recycled aggregate coated with aged asphalt binder. The advantages of application of RAP on asphalt pavement are recyclable material proportion can be increased due to re-using of existing aggregate and eco-friendly characteristics. However, more amount of specific additives (and/or agent) needs to be implemented during production with increase amount (and/or proportion) of RAP on virgin asphalt material inevitably. This action is highly needed because of recovery of penetration grade and absolute viscosity of final production. The required amount of additives tends to be vary based on different aging level of RAP, amount of RAP and types of virgin asphalt binder. But it is well known that required amount of additives tends to be increased with increase of RAP proportion compared to virgin asphalt mixture. Moreover, it also should be known that mere increase of additives on RAP asphalt can provide negative effect on its quality and mechanical performance. In this study, high penetration grade asphalt binder: contains between 200 and 300 level of penetration grade, was used for producing RAP asphalt mixture with small amount of required additive application. After the sample preparation, various characteristics of RAP asphalt were analysed with extensive experimental work.

Magnetic resonance imaging (MRI) technique has recently been applied in agriculture and food science. It has potential to visualize internal structure of foods in nondestructive way and provides spatial information which could make reconstruct of three-dimension. MRI system also has great advantage for tracking water in beans or seeds. This study intends to analyze the changes of water distribution of coffee beans during water up-taking process. Samples used in the experiment were ‘Robusta’ coffee beans (Vietnam G1, Scr18 polish). A 30mm diameter plastic disposable test tube was used to hold bean during water up-take process. The oil column was placed next to the tube to get and to use as a reference signal. The magnetic resonance imaging system which installed at Institution for Agricultural Machinery & ICT Convergence in Chonbuk National University was used to obtain magnetic resonance (MR) image data sets. 30 images are included in each image data sets with ‘Axial’ image plane direction. In experiment, we used ‘Gradient Echo 3D’ pulse sequence. The water uptake process was performed for 150 minutes and acquired image data sets in every 10 minutes. This study showed some coffee beans which extracted as region of interest (ROI) from each images to study the water uptake process.

소나무재선충과 근연종인 Bursaphelenchus 속 2종간의 매개충 채내 침입력과 경쟁력을 비교 실험하였다. 공시충은 Bursaphelenchus xylophilus (이하 Bx), B. mucronatus (이하 Bm), B.thailandae (이하 Bt) 선충 3종과 솔수염하늘소 (Monochamus alternatus)와 북방수염하늘소 (M. saltuarius) 2종을 사용하였다. 매개충 번데기에 선충 3종을 10,000 마리씩 단독 또는 혼합접종을 하고, 우화 후 체내 선충 개체수를 조사한 결과, 솔수염하늘소에서는 Bx, Bm, Bt가 각각 2,283마리, 1,575마리, 3,083마리로써 Bt의 침입력이 가장 높게 나타났다. Bx+Bt 처리 시에는 Bx 24%, Bt 76%, Bx+Bm 처리 시, Bx 68%, Bm 32% 비율로 조사되어 Bt>Bx>Bm 순으로 침입력이 강한 것이 확인되었다. 북방수염하늘소 에서 Bx, Bm의 침입력을 비교한 결과 Bx는 2,120마리, Bm 1,730마리로 솔수염하늘소에서와 유사한 결과를 나타내었다. 이로써 선충 종간 침입력은 다양하며 이는 매개충 종과는 무관함을 알 수 있다.

Differences in sugar and salt penetrarion rates of radish depending on size and concentration of solution were examined. 2x2x2 and 4x4x4 cm cube-shaped radish examined in different pickling condition (salt 2, 4, 6, 8% and sugar 5, 10, 15, 20% brix). After 12hr storage, Salt penetration rate of radish cut into 2x2x2 cm was faster than that of 4x4x4 cm in all salt solution. Size dependent sugar penetration showed same tendency with size dependent salt penetration. Also, increase in salt and sugar concentration led to increase in salt and sugar permeation rate.