Painting pretreatment is an important task in determining the life of painting as it removes rust or foreign substances from the painting surface and gives adhesion between the painting surface and the painting surface. Since painting pretreatment is an important task, IMO strictly requires that the painting pretreatment surface be maintained at a Sa 2.5 grade and the surface roughness is 30μm~75μm. Painting pre-processing is an important task that determines the lifespan of a painting, but it is done through visual inspection by the inspector, and the quality varies depending on the inspector. In this study, in order to develop a quality measurement system for the painting pretreatment surface, Matlab2023b was used to determine the range of appropriate quality brightness by comparing the brightness of the painting pretreatment surface and surface roughness.

Since 1996, spent filters from the Kori unit 1 have been stored in enclosed areas such as the auxiliary building filter room. To dispose of these spent filters at a disposal facility, it is necessary to retrieve and package them according to the disposal criteria. The Kori unit 1 filter room is a 2.5- meter deep hole with 227 spent filters stored indiscriminately by type and radiation level. Furthermore, the exposure dose rate measurements revealed exceed 10 mSv/h, making it a challenging environment for workers. Therefore, in this study, we have developed a ‘Remote Processing System for Spent Filter Handling’ to minimize worker exposure and ensure safety throughout the entire process, from filter retrieval to radiation measurement, sample collection, compression, and packaging. We have completed performance testing through laboratory validation. The ‘Remote Processing System for Spent Filter Handling’ consists of four main components: a robot system for retrieving spent filters from the filter room, a transfer mechanism for moving spent filters to the lower area, a core ring device for sample collection, and finally, a compression/ packaging unit. The laboratory validation performance testing was conducted by installing these devices in a structure simulating the Gori-1 reactor filter room. The results confirmed that all processes, from spent filter retrieval to packaging, can be remotely operated without the need for filter drops or worker intervention. Through the laboratory validation, some areas for improvement were identified. These improvements should be taken into consideration when producing the system for future on-site applications.

구조물의 안정성 및 이상 징후 판단에 있어 균열의 발생 여부와 진전 정도는 가장 기본적인 조사 항목이다. 본 연구 에서는 일반적인 스마트폰을 통해 균열 이미지를 촬영하고 이로 부터 균열 검출과 크기를 산정하는 균열 분석 시스템을 개발하 였다. 모폴로지 기법을 적용하되 투영변환 및 3차회선 보간, 히스토그램 기반의 명도 입계값 산정 기법을 적용함으로서 이미지 보정과 노이즈 제거 과정을 통한 효과적 균열 검출이 가능하였다. ArUco 마커를 통해 손쉽고 경제적인 균열 크기 산정이 가능 하였으며, 스마트폰 앱과 클라우드 서버 기반의 이원화 분석시스템을 통해 손쉬운 현장 적용성 및 처리 시간 단축, 세부 균열의 추적관리 가능성을 확인하였다. 개발 시스템을 이용한 실내 성능 평가를 수행한 결과, 균열 측정 오차는 0.03㎜ 미만으로 나타 났으며 조건별 다수 측정 결과에서 높은 재현성이 확인되었던바, 개발된 균열 분석 시스템의 정확성 및 현장 적용성을 예상할 수 있었다.

The type of radioactive waste that may occur in the process of NPP dismantling can be classified into solid, liquid, gas, and mixed waste. Most of the radioactive waste generated during the dismantling of a NPP is metal solid waste, but liquid radioactive waste is also a very important factor in terms of radiation environmental impact assessment. In the case of liquid radioactive waste, it is necessary to calculate the generation amount in order to design liquid radioactive waste processing system of Radioactive Waste Treatment Facility (RWTF). Depending on the amount of liquid radioactive waste generated, the type of liquid radioactive waste processing system included in the RWTF is different. In addition, in order to apply to the domestic RWTF, it is important to secure the site area occupied by the each system, the liquid radioactive waste treatment capacity of the system, and how to secure circulating water used for dilution and discharge of liquid radioactive waste. Therefore, this review aims to suggest an optimal method for the treatment system for liquid radioactive waste included in RWTF of Wolseong.

CYPRUS is a web-based waste disposal research comprehensive information management program developed by the Korea Atomic Energy Research Institute over three years from 2004. This program is stored as existing quality assurance documents and data, and the research results can be viewed at any time. In addition, it helps to perform all series of tasks related to the safety evaluation study of the repository in accordance with the quality assurance system. In the future, it is necessary to improve the user convenience by clarifying the relationship between FEP and scenarios and upgrading output functions such as visualization and automatic report generation. This purpose of this study is to research and develop the advanced program of CYPRUS. This study is based on building FEP, DIM and scenario databases. It is necessary to develop an algorithm to analyze and visualize the FEP, DIM and scenario relationship. This project is an integrated information processing platform for DB management and visualization considering user convenience. The first development goal is to build long-term evolutionary FEP, DIM, and scenarios as a database. The linkage by FEP item was designed in consideration of convenience by using a mixed delimiter of letters and numbers. This design provides information on detailed interactions and impacts between FEP items. Scenario data lists a series of events and characteristic change information for performance evaluation in chronological order. In addition, it includes information on FEP occurrence and mutual nutrition by period, and information on whether or not the repository performance is satisfied by item. The second development goal is to realize the relationship analysis and visualization function of FEP and scenario based on network analysis technique. Based on DIM, this function analyzes and visualizes interactions between FEPs in the same way as PID, RES, etc. In addition, this function analyzes FEP and DIM using network analysis technique and visualizes it as a diagram. The developed platform will be used to construct and visualize the FEP DB covering research results in various disposal research fields, to analyze and visualize the relationship between core FEP and scenarios, and finally to construct scenarios and calculation cases that are the evaluation target of the comprehensive performance evaluation model. In addition, it is expected to support the knowledge exchange of experts based on the FEP and scenario integrated information processing platform, and to utilize the platform itself as a part of the knowledge transfer system for knowledge preservation.

국제통증연구학회(IASP)에 따르면, 신경병증성 통증은 정상 조건에서 중추신경계에 유해한 정보를 전달하는 신경계 기능 장애로 특징 지워진다. 이런 통증은 말초 혹은 중추 신경계에 확인 가능한 병변이 있는 질환과 어떠한 신경에도 병변이 없는 상태에서 발생하는 상황으로 나누어 볼 수 있다. 두 가지 상황 모두 장기적이고 만성적인 변화과정을 겪게 되며, 결과적으로 신경계가 부적절하게 적응하여 치유되기 어려운 만성통증 증후군으로 발전할 수 있다. 그러나 이러한 통증 치료는 진단에서부터 치료까지의 과정이 어려운 탓에 현재까지도 특별한 해결방안이 부족한 실정이다. 최근 자기공명영상(fMRI), 양전자방출단층촬영법(PET), 광영상(optical imaging) 등 영상분석기술이 발달함에 따라 통증을 유발할 수 있는 유해 자극에 대한 중추신경계의 반응을 영상화하는 연구가 증가하고 있다. 이러한 영상 기법들을 통해 통증을 해석하고 처리하는 뇌 영역에서 시냅스 간 가소성 변화가 일어나고 있음을 확인하였으며, 신경병증성 통증을 비롯한 만성통증과 학습과의 상호 작용을 이해하는 데 많은 도움을 주고 있다. 본 연구는 병리적 통증의 기전과 통증 자극에 따른 뇌의 구조적, 기능적 변화에 대해 최근까지 밝혀진 연구들을 소개하고자 한다. 만성적 통증의 정의와 발생기전을 되짚고 새로운 연구 동향을 살펴보는 것은 통증을 완화할 수 있는 방안을 강구하는 데 도움이 될 것으로 사료된다.

Recently, automobile manufacturing companies, which are major customers of them, are requiring IATF 16949 (ISO/TS 16949) certification as a mandatory requirement to secure product quality. In particular, IATF 16949 : 2016, revised in October 2016, was reinforced product traceability requirements for production information management by lot in the production process. Therefore, small and medium-sized precision parts processing companies in the automobile industry are very difficult to survive due to quality and price competition for customers satisfaction. MES (Manufacturing Execution System) is required to solve this problem. However, small and medium sized precision parts processing enterprises are reluctant to introduce the MES which is not suitable for the manufacturing environment of them such as high cost and low utilization. Even if the system is introduced, it is difficult to operate and maintain the system because the lack of computer manpower. In this paper, we propose a method for building a lot tracking system for small and medium precision parts processing companies by reviewing relevant literature and analyzing cases. In addition, by managing the production history for each lot of the final product in the system, we will grasp the effect of reducing the quality failure cost obtained by minimizing the range of defect selection.

고성능 복합재료 제조에 사용되는 고온경화용 에폭시 수지 시스템의 성형성을 연구하였다. 테트라글리시딜 메틸렌 디아닐린계 에폭시 수지 시스템의 조성과 화학구조를 여러 가지 분석장비를 이용하여 분석하고 확인하였다. 이 수지 시스템은 보통의 작업온도 조건에서 시간 경과에 따른 점도 상승이 미미한 것으로 나타났다. 유전 경화 모니 터링 방법을 이용하여 선정한 수지 시스템의 경화거동을 연구하였다.

For the development of processed food for hypoglcemia, it is important to construct model system to confirm factors that reduce the glycemic index in real food. This study was to investigate the relationship between the gel model system and real food the high amylose type of segoami using response surface methodology. The independent variables were concentration (X1; 10, 15, 20, 25, and 30%) and steaming time (X2; 30, 35, 40, 45, and 50 min). The predicted glycemic index (Y1) was analyzed as a dependent variable. The regression of pGI was 0.7343, indicating that the model fits the data well in the prediction test. The predict glycemic index of the gel was in the range of 71.38 ~ 83.78, depending on the gel preparation conditions and predicted optimum condition was 23.7% gel concentration and 43.8 minutes of gelatinization. The predict glycemic index of rice gel were decreased with an increase of gel concentration, rather than the steaming time. In order to confirm the effect on in vitro digestibility in real food, the real food (Garraedduk) was prepared by applying the optimal conditions. As a result, there was no significant difference between the predicted value (77.1) and the experiment value (76.6). This result showed that the in vitro digestibility in real food can be predicted by applying the gel model system.

In our country, the number of coffee shops has steadily increased, reaching approximately 15,000 in 2013 from 1,254 in 2006. Adding to increase of coffee shops, customers' preference of roasted beans and extraction to ready-made coffee or instant coffee has lead to rapid expansion of roasted coffee market. In this study, the semi-rotating fluidized bed roaster prototype to reduce LPG consumption of the existing 60kg class large rotating fluidized bed roaster has been designed and retrofitted. In addition to the roaster prototype, processing system consist of bean automatic feeding equipment, debris sorting device, cooling device, cyclone collector, main control system etc. was developed. Also, the authors carrying out many measurements and tests such as LPG consumption, bean transfer time, debris sorting rate, cooling time and temperature, chaff collection rate for the various cases. As a result, the authors found that the semi-rotating fluidized bed roaster prototype can not only reduce LPG consumption, green bean transfer time, cooling time and temperature but also improve debris sorting rate, chaff collection rate of during coffee roasting