In this paper, we present a case study of developing MVIS (Machine Vision Inspection System) designed for exterior quality inspection of stamping dies used in the production of automotive exterior components in a small to medium-sized factory. While the primary processes within the factory, including machining, transportation, and loading, have been automated using PLCs, CNC machines, and robots, the final quality inspection process still relies on manual labor. We implement the MVIS with general- purpose industrial cameras and Python-based open-source libraries and frameworks for rapid and low-cost development. The MVIS can play a major role on improving throughput and lead time of stamping dies. Furthermore, the processed inspection images can be leveraged for future process monitoring and improvement by applying deep learning techniques.

Recently, elevator inspection and self-examination were strengthened through the revision of the Elevator Safety Management Act, but there have been no significant reduction in serious accidents and major failures. Therefore, the government intends to lay the foundation for reflecting the safety quality rating system, which adjusts the elevator inspection cycle, as a policy to induce safety management of preemptive and active management entities. This study systematically reviewed and classified the safety quality rating system for elevator inspection cycle adjustment in previous studies, collected expert opinions, and reconstructed the key items into realistic evaluation items, and evaluated and scored the relative importance of each factor through the AHP technique.

The SLA 3d printer is the first of the commercial 3D printer. The 3D printed output is printed hanging on the bed that move to the upper position. Sandblasted bed is used to prevent layer shift. If sandblasting is wrong, the 3D printed output is layer shifted. For this reason, 3D printer manufacturing companies inspect the bed surface. However, the sandblasted surface has variety of irregular shapes and craters, so it is difficult to establish a quality control standard. To solve problems, this paper presents a standardized sandblasting histogram and threshold. We present a filter that can increase the classification rate.

In this study, a study was conducted to improve the reliability of the valve by developing a valve leakage and reliability measurement system designed to secure the high quality and reliability of the butterfly valve. The system measuring the torque required for valve opening and closing operation, and was configured to operate after multiple opening and closing of the valve to check for leakage of the valve. Finally, a system that can perform efficient work in terms of productivity was developed by enabling leak inspection, torque measurement, and reliability inspection through one integrated system.

본 조사는 일본의 쌀 검사 제도와 품위 등급 규격에 대한 동향을 살펴보고 그에 따른 내용을 파악하여 국내 쌀 산업 발 전 방향에 도움이 될 수 있는 방안을 모색하고자 수행하였다. 1. 농업 경쟁력 강화 프로그램으로 2016년부터는 농산물 규격 검사의 간소화로 최근에는 곡물 검사장에 곡물 판별기를 활용하여 뉘, 맥류, 뉘 이외 곡물 등을 이종 곡립으로 통합하여 5% 이내로 개정하였다. 2. 쌀에 대한 손실 방지를 위해 정미의 포장 표시를 년·월· 일 표시에서 상·중·하순으로 개정하였다. 3. 일본은 매년 생산된 현미 품위 생산량과 등급 비율을 공개 하고 있으며, 1등급 쌀을 대상으로 식미 랭킹을 선정하고 있다.

Recently, due to the aging of workers and the weakening of the labor base in the automobile industry, research on quality inspection methods through ICT(Information and Communication Technology) convergence is being actively conducted. A lot of research has already been done on the development of an automated system for quality inspection in the manufacturing process using image processing. However, there is a limit to detecting defects occurring in the automotive sunroof sealer application process, which is the subject of this study, only by image processing using a general camera. To solve this problem, this paper proposes a system construction method that collects image information using a infrared thermal imaging camera for the sunroof sealer application process and detects possible product defects based on the SVM(Support Vector Machine) algorithm. The proposed system construction method was actually tested and applied to auto parts makers equipped with the sunroof sealer application process, and as a result, the superiority, reliability, and field applicability of the proposed method were proven.

A steering knuckle for a car is a key part of a corner module and is a functional part connected to steering, suspension, and braking devices. Steering knuckles are used for various types of forging and machining methods such as casting forging, aluminum forging, etc. to perform productivity and quality. Therefore, in this study, we study about the development of the overall design of the steering knuckle in the production and supply of the steering knuckle for the product processing method, quality, assembly inspection, etc. through the modeling and analysis of the steering knuckle.

Recently, the automobile industry need environmental standards and demands decrease of vehicle weight to reduce the environmental pollution. magnesium-Aluminum cast alloys are of commercial importance because of their various applications in the automotive industry. These alloys offer a combination of a high degree of achievable strength with excellent castability, light weight and good machinability with regard to both permanent molds and die castings forming. This paper show oxide distribution and deformation on casting condition of Mg elbow support. Moreover the microstructure of Mg elbow support is observed in the integrity assessment of porosity for nondestructive radiation x-ray.

직물의 결점은 원단손실을 가중시키기 때문에, 검단공정에서 결점부위를 제거한다. 실제공장에서 이뤄지는 검단공정은 육안판정방식과 전자동 방식 중 하나를 채택하는데, 두 방식 나름대로 장단점이 있다. 본 연구에서는 육안판정과 전자동 방식의 장점만을 모아 검출은 사람이 하지만, 결점위치 정보 제공 및 결점정보 기록을 컴퓨터가 하도록 반자동 검단기를 개발하였다. 본 연구에서 개발한 레이저 그리드는 결점의 위치를 검단자가 쉽게 파악하도록 돕는 역할을 하며, 야드미터는 자동으로 결점의 위치를 측정하는 역할을 한다. 컴퓨터는 야드미터로 측정된 직물의 길이와 사람이 검출한 결점의 위치정보를 받아들여 저장하고 직물의 결점정보를 한눈에 보여주는 역할을 한다. 실제 사용되는 직물을 대상으로 특정 패턴으로 재단했을 때의 손실률을 계산하여 개발된 시스템의 성능을 객관적으로 평가하였다.

This paper is to propose various quality and reliability sampling inspection methods to perform the competitive global outsourcing strategy while purchasing and subcontracting. The study also represents implementation strategy which can be efficiently and effectively used in the enterprise. Quality sampling inspection schemes extend reliability inspection techniques with a little change.

  Many producers put sampling inspection policy into the way of their convenience. Examples of the convenience are irregular lot size and too small sample size. Because they don"t use a standard sampling inspection policy, they can not guarantee the quali

On this research, recognizing that ship inspection is closely related in improving ship safety', the importance of active quality managements of ship inspection has been notified. This paper aims to explore effective ways to improve inspection service and develop customer-centered inspection administration, by carrying out a case study on K Company. The methods applied for this research project are as follows, 1) sector-based examination of the existence of the ISO 9001 system; 2) evaluation of the operation of the system; 3) conduction of a survey questionnaire with the participation of all staff and inspection companies to analyze customer satisfaction of their inspection service, and 4) statistical analysis of the data collected from the survey questionnaire.

Purpose - The self quality inspection which is mandatory in Republic of Korea can play an important role in promoting food safety, but the cost for self quality inspection is also a big burden especially for small businesses. In addition, excessive or duplicated inspection costs resulting from the standard gaps of various ministries and agencies ultimately effect negative social utility. Thus, this paper aims to suggest ways to improve the analysis of self quality inspection for the Ready-to-Eat Foods in terms of dried laver, in order to reduce costs caused by overinclusion. Research design, data, and methodology - The focus of interest is seaweed in Kimbab, which is to be exempted from the Vibrio parahaemolyticus test on the three grounds. First, existing literature provides little support for the necessity of performing a microbiological test. Second, laver products do not require the V.parahaemolyticus test by international standards such as the CODEX. Third, no case was found for seaweed products on the list of information on failed food items over the 2015~16 period. Results - Other types of seaweed such as exportable and seasoning seaweed are not subject to the test. Hence, exclusion of the V.pahaemolyticus test on seaweed is a valid point, bringing about large expected cost savings to many small businesses. Conclusions - Based on a complete survey of 75 food-testing agencies from March 20th to 30th, 2018, this paper finds that the proposed revision of the Kimbab test is likely to save an average of 130,000 won per business per year. Especially, in the case of the testing fee of Salmonella spp.(n,c,m,M), the cost difference by agencies was found to be up to five times. The regional gap in testing fees can be considered an unfair barrier. Accordingly, it is necessary to examine whether the testing fee is set at an appropriate level through the cost-extraction program proposed by the Ministry Food and Drug Safety. Hence, the survey results also point out that harmonization of testing fees charged by different food-testing agencies is appropriate with respect to transparency and efficiency.

On the purpose to suggest an advanced scheme in assessing the domestic wheat quality, this paper reviewed the inspection systems of wheat in major wheat producing countries as well as the quality criteria which are being used in wheat grading and classification. Most wheat producing countries are adopting both classifications of class and grade to provide an objective evaluation and an official certification to their wheat. There are two main purposes in the wheat classification. The first objectives of classification is to match the wheat with market requirements to maximize market opportunities and returns to growers. The second is to ensure that payments to glowers aye made on the basis of the quality and condition of the grain delivered. Wheat classes has been assigned based on the combination of cultivation area, seed-coat color, kernel and varietal characteristics that are distinctive. Most reputable wheat marketers also employ a similar approach, whereby varieties of a particular type are grouped together, designed by seed coat colour, grain hardness, physical dough properties, and sometimes more precise specification such as starch quality, all of which are genetically inherited characteristics. This classification in simplistic terms is the categorization of a wheat variety into a commercial type or style of wheat that is recognizable for its end use capabilities. All varieties registered in a class are required to have a similar end-use performance that the shipment be consistent in processing quality, cargo to cargo and year to year, Grain inspectors have historically determined wheat classes according to visual kernel characteristics associated with traditional wheat varieties. As well, any new wheat variety must not conflict with the visual distinguishability rule that is used to separate wheats of different classes. Some varieties may possess characteristics of two or more classes. Therefore, knowledge of distinct varietal characteristics is necessary in making class determinations. The grading system sets maximum tolerance levels for a range of characteristics that ensure functionality and freedom from deleterious factors. Tests for the grading of wheat include such factors as plumpness, soundness, cleanliness, purity of type and general condition. Plumpness is measured by test weight. Soundness is indicated by the absence or presence of musty, sour or commercially objectionable foreign odors and by the percentage of damaged kernels that ave present in the wheat. Cleanliness is measured by determining the presence of foreign material after dockage has been removed. Purity of class is measured by classification of wheats in the test sample and by limitation for admixtures of different classes of wheat. Moisture does not influence the numerical grade. However, it is determined on all shipments and reported on the official certificate. U.S. wheat is divided into eight classes based on color, kernel Hardness and varietal characteristics. The classes are Durum, Hard Red Spring, Hard Red Winter, Soft Red Winter, Hard White, soft White, Unclassed and Mixed. Among them, Hard Red Spring wheat, Durum wheat, and Soft White wheat are further divided into three subclasses, respectively. Each class or subclass is divided into five U.S. numerical grades and U.S. Sample grade. Special grades are provided to emphasize special qualities or conditions affecting the value of wheat and are added to and made a part of the grade designation. Canadian wheat is also divided into fourteen classes based on cultivation area, color, kernel hardness and varietal characteristics. The classes have 2-5 numerical grades, a feed grade and sample grades depending on class and grading tolerance. The Canadian grading system is based mainly on visual evaluation, and it works based on the kernel visual distinguishability concept. The Australian wheat is classified based on geographical and quality differentiation. The wheat grown in Australia is predominantly white grained. There are commonly up to 20 different segregations of wheat in a given season. Each variety grown is assigned a category and a growing areas. The state governments in Australia, in cooperation with the Australian Wheat Board(AWB), issue receival standards and dockage schedules annually that list grade specifications and tolerances for Australian wheat. AWB is managing "Golden Rewards" which is designed to provide pricing accuracy and market signals for Australia's grain growers. Continuous payment scales for protein content from 6 to 16% and screenings levels from 0 to 10% based on varietal classification are presented by the Golden Rewards, and the active payment scales and prices can change with market movements.movements.

This paper aims to explore effective ways to improve inspection service and develop customer-centered inspection administration, by carrying out a case study on the K Society of Ship Inspection. The methods applied for this research project are as follows, 1) sector-based examination of the existence of the ISO 9001 system; 2) evaluation or the operation or the system; 3) conduction or a survey questionnaire with the participation of all staff and inspections institutes to analyze customer satisfaction of their inspection service, and 4) statistical analysis of the data collected from the survey questionnaire.