현행 우리나라의 검사제도는 사업장의 자율관리 능력을 고려하지 않고, 설비의 노후화 및 위험도와 무관하게 획일화된 방식으로 적용하여 설비의 안전성을 확보하지 못할 뿐만 아니라 정기 및 자체 검사를 병행하여 많은 불편이 있다. 따라서 사업장의 불편을 해소하고, 설비의 안전성과 신뢰도를 높일 수 있는 위험기반검사(risk based inspection, RBI)를 국내 실정에 적합하게 도입하기 위하여 사업장, 정부 및 관련 기관에서 향후 추진해야할 방향에 대하여 분석하였다. 국내에서 위험기반검사 제도가 정착될 수 있기 위해서는 먼저 법적 근거가 마련되어야 하며, 법적 제도가 마련되면 사업장에서 RBI를 적용 시 이를 검증하고, 관리할 수 있는 인증기구의 설치가 필요하다. 또한 위험기반검사를 수행하는 사업장에 대해서는 공정안전이행수준과 같은 위험기반검사 이행수준평가를 도입하고, 차등 적용하여 사업장을 관리하는 것이 바람직하다.

The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.

Ten years have passed since the establishment of KOSHBA(Korea Small and medium enterprises Hybrid Business Association), KOSHBA is composed of over 400 regional groups; over 4,000 enterprises are participating in the association. This paper deals with a survey on the present status of the participating companies in HBA of Kangwon province including the motivation of participation, participating period, and the purpose of participation. The survey results show that they are participating in HBA for manpower interchange, information gathering, mutual utilization of management resources, and their company's growth. To become a dynamic and vital association, it is necessary to share, learn, and discuss their managerial problems based on mutual trust and respect at the regular monthly meeting.

The likelihood of failure by the corrosion of high temperature H2S/H2, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that the corrosion rate was increased as temperature and H2S concentration were increased. Also, the technical module subfactor(TMSF) was increased as an used you increased, material thickness decreased, inspection number decreased, and inspection effectiveness increased. In these conditions, the maximum value of TMSF was not varied, but the TMSF was sensitively varied at low temperature for high concentration of H2S.

The likelihood of failure for the thinning of high temperature sulfide and naphthenic acid corrosion, which affect to a risk of facilities, was analyzed through the risk based inspection using API-581 BRD. We found that the corrosion rate was increased with increasing temperature and total acid number(TAN). And maximum value of the technical module subfactor(TMSF) was not varied with operating condition, but the TMSF was sensitively changed at the range of low temperature, low flow rate, and high TAN. Also, the TMSF was increased as an used year and inspection effectiveness increased, but it was increased as thickness, inspection number, and over design decreased.

Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.

Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels

Industrial facilities are becoming more complex and various with rapidly developing technologies. A number of installations and equipments are increased to improve productivity, and they are operated under the condition of high temperature and pressure. They are continuously repaired, replaced or abolished because of the deterioration with time, but their repair and replacement are not easy for economical and environmental concerns. If possible, the deteriorating equipments should be inspected and repaired effectively considering the state of maintenance and preservation, economic efficiency, and safety. That's where RBI(Risk Based Inspection) fits in. Even if RBI technology has been known among specialists, there were no tools readily available and it was hard to practice and apply RBI in industrial inspection and safety management. In the development of the qualitative RBI, the overall algorithm adopted API-581 BRD. The qualitative RBI program was developed to search the appling process.

고속도로교량을 위한 위험도기반점검주기를 제안하였다. 고속도로 교량유지관리시스템에서 얻은 상태데이터를 분석하여 교량상태 열화 에 영향을 주는 위해성인자를 찾았다. 그러한 인자와 상태열화사이의 특정한 상관성을 찾았다. 이들을 이용하여 위해성점수를 평가하는데 이용하였다. 여러 가지 위해성 인자들을 종합하여 최종 위해성을 높음, 보통, 낮음의 세 단계로 구분하였다. 취약성은 교량의 현재상태로 평가하였다. 위험도행렬을 점검주기를 위해 제안하였다. C, D, E등급 교량의 점검주기는 현행대로 유지하였다. 그러나, 보통과 높음으로 위 해성이 평가된 A 및 B 등급교량은 점검주기를 최대 6년까지 연장하였고 최소주기는 현행과 같이 3년으로 하였다. 위험도 평가에 따라 점 검주기를 보정하므로써 평균 점검인력을 27% 절약할 수 있었다.

Risk Based Inspection(RBI) Period was proposed for highway bridges in Korea. Hazard factors affecting bridge condition deterioration were found by analyzing condition data from Highway Bridge Management System(HBMS). Certain level of correlations between those factors and condition deterioration were found. They are used to evaluate hazard score. Summarizing several hazard factors, final hazard is classified as three level;high, moderate, low. Vulnerability is assessed only by the current state of bridge. Then, risk matrix is suggested for inspection periods. Inspection periods of the bridges with grade C, D, and E are maintained the same as before. But, those of grade A and B with moderate and high hazard score are elongated to maximum 6 years while the maximum inspection period is three years at present. By adjusting inspection period according to risk assessment, it was shown that 27% of average inspection manpower can be saved.

Risk Based Inspection(RBI) Period was proposed for highway bridges in Korea. Hazard factors affecting bridge condition deterioration were found by analyzing condition data from Highway Bridge Management System(HBMS). Certain level of correlations between those factors and condition deterioration were found. They are used to evaluate hazard score. Summarizing several hazard factors, final hazard is classified as three level;high, moderate, low. Vulnerability is assessed only by the current state of bridge. Then, risk matrix is suggested for inspection periods. Inspection periods of the bridges with grade C, D, and E are maintained the same as before. But, those of grade A and B with moderate and high hazard score are elongated to maximum 6 years while the maximum inspection period is three years at present. By adjusting inspection period according to risk assessment, it was shown that 27% of average inspection manpower can be saved.

We have carried out the bridge inspections according to the laws not considering the characteristics of damages. Also the current condition based inspection cannot consider the rate of bridge deterioration. But it is reasonable to classify the inspection interval according to the risk of each bridge. This suggests the risk based inspection methodology.