가는잎향유[Elsholtzia angustifolia (Loes.) Kitag.]는 화형 이 아름답고, 정유 특유의 향기가 좋아서 분화용 및 지피용 관 상식물로 수요가 증가하고 있고, 전초에는 약효가 있다고 알 려져 있다. 본 연구는 가는잎향유의 육묘에 미치는 플러그 트 레이 셀 사이즈, 파종립수, 차광정도, 추비농도 등의 영향을 구명하기 위하여 수행되었다. 연구결과, 플러그 트레이 셀 사 이즈는 용량이 증가할수록 유묘의 초장, 엽수, 마디수, 근장, 지상부 생체중이 유의적으로 증가하였다. 파종 립수는 2립 파 종 시 가장 효율적이었고, 파종량이 증가할수록 생육이 감소 하였다. 차광정도가 높아질수록 초장은 증가하였고, 경직경, 엽수, 마디수는 55% 차광에서 가장 우수하였다. 추비 처리 시 공시비료 1000배 처리구에서 생육이 가장 양호하였다. 따라 서 가는잎향유의 육묘 시 162셀 트레이에 원예상토를 채운 다음 셀 당 2립 파종한 후 55% 차광막이 설치된 육묘상에서 공시비료 1000배로 엽면시비하는 것이 가장 효과적인 것으로 생각된다.

This study was conducted to determine the optimal spring seeding dates for alfalfa yield and feed value. The experiment was conducted annually for three years (2021~2023) at the field in the Department of Animal Resources Development, NIAS, located in Cheonan. The treatments involved six seeding dates ranging from February 24 to April 14, with 10days intervals. Alfalfa was harvested four times a year at the early flowering stage. Dry matter yield showed a tendency to decrease with delayed the seeding date. However, depending on the climatidc condisions in the seeding year, the dry matter yield on March 14 or 24 was comparable to that on February 24. Annual dry matter yield varied, influenced by the daylight conditions each year. The average feed value did not significantly differ within in the same year with delayed seeding dates (p>0.05). Therefore, the most stable period for alfalfa spring seeding in the central area of South Korea is considered to be from February 24 to April 4, with February 24 indentified as the optimal date.

This experiment was carried out to determine effects of seed rate of native grasses, called native summer forage crops (NSFC), on their growth characteristics and yields in no-tillage paddy fields in central provinces. NSFC cultivation was performed according to the agricultural guidelines of the Rural Development Administration (RDA) during 2020 to 2022. Echinochloa crusgalli ‘Jeju native’, Setaria viridis ‘Korean native type’, Digitaria sanguinalis ‘Korean native type’) were sown by various seed rate in the experimental field (3m × 4m plot) of Department of Animal Resources Development, Seonghwan–eup, Cheonan, Korea in late-May or early-June for 3 years and harvested in middle-September. Dry matter yields (DMY) in Echinochloa crusgalli and Setaria viridis increased as increasing seed rate. DMY in 40 kg ha-1 of Echinochloa crusgalli was the highest and DMY in 60 kg ha-1 of Setaria viridis was the highest. However, All treatments of Digitaria sanguinalis showed similar DMY. Yields of NSFC were the order of Echinochloa crusgalli (9,681~11,092 kg ha-1) > Digitaria sanguinalis (8,311~9,023 kg ha-1) >etaria viridis (3,145~4,749 kg ha-1). The contents of crude protein in NSFC were the order of Digitaria sanguinalis > Echinochloa crusgalli > Setaria viridis. The contents of ADF and NDF in NSFC were the order of Echinochloa crusgalli > Digitaria sanguinalis > Setaria viridis. As shown in above results, we suggest that introduction of NSFC is one of the most important skills in order to stably increase yields of forage crops for utilization of the double cropping system in no-tillage paddy fields.

Soybeans are used for various purposes as a major source of protein, carbohydrates, and fat. This study was conducted to investigate the component changes in protein, amino acid, and antioxidant substances with different sowing periods by soybean varieties, as climate warming accelerates in recent years. The content of isoflavone according to early sowing did not differ by sowing period. However, it was confirmed that the content of isoflavone was higher in functional soybean cultivars such as Cheongja-5 having blue color at seed inside, Pungsan and Sowon used soybean sprouts, and Jinyang without fishy smell. There was no significant difference in the changes in protein and amino acid content according to the sowing time by soybean cultivars. The protein and amino acid content by early sowing tended to be lower than that of timely sowing. In most varieties except for some varieties, the content of proline was the highest by early sowing, confirming the presence of stress due to early sowing.

This study was carried out to evaluate the seeding date and performance of early maturing rye cultivars for the Dry matter yield (DMY) and nutritive value during 2016 and 2017 in Yeongseo region of Gangwondo, South Korea. The experimental field was designed as a split-plot arrangement. The treatments were two planting dates on September 25 and October 02 as the main plots, and two cultivars of forage rye including Gogu and Koolgrazer as sub-plots. The cultivars were harvested on April 26 at the heading stage of both years. In this experiment, the sowing dates and cultivars of the forage rye did not effect on DMY. The DMY had no significant differences among the cultivars of forage rye and seeding date of both years. Similarly, no significant difference was observed in the DMY of Gogu and Koolgrazer in both seeding date and years. The CP, NDF, ADF, and RFV had no significant differences among the cultivars of forage rye and seeding date of both years. Considering the DMY and nutritive value of the current experiment, seeding of forage rye cultivars Gogu and Koolgrazer on September 25 and October 2 could be used as an recommended seeding date at northern area. In addition, based on the climate characteristics of the region, both cultivars had relatively similar forage yield and quality that makes them to be recommended for cultivation in the region. This study is meaningful in that DMY was first presented in Yeongseo region where there is no cultivation data for forage rye.

To investigate the domestic seed production potential of Italian ryegrass, it was sown in autumn in the southern region and harvested in the spring of the following year to investigate the productivity and quality of seeds and straw. Italian ryegrass (Lolium multiflorum Lam.) ‘GreenCall’ variety was sown in Jinju, Gyeongnam in the fall of 2020 with three seeding rates (20, 30 and 40 kg/ha). The experiment was arranged consisted of a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the heading stage. The heading stage of Italian ryegrass was April 28, and there was no difference among treatments. Plant height was significantly shorter in the 40 kg/ha seeding treatment group, and there was no significant difference in the remaining treatments. The resistance of lodging, disease, and cold did not show significant differences among treatments. Spike length and number of seeds per spike were highest at 20 kg/ha seeding amount, and there was no difference in the remaining treatments. The seed yield was the highest at 1,956 kg/ha in the 20 kg/ha seeding rate, and there was no difference in the 30 and 40 kg/ha seeding rates. The dry matter content of seeds and straws was 45.60 and 41.83% on average, and there was no significant difference among treatments. The amount of remaining straw after seed harvesting was found to be 7,689 kg/ha on average on a dry basis, and it was high in the 40 kg/ha sowing area, but there was no significant difference among treatments. According to the above results, it was found that it is most advantageous to sow at 20 kg/ha when producing Italian ryegrass seeds through autumn sowing in the southern region.

This study was conducted to examine the dry matter yield and weed control of alfalfa according to postemergence herbicides treatment during spring seeding alfalfa. The seeding time of alfalfa was April 21, 2021, the seeding amount was 20 kg/ha, and the seeding method was by 20 cm wide. The alfalfa harvest was carried out at the early bloom stage (10% of flowering), and the harvest date was June 29, 2021. The test treatments were non herbicide (NH), hand weeding (HW), herbicide 1 (Trifluralin, H1), herbicide 2 (S-metolachlor, H2), herbicide 3 (Alachlor, H3), and herbicide 4 (Pendimethalin, H4). Alfalfa plant height was significantly highest in H2 (62.1±1.4 cm) followed by H3 (61.7±1.6 cm), HW (58.5±1.0 cm), H1 (57.2±1.3 cm), H4 (56.1±1.3 cm), and NH (54.1±1.2 cm) (p<0.05). Based on HW, H2 and H3 were high and H1 and H4 were short, but NH was significantly shorter than HW and H1~H4 (p<0.05). The dry matter yield of alfalfa in NH, HW, H1, H2, H3, and H4 were 717.2±94.2, 2,613.8±254.1, 1,667.8±94.1, 2,498.3±120.2, 2,435.0±118.3, and 1,793.7±354.3 kg/ha. HW is the highest among them (p<0.05). The feed composition of alfalfa was 22~24% of the dry matter yield, and the CP content were significantly higher in NH (23.6 %) (p<0.05). The NH had higher (p<0.05) NDF and ADF, but RFV was lower (p<0.05). The weed plant height was NH 98.0±3.3cm, HW 73.3±1.7 cm, H1 91.9±1.5 cm, H2 53.3±5.8 cm, H3 81.4±3.5 cm and H4 96.6±2.2 cm, and H2 was significantly smallest in the group (p<0.05). The weed dry matter yield was NH 4,770.4±232.5 kg/ha, HW 316.3±91.9 kg/ha, H1 2,353.4±173.7 kg/ha, H2 114.5±10.2 kg/ha, H3 752.7±440.6 kg/ha and H4 2,220.6±775.6 kg/ha. The weed control value was HW 94.1%, H1 53.5%, H2 98.2%, H3 84.9%, H4 48.7%, the weed value of H2 is similar to weed control value of HW. Considering the above results, postemergence herbicide treatment controlled weeds by more than 50% compared with no treatment, and among herbicides, H2 (S-metolachlor) was found to be on a similar level to hand weeding.

Barnyard millet (Echinochloa esculenta) can be processed through soiling, hay, and silage, depending on the weather conditions during harvesting. However, research on barnyard millet is insufficient, and standards for cultivar, seeding density, and fertilizers have not been established. This study was conducted to examine the effects of seeding density and seeding methods on dry matter yields. For this, we used the early-maturing (Shirohie millet) variety of the barnyard millet. The experimental design included different seeding density (10 kg/ha, 15 kg/ha, 20 kg/ha (standard seeding density), 25 kg/ha and 30 kg/ha), and different methods of seeding (drill seeding and broadcast seeding). The seeding date was May 13, 2021, and the harvest date was July 13, 2021. Harvesting was carried out when the heading reached 40 %. Lodging occurred at 5, 9 and 7 at 20, 25 and 30 kg/ha densities in the broadcast seeding, but not in the drill seeding. With decreasing density of seeding, tillage number showed an increasing trend in both drill seeding and broadcast seeding (p>0.05). The plant heights were comparable in both drill seeding and broadcast seeding (p>0.05). The heading stage of barnyard millet was checked July 7 for drill seeding, and, on July 8 for broadcast seeding. It took 62 days, i.e., till July 13 for the heading to reach 40 % of the output. The dry matter yield of barnyard millet was significantly higher at the seeding density of 30 kg/ha, for both the methods of seeding (p<0.05). There was no difference in the chemical composition of grain, based on the seeding method and seeding density. However, as the seeding density increased, the CP, NDF, ADF, and TDN contents increased in both drill seeding and broadcast seeding. We found that, the dry matter content was the highest at the seeding density of 30 kg/ha for both the methods of seeding, but this was only 1.3 times higher than that of 10 kg/ha. Considering the seed price and labor force involved in seeding, it is advisable to have a seeding density of 15-20 kg/ha.

The optimal determination of seeding rate is critical to minimizing uncertainties about the large variations observed in forage quality and productivity when alfalfa is cultivated under different geographical areas and growing conditions. The objective of this investigation was to provide information about the proper seeding rate according to harvest timing for alfalfa cultivation in the Northern regions of Korea. Alfalfa was sown in September 2018 at a seeding rate of 20, 30 or 40 kg/ha and harvested four times in 2019: May 3, July 2, September 11, and October 13. Regardless of seeding rate, alfalfa plant height was longest at the third harvest (113 cm) and the shortest in the last annual harvest (43.8 cm). However, seeding rate had no effect on alfalfa plant height at any harvest. Forage relative feed value was increased in the first cutting but decreased in the third cuttings as seeding rate increased. However, seeding rate had slight effect on alfalfa forage quality components at the second and fourth cuttings. Total annual DM and crude protein production (in 4 harvests) was greater at higher seeding rates. Plots seeded at a rate of 40 kg/ha produced on average 1,257 and 2,620 kg/ha more forage (DM basis) than those seeded at a rate of 30 or 20 kg/ha, respectively. Forage DM production at the first, second, third, and fourth harvests accounted for 36.1, 24.0, 27.1, and 12.8 % of total annual DM production, respectively. Overall, small differences were seen when alfalfa seeding rate was different but maximum forage DM production (in four harvests) was detected when seeding rate was 40 kg/ha. These data could be useful to the alfalfa growers by allowing them to make more accurate trade-offs between seed price and the expected magnitude of forage yield gains in order to select the best seeding rate.

This experiment was conducted to compare the seed productivity of Spring sown Italian ryegrass(Lolium multiflorum Lam.) depending on the seeding rates(20kg/ha, 30kg/ha, 40kg/ha) in Gangwon region. The experiment was a randomized block design with three replications. The test plots were located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian ryegrass variety was ‘Greencall’ developed by the National Institute of Animal Science, RDA. Italian Ryegrass was sown on March 26, 2020, and the seed harvesting was on the 60th day(2 July) from heading date. The heading date was May 8 with no difference, There were no significant differences in the agronomic characteristics including plant height. 30kg/ha seed rate was the highest at 146.8 seed/spike and 40kg/ha seed rate was the lowest at 114.7 seed/spike for the number of seeds per spike. The number of spikes per unit area was the highest in 40kg/ha at 886/m2 and the lowest in 20kg/ha at 750/m2. The yield of seed and straw was the highest in 40kg/ha at 1,288kg/ha and 2,970kg/ha respectively, but there was no difference. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was evaluated.

This experiment was conducted to study on the growth characteristics and seed productivity of Italian ryegrass (Lolium multiflorum Lam., IRG) planted in the Spring in Gangwon Highland according to the seeding distance (20, 30 and 40 cm). The field was located in highland around 600 m above sea level. The experimental design was randomized block design with three replication and the tested IRG variety was ‘Greencall’ developed by National Institute of Animal Science (NIAS). IRG was sown on March 26, 2020, and harvested on July 2. The plant height was the shortest at 80.5 cm in the 40 cm seeding distance plot (P<0.05), and there was no significant difference between the 20 and 30 cm seeding distance. The number of spike per square meter (m2) was significantly higher in the 20 cm seeding distance plot than that of 40 cm (937 vs. 571). The dry matter (DM) content of seed and straw after harvesting was 49.70 and 33.36 % on average, and there was no significant difference between treatments (P>005). However, there was a significant difference in the fresh and DM yield of seeds and straw (P<0.05). DM yield of seeds was significantly higher in 20 cm distance than that of 40 cm, and the yield of straw was the same trend. On the other hand, there was no significant difference in DM yield between 20 cm and 30 cm and also in the feed value of straw after seed harvesting among seeding distance. The average CP, ADF, NDF, and TDN contents were 6.91, 36.76, 61.75 and 59.86%, respectively, and the RFV value was 91. Considering the above results, the production of Italian ryegrass seeds sown in the spring in the highlands of the Gangwon is lower than that of autumn sowing, but it is judged that it needs to be reviewed in case it is unavoidable. In the future, there should be an economic analysis and the development of technology that can increase production.

This study aimed to discuss the optimal seeding and harvesting dates with growing degree days(GDD) via meta-data of whole crop maize(WCM). The raw data (n=3,152) contains cultivation year, cultivars, location, seeding and harvesting dates collected from various reports such as thesis, science journals and research reports (1982-2012). The processing was: recording, screening and modification of errors; Then, the final dataset (n=121) consists of seeding cases (n=29), and harvesting cases (n=92) which were used to detect the optimum. In addition, the optimal periods considering tolerance range and GDD also were estimated. As a result, the optimum seeding and harvesting periods were 14th April ~ 3rd May and 15th August ~ 4th September, respectively; where, their GDDs were 23.7~99.6℃ and 1,328.7~ 1,602.1℃, respectively. These GDDs could be used as a judge standard for selecting the seeding and harvesting dates.

The objective of this study was to evaluate the dry matter yield of (DMY) of Italian ryegrass (IRG) forage crop based on two seeding date (September 25 and October 2) in 2017 and 2018, and evaluation of the potential reason of DMY reduction in IRG cultivars grown at Chuncheon, South Korea. Three cultivars of IRG including Kowinearly, Kowinmaster and Hwasan 104 were used in this experiment. The experimental field was designed as a split-split-plot arrangement. The cultivars were harvested on April 26 before the heading stage of both years. In this study, no significant effect (p>0.05) of seeding date has been found on the DMY, whereas the cultivars and year showed a significant effect on the DMY (p<0.05). Except September 25 of 2017, Hwasan 104 indicated significantly lower (p<0.05) DMY than Kowinearly and Kowinmaster in all seeding periods. Though no significant difference (p>0.05) was observed for the DMY between the two seeding dates in 2018, but the DMY was significantly lower (p<0.05) than that of 2017. Lower crude protein (CP) content of Kowinearly was observed on the seeding date of October 2 of 2017, and also in both seeding dates on 2018 (p<0.05). No significant difference (p>0.05) was observed in acid detergent fiber (ADF) between the cultivars on both seeding dates and years. Similarly, no significant difference (p>0.05) was found in neutral detergent fiber (NDF) between the cultivars in 2017. However, Kowinearly showed higher NDF content as compared to Kowinmaster and Hwasan 104 on both seeding dates and years. The seeding date has no significant difference (p>0.05). Thus, considering the extent of DMY in both years, the mean minimum temperature during winter season could be the limiting factor for the DMY of IRG cultivars. However, based on this study, the seeding dates of September 25 and October 2 have no potential effect on the DMY. Thus, on the basis of the current DMY and forge quality parameters, the cultivation Kowinmaster is recommended in Chuncheon.

본 연구는 기장 종자의 발아활력 증진과 입모 균일성을 통한 안정적인 생산을 위해 염수선(비중) 종자정선을 활용한 통한 발아율, 유모의 소질 및 포장 출현율을 알아보고자 수행하였다. 1. 염수선에 따른 기장은 비중이 높아질수록 천립중이 증가 하였으며, 표준발아에서는 정선 종자에서 3품종 모두 91% 이상 발아율을 보였으며, 비중선 1.040 g l-1에서 ‘황금’ 98.9%, ‘이백찰’ 99.4%, ‘황실찰’ 98.9%로 가장 높았다. 2. 모 소질을 조사한 결과 초장에서는 비정선 종자에 비해, 정선된 종자에서 평균 초장은 2.0, 2.2 및 1.9 cm 길었고, 엽장에서는 ‘황금’과 ‘이백찰’에서만 유의성이 있었으며, 경직경과 SPAD에서는 염수선 비중에 따른 유의성이 보이지 않았다. 3. 염수선에 정선된 종자의 평균 근장, 근중 및 경중 모두 길거나 무거웠으며, 근장에서는 1.040 g l-1에서 비정선 종자에 비해 2.9, 3.0 및 2.9 cm 길게 나타났고, 근중과 경중에서도 1.040 g l-1에서 가장 무겁게 조사되었다. 4. 포장 발아활력 검정에서는 품종에 따라 평균출아일수에서만 유의성이 있었으며, 염수선 처리에서는 출아율 및 출아율지수에서 고도의 유의성이 나타났다. 3품종 모두 비중선이 높을수록 출아율과 출아율지수가 증가하였고, 비중선 1.040 g l-1 에서 가장 높은 90.7, 85.3 및 92.8% 출아율이 나타났다. 5. 기장의 출아율 증진과 입모 균일성 향상을 통한 생산성 증대를 위해서는 염수선을 통해 비중선 1.040 g l-1에서의 종자를 선별이 유리한 것으로 사료된다.