PURPOSES : The purpose of this study was to quantitatively evaluate the variability of LiDAR performance indicators, such as intensity and Number of Point Cloud(NPC), according to various environmental factors and material characteristics. METHODS : To consider the material characteristics of road safety facilities, various materials (Reference Material(RM), reflective sheet, matte sheet, granite, plastic, and rubber) were used in a darkroom, and the performance indicators of LiDAR were repeatedly measured in terms of changes in the measurement distance, rainfall, and angle of observation. RESULTS : In the case of standard reflective materials, the intensity measurement value decreased as the measurement distance and rainfall increased. The NPC showed a tendency to decrease as the measurement distance increased, regardless of rainfall intensity. For materials with high-intensity values, it was found that rainfall intensity and color had negligible effect on the change in intensity compared with the measurement distance. However, for materials with low-intensity values, it was found that the measurement distance, rainfall intensity, and color all had a significant effect on the change in intensity. CONCLUSIONS : For materials with high-intensity values, it was found that rainfall and color had negligible effect on change in intensity compared with the measurement distance. However, for materials with low-intensity values, the measurement distance, rainfall, and color all had a significant effect on the change in intensity value.

우리나라는 연안해역을 집약적으로 활용하기 때문에 폐기물로 인한 해양사고 발생률도 높은 편이다. 항해하는 선박의 추진기 에 해양부유물, 폐로프, 폐어망 등이 감기는 사고를 부유물감김사고로 정의하고 있다. 이러한 사고를 예방하기 위해 본 연구에서는 국내 에 상용화되어 세이버 타입(Shaver type)의 로프절단장치를 유한요소법을 이용하여 구조안전성 검토와 수조시험을 통해 절단 과정 및 성능 평가를 진행하였다. 그 결과 로프절단장치를 구성하는 모든 파트는 0.5s 도달하기 전 파손되었으며, 인장강도 대비 발생한 최대응력을 기 준으로 각 파트의 안전계수는 최소 2이상으로 나타났다. 수조시험에서는 세이버타입의 절단장치의 절단 과정을 살펴보았고, 실제 해상에 서 부유중인 폐로프가 다양한 각도로 진입하는 것을 고려하여 케이스 별로 설치 각도를 설정하였다. 그 결과 모든 케이스에서 절단이 되 었으며, 절단 날이 어떠한 각도에 장착되어도 로프를 절단하는데 문제가 없을 것으로 판단된다.

PURPOSES : Abroad, road pavement materials vary depending on the speed and traffic volume of vehicles, but owing to the negative perception of block pavements, sidewalks, parking lots, and parks are primarily used in Korea. In addition, since speed restriction policies such as safety speed 5030 have been implemented recently, it is necessary to use block pavements for roadways, which are considered to have the effect of reducing speed. Therefore, it is necessary not only to actively discuss the introduction of block pavements for roadways but to continue research on the effectiveness of the performance evaluation and to change the perception of roads in Korea. METHODS : In this study, five indicators (surface damage, surface temperature, driving speed of vehicle, noise, and suspended dust) were selected for a sustainable road environment. The performance evaluation index of block pavement for roadways was decided according to the domestic and international literature, and the data were collected based on the evaluation index in the section with block pavement for roadways in Korea. RESULTS : The damage rate was calculated 0.35% according to the breakage of block and Maintenance Control Index(MCI) was ranked A~B even though the pavement was used for more than 4~5 years. The surface temperature of block pavement has a temperature reduction effect of 7 ℃ compared with ordinary asphalt pavement and a speed reduction of approximately 4 km/h on average; therefore, the traffic calming effect of block pavements can be expected. The noise of block pavement and asphalt pavement exhibited a similar level, and the noise level experienced by pedestrians did not change significantly as a result of frequency analysis. The measurement of road suspended dust around the road confirmed the possibility of reducing the concentration of road dust in the air owing to the smooth surface drainage and the results indicated the possibility. CONCLUSIONS : The results of this study are expected to contribute to the recognition and functional improvement of domestic block pavements by continuous monitoring to ensure the reliability of blocks. In addition, it is necessary to ensure the reliability of the quality and functional evaluation of paving materials through continuous on-site monitoring.

The purpose of this study is to investigate the effect of organizational safety and health management activities on safety and health performance by using the results of safety activity level evaluation of public organizations. To this end, a research model was established by using three fields as independent variables among the four areas of the safety activity level evaluation index: safety and health system, safety and health activity plan, and safety and health activity level, and the safety and health activity performance field as a dependent variable. Correlation analysis and regression analysis between major variables were performed. As a result of the correlation analysis, the safety and health activity performance had a significant positive (+) correlation with all of the safety and health system, safety and health activity plan, and safety and health activity level. The safety and health system had a significant positive (+) correlation with the safety and health activity plan and safety and health activity level, and the safety and health activity plan had a significant positive (+) correlation with the safety and health activity level. And as a result of the regression analysis, it was found that the organization’s safety and health system, safety and health activity plan, and safety and health activity level all had a significant positive (+) effect on safety and health activity performance.

The railroad facilities are intended for long-term operation as the initial acquisition costs necessary for infrastructure construction are high. Therefore, regular maintenance of railroad facilities is essential, and furthermore, system reliability through systematic performance evaluation is required. In this study, the signal control system of railroad electrical equipment was selected as the subject of research and the performance evaluation target facility selection study was conducted using AHP. The results of the study can contribute to the reliability of the signal control system as well as to the reliability of the railroad system, which is a higher system.

The performance of composite safety barriers is evaluated through computer simulation. A composite safety barrier of SB4 grade is modeled. The MAT58 material model provided by LS-DYNA software is used to model composite material. The composite safety barrier satisfies strength and deformation limit values. The barrier also satisfies THIV and PHD limit values of passenger protection performance.

It is known that human factors account for 80 percent of all railway accidents. To reduce human errors must be the most efficient shortcut to railway safety. For public transportation employees like railway, the more delicate safety management should be executed in individual level. However, there are rarely efforts to improve safety performance of workers who are the subject operating the railway system. This paper develops a hierarchy model to evaluate the human safety performance in railway industry. To evaluate the model, AHP (Analytic Hierarchy Process) methodology is adopted. The hierarchy model is composed of four levels which are objective, two criteria, specific factors of criteria, and rating scales. In addition, since employees for evaluation are over 10, the pairwise comparisons for rating scales are carried out by the absolute measurement. We explore the applicability of AHP to the performance evaluation of railway safety workers by an example and also investigate the changes of alternatives that are railway employees according to the changes of human characteristic which is one of criteria.

This paper deals with an efficient and effective method on measuring, monitoring and evaluating safety and environmental performances of a process using SPC control charts. We propose 7 safety control charts as a tool to monitor hazard dendritics, and we propose 15 environment control charts to monitor pollution emissions. We also propose useful guidelines that SPC(Statistical Process Control) control charts can be used for safely and environmental monitoring.

Generally, the navigational safety of a ship under various loading conditions is evaluated by a loading manual. However, the loading manual handles only statical factors such as weight and buoyancy of ship without including any wave conditions. Practically ship's safety is much concerned with the occurrences on the rough sea as propeller racing, rolling, deck wetness, vertical acceleration, lateral acceleration, slamming and so on. The purpose of this paper is to present a synthetic and practical evaluation method of navigational safety using the integrated seakeeping performance index(ISPI) under loading conditions of ship in seaways. The method is calculated by means of the ISPI by measuring only vertical acceleration. Judgement of dangerousness is carried out for four lading conditions : homogeneous full loaded, half loaded, heavy ballast loaded, and normal ballast loaded conditions. In developing the practical evaluation system of navigational safety, it is useful to solve the difficulties in measuring factors by sensors. And by applying the evaluation diagrames, navigators are able to avoid dangerousness by keeping away of the danger encountering angle of wave direction which the diagram shows.

The law of facilities safety is maintained for the purpose of protecting the safety of the people. Recently, the law of facilities safety is revised to introduce an evaluation system based on performance. In this research, we classified the civil complaints that occur continuously in relation to the introduction of the performance evaluation system and through this we drew the improvements to establish the system.

The recently-developed automated vessels require a system which evaluates the operating conditions of the ship at present position from weather information as well as sensors ; forecasting the operations condition in the state to come in foreseeable future ; and suggests the optimum course and speed for ship's safety. According to a study, deck wetness, propeller racing, slamming. rolling, vertical acceleration, lateral acceleration, vertical bending moment at midship etc. were chosen as the factors for evaluating seakeeping performance. As a matter of act, there is no developing the hardware of a system which could consider all the factors on seakeeping performance. This study introduces a theoretical method which makes it possible to evaluate the seakeeping performance by applying a theory from reliability engineering, and thereby establishing a safety space. The author adopts rolling and pitching as the factors on seakeeping performance by clarifying the correlation of stochastic processes the factors presently adopted for evaluation system in consideration of the safety of human being, cargoes and the ship. This method of evaluation shall be of much use in developing the practical system of seakeeping performance of a ship in waves.