This study aimed to develop an optimal greenhouse model for strawberry seedling during the summer high-temperature period based on the results of field surveys. We conducted a survey on the structure types of 46 strawberry seedling farms nationwide, including width, ridge height, eaves height, ventilation method, seedling bed width, and spacing. Based on the survey results, we derived the optimal greenhouse model by considering various factors. The greenhouse width was set at 14 meters to maximize the efficiency of seedling beds and overall space. The height was determined at 2 meters, taking into account ventilation during the summer season. To reduce stress on the supporting structure due to snow loads, we established a reinforcement installation angle of 50 degrees. We analyzed two different models that use support beams with dimensions of φ48.1×2.1t and φ59.9×3.2t, respectively, to ensure structural safety against meteorological disasters, considering regional design wind speeds and snow accumulation. We utilized these developed greenhouse model to conduct strawberry seedling experiments, resulting in a high survival rate of average 93.2%. These findings confirm the usefulness of the strawberry seedling greenhouse in improving the seedling environment and enhancing overall efficiency.

본 연구는 원통형 종이포트 토마토 육묘시 Diniconazole의 처리방법이 도장억제 및 근권발달에 미치는 영향을 검토하기 위하여 수행되었다. 그 결과, 엽면적, LAR, 초장, 충실도, 생체중, RGR 및 R/S 에서 시험구간 유의한 차이를 보였다. 동일한 농도를 처리했을 경우, 근권부와 지상부의 흡수도 차이로 인해 저면관수가 엽면살포에 비해 도장억제에 효과적이었다. 저면관수는 엽면시비의 10분의 1의 농도만으로도, 20~30%정도의 동일한 도장억제 효과를 얻을 수 있었다. 디니코나졸 처리에의한 근권부 반응이 흥미로웠는데, 저면관수시 총근장, 근권부피, 평균 근경 및 근단수가 증가하였다. 특히, 0.3mm 이하의 초미세근이 감소하고 0.3~0.6mm의 세근이 증가하였다. 따라서 원통형 종이포트 육묘시 저면관수를 하는 것이 기존 엽면시비에 비해 사용량이 적으면서도 도장억제 및 근권부 활착률을 높힐 수 있을 것으로 판단된다.

본 연구는 식물공장의 각 공정 간을 연결하는 육묘라인을 폐쇄형 레일로 설정하고, 그 레일 상에서 구름바퀴 이동을 하는 육묘베드가 있고, 이 육묘 베드위의 일정위치에 육묘트레이를 자동으로 올려놓는 자동적재장치를 개발하기 위하여 수행되었다. 이 장치의 개발을 위한 기초시험으로 바닥재 위에 육묘트레이를 올려놓고 밀기이송을 하는 시험을 실시하고, 밀기이송력의 변화를 측정 분석하여 최적의 육묘트레이 자동적재장치를 개발하였다. 바닥 위에 파종완료한 트레이를 올려놓고 밀기 이송을 할 때 최대 이송력은 이송속도 30 cm/s에서 트레이 3개를 이송할 때로 초기이송시점에서 최대 피크이송력과 초기 과도상태 이후 최대 정상상태 이송력이 각각 바닥재료가 고무판에서는 32.8 N, 29.4 N, 목재판 29.7 N, 22.5 N, 아크릴판 26.9 N, 19.6 N, 철판 27.6 N, 19.1 N으로 나타났다. 이 이송력의 변화는 모노레일 컨베이어가 트레이와 충돌 직후 최대로 발생했으며, 이후 점차 줄어들어 안정적으로 변화되는 것으로 나타났다. 트레이를 2개 이상 맞대어 밀기이송 시 트레이 외각 받침날의 겹침현상이 일어났다. 최종적으로 개발한 육묘 트레이 적재이송장치는 100회의 작동시험 결과 작동에러는 없었으며, 최대 육묘트레이 적재이송 작업속도는 2초/매, 트레이 이송위치 최대오차는 0.5 cm로 나타났다.

We investigated the effect of silicate coating of rice seeds on bakanae disease incidence and the quality of seedlings raised in seedling boxes and transplanted into pots. The silicate-coated rice seed (SCS) was prepared as follows. Naturally infested rice seeds not previously subjected to any fungicidal treatment were dressed with a mixture of 25% silicic acid at pH 11 and 300-mesh zeolite powder at a ratio of 50 g dry seed - 9 mL silicic acid - 25 g zeolite powder. The following nursery conditions were provided : Early sowing, dense seeding in a glass house with mulching overnight and no artificial heating, which were the ideal conditions for determining the effect on the seed. The nursery plants were evaluated for Gibberella. fujikuroi infection or to determine the recovery to normal growth of infected nursery plants in the Wagner pot. Seedlings emerged 2-3 days earlier for the SCS than they did for the non-SCS control, while damping-off and bakanae disease incidence were remarkably reduced. Specifically, bakanae disease incidence in the SCS was limited to only 7.8% for 80 days after sowing, as compared to 91.6% of the non-SCS control. For the 45-days-old SCS nursery seedlings, the fresh weight was increased by 11% and was two times heavier, with only mild damage compared to that observed for non-SCS. Even after transplanting, SCS treatment contributed to a lower incidence of further infections and possibly to recovery of the seedlings to normal growth as compared to that observed in symptomatic plants in the pot. The active pathogenic macro-conidia and micro-conidia were considerably lower in the soil, root, and seedling sheath base of the SCS. In particular, the underdeveloped macro-conidia with straight oblong shape without intact septum were isolated in the SCS ; this phenotype is likely to be at a comparative etiological disadvantage when compared to that of typical active macro-conidia, which are slightly sickle-shaped with 3-7 intact septa. A active intact conidia with high inoculum potential were rarely observed in the tissue of the seedlings treated only in the SCS. We propose that promising result was likely achieved via inhibition of the development of intact pathogenic conidia, in concert with the aerobic, acidic conditions induced by the physiochemical characteristics associated with the air porosity of zeolite, alkalinity of silicate and the seed husk as a carbon source. In addition, the resistance of the healthy plants to pathogenic conidia was also important factor.

Background : Scrophularia koraiensis is a herbaceous perennials belonging to the family Scrophulariaceae. This study was carried out to survey the effect of LED on root develop characteristics in Scrophularia koraiensis seedling. Methods and Results : Seeds were collected from plants growing in the Mt. Kariwang Jeongseon, Gangwon-do in September 2014, and they were sown to 128 cell plug tray filled with Peatmoss (TKS-2) soil at March, 2015. The experiment was performed with three different LED (Blue, Red, Blue + Red) at July, 2015. Morphological characteristics of root (total root length, root projet area, root surface area, root diameter and root volume) were analyzed with WinRHIZO software. Seedling root growth of scrophularia koraiensis was surveyed to be the highest at the Blue + Red LED in all measuring. Total root length was measured high in the order of Blue + Red, Red, Blue LED. Conclusion : According to the results, Scrophularia koraiensis seedling showed the highest root growth in Blue + Red LED.

In this study, we examined the impact of transplant timing of mother plants for seedling strawberry on growth and development of daughter plants and field stage. The leaf growth of treated mother plants and crown thickness were low when transplant was performed on April 10th. Based on the results collected until July 13th, the numbers of daughter plants with more than two leaves were 20.6 and 19.5 for March 10th and March 25th, and these values decreased by April 10th and April 25th showing values of 15.1 and 11.8, respectively. After seedling growth was complete, leaf area and fresh weight of the saplings were remarkably low beginning from the transplant on April 10th. Crown thickness of saplings was generally lower when transplant timing was late. After 45 days of transplant leaf length and width were noticeably lower than the transplant on April 10th and 25th. First cluster was 100% for both the March 10th and 25th transplant, followed April 10th and 25th with values of 66% and 43%. The results revealed that transplant on March 10th and 25th had a greater positive impact on the growth and development of the strawberry cultivar ‘Seolhyang’. A supplementary study will have to be conducted to determine the relationship between the harvest period of the first cluster and the yield of marketable strawberries depending on the transplanting time of mother plants.

To investigate the impact of the number of runners developed from daughter plants during seedling on sapling growth and development during phase of first cluster, we examined four treatment groups that had 3–4, 5–6, 7–8, and 9–10 runners. As of June 5th, the group with 9–10 runners showed the highest number of saplings with more than 2 leaves, followed by groups with 7–8, 5–6, and 3–4 runners. Although observation on June 25th and July 15th showed a similar tendency for sapling numbers, no significant difference was detected between groups with 7–8 and 9–10 runners. The length of runners in the treated groups was similar to that in groups with 3–4 and 5–6 runners, with lengths of 49.4 mm and 48.0 mm, respectively, but runner length was significantly shorter in the group with 7–8 runners. Both the thickness and the weight of runners were highest in the group with 3–4 runners. The growth and development of daughter plants and root weight were similar between the groups with 3–4 and 5– 6 runners, whereas both values were lower in groups with 7–8 and 9-10 runners. While stem crown thickness values were 8.7 mm and 8.5 mm in groups with 3–4 and 5–6 runners, respectively, groups with 7–8 and 9–10 runners had thinner stems of 7.1 mm and 6.2 mm, respectively. The fresh weight of saplings decreased as the number of runners increased. From the phase first cluster, leaf area and fresh weight were remarkably low in groups with 7–8 and 9–10 runners. Taken together, these results can be used to increase the production of high-quality saplings by providing a foundation for studies to investigate the impact of the number of runners developed from daughter plants on growth and development during the seedling period and the phase first cluster.

This study was carried out in order to investigate the early growth and root development characteristics of Peucedanum japonicum container seedlings. The experiment was performed by containers (128 and 200 cavities containers) and shading levels (0%, 35%, 50% and 75% shading). Germination rate of P. japonicum seeds was getting higher in the lower shading level and the highest in the full sunlight (71.9%). Plant height was the highest under 50% shading of all containers. Fresh weight and dry weight of the shoot (leaves + stem) were the highest under 50% shading of all containers, too. Meanwhile, fresh weight and dry weight of the root per plant were the highest under the full sunlight of 128 cavities container such as 0.34 g and 0.03 g, respectively. Total root length, root project area and root surface area were higher under the full sunlight of 128 cavities container such as 234.5 cm, 6.6cm2 and 20.8cm2, respectively and the next higher was under 35% shading such as 201.7 cm, 5.9cm2 and 18.4cm2, respectively. A case of root volume was the highest with 0.15cm3 under the full sunlight. As a result of the surveying the whole experiment, it is concluded that the shoot and root of P. japonicum seedling grow nicely by maintaining 35% shading.

본 연구는 졸참나무의 건전한 1-1 조림용 묘목을 생산하기 위해 초기 묘고가 다른 묘목에서 적절한 단근의 강도를 구명하기 위해 실시하였다. 이를 위해 1-0 노지묘의 크기를 구분하여 단근(5, 10, 15 cm)을 실시하였다. 1년의 생육기간이 지난 시점에서 묘고를 비롯한 지상부 생장량과 주근 및 측근의 발달 특성을 비교 분석하였다. 지상부의 생장은 초기 묘목 크기와 단근에 의해 다양한 차이가 나타났으며, 측근의 발달은 묘목 크기에 따른 영향이 큰 것으로 나타났다. 초기 묘고가 큰 묘목군에서는 15 cm로 단근된 묘목이 가장 우수한 지상부 생장량을 나타내었으며, 초기 묘고가 작은 묘목군에서는 15 cm와 10 cm로 단근된 묘목이 우수한 생장량을 나타내었다. 묘목 크기에 따른 생장은 초기 묘고가 큰 묘목이 작은 묘목보다 우수한 지상부 생장을 나타내었으며, 주근의 재생산량과 새롭게 발달된 측근의 수도 많았다. 하지만 측근의 길이 및 무게 생장은 작은 묘목이 더 많았다. 결론적으로 본 연구결과를 종합해 보면, 고품질의 묘목을 생산하기 위해서는 묘고가 큰 1-0묘를 생산하는 것이 다양한 장점을 가지며, 초기 묘고가 26 cm 이상의 큰 묘목은 15 cm로 단근하고, 초기 묘고가 24 cm 이하의 묘목은 10 cm로 단근하는 것이 가장 이상적인 단근길이라고 판단된다.

Seed germination and the establishment of young seedlings are critical phases in the plant’s life cycle. To control these processes, plants have evolved diverse hormonal signaling networks in which brassinosteroids (BRs) attenuate abscisic acid (ABA) responses; however, the underlying regulatory mechanism remains elusive. Here, we reveal that epigenetic silencing of the ABA signaling regulator ABI3 via the BR-related transcription factor BES1 is essential for the inhibitory effect of BRs on ABA signaling during early seedling development. BR-activated BES1 forms a transcriptional repressor complex with TPL via its EAR motif that recruits the histone deacetylase HDA19. This facilitates the histone H3-mediated deacetylation of ABI3 chromatin, leading to the suppression of ABI3 and its downstream target ABI5, which results in reduced ABA sensitivity. We propose that the BR-activated BES1-TPL-HDA19 repressor complex controls epigenetic silencing of ABI3 and thereby suppresses the ABA response during early seedling development.

This experiment was conducted to develope optimum seedling quality for the sesame transplanting system. To determine optimum seedling quality condition, we conducted several experiments. At the optimum pot selection experiment for the sesame transplanting, plastic pot with 105 holes showed relatively better early growth status of sesame than those of other plastic pots with 72, 128, 164 and 200 holes. And the soil combination, 'Bunong + Plant World' which is mixed 50% respectively showed higher germination rate, lower disease and lodging rate than those of other nursery soils at the determination of optimum nursery soil mixtures. We also conducted one experiment to find out seedling duration for the optimum transplanting seedling quality. According to the result, the seedling stage with about 4 or 5 regular leaves which came to 40 days after sowing showed higher number of capsule per plant and yield potential. Those results will help to develop mechanized sesame seedling transplanting system to reduce labor and increase net income for the sesame cultivation farmers.

벼 담수직파재배에서 입모수가 적정입모수(120개/m2 )보다 적은 과소구를 60개/m2 , 적정입모수보다 많은 과다구를 200개/m2 로 설정하여, 과소구의 경우 3엽기에 4 kg/10a의 질소를 추가 시비하여 분얼발생을 촉진시키고 과다구에서는 5엽기에 시용하는 분얼비 3.3 kg/10a의 질소시비를 생략하여 분얼을 억제한 결과는 아래와 같다. 1. 개체별 최고분얼수는 적정구가 9.8개인데 비하여 과소구는 15.2개, 과다구는 8.6개이었으며, 개체별 유효분얼수는 적정구가 3.7개, 과소구가 6.5개, 그리고 과다구가 2.4개로 입모가 과다할수록 개체당 분얼수가 줄어들고 유효경비율이 낮아졌다. 2. 분얼발생 양상은 입모밀도에 관계없이 주간 3절위에서 첫 번째 1차 분얼이 발생하였으며, 유효분얼은 과소구, 적정구, 과다구에서 각각 6.5개/plant, 3.7개/plant, 2.4개/plant 발생하였다. 3. 입모과소구의 벼 개체내에서 분얼의 발생 순서와 간장, 수장, 무효분얼수, 수당립수, 임실율은 부의상관관계가 있었으나, 적정 입모밀도에서는 유의한 상관이 없었다. 입모과다구에서는 분얼발생순서와 수장, 무효분얼, 완전미율이 유의한 상관관계를 나타내었다. 4. 현미외관 특성은 입모 과소구가 적정구나 과다구 보다 청미발생이 적어서 완전미율이 가장 높게 나타났으며, 과다구와 적정구의 경우에는 1차 분얼에서 청미발생이 과소구보다 15-20%정도 높게 나타났다. 5. 쌀 수량은 적정구가 494 kg/10a인데 비하여 과소구는 적정구의 99%, 과다구는 적정구의 97%의 수량이 확보되었다.

본 연구는 마가목의 발아율 제고 및 육묘방법을 구명하기 위하여 연구한 결과를 요약하면 다음과 같다. 마가목 종자는 무처리에서 22.6%정도의 저조한 발아율을 보였으나, BA 200ppm을 20분간 처리에서는 78.9%정도로 발아율이 높았다. 산사나무 종자는 최고 11.1%의 발아율을 보였으나, 화학약품과 생장조절제 처리에 의한 발아율 증가는 없었다. 출현율은 상자 육묘와 포트육묘 재배 시 93-95%로 높았으며, 49공 포트육묘 재배 시 육묘기간 50일 묘에서 근장이 길고, 건조근중이 높아 근생육이 양호하게 나타났다. 상자육묘 재배 시 육묘기간이 40일 묘에서 초장, 건조엽중이 포트육묘 보다 높았으며. 결과적으로 마가목의 실생육묘시 포트육묘로 50일 재배 후 이식하는 것이 가장 양호 하였다.

옻나무 묘목대량증식법의 하나로 조직배양 방법을 이용하여 기내 유식물체를 다량으로 증식함으로써 옻나무 증식의 효율성을 높이기 위하여 기내 무균묘를 얻고자 실시하였다. 비중 1.0으로 선종한 결과 1차선종은 평균 50.7%의 선종율을 보였고, 98% sulfuric acid에 2시간 교반 후 2차로 선종한 결과 선종율은 20.8%였다. 발근율은 외종피를 함유한 종자(5.4%) 보다는 외종피를 제거하거나(18.3%) 내종피를 제거한 종자(32.4%)가 높았다. 전처리에 따른 종자의 발아율은 생장조절물질 처리에 의한 효과가 인정되지 않았으며, 각 처리별 유의수준도 인정되지 않았으나 sulfuric acid를 처리했을 경우 발아율이 3%로써 생장조절물질 처리보다는 약간 효과적인 것으로 나타났다. 외종피를 제거하면 발아율은 약간 높게 나타났는데, 생장조절물질을 첨가함으로써 약 4%정도 향상되었다. 특히 BA 1.0mg/L와 NAA 0.05mg/L의 혼용처리와 BA 1.0mg/L 단독처리가 10% 내외의 발아율을 보였다. 옻나무 종자는 배지에 치상한 후 약 10일 만에 정상적으로 발아하였고, 치상 후 약 3주만에 본엽이 출현한 정상적인 무균묘를 획득할 수 있었으나 발아율이 10%내외에 불과하여 매우 저조하였다.