The development of advanced nuclear facilities is progressing rapidly around the world. Newly designed facilities have differences in structure and operation from existing nuclear facilities, so Safeguards by Design (SBD), which applies safeguards at the design stage, is important. To this end, designers should consider the safeguardability of nuclear facilities when designing the system. Safeguardability represents a measure of the ease of safeguards, and representative evaluation methodologies are Facility Safeguardability Analysis (FSA) and Safeguardability Check-List (SCL). Those two have limitations in the quantification of safeguardability. Accordingly, in this study, the Safeguardability Evaluation Method (SEM), which has clear evaluation criteria based on engineering formulas, was developed. Nuclear Material Accountancy (NMA), a key element of Safeguards, requires the Material Balance Area (MBA) of the target facility and performs Material Balance Evaluation (MBE) based on the quantitative evaluation of nuclear materials entering or leaving the MBA. In this study, about 10 factors related to NMA were developed, including MBA, Key Measurement Point (KMP), Uncertainty of a detector, Radiation signatures, and MUF (Material Unaccounted For). For example, one of the factors, MUF is used in MBA to determine diversion through analysis of unquantified nuclear materials and refers to the difference between Book Inventory and Physical Inventory, as well as errors occurring during the process in bulk facilities, errors in measurement, or intentional use of nuclear materials. This occurs in situations such as attempted diversion, and accurate MUF evaluation is essential for solid Safeguards implementation. MUF can be evaluated using the following formula (MUF=(PB+X-Y)-PE). The IAEA’s Safeguards achievement conditions (MUF < SQ) should be met. Considering this, MUF-related factors were developed as follows. (􀜵􀜧􀜯 = 1 − 􀯆􀯎􀮿 􀯌􀯊 ) In this way, about 10 factors were developed and described in the text. This factors is expected to serve as an important factor in evaluating the safeguardability of NMA, and in the future, safeguardability factors related to Containment & Surveillance (C&S) and Design Information Verification (DIV) will be additionally developed to conduct a comprehensive safeguardability evaluation of the target facility. This methodology can significantly enhance safeguardability during the design stage of nuclear facilities.

본 연구는 아프리카 전자상거래 법률 및 규정이 중국-아프리카 디지털 무역에 끼치는 영향을 탐색한다. 이를 위해, 구조방정식 모델링을 이용해 중국-아프리카 ICT 상품 무역액, 아프리카 전자상거래 발전 지수, 그리 고 전자상거래 법률 및 규정간의 상호 영향을 분석하였다. 결과적으로, 아프리카 전자상거래 법률 및 규정이 아프리카 전자상거래 발전과 중국- 아프리카 디지털 무역에 모두 긍정적으로 작용함을 확인하였다. 하지만 과도한 세금은 이러한 발전을 제한하는 요소로 작용하였다. 이 연구는 방법론적 혁신을 포함하며, 아프리카 전자상거래 법률 및 규정의 개선과 디지털 무역의 발전을 촉진하는 실증적 근거를 제시하였다. 다만, 데이터 와 이론적 한계로 인한 제약점이 존재하며, 향후 연구는 이를 극복하기 위한 방안을 제시하였다. 이 연구는 이론적 가치와 실질적 시사점을 제 공한다.

Human resource management has always been the most important part of any organization (corporate and government-owned). Until whenever improvement in human resource management is always the background of every problem that occurs in the organization. This study aims to examine the relationship of procedural justice and organizational commitment to OCB satisfaction and job satisfaction in the Public Works Office of Kutai Kartanegara Regency. Sampling involved the entire population, i.e. 109 informants. They are employees who have goods and services certificates. Hypothesis test carried out with the SEM-PLS model in two stages (outer model and inner model). After that, the survey data was used SMART PLS 3.0. Based on empirical findings, we find that procedural justice has a positive and significant effect on OCB, while organizational commitment does not. Procedural justice, organizational commitment, and OCB have had a positive and significant effect on job satisfaction. The novelty of the study lies in the originality value that describes the conditions in a government agency with different benchmarks (variables and indicators) from previous studies, so it is very interesting and varied.

Value creation constitutes the essential purpose of a business relationship. However, limited research examines the role of relationship value in interfirm relationships in general and in international business settings in particular. This study develops a conceptual model that positions psychic distance, relational norms, and relationship learning as antecedents of relationship value, and relationship quality and performance as its key outcomes in international channel relationships. The study uses partial least squares-structural equation modeling (PLS-SEM) and fuzzy-set qualitative comparative analysis (fsQCA) to test the model relationships. Comparing the findings of these two approaches provides an interesting basis for discussion on the importance and applicability of PLS-SEM and fsQCA. Furthermore, the results provide an important addition to the relationship value literature and an interesting discussion on the asymmetric versus symmetric relationships among the observations.

Modern football has transformed into a scientific football based on data. With this trend, various methods for tactics studies and outcome prediction have been developed on the perspective of data analysis. In this paper, we propose a structural equation model for football game. We analyze critical factors that affect to the winning of game except psychological parts and the causal relationship between latent variables and observed variables is statistically verified through the proposed structural equation model. The results show that the Passing ability and the Ball possession affect to the Attack ability, and consequently it has a positive impact on the winning of game.

Bombus terrestris was released for pollination of apple flowers at apple orchards in Uileumgol, Milyang-sity, mid spring, 2008. Numbers of out-going bees and in-coming bees were 38heads at 10 a.m. and 23heads at 4 p.m., respectively. 75% bees per total in-coming bees collected the pollens about 10 a.m. and 63% bees per total in-coming bees collected the pollens around 4 p.m.. The SEM photography(A) showed that 82.7% of a pollen load were collected on apple flowers and 17.3% of a pollen load were collected from another plants and trees flowers. The another SEM photography(B) showed that 89.1% of a pollen load were collected on apple flowers and 10.9% of a pollen load were collected from another plants and trees flowers. Therefore these results show that B. terrestris mainly pollinates on the apple flowers but the bee seems to visit flowers of other plant species from time to time.

한국과학영재학교 천지인 천문대의 천문학적 시상 패턴에 관한 연구를 수행하였다. 관측지의 시상 상황을 결정하기 위해서는 그 관측지에서 시상을 측정하여 데이터를 얻는 것이 가장 중요함에도 불구하고, 부산 지역에서 시상에 관한 체계적인 측정이 이루어지지 못하였다. 이러한 이유에서 본 천문대에서는 2008년 5월부터 SBIG사의 시상 모니터를 도입, 매일 시간별 시상을 꾸준히 측정하고 있다. 시상 측정은 CCD로 직접 천체 이미지를 촬영하여 FWHM지수를 추정하는 방식으로 이루어진다. 우리는 지난 8개월 동안 시상 모니터를 운영하면서 얻어진 한국과학영재학교 천지인 천문대에서의 시상 자료를 바탕으로 KSA SEMO에서의 시상 패턴을 'Sunset/sunrise Effect', 'Extreme Fluctuation', 'Sudden Increment', 'Daily Variation', 'Stable Condition' 등으로 분류하였다. 시상은 전반적으로 오전 1시에서 3시까지가 다른 시간대에 비하여 좋은 것으로 나타났으며, 여름의 시상이 겨울보다 좋았다.

α-cypermethrin은 합성피레스로이드계 살충제로, 진딧물류 해충에 대해 접촉 독 및 소화중독을 일으켜 살충효과를 나타내는 약제이다. 진딧물은 성충, 약 충이 어린잎이나 잎의 뒷면에 떼를 지어 흡즙하여 식물체 잎을 위축, 퇴색하 게 하고 생육저해를 일으킨다. 이러한 진딧물류의 방제를 위해 살포된 살충제 에 의한 환경오염을 최소화하고, 적은 양으로도 최대의 살충효과를 지속적으 로 나타낼 수 있는 서방형제형의 키토산 캐리어화한 나노형 α-cypermethrin을 개발하여 복숭아혹진딧물(Myzus persicae Sϋlzer) 방제 실용화가능성을 검토하 였다. 키토산 캐리어의 분자량과 키토산 함량차이에 따른(Nano M.W. 3,000과 30,000) 두 가지 제형을 가지고 처리 당일부터 처리 후 14일까지의 경과일에 따른 고추의 복숭아혹진딧물의 살충효과와 개체군 증가율비교를 통한 방제효 과를 확인하였다. 처리 후 10일차의 나노타입에 대한 비교결과, 예상과는 다 르게, 3,000제형에서 개체군증가율 0.001로 30,000(개체군증가율 0.346)제형보 다 낮게 나타나 방제효과의 지속성을 확인할 수 있었다. 그러나 무처리구에서 의 개체군증가율(0.235)보다 높게 나타나 나노 30,000제형의 경우 방제효과구 명이 어려워, 나노캐리어 살충제 처리 후 식물체 표면과 복숭아혹진딧물의 충 체표면(구기, 복부, 등판)에서의 부착정도를 확인하기 위해 주사전자현미경을 통해 관찰하였다. 그 결과, 처리 후 시간이 경과할수록 두 시료 모두 나노캐 리어화된 α-cypermethrin의 입자의 부착밀도가 낮은 것을 확인할 수 있어 서방 형제형의 형태가 안정되지 않음을 알 수 있었다

National technical qualification does not recognised degree of working-career in labor market and an industrial field situation. National qualification is supply to nurture expert manpower and accomplish of self-development and a duty accomplishment ability improvement at a side of personal. So, This study is purposed to find that a method for recognition of working-career on the national technical qualification system. According to, this study is designed to questionnaire with BSC(Balaced ScoreCard), SEM(Structure Equation Model) with the delphi method, and is analysed using the AMOS 7.0 program package. Finally, This study is suggested growing to qualification standard for an examination a degree of master craftsman only under the change of national qualification systematization as a standard to operation and control.

National technical qualification does not recognised degree of working-career in labor market and an industrial field situation. National qualification is supply to nurture expert manpower and accomplish of self-development and a duty accomplishment ability improvement at a side of personal. So, This study is purposed to find that a method for recognition of working-career on the national technical qualification system According to, this study is designed to questionnaire with BSC(Balaced ScoreCard), SEM(Structure Equation Model) with the delphi method, and is analysed using the AMOS 7.0 program package. Finally, This study is suggested growing to qualification standard for an examination a degree of master craftsman only under the change of national qualification systematization as a standard to operation and control.

Hemicycliophora minora Wu, 1966와 Pratylenchoides ivanovae Ryss, 1980를 국내 미기록종으로 보고한다. 현재 국내에는 Hemicycliophora속에서 총 5종, Pratylenchoides속에서 총 3종의 선충이 보고되었으며, 이들 종에 대한 검색표를 첨부하였다. 아울러 주사전자현미경을 이용하여 Pratylenchoides utahensis Baldwin, Luc & Bell 와 Rotylenchus feroxcis Eroshenko의 형태적 특징을 추가적으로 기록하였다.

In this study, the composition and morphology of deposited dust particles with size ranging from a few to tens ㎛ were investigated using SEM/EDX (scanning electron microscopy with energy dispersive x-ray spectrometer). Then deposited dust particles were classified into 8 groups: quartz, aluminosilicates, ca-rich, Fe/Ti oxide, carbon-rich, industrial particle, Fe-rich, and biogenic particle. The sources of deposited dust were high in the order of aluminosilicates 41% > biogenic 18% > Fe-rich 11% > quartz and C-rich 8% > industrial 7% > Fe/Ti oxide 5% > Ca-rich 1%. In particular, the ratio of biogenic particles was relatively high due to influence of pollen. The ratio of carbon-rich was 11% at YM site, 10% at MD site, and 4% at MO site, and the site close to the large emission source was high.

생물체의 활동 특히 미생물의 활동은 직·간접적으로 전 지구적으로 분포하는 퇴적물 및 암석 내부 광물의 형성 및 변형에 영향을 주고, 일부는 특징적인 생물기원구조를 형성한다. 특히, 특징적인 생물기원구조에 분포하는 광물은 기존에 알려진 무기적 과정을 통하여 형성되기 어려운 환경에서 형성되기도 하고, 무기적 과정을 통하여 형성된 광물과는 다른 물성 및 특성을 나타낸다. 이러한 생물체의 영향을 받아 형성된 생물기원구조에 대해 연구·분석하는 것은 새로운 광물 형성 메커니즘을 규명하는데 필수적이라 할 수 있다. 따라서 본 논문은 심해저 망간각 및 해저열수분출공 지역 미생물 매트 시료를 예로 들어, 주사전자현미경 분석을 통한 자연환경에 분포하는 생물기원구조 관찰에 대해 소개하고 분석방법, 장점 및 활용에 대해 설명하고자 한다.

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

Coal-fired power plants emit various Particulate Matter(PM) at coal storage pile and ash landfill as well as the stack, and affect the surrounding environment. Field Emission Scanning Electron Microscopy and Energy Dispersive X-ray analyzer(FE-SEM/EDX) were used to develop identification factor and the physico-chemical analysis of PM emitted from a power plant. In this study, three samples of pulverized coal, bottom ash, and fly ash were analyzed. The pulverized coal was spherical particles in shape and the chemical composition of C-O-Si-Al and C/Si and C/Al ratios were 200~300 on average. The bottom ash was spherical or non-spherical particles in shape, chemical composition was O-C-Si-Al-Fe-Ca and C/Si and C/Al ratios were 4.3±4.6 and 8.8±10.0. The fly ash was spherical particles in shape, chemical composition was O-Si-Ai-C-Fe-Ca and C/Si and C/Al ratios were 0.5±0.2 and 0.8±0.5.