Ball stud parts are manufactured by a cold forging process, and fastening with other parts is secured through a head part cutting process. In order to improve process quality, stabilization of the forging quality of the head is given priority. To this end, in this study, a predictive model was developed for the purpose of improving forging quality. The prediction accuracy of the model based on 450 data sets acquired from the manufacturing site was low. As a result of gradually multiplying the data set based on FE simulation, it was expected that it would be possible to develop a predictive model with an accuracy of about 95%. It is essential to build automated labeling of forging load and dimensional data at manufacturing sites, and to apply a refinement algorithm for filtering data sets. Finally, in order to optimize the ball stud manufacturing process, it is necessary to develop a quality prediction model linked to the forging and cutting processes.

Most of automobile steering parts are manufactured through the multi-stage cold forging process using round-bar drawn materials. The same process is applied to the ball stud parts of the outer ball joint, and various research activities are being carried out to reduce the extreme manufacturing cost in order to survive in the limitless competition. In this paper, we present a quantitative prediction method for the limiting life of the die as a method for cost reduction in the multi-stage cold forging process. The load on the die was minimized by distributing the forming load based on process optimization through finite element analysis. In addition, based on the quantitative prediction algorithm of the limiting life of the die, the application of the split die and the optimization of the phosphate treatment of the material surface are presented as a conclusion as a method to improve the limiting life of the die.

Heat treatment of metals is an necessary process for obtaining properties required for metals. However, the heat treatment sector is labor intensive enough to be classified as an unwanted sector. In particular, in the case of quenching during the heat treatment, in order to select the defective product due to the collision caused by the collision between the products when the product is dropped in the oil tank during the quenching process, the labor is not concentrated on the heat treatment as the main process, It is a fact that it is put in. In this paper, in order to solve the labor - intensive nature, this paper designed and tested prototype products for the selection of defective products during the heat treatment process of the ball stud. The ball stud inspection device is divided into two parts, a ball stud supply device and an inspection device, and describes the concept design and prototype production contents. The performance of the prototype was evaluated by examining 1000 samples with 5 items. The manufactured ball stud inspection system will contribute to the relaxation of the avoidance phenomenon of the heat treatment industry and contribute to the efficiency and competitiveness of the work.

본 논문에서는 국부좌굴 현상을 고려하여 강판 콘크리트 패널(SCP)의 유한요소 해석을 수행하고 설계지침과 비교하여 전 단 스터드의 효율적인 스터드 배치 간격을 연구하였다. 강판 콘크리트 구조의 설계 및 기술기준은 전단 균열의 전개와 국부 좌굴 현상을 방지하기 위하여 스터드의 최대 간격을 제한하고 있으나 이는 기존 강재-콘크리트 합성 구조의 설계기준을 토대로 산정되었다. 이에 유한요소 해석 프로그램을 이용한 강판 및 SCP의 국부좌굴 부재 해석을 통하여 스터드 최대 배치 간격을 구하고 설계지침에서 제시한 값과 비교하였다. 먼저, 단일 강판에 대하여 국부좌굴 해석을 수행하여 판좌굴 이론과 비교 검증하였고, 연속적인 스터드 배치에 따른 영향을 확인하기 위하여 다수의 강판이 연결된 경우에 대하여 해석을 수행하였다. 또한 강판 콘크리트 구조에서 콘크리트의 영향 및 합성 거동에 따른 영향을 확인하기 위하여 강판 콘크리트 구조를 모델링하고, 국부좌굴이 발생하지 않는 스터드 배치 최대 간격을 구하여 설계지침과 비교하였다.

The concrete wall panels are composed of various members such as studs, brackets, bolts and nuts, etc. Embedded studs in the concrete wall resist transferred lateral and horizontal load in the structure. The thickness of the concrete wall influences shear behavior of embedded studs. The finite element analysis was carried out with respect to the thickness of the concrete wall to investigate shear behavior of embedded studs. The numerical analysis results were compared with the experimental results and confirmed that The deformation of the stud anchor is reduced with an increase of the thickness of the concrete wall.

The aim of this study is to examine current status of swine AI and boar stud in South Korea using survey and data analysis. This survey included 48 boar studs registered as ‘semen processing business’. The survey data were collected by direct visitation, FAX and/or telephone conversation for 7 months from June through December in 2013. 48 boar studs owned a total of 3,537 boars and the Duroc breed accounted for the highest rate (75.3%) of all boar breeds. In case of ownership, agricultural management corporations was the highest (50.0%) and followed by individual ownership (33.3%). Large-scale boar studs in terms of own over 151 boar were surveyed as 4.2% and most boar studs owned less than 100 boars (77.1%). The amount of liquid semen provided by 48 boar studs were 1,889,000 doses and each boar stud provided average of 39,000 does, which is represented for 90% consumption by sows in South Korea.

Tabinidae(horseflies), which are known worldwide as important mechanical vectors of virus, bacteria, protozoans, and helminths, cause disease in humans and animals. To the best of our knowledge, reports of horseflies associated with horse farms in Korea are rare, and knowledge of the horsefly fauna in Jeju is poor. The objective of this study was to evaluate the incidence of horseflies at a horse farm. Flies were collected using traps baited with natural attractants at a large horse farm during summer (Aug.-Sep. 2011). A total of 28,339 flies from 21 traps were collected on the large horse farm in Jeju. The most abundant were non-sucking flies (25,524; 90.07%) followed by sucking flies (2,226; 7.86%) and Tabanidae (589; 2.07%). Result of species analysis of 4 Tabanidae, ranked in descending order, are as follows: T. grisenus (45.2%), T. rufidens (25.3%), T. takasagoensis (21.6%), and Hybomitra bimaculata (7.9%). Although studies on vector ecology are essential to understanding, predicting, and controlling insect-borne diseases, relatively few studies on tabanids in Jeju have been reported. This paper presents the first comprehensive collection of data on the horse fly fauna of this part of the horse concentrated region. Further research is needed to investigate pathogens on the horse of horseflies.

Microstructural evolution and the intermetallic compound (IMC) growth kinetics in an Au stud bump were studied via isothermal aging at 120, 150, and 180˚C for 300hrs. The AlAu4 phase was observed in an Al pad/Au stud interface, and its thickness was kept constant during the aging treatment. AuSn, AuSn2, and AuSn4 phases formed at interface between the Au stud and Sn. AuSn2, AuSn2/AuSn4, and AuSn phases dominantly grew as the aging time increased at 120˚C, 150˚C, and 180˚C, respectively, while (Au,Cu)6Sn5/Cu3Sn phases formed at Sn/Cu interface with a negligible growth rate. Kirkendall voids formed at AlAu4/Au, Au/Au-Sn IMC, and Cu3Sn/Cu interfaces and propagated continuously as the time increased. The apparent activation energy for the overall growth of the Au-Sn IMC was estimated to be 1.04 eV.

최근 바람 및 지진에 대한 진동제어를 목적으로 한 저항복점강재를 이용한 댐퍼가 많이 사용되고 있다. 그러나 전체 구조물의 진동에 영향을 미치는 저항복점강재의 동적특성 및 지진에너지 소산효과는 명확히 밝혀지지 않고 있다. 본 연구에서는 저항복점감재에 대한 반복재하실험 결과 및 저항복점감재를 정착한 3층 규모의 구조물에 대하여 실시한 강제진동시험의 결과에 대해 보고한다. 또한 저항복점강재의 지진에너지 소산양의 정량적인 평가를 위하여 수학적 이력형모델 및 등가선형해석법을 이용하여 평가한 결과에 대해 보고한다.

본 연구에서는 비내진상세를 가지는 중⦁저층 R/C 건물의 1층 골조를 제작하여 무보강 실험체에 대한 구조실험을 실시하였다. 실험결과 실험체는 부재각 1.33%에서 전단파괴를 나타내어, 비내진상세를 가지는 R/C 건물의 내진성능에 관한 중요한 자료를 획득하였다. 본 연구에서는 간주형 좌굴방지 강재 슬릿댐퍼 시스템을 개발하였으며 내진보강효과를 검증하기 위하여 구조실험에 선행하여 상기 국내 비내진상세 RC 골조 실험결과를 기반으로 비선형해석을 실시하였다.

The concentrations of total polyohenolic compound from extract of Paulownia tomentosa Stued. were water-soluble extract 7.98%, methanol extract 12.30% and ethanol extract 11.63%. The free radical scavenger activities of three extracts at the levels of 0.5% were higher than that of BHT(butylated hydroxytoluene). In antioxidative activities measured the concentrations of TBARS(thiobabituric acid reactive substances) in tissues microsome induced with Fe++/ascorbate, the water-soluble extract was errdctively suppressed in liver and spleen. In antioxidative activities determined by thiocyanate method against lipid peroxidation using linoleic acid, the methanol extract showed the higher compared with other extracts, but BHT showed the highest antioxidative activity. These results suggest that fruit extracts of Paulownia tomentosa Stued. showed to have relatively high concentrations of polyphenolic compounds and antioxidative activities.

All over the world, one finds different types of dues, charges and fees imposed for the use of port facilities. The positiion is further confused by the fact that different names are often used for the same charge in different ports and again the same name can be used for different types of charge. For instance, in some places "tonnage" dues can be dues on cargo tonnage and in others are dues on shipping tonnage. Charges made by port authorities can be of two kinds; charges on ships and charges on goods. One of the abiding complaints of all port tariffs is that they are too complicated. The plea is for simplicity and comprehension. The purpose of this study is to elucidate and to criticize principles for guiding port pricing policy.ng policy.