일반적으로 콘크리트댐은 비파괴 검사를 실시한 물성값을 이용하여 정적 및 동적 안전성 평가를 실시한다. 그러나 이런 값을 이용하여 수치해석을 할 경우 경험적인 물성값을 적용하기 때문에 안전성 평가에 대한 결과는 현실적 요소를 반영하기 어렵다. 또한 댐은 품질관리가 중요한 요소 중 하나이지만, 과거 건설된 몇몇 댐에 대해서 축조시기, 타설시기가 달라 재료적 특성에 따른 안전성 문제가 대두되어 관심이 되었다. 따라서, 본 연구에서는 오랜기간 동안 건설중단 된 후 완공된 콘크리트댐의 내부상태를 조사하고(BIPS), 시추코아에 대한 물리특성 실험을 실시하여 물성값 차이로 인해 발생되는 동적특성 결과를 비교분석하였다.

국내 콘크리트댐의 경우 내진설계는 관성력을 고려한 진도법을 적용하여 설계를 하고 있으나, 보수적인 설계 방법으로 동적특성을 반영하지 못하는 단점이 있어, 동적특성을 고려한 댐 내진설계가 필요하다. 또한 콘크리트댐 내진성능평가는 동적해석으로 평가해야 하지만, 국내의 경우 대부분 진도법으로 평가를 하고 있어 현행 기준을 적용하기에는 어려운 점이 있다. 이에 본 연구에서는 진도법, 수정진도법, 동적해석 방법을 수행하여 내진설계 및 내진성능평가 결과에 대해서 비교 분석하였다.

본 연구에서는 콘크리트 중력식 댐의 임계균열길이가 계산되었으며 또한 복합균열의 균열선단에서 유효응력 확대계수의 변화량이 조사되었다. 작용하중으로는 댐 상부면에 작용하는 정수압과 댐의 균열면에 작용하는 수압 및 자중으로 구성된 정하중, 그리고 댐 주위에서 발파작업이 수행되는 경우에 고려될 수 있는 발파진동 및 동수압으로 구성된 동하중이 사용되었다. 균열이 발생한 위치와 방향 및 발파진동의 크기에 따라 임계균열길이가 계산되었으며, 또한 복합균열의 형태 및 균열선단 간의 이격거리에 따른 유효응력확대계수의 변화량이 검토되었다.

콘크리트 중력댐 상부면의 균열에 작용하는 수압의 영향을 주로 고려하여 댐의 파괴거동을 조사하였다. 첫째, 표면적분법에 의하여 응력확대계수를 구하는 경우에 작용하는 수압의 형태를 등분포형태 외에, 삼각형 분포 및 포물선분포도 고려하여 보았다. 둘째, FRANC(FRacture Analysis Code)를 이용하여 균열면에 작용하는 수압의 형태에 따른 기존균열의 전파방향을 추적하였다. 셋째, 월류수위 아래에서 균열이 전파되지 않을 수 있는 한계균열길이를 수압의 분포형태에 따라 구분하여 구하여 보았다. 표면적분법으로 수압의 형태에 따라 응력확대계수를 구한 결과는 FRANC를 이용하여 얻어진 결과와 비교 되었으며 비교적 잘 일치함을 알 수 있었다. 균열면에 작용하는 수압의 형태가 삼각형분포의 경우에 균열의 전파방향은 등분포의 경우에 비하여 댐의 기초쪽으로 기우는 것을 알 수 있었으며, 또한 월류수위 아래에서 한계균열길이는 댐높이의 대략 2/5-1/2되는 곳에서 최대가 됨을 알 수 있었다.

Failure risk investigation of any structure in a seismic zone can be done by the seismic probabilistic risk assessment (SPRA), which became a very attractive area of research in terms of safety measurement. This paper introduces such kind of concept to identify which magnitude in a specific seismic zone will contribute more vulnerable failure point in a structure. Here, for implement this idea a case study on a concrete gravity dam has been carried out. In order to make a correlation between the magnitude and failure risk contribution based on different damage stage, a combination of seismic hazard analysis and the probability of structural collapse is adopted. Therefore, the deaggregation of the mean annual frequency of failure risk by magnitude is used in this study to quantify four different limit stages of failure identification criteria. Consequently, from analyzing the result, in case of concrete gravity dam, this deaggregation approach shows the tensile crack in the base looks more vulnerable damage stage for the specific seismic zone.

In this study, perfectly matched discrete layers with analytical wavelengths is applied to concrete gravity dam analyses. The validation of the proposed procedure is made by comparing the results with a previous study and the results obtained from SASSI,

All over the world, concrete gravity dams have to withstand lots of environmental hazards and time-varying external loading during an earthquake. Therefore, the risk assessment of this structure with time may become an important study for the dam structure, which is related to the chemo-mechanical effect on the aging concrete. The focusing point of this study is to propose an earthquake assessment procedure to determine the failure probability with time of any concrete gravity dam for the future if we consider the material deterioration. This material decay is mainly associated with the modulus of elasticity of the concrete and it is explained briefly in the manuscript.

In this study, non-destructive methods were applied to detect cavities behind face-slab of concrete-faced rockfill dam (CFRD). This study reviewed the effectiveness of the field IE, MASW, MIRA shear wave tomography and GPR findings. IR techniques also reviewed as an additional method of exploration to reinforce the proposed methods of exploration. Among previous methods, IE exploration was concluded most appropriate as an efficient way to detect cavity of the CFRD. Nevertheless, additional reinforcement investigation is required because the result of a single exploration is difficult to reduce the uncertainty.

This study sought to find a new diagnostic method. The drain hole temperature and the upstream water temperature change were measured for 1 year. The purpose of this study was to analyze the correlation between the temperature of the drain hole and the upstream temperature.

In this study, in order to survey the concrete dam leakage use the Thermal Line Sensor (TLS) temperature monitoring instruments. The temperature monitoring locations are two drain hole of concrete dam and the upsteam water temperature of dam.

Various methods were investigated to confirm the clogging of the drain hole of the concrete dam and recover it. The effects of drainage holes were investigated through re-drilling at the two locations.

There has been a growing interest in the seismic performance of existing structures. Have been enacted most of the evaluation criteria, there is a need for specific seismic performance evaluation methods and standardization of the dam. In the present study, we carried out the seismic performance evaluation of two of the concrete dam with different shape, for explaining the relationship of the dam of the shape and seismic safety.

이 논문은 표면 차수벽형 석괴댐(Concrete-Faced Rock-Filled Dam) 콘크리트의 내구성능 개선에 관한 것이다. 댐은 영구 구조물이 며 그 중요성을 감안할 때 충분한 내구성능이 확보되어야 한다. 이 논문에서는 플라이애시와 PVA 섬유를 혼입함으로써 차수벽 콘크리트의 내 구성능을 개선하고자 하였으며, 플라이애시와 PVA 섬유 혼입율에 따른 내구성능 향상 검증을 위하여 기본물성 (강도, 소성수축, 자기수축)을 포함한 내구성능 검증 실험(염소이온 침투, 마모 저항성, 동결융해 저항성)을 수행하였다. 실험 결과, 플라이애시 15%와 PVA 섬유 0.1%를 혼 입하였을 때 내구성능 개선 효과가 뛰어난 것으로 나타났다. 검증된 차수벽 콘크리트의 현장 적용을 통해 표면 차수벽형 석괴댐의 안전성 및 내 구성 개선에 기여할 수 있을 것으로 판단된다.

In this study, in order to enhance the quality of concrete dam it is mentioned that the influenced factors which effect on the water leak and methodology for weak zone repair and retrofit before filling water of concrete dam.

In this study, in order to enhance the quality of concrete dam it is mentioned that the influenced factors which effect on the water leak and methodology for weak zone survey before filling water of concrete dam.

Since then the Special Act on the Safety Control of Public Structures has been enforced, the precision safety Inspection result was being collected. but it was not performed to comprehensive analysis and D/B. In this study, statistical analysis was performed by utilizing the Precise Inspection for Safety of Dam.

In this study, dynamic centrifuge tests on the dam interface model, which was prepared for an existing composite dam, were carried out. From the analysis of the accelerations measured at the dam base and at the crest of the concrete, the joint, and the rockfill model around the interface, the acceleration amplification characteristics of the interface was examined.

The purpose of this paper is to improve the method for rear cavity inspection of cut-off wall at concrete faced rock-fill dam. To do this, we suggested that using impact echo wave, analysis of embeded instruments data, and numerical method to considering the expecting crack open failure behavior. We hope that improved methods were assist maintenance of concrete cut-off wall at concrete faced rock-fill dam.

This study seeks to characterize the dynamic behaviour of each section and to understand the performance of the interface using centrifuge model test and numerical analyses. The model test was verified by the comparison of the test results with those of numerical analyses, and the natural frequency for the composite dam with concrete-rockfill was proposed as like the same centrifuge model test and numerical analyses.

The key findings of the paper are as follows: Numerical parameters study of the interface-element was carried out, the friction angle depends on rockfill zone material and normal and shear stiffness coefficient of the two materials (concrete and rockfill), the average values were found to be the most appropriate.