The object of this study is to feasibility assesment for co-digestion efficiency of food waste recycling wastewater(FWR) with thermal hydrolysis process dehydration cake (THP Sludge). As a result of THP pre-treatment experimental conditions to 160oC and 30 minutes, the solubility rate(conversion rate of TCOD to SCOD) of the THP sludge increased by 34%. And the bio-methane potential in the THP sludge increased by about 1.42 times from 0.230 to 0.328 m3 CH4/kg VS compared to the non-pre-treatment. The substrates of the co-digestion reactor were FWR and THP sludge at a 1:1 ratio. Whereas, only FWR was used as a substrate in the digestion reactor as a control group. The experimental conditions are 28.5 days of hydraulic retention time(HRT) and 3.5 kg VS/m3-day of organic loading rate(OLR). During the 120 days operation period, the co-digestion reactor was able to operate stably in terms of water quality and methane production, but the FWR digestion reactor deteriorated after 90 days, and methane production decreased to 0.233 m3 CH4/kg VS, which is 67% of normal condition. After 120 days of the experiment, organic loading rate(OLR) of co-digestion reactor was gradually increased to 4.5 kg VS/m3-day and operated for 80 days. Methane production during 80 days was evaluated to be good at the level of 0.349 m3 CH4/kg VS. As a result of evaluating the dehydration efficiency of the sludge before/after 150-180oC THP using a filter press, it was confirmed that the moisture content of the sludge treated before THP at 180oC was 75% and improved by 8% from 83-85% level. Therefore, it is expected that the co-digestion reactor of FWR and THP sludge will ensure stable treatment water quality and increase bio-methane production and reduction effect of dehydration sludge volume.

나노여과막(NF)은 식품가공, 제약 등 폐수는 물론 지자체 하수처리시설에서 배출되는 폐수 처리에 있어 훨씬 낮 은 압력으로 운용이 가능해 역삼투막(RO)보다 인기가 높다. NF막의 경우 분리 메커니즘은 투과확산 기작과 더불어 RO 박막 보다 낮은 가교밀도로 인한 체거름 메커니즘이다. 막 오염은 세라믹 막과 달리 고분자 막의 경우 나노 여과 공정의 고질적인 문제 중 하나이다. 이러한 문제를 해결하기 위해 차아염소산나트륨을 사용한 멤브레인 세척이 이루어진다. 폴리머 멤브레인 에 비해 세라믹 멤브레인은 이러한 화합물에 매우 안정적이다. 본 리뷰에서는 NF 프로세스에 의한 폐수 처리의 다양한 유형 의 세라믹 막 적용에 대해 논의한다.

석유 정제 시설 등에서 발생하는 함유폐수의 처리는 폐수의 유류 허용한계를 넘기지 않기 위해 중요한 공정이다. 세라믹 멤브레인은 유류 처리에서의 높은 효율, 내화학성, 내열성, 기계적 안정성, 그리고 단순한 작동 원리 등의 장점을 가지 고 있어 함유폐수의 처리에 효과적이다. 그러나 세라믹 멤브레인은 원재료의 높은 가격 때문에 널리 사용되는 데에 한계가 있다. 최근에는 이를 해소하기 위해 플라이 애시나 점토를 사용하는 노력도 있었다. 이 리뷰는 세라믹 멤브레인의 효율과 제 작을 실리콘, 알루미나, 그리고 폐석탄회의 재료로 나누었다.

Strong acidic wastewater containing a radionuclide is generated from the decontamination of radioactively contaminated wastes or equipment. This wastewater is generally treated though a precipitation process using an alkali (alkali earth) hydroxides. In this precipitation process, a significant amount of alkali (alkali earth) sulfates are generated, which is the reason for the increase in the radioactive waste generation. In this study, a method for separating only radionuclides and metal ions from the wastewater was evaluated. For this reason, precipitation behaviors of radionuclides and metal ions by hydrazine injections were investigated using equilibrium calculations. In addition, behaviors of hydrazine decomposition after removal of radionuclides and metal ions were analyzed for recycling the wastewater.

Excess nitrogen (N) flowing from livestock manure to water systems poses a serious threat to the natural environment. Thus, livestock wastewater management has recently drawn attention to this related field. This study first attempted to obtain the optimal conditions for the further volatilization of NH3 gas generated from pig wastewater by adjusting the amount of injected magnesia (MgO). At 0.8 wt.% of MgO (by pig wastewater weight), the volatility rate of NH3 increased to 75.5% after a day of aeration compared to untreated samples (pig wastewater itself). This phenomenon was attributed to increases in the pH of pig wastewater as MgO dissolved in it, increasing the volatilization efficiency of NH3. The initial pH of pig wastewater was 8.4, and the pH was 9.2 when MgO was added up to 0.8 wt.%. Second, the residual ammonia nitrogen (NH4 +-N) in pig wastewater was removed by precipitation in the form of struvite (NH4MgPO4·6H2O) by adjusting the pH after adding MgO and H3PO4. Struvite produced in the pig wastewater was identified by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) analysis. White precipitates began to form at pH 6, and the higher the pH, the lower the concentration of NH4 +-N in pig wastewater. Of the total 86.1% of NH4 +-N removed, 62.4% was achieved at pH 6, which was the highest removal rate. Furthermore, how struvite changes with pH was investigated. Under conditions of pH 11 or higher, the synthesized struvite was completely decomposed. The yield of struvite in the precipitate was determined to be between 68% and 84% through a variety of analyses.

본 연구에서는 하수 재이용을 위한 역삼투막 공정에서 전처리 정밀여과막(MF) 손상에 대한 누출되는 다양한 수 질변화로써 막 손상 검지 방안을 제시하였다. 이를 위하여 역삼투막 유입수질 적합성 평가지표인 SDI (silt density index)를 3에서 5의 범위 내에서 막 손상 시 검지 감도를 정량화하기 위하여 전처리 분리막이 1에서 3가닥 파단에 따라 SDI는 1.92에 서 6.11까지 증가한 결과를 확인할 수 있었다. 일반적으로 3을 기준으로 역삼투막 유입수질로 설정하였을 때 분리막이 3가닥 까지 파단이 되어야만 막 손상 검지가 가능하다는 것을 의미하며 역삼투막의 오염은 잠재적으로 가속화되어 효율을 저하시 킬 수 있다. 또한 이때 누출되는 입자성과 유기물질에 대하여 0.45 μm 이상의 크기만 걸러주는 입자계수는 입도분포별 막 파 단 개수에 따라 일정한 패턴을 확인할 수 없었으며, TOC 농도는 약 2배의 변화패턴으로써 SDI와의 상관관계로써 TOC가 막 손상 수질지표로써 신뢰성이 높은 것으로 확인되었다. 수질분석결과와 더불어 USEPA에서 제시하는 막 손상 검지 방법 중 압력손실시험과 이를 기반으로 LRVDIT 모델의 적합성 평가를 한 결과 막 손상 또는 역삼투막 공정으로 유입되는 막오염물질 을 신속하게 확인할 수 있는 SDI 및 TOC를 포함한 LRVDIT 모니터링과 UCL 설정을 병행해야 한다.

폐수는 석유 정제 산업에서만 방출되는 것이 아니고 아니라 가죽, 섬유, 페인트, 목재, 염료 가공 산업에서 또한 방출된다. 이런 산업 폐수는 중금속과 질소화합물 등 수질오염물질을 포함하고 있으며 화학적 산소요구량(COD)이 높다. 안 전한 처리를 위해 폐수에서 각종 오염물질을 걸러내는 방식이 있지만 막 기반 기술은 고효율, 저비용으로 가장 효율적인 방 법 중 하나이다. 다양한 막 중에서, 제올라이트 막은 가성비로 주목을 받고 있으며 많은 연구를 거쳤다. 본 리뷰논문은 i) 폐 수처리, ii) 미세여과막, iii) 중공사막, iv) 초여과막의 순서로 폐수처리를 위한 제올라이트 막의 최근 진척을 중점으로 다루고 있다.

막여과는 흡착, 응집 등의 폐수 처리 방법에 비교해 경제적이며, 높은 효율을 보인다는 장점을 가지고 있다. 하지 만, 막의 표면에 오염물질이 흡착하여 발생하는 막오염 현상으로 인해 막여과의 효율이 크게 줄어들게 된다. 다양한 종류의 막 중에서 세라믹 분리막은 친수성을 띄며, 화학적으로 안정되었기 때문에 오염방지에 효과적이다. 또한, 산화 그래핀 등을 활용한 복합막도 막오염을 예방하는 데 도움이 될 수 있다. 최근에는 막오염을 방지하고 시너지 효과를 얻기 위해 광촉매 분 리막이 해결책으로 제시되었다. 막 분리는 광촉매의 단점인 촉매의 낮은 재사용률을 보완할 수 있으며, 광촉매 반응은 오염을 막을 수 있다.

Concrete is one of the largest wastes, by volume, generated during the decommissioning of nuclear facilities, which significantly influences the projected costs for the disposal of decommissioning wastes. Concrete consists of aggregates and a cement binder. In radioactive concrete, the radioisotopes are mainly associated with the cement component. If the radioactive isotope can be separated from the concrete to below the clearance criteria, the volume of radioactive concrete waste could be reduced effectively. We were studied to separate the radioactive materials from the concrete by using the thermomechanical and chemical treatment processes, sequentially. From the study, separated aggregate could be treated to achieve the clearance level. However, these processes generate a large volume of secondary acidic radioactive wastewater, which might be a critical problem to reduce the volume of radioactive concrete waste. In this research, separating the 137Cs and 90Sr from dissolved concrete wastewater to below the discharge criteria by precipitation method, it would be released to the environment under industrial waste guidelines. The experiments were conducted to using a simulated radioactive wastewater, formed by the dissolution of concrete within HCl, which was spiking the 137Cs and 90Sr, respectively. In addition, we applied the chemical precipitation methods with wastewater, using ferrocyanide for 137Cs and BaSO4 coprecipitation for 90Sr. As a result, targeted radionuclides could be removed to the discharge level (137Cs: 0.05 Bq·ml−1, 90Sr: 0.02 Bq·ml−1) by precipitation method. Therefore, it could reduce the secondary wastewater effectively by precipitation method and enhance the additional volume reduction for radioactive concrete waste.

Radioactively contaminated metal components from a nuclear power plant must be decontaminated to reduce the risk of radiation exposure to workers, which can be cleaned using a foam decontamination used to reduce the amount of wastewater significantly. Metal components with a fixed radioactive contamination can be effectively decontaminated using a foam consist of 0.5wt% nonionic surfactant, 0.5 M H2SO4, and 0.2 M Ce(SO4)2. However, strongly acidic wastewater is generated from the decontamination method, which contains a high concentration of the nonionic surfactant and ionic materials with radioactive nuclides. This wastewater must be treated as a stable form. In this study, an integrated process of precipitation and low pressure distillation was evaluated for the treatment of wastewater. It was confirmed that the surfactant and ionic materials were effectively removed from the wastewater through the integrated process.

자기공명영상(MRI) 장비의 조영제로 흔히 사용되는 가돌리늄(Gd)은 매우 안정된 상태로 하수처리과정에서 거의 제거되지 않고 수환경으로 유입된다고 알려져 있다. 따라서 본 연구에서는 세 가지의 공법으로 하수처리를 하는 부산 수영 하수처리장에서 채취한 하수 시료의 공정별 용존 희토류 원소의 제거율 및 수환경으로 배출되는 인위적 기원 Gd (Gdanth)의 배출량을 평가하고자 하였다. 용존 희토류 원소는 공정별 처리 단계에 따라 무거운 희토류 원소(Tb-Lu)에 비 해 가벼운 희토류 원소(La-Eu)에서 농도가 감소하는 경향을 보였다. 또한 일부 시료에서 나타난 음의(negative) Sm anomaly (<1)는 생물학적 제거 과정에서 Sm이 입자나 인산염과 흡착되어 함께 제거되었을 가능성을 시사한다. 모든 시 료에서 양의(positive) Gd anomaly (149±50, n=9)를 보였으며, 공정별로 측정된 Gd의 총 농도 중 Gdanth은 약 97% 이 상을 차지하는 것으로 나타났다. 이는 하수처리과정에서 Gdanth 이 거의 제거되지 않고 수영강 하류로 배출된다는 것을 의미한다. 일별 처리용량을 고려하여 각 공정에서 배출되는 Gdanth의 배출량은 259 mmol/day로 추정할 수 있다. 본 연 구의 결과는 하수처리장을 통해 수영만 연안으로 Gdanth이 지속적으로 배출될 것으로 예상되며, 향후 Gd의 중장기적인 관측이 필요함을 시사한다.

The frequent detection and occurrence of micropollutants (MPs) in aquatic ecosystems has raised public health concerns worldwide. In this study, the behavior of 50 MPs was investigated in three different domestic wastewater treatment plants (WWTPs). Furthermore, the Kruskal-Wallis test was used to assess the geographical and seasonal variation of MPs in the WWTPs. The results showed that the concentrations of 43 MPs ranged from less than 0.1 to 237.6 μg L-1, while other seven MPs including 17-ethynylestradiol, 17-estradiol, sulfathiazole, sulfamethazine, clofibric acid, simvastatin, and lovastatin were not detected in all WWTPs. Among the detected MPs, the pharmaceuticals such as metformin, acetaminophen, naproxen, and caffeine were prominent with maximum concentrations of 133.4, 237.6, 71.5, and 107.7 μg L-1, respectively. Most perfluorinated compounds and nitrosamines were found at trace levels of 1.2 to 55.3 ng L-1, while the concentration of corrosion inhibitors, preservatives (parabens), and endocrine disruptors ranged from less than 0.1 to 4310.8 ng L-1. Regardless of the type of biological treatment process such as MLE, A2O, and MBR, the majority of pharmaceuticals (except lincomycin, diclofenac, iopromide, and carbamazepine), parabens (except Methyl paraben), and endocrine disruptors were removed by more than 80%. However, the removal efficiencies of certain MPs such as atrazine, DEET, perfluorinated compounds (except PFHxA), nitrosamines, and corrosion inhibitors were relatively low or their concentration even increased after treatment. The results of statistical analysis reveal that there is no significant geographical difference in the removal efficacy of MPs, but there are temporal seasonal variations in all WWTPs.

다양한 산업 중에서 섬유 산업은 섬유 염색을 위해 가장 많은 양의 물을 사용하는데, 이는 여러 종류의 염료를 포 함한 폐수의 방대한 배출로 이어진다. 염료의 제거를 위한 방법에는 오존 처리, 흡착 등의 다양한 처리 방법이 존재한다. 하 지만 이러한 처리 방법은 폐수 재사용의 문제로 인해 처리 가격이 상승하기 때문에 성공적이지 못하다. 이에 대한 대안으로 막분리 공정이 폐수의 염료 처리를 위한 가장 적절한 기술로 보고되고 있다. 이때 사용되는 분리막은 고분자 분리막과 세라 믹 분리막으로 나눌 수 있다. 세라믹 분리막의 장점에는 세척의 용이함, 긴 수명, 내열성, 내화학성, 그리고 기계적 안정성이 있다. 세라믹 분리막은 다양한 원료로 만들 수 있으며, 점토, 제올라이트, 플라이 애시와 같은 천연 재료는 저렴하고 구하기 용이하다. 본 리뷰에서 폐수처리는 크게 한외여과(ultrafiltration), 정밀여과(microfiltration), 그리고 나노여과(nanofiltration) 세 가지 공정으로 나누어져 있다.

Abstract Recently, the circular economy aiming at elimination of waste and the continual use of resources has attracted a lot of attentions. In the circular system, the resource recovery uses the recycled wastes as the raw material to manufacture new valuable products. This work focuses on a low-cost process, in which an activated carbon (AC) adsorbent was prepared from waste cation exchange resin by calcination and HNO3 activation hydrothermal method. Surface structure and chemistry of AC were characterized by SEM, XRD, FTIR and Boehm titration. It was found that the acid treatment could increase the number of pores and the content of oxygen-containing functional groups on AC surface. In the adsorption experiment, Methylene blue (MB) was used to assess the adsorption capacity of AC. Experimental results showed that the highest efficiency of MB removal was achieved by AC with modification of 4M HNO3, showing the acidification effect on the adsorption capacity of AC. Adsorption isotherms of Langmuir and Freundlich were employed to fit the experimental data. It was shown that MB adsorption on AC is more consistent with Langmuir model that assumes a homogeneous adsorption. In the adsorption kinetic analysis, the adsorption was found to follow the pseudo-second-order model, indicating that adsorption of MB on acidified AC is dominated by chemical adsorption. The study revealed that the waste ion-exchange resin is a proper precursor of carbon adsorbent for MB dye. This low-cost method would specifically reduce the environmental cost of waste disposal.

N-nitrosodimethylamine (NDMA) is a potent carcinogen that is frequently detected nitrosamine from water chloramination. This study investigated the occurrence of NDMA and its potential precursor, ranitidine (RNT), in four wastewater treatment plants (WWTPs). Additionally, the effects of chloramination methods and oxidative pretreatment on the NDMA formation potential (FP) were assessed. Concentration levels of NDMA in the WWTPs waters ranged from 2.5 (detection limit) to 72.6 ng/L, while RNT values ranged from 1.32 to 186.9 ng/L. Further study indicated that the NDMA-FPs from chloraminated wastewaters varied between 36.2 and 227.8 ng/L. Nonetheless, chloramination methods and oxidative pretreatment significantly impacted the NDMA-FP levels. For example, breakpoint chlorination and stepwise chloramination promoted NDMA-FP when compared to preformed chloramination, which could be attributed to the formation of dichloramine and chlorine species. In contrast, prechlorination was found to effectively mitigate NDMA-FP, based on integrated ultraviolet (UV) irradiation. Notably, UV irradiation with free chlorine (UV/Cl2) or permanganate (UV/MnO4 -) reduced NDMA-FP by up to 70%. This study suggests that UV/MnO4 - and UV/Cl2 may be used as alternative mitigation strategies for reducing nitrosamine-FP in the water treatment process.