검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 17,550

        5642.
        2015.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : This study evaluated the feasibility of implementing protected-permissive left-turn (PPLT) signals at three-leg signalized intersections. METHODS: A three-leg signalized intersection with permissive left-turn was first selected. A VISSIM simulation model was constructed using data collected from the test site. The VISSIM network was calibrated by adjusting related parameter values in order to minimize the difference between the simulated and surveyed critical gap. The calibrated network was validated by the number of waiting left-turning vehicles per cycle. Finally, the mobility and safety measures were extracted from simulation runs in which permissive, protected left turns as well as PPLTs were realized based on diverse traffic volume scenarios. RESULTS : The mobility-related measures of effectiveness (MOEs) of the case with PPLT outperformed the other two left-turn treatment scenarios. In particular, the average waiting time per cycle for the left-turn vehicles in the case with PPLT was reduced by 30 s. The safetyrelated MOEs of the case with PPLT were somewhat higher than those in the case with protected left-turns and much higher than those in the case with permissive left-turns. CONCLUSIONS : Based on the mobility- and safety-related MOEs generated from the VISSIM simulation runs, the use of PPLT seems to be feasible at three-leg signalized intersections where the left-turn is permissive and a pedestrian signal exists at the conflicting approach. However, in order to use the PPLT in earnest, it is necessary to revise the road traffic act, traffic signs, and related manuals.
        4,000원
        5643.
        2015.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: This study investigates the mechanical performance of carbon-capturing concrete that mainly contains blast furnace slag. METHODS: The mixture variables were considered; these included Portland cement content, which was varied from 10% to 40% of the blast furnace slag by weight. The specimens were exposed to different conditions such as high N2 and O2 concentrations, laboratory conditions and high CO2 conditions. Mechanical performances, including compressive and flexural strengths and carbon-capturing depth, were evaluated. RESULTS : The slump, air content and unit weight were not affected significantly by the variation in cement content. The strength development when the specimens were exposed to high purity air was slightly greater than that when exposed to high CO2. As the cement content increased the compressive and flexural strength increased but not considerably. The carbon-capturing capacity decreased as the cement content increased. The specimens exposed in the field for 70 days had flexural strength greater than 3 MPa. CONCLUSIONS : The results indicate that cement content is not an important parameter in the development of compressive and flexural strengths. However, the carbon-capturing depth was higher for less cement content. Even after field exposure for 70 days, neither any significant damage on the surface nor any decrease in strength was observed.
        4,200원
        5644.
        2015.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from 16.7 m3/s to 10.4 m3/s. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from 52.9 m3/s to 47.2 m3/s. The total flowoff reduced from 43,261 m3 to 38,551 m3, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by 5195.7 m3, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.
        4,000원
        5645.
        2015.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        To study the characteristics of ZTO, which is made using a target mixed ZnO:SnO2= 1:1, the ZnO and SnO2 were analyzed using PL, XRD patterns, and electrical properties. Resulting characteristics were compared with the electrical characteristics of ZnO, SnO2, and ZTO. The electrical characteristics of ZTO were found to improve with increasing of the annealing temperature due to the high degree of crystal structures at high temperature. The crystal structure of SnO2 was also found to increase with increasing temperatures. So, the structure of ZTO was found to be affected by the annealing temperature and the molecules of SnO2; the optical property of ZTO was similar to that of ZnO. Among the ZTO films, ZTO annealed at the highest temperature showed the highest capacitance and Schottky contact.
        4,000원
        5646.
        2015.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        For rear metallization with Al paste, Al back contacts require good passivation, high reflectance, and a processing temperature window compatible with the front metal. In this paper, the effect of the firing ambient during the metallization process on the formation of Al rear metal was investigated. We chose three different gases as ambient gases during the firing process. Using SEM, we observed the formation of a back surface field in N2, O2, and Air ambients. To determine the effect of the ambient on Voc, the suns-Voc tool was used. In this study, we described the mechanism of burn-out of organic materials in Al paste during the firing process. The oxygen ambient plays an important role in the burn-out process. We calculated the efficiency with obtained the back surface recombination velocities using PC1D simulation. It was found that the presence of oxygen during the firing process influenced the uniform back surface field because the organic materials in the Al paste were efficiently burned out during heating. The optimized temperature with oxygen flow shows an absolute efficiency of 19.1% at PC1D simulation.
        4,000원
        5647.
        2015.07 구독 인증기관 무료, 개인회원 유료
        Limelight 사건의 연방 순회법원에서의 항소심 이전에는 단일 행위자(Single Entity)에 의하여 청구항의 모든 요소들이 실행될 경우에만 35 U.S.C. § 271 (a) 하에서 그 행위자에게 직접침 해에 대한 책임을 지게 하였고, 그로 인하여 청구 항의 모든 요소들이 복수의 행위자들에 의하여 공 동으로 실행되는 경우에는 공동으로 직접침해에 대한 책임을 지게 할 수 없는 문제가 있었다. Limelight 사건의 항소심에서는 이와 같은 문제 에 대하여 기존의 판례와 달리 굳이 단일 행위자 만이 아닌 복수 행위자도 공동으로 직접침해에 대 한 책임을 질 수 있다고 판결하였고, 그 법리 근거로서는 미 연방 특허법에 Common Law의 불법 행위 책임자론을 적용하여 해석함에 따르는 것이 었다. 그러나, 연방 대법원에서의 상고심에서는 연방 특허법과 Common Law는 태생적으로 전혀 별개의 법 체계에 속하기 때문에 항소심에서의 법 리 근거는 이런 사상에 부합하지 않음을 이유로 항소심 결과를 번복하고 파기 환송하며 기존 판례 를 재확인 하였다. 이 사건과 같은 판례가 아직 없는 한국법 체계 하에서 이와 유사한 사건의 결과가 미국의 경우와 같지는 않을 것으로 보인다. 그 이유는, 한국 민법 상의 학설은 미국과 달리 직접 침해가 성립해야만 간접침해가 성립된다고 보지 않기 때문에, 한국 특허법 체계하에서 다수 행위자들에 의한 공동 직 접침해 성립 여부를 따지는 일 자체가 무의미할 수도 있기 때문이다. 따라서, 한국 법적 학설과 유 사 판례를 고려하여 실제로 이와 같은 사건을 한 국에서 재판했을 경우, 미국과 달리 복수의 행위 자에 의한 공동 침해 성립이 가능하고, 이에 대한공동 책임을 지게 되는 결과 또한 가능하다.
        4,500원
        5648.
        2015.07 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문은 구약성서와 유대주의, 그리고 시오니즘(Zionism)에나타나 있는 배타성이 기독교 선교의 공격성과 어떤 연관관계가 있는지를 선교 역사적으로 고찰한 연구이다. 기독교 신앙은 유대교에 뿌리를두고 있는 종교이고, 그 유대교는 타민족에 대한 배타적 선민(選民)사상을 뿌리에 두고 있기 때문에, 이 문제는 기독교 신앙의 정체성뿐만 아니라, 기독교 신앙을 믿지 않는 사람들, 즉 선교 현장의 타자(他者)를 대하는 우리들의 선교적 입장을 결정할 수 있는 중요한 문제이다.더 협소하게 논의를 전개시켜 나간다면, 이것은 선교학과 구약신학간의 대화를 통해서 해소되어야 할 신학적 쟁점이고, 이 논문 역시이러한 목적으로 연례 구약학회에서 발표되었다. 따라서 이 논문은 구약성서의 ‘전사로서의 하나님’에 대한 개념을먼저 살펴보고, 그 결과 나타난 유대주의의 공격성과 배타성을 역사적 으로 규명한다. 이런 전통에서 배출된 예수 그리스도의 ‘군대귀신들린 자’ 사건(막 5:1-20)은 유대주의의 공격성과 배타성을 극복할수 있는 성서학적이며 선교학적인 가능성을 제시하고 있다. 거라사(제라시)에서 군대 귀신들린 자를 축사하신 그리스도는 그를 유대의 땅으로 초청한 것이 아니라 고향 데가볼리로 돌려 보내셨다. 이것을 필자는 유대주의의 배타성과 공격성에서 벗어나 그리스-로마 문명과 공존할 수 있는 선교적 가능성을 제시한 것이라 보았다.이런 개방성으로서의 초대야말로 다원화되고 글로벌화 된 세상을 향한 선교적 복음의 미래라고 해석하였다.
        6,000원
        5649.
        2015.07 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 노인복지정책을 통해 한국 복지국가의 유형 및 특성, 한국 사회의 생산체제와 사회 불평등의 관계를 파악하고자 한다. 한국은 2018년에는 ‘고령사회’에 진입할 것으로 전망되고 있으며, 고령 사회로의 진입은 사회의 다양한 분야에 영향을 끼치고 있는데 주택, 의료, 사회복지 등 여러 분야에 영향 을 끼침으로써 사회비용을 증가시키고 있다. 즉 고령화 사회는 노인의 문제 좀더 나아가 그 부양가족만의 문제 뿐만이 아닌 전 국가적 문제로서 노령화에 따른 다양한 사회문제를 해결하지 못할 경우 전 국가적 부담과 사회적 재앙이 될 수 있기 때문에 국가 사회적 대응책이 시급하다. 노인의 빈곤은 노년기 경제생활의 취약성과 전생애에 걸쳐 누적되는 빈곤에 대한 위협, 가족이전 소득에 기대고 있는 공공부조의 취약 등을 들 수 있다. 이러한 현황 분석을 통하여 바람직한 노인정책을 방향을 제시하고자 하였다. 사적 이전 소득의 감소로 인한 공공부조 정책의 공고성, 노인 건강정책과 장기요 양서비스의 현실화, 퇴직제도의 개선과 사회복지 서비스의 욕구에 맞는 현실성 등을 제시하였다.
        5,200원
        5650.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        An ejector is an fluid transportation simplified device that generate relatively low pressure utilizing the kinetic energy of pressured fluid to provoke suction of another fluid, mix the two and discharge the mixture against a counter pressure. In this study, a parameter analysis was conducted to predict the ejector performance against various operating conditions. It was revealed that the loss coefficient of the nozzle, pressure ratio, flow rate and size of suction area has the greatest effect on the efficiency of the eductor and showed efficiency of eductor is proportion to increase of flow rate.
        4,000원
        5651.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The characteristics of temperature variation for laser diode welding system have been analyzed with numerical investigation. The laser diode is assembled with a cap and stem by projection welding. Resistance heat, in this process, is generated by electric current at the contact surface between cap and stem within a very short time. Temperature variation of laser diode is largely affected by the welding time and the heat generated from the surface. Maximum temperature of each component in the laser diode should be lower than the melting point except for cap and stem in order to prevent welding defect. Temperature distribution of each component in the laser diode is also affected by thermal conduction mechanism. Welding defect near the insulator occurs when the resistance heat is high. Appropriate resistance heat supply to the laser diode was about 400W. The results from this study could be applicable for optimal design of laser diode welding system.
        4,000원
        5652.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study aims to integrate sports uniform design into fashion as an effective communication means by analyzing the uniforms of women's pro basketball and volleyball teams in the country. As part of the research method, a literature review was conducted on the domestic pro sports background and women's basketball and volleyball uniforms. For empirical research, an analysis was performed of the uniforms of 12 teams in total: six women's pro basketball teams and six women's pro volleyball teams in the 2013~2014 league. The following results were obtained. First, in terms of formativeness, sleeveless shirts and shorts are basic in both basketball and volleyball. However, there are remarkable differences between the two. Shirts in volleyball are tighter, with the body figure visible, and shorts are shorter in length than those in basketball. Most basketball uniforms have a V-neckline and are collarless, while volleyball uniforms have a standup collar in all teams. Second, both basketball and volleyball apply the representative color of the sponsoring company and the team's typical color, but common colors, such as blue, navy, and white, are used in many teams, which fails to represent a uniquely differentiated image. Third, the logo or symbol of a sponsor is excessively applied to both basketball and volleyball uniforms. This downgrades the uniform's own esthetic features. Fourth, a fashionable uniform design, that reflects the bodily characteristics of women and the characteristics of the sports game would be a beneficial communication tool for all the tiers to become involved in participation and entertainment.
        4,600원
        5653.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This research carried out an analysis on input cost and leakage reduction effect by leakage reduction method, focusing on the project for establishing an optimal water pipe network management system in the Taebaek region, which has been executed annually since 2009. Based on the result, optimal cost-benefit analysis models for water distribution network rehabilitation project were developed using DEA(data envelopment analysis) and multiple regression analysis, which have been widely utilized for efficiency analysis in public and other projects. DEA and multiple regression analysis were carried out by applying 4 analytical methods involving different ratios and costs. The result showed that the models involving the analytical methods 2 and 4 were of low significance (which therefore were excluded), and only the models involving the analytical methods 1 and 3 were suitable. From the result it was judged that the leakage management method to be executed with the highest priority for the improvement of revenue water ratio was installation of pressure reduction valve, followed by replacement of water distribution pipe, replacement of water supply pipe, and then leakage detection and repair; and that the execution of leakage management methods in this order would be most economical. In addition, replacement of water meter was also shown to be necessary in case there were a large number of defective water meters.
        4,300원
        5654.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to evaluate the sodium-related dietary attitudes, behaviors, and nutritional knowledge in university students according to the practice of dietary guidelines for Koreans established by the Ministry of Health and Welfare, Republic of Korea. Based on the total practice score related to the dietary guidelines (PDG), we classified subjects into a “low practice of the dietary guidelines (LPDG)” group (n=94, male=43, female=51) (total score of PDG ≤13) and a “high practice of the dietary guidelines (HPDG)” group (n=56, male=32, female=24) (total score of PDG >13). Subjects were asked about general characteristics, lifestyle, salt-related dietary attitudes, behaviors, and nutritional knowledge using a questionnaire. The LPDG group had more subjects who were breakfast skippers (p<0.001) compared to the HPDG group. The LPDG group (31.26) had a significantly lower score in terms of salt-related dietary attitudes compared to the HPDG group (33.77) (p=0.0042). The score for salt-related dietary attitudes was significantly higher in the HPDG (32.52) group than in the LPDG (29.91) group (p=0.0041). There was no significant difference in the total score for salt-related nutrition knowledge between the groups. The correlation analysis indicated that the dietary guidelines practice score had a positive correlation with the salt-related dietary attitude score (r=0.3593, p<0.0001) and the dietary attitude score (r=0.3443, p<0.0001) after adjustments for sex. These results show that the degree of adherence to the dietary guidelines for adults may be related to sodium-related dietary attitudes, behaviors, and nutrition knowledge.
        4,200원
        5655.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        문둥이박쥐(Eptesicus serotinus)의 먹이원 구성을 파악하기 위하여 총 25개체의 암컷 성체로부터 배설물을 수집하여 분석하였다. 박쥐의 포획은 경북 안동시의 문둥이박쥐 집단 서식지가 확인된 교량을 대상으로 하였으며, 2014년 5월부터 9월까지 매월 5개체를 대상으로 하였다. 총 100개의 배설물이 수집되었으며, 고배율 현미경(50 × binocular microscope)을 이용하여 곤충의 목(Order)별로 구기(mouthpart), 다리(leg), 날개(wing), 더듬이(antenna), 딱지날개(elytra) 등 구분할 수 있는 특징을 이용하여 동정하였다. 배설물 분석결과 문둥이박쥐의 먹이원으로 이용된 분류군은 딱정벌레목(Coleoptera), 벌목(Hymenoptera), 파리목(Diptera), 노린재목(Hemiptera) 등 4개였다. 먹이원 가운데 딱정벌레목은 6월을 제외하고 5, 7, 8, 9월 모두에서 확인되었으며, 특히 5월과 7월에는 오직 딱정벌레목만 확인되었다. 그 외 노린재목, 파리목, 벌목은 각각 9월, 6월, 8월에 먹이원으로 이용되는 것으로 나타났다.
        4,000원
        5656.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The study is focused on analyzing the SNS using characteristics of the people surveyed, as for the SNS acceptance channel of the food service corporations, accounted voluntarily for 71%. The SNS food service information regarding information of menu, location of store, price, coupon, taste evaluation, event, promotion, reservation and store atmosphere was researched. The most preferred information sharing for SNS food service were researched and found Facebook, blog and others in increasing order. The most preferred media to obtain SNS food service information were smart phone, desktop computer and others. The result of verifying differences in the perceived ease of use were also evaluated according to the food service corporation of SNS using characteristics of the people and was found: the longer period of SNS use, longer was access time: more number of visiting times, higher perceived ease of use. As for the difference in the perceived service value: longer the period of SNS use, more preferred was the blog: the more number of visiting times, the higher perceived service value. As for the difference in the online mouth-to-mouth intention: longer the period of SNS use, longer was access time: the more number of visiting times, the higher online mouth-to-mouth intention. Therefore, these research results provide useful implications in the working-level aspects such as providing basic data and the academic approach of the study, when the food service corporations establish marketing strategies through SNS.
        4,200원
        5657.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 을숙도 큰고니 서식지의 생태계 건강성 유지방안을 마련하기 위하여 시스템 사고를 통해 큰고니 서식환경 변화 현상에 대한 피드백 구조를 분석하였다. 을숙도 내 큰고니와 기타 수조류의 개체수에 대한 인과지도를 통해 을숙도 큰고니 개체수는 휴식환경 및 먹이환경 변화와 관계가 있음을 확인하였다. 큰고니의 휴식환경 인과지도에서는 탐조 및 탐방활동, 수위, 소음에 의한 휴식환경 변화가 큰고니 개체수에 영향을 미치는 것을 확인하였으며, 큰고니의 먹이환경 인과지도를 통해 담수의 면적, 수면동결, 을숙도 염분, 새섬매자기 밀도에 의한 먹이환경 변화가 큰고니 개체수에 영향을 미치는 것으로 확인 하였다. 마지막으로 통합인과지도를 통해 낙동강하굿둑 방류량과 건설행위가 큰고니의 휴식환경과 먹이환경에 영향을 미치는 변수임을 파악하였으며 큰고니 서식환경 관리를 위한 전략지점으로 선정하여 관리방안을 제시하였다. 연구의 결과는 장기적 관점에서 을숙도의 생태계 건강성을 유지를 위한 관리방안마련에 기여할 것이다.
        4,800원
        5658.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        오늘날 지구온난화를 줄이기 위한 노력으로 온실가스 저감 기술 개발에 대한 노력이 정부차원에서 이루어지고 있으며 그 일환으로 국내에서는 2006년부터 자동차용 경유에 바이오디젤이 혼입되고 있다. 비록 일부 품질 기준상의 개선사항이 남아 있고 대부분의 원료를 수입에 의존하고 있다는 점에서 제한요소가 있음에도 2013년 기준 년간 400kton를 생산하고 있으며 향후 신재생에너지 연료 혼합의무화 제도(RFS)가 시행되면 그 생산양은 더욱 증가할 것으로 예상되는바 원료 다변화를 통한 원료 불균형 해소와 이에 따른 적절한 연구 개발이 필요하다. 본 연구에서는 신규 바이오디젤 원료로 검토되고 있는 라우릭산 메틸에스터(C12:0 FAME) 중심의 팜핵유(PKO, Palm Kernel Oil)와 코코넛유 유래 바이오디젤을 대상으로 국내 품질기준 중 차량 연소계통과 저온성능에 문제를 일으킬 수 있는 글리세린 함량 분석과 관련하여 기존 시험방법(KS M 2412)의 적용 가능성을 조사하였다. 이를 바탕으로 기존 분석조건에서 발생되는 카프릭산 메틸에스터(C10:0 FAME)와의 피크겹침, 총글리세린 도출관련 계산평형상수 등에 대한 개선 사항을 도출하고 보다 다양한 원료를 이용한 바이오디젤 내 글리세린 분석 가능한 시험방법 개발 가능성을 검토하였다.
        4,600원
        5659.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Concerns about water quality in the Nakdong River have been raised because the Nakdong River will change from a lotic environment to a lentic environmental due to the installation of eight weirs to be constructed as part of the Four Major Rivers Restoration Project. The rapid urbanization and industrialization of the middle and the lower reaches of Nakdong River causes the indiscreet discharge of uncleanly living sewage and industrial wastewater. And the water quality of lower reaches of Nakdong River is getting seriously worse. Owing to the water shortage of Nakdong River and the closing of reaches because of the estuary dyke in the dry season, the velocity of a moving fluid is almost accumulated under 0.03m/sec. Then a pollutant is piled up on the bottom of the river. Polluted sediment is formed and nutrition level of water is increased more and more. The eutrophication state propagated to dark brown or green from eutrophication often comes out. Therefore in this study, we measured Chl. a of chlorophyll sensor (YSI6600V2) and aceton extraction through field observation in the Nakdong River and Samrangjin. And we evaluated the reliability of chlorophyll sensor. In correlation analysis between chlorophyll sensor and aceton extraction, it shows high relation in general. And it also shows high relation among the chlorophyll sensor and aceton extraction of the dominant diatom (Skeletonema costatum), Dinophyta (Prorocentrum minimum) in the Nakdong River estuary by laboratory analysis results.
        4,200원
        5660.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        프리스트레스 콘크리트 정착부의 설계를 위해 AASHTO 및 PTI에서 관련 설계식을 제안하고 있다. 그러나 이러한 설계식은 구조물의 긴장력이 단순 지압판을 통해 구조 전반으로 전달된다는 가정으로 유도된 것으로 실제 구조물에 적용되는 상용 정착구의 형태와는 차이가 있다. 이 논문에서는 하중전달 시험에 의한 실험적 방법과 3차원 고체요소를 사용한 비선형 유한요소해석 프로그램을 이용한 해석적 방법을 통해 정착구의 형상 변수에 따른 정착부의 거동특성 변화에 대한 연구를 수행하였다. 하중전달시험 결과에서 얻어진 하중변위 곡선 및 극한하중 값을 해석을 통해 얻은 결과와 비교하여 유한요소모델의 적합성을 확인하였다. 또한 정착구의 리브의 설치위치, 리브의 개수, 리브의 설치길이를 주요 변수로 설정하여 형상변수에 따른 매개변수 연구를 수행하였다.
        4,000원