PURPOSES : This study empirically analyzes the determinants of fatal accidents based on raw data on traffic accidents occurring in Chungnam in 2020. METHODS : Regression models based on theoretical arguments for fatal traffic accidents are estimated using a binomial logit model. RESULTS : The prediction model for fatal accidents is affected by the degree of urbanization of the region, month and day of the accident, type of accident, and type of law violation. In addition, speeding or illegal U-turns among law violations appear more likely to result in fatal accidents. The road surface conditions at the time of the accident do not show a significant difference in the probability of fatality among traffic accidents. However, the probability of a fatal accident is rather lower in case of a snowy road; this is plausible, as drivers tend to drive more carefully in bad weather conditions. CONCLUSIONS : Among traffic accidents, fatal accidents appear to be affected by the time and place of the accident, type of accident, and weather conditions at the time of the accident. These analysis results suggest policy implications for reducing fatal accidents and can be used as a basis for establishing related policies.

PURPOSES : Traffic congestion on freeway generally occurs when the traffic volume exceeds the road capacity. Most traffic manuals *such as the Korean Highway Capacity Manual) present the highway capacity as approximately 2,000 units/hour. However, in the real world, freeway congestion occurs for various reasons, including unusual driver behaviors, physical road limitations, and large traffic volumes. Thus, the flow rate at a traffic breakdown can have a wide range of volumes. Therefore, using 5-min volume and speed data from the field, this study explores the stochastic features of traffic breakdowns on major urban freeways in Seoul. METHODS : First, a breakdown point is defined by applying a wavelet transform to identify the sharp drop in the speed data near freeway bottlenecks. Second, based on the flow rate at and before a breakpoint, a survival analysis is performed to construct the probability distributions of the traffic breakdown. Log-rank tests are also conducted to verify the similarities of the distributions between freeways. RESULTS : The analysis results confirm the stochastic features of the urban freeways in Seoul. Specifically, the freeways have typical S-shaped distributions of breakdown probabilities. However, the distributions rise steeply (exceeding a 50% of breakdown probability) at flow rates of 1,150 vphpl to 1,700 vphpl; this is lower than the general expectation. CONCLUSIONS : The statistical differences in the probability distributions for freeways indicates that applying a general standard to every urban highway could raise problems. This study has a limitation in identifying the specific causes of traffic congestion owing to the by physical relationships between individual vehicles. An investigation if vehicle trajectory data should be conducted to examine these aspects in further detail.

PURPOSES : In this paper, problems and improvements in pavement marking standards are proposed as a result of the analysis of domestic/foreign standards and field data. METHODS : In this study, the US FHWA and all state standards were analyzed and domestic pavement marking standards were compared and analyzed. In addition, national highway marking test data, namely the Yeoncheon Test-Bed data, and data from Hawkins et al. (2015) were analyzed. Based on this, problems and improvements in the Korean pavement marking standards are proposed. RESULTS : As a result of literature and field data analysis, various problems were found in the Road Traffic Act and National Police Agency manual. In this standard, there is no definition of Qd; the RD reference value is set too low; and the RW and RR reference values are difficult to be considered reasonable values. CONCLUSIONS : There is an aspect in which the standard items and values of pavement markings are set under some policy judgment. Therefore, it is necessary to properly revise the standards, considering technical and economic aspects.

이 연구는 중국의 대중강연 프로그램 백가강단의 ‘2차 당송팔대가강연’에서 강연 진이 당송팔대가에 대해 문화유산으로 규정하는 담론의 실제 내용을 밝힌 것이다. 주요하게 고찰한 내용은 다음과 같다. 첫째, 당송팔대가를 총체적 문화 역량을 보유 한 집단이고 정신적·문예적 가치를 지닌 문화 본보기로 틀 짓는 강연 속의 프레임을 규명했다. 둘째, 당송팔대가를 덕행의 사표, 인격의 표본, 전인의 기준으로 해설하는 강연진의 담론을 분석하여 당송팔대가 전체를 중국의 정신규범으로 정립하는 근거내 용을 구체적으로 밝혔다. 셋째, 당송팔대가 문예를 혁신의 전형, 창조의 모범으로 해 설하는 강연진의 담론을 분석하여 당송팔대가의 창작을 중국의 문예전범으로 정립하 는 준거내용을 구체적으로 밝혔다. 당송팔대가를 중국의 우수한 전통문화로 홍보하 는 ‘2차 강연’에 대해 문화소프트파워 강화 전략의 일환으로 규정하고자 한다.

Data commentary is an important text type in research articles; however, its discourse model is often challenging to access because it is embedded in the upper genres such as textbook, weather forecast, and journal article. This study aims to establish a discourse model of data commentary, with a focus on academic research papers in Economics and Business administration journals. To accomplish this, this study employs Move analysis and SF-MDA(Systemic Functional-Multimodal Discourse Analysis) to investigate the moves of data commentaries and the metafunctional meanings of each step. The results indicate that the data commentary discourse model consists of three moves: (1) summarizing the topic and methodology, (2) representing figure and numbers, and (3) analyzing and commenting on results. Additionally, 22 steps are identified for each move that creates metafunctional meaning: ideational, interpersonal, and textual.

본고는 현대중국어에서 대표적인 형식동사(dummy verb) 중 하나인 ‘弄’이 문장에 서 결합하는 성분에 따라 상이한 의미항을 분석하고 각 의미항이 발생하게 된 연유 를 프레임 의미론을 적용하여 분석한 연구이다. ‘弄’은 대다수 동사로 쓰이며 ‘보어’, ‘목적어’와 결합하여 문장을 이룬다. 정도보어와 결합할 때 문장에서 사동의 의미가 발현되어 보어 뒤에 따르는 대상이나 상황의 변화를 발생시킨다는 의미를 가진다. 결과보어와 결합할 때는 선행한 동사를 대체하거나 결과를 나타내는 단어 앞에 쓰여 결과를 강조하기 위한 문법적 장치로 작용하는데, 이때 ‘弄’에는 사동의 의미가 내포 되어 있다. 또한 바로 목적어를 이끌 때는 ‘획득’, ‘제작’, ‘다루다’ 등의 의미를 가진 다. 이 같은 다양한 의미가 생성될 수 있는 가능성은 ‘弄’의 원형인 손으로 옥을 다 루는 형상에서 유추할 수 있는데, 프레임 의미론의 관점에서 윤곽부여를 통해 초점 이 손에 부여될 때와 옥에 부여될 때 서로 다른 의미항이 생성될 수 있다.

The carbon concentration in the carburized steels was measured by electron probe microanalysis (EPMA) for a range of soluted carbon content in austenite from 0.1 to 1.2 wt%. This study demonstrates the problems in carbon quantitative analysis using the existing calibration curve derived from pure iron (0.008 wt%C) and graphite (99.98 wt%C) as standard specimens. In order to derive an improved calibration curve, carbon homogenization treatment was performed to produce a uniform Kα intensity in selected standard samples (AISI 8620, AISI 4140, AISI 1065, AISI 52100 steel). The trend of detection intensity was identified according to the analysis condition, such as accelerating voltage (10, 15, 30 keV), and beam current (20, 50 nA). The appropriate analysis conditions (15 keV, 20 nA) were derived. When the carbon concentration depth profile of the carburized specimen was measured for a short carburizing time using the improved calibration curve, it proved to be a more reliable and accurate analysis method compared to the conventional analysis method.

The predator-prey interaction in freshwater ecosystems is a crucial area in the ecological study field and one of example to find such interaction is to investigate stomach contents. However, traditional method through visual inspection often induce misidentification, as it depends critically on intactness of physically visible data. In this study, we utilized Next-Generations Sequencing (NGS) technology to test the applicability stomach content analysis and overcome such limitation. NGS was applied to analyze the stomach contents of the Hemibarbus labeo, Tachysurus fulvidraco, and Plecoglossus altivelis collected in the lower part of Nakdong River. As a result, T. fulvidraco had a higher number of Animalia operational taxonomic units (OTUs) intake rate than H. labeo. At the same time, P. altivelis had higher number of Plantae OTUs intake rate than T. fulvidraco and higher Protozoa OTUs intake rate than H. labeo respectively. Therefore, NGS technology application enable to overcome traditional method’s limitation and discover hidden interspecific interaction which can further be used in appropriate habitat assessment.

본 연구의 목적은 텍스트 마이닝과 소셜 네트워크 분석을 활용한 소비자 맞음새 평가의 주요 특징을 규명하는 것이다. 이를 위해 SNS에서 수집된 소비자의 2,000여건의 의복 맞음새 평가 후기로부터 의복 맞음새 관련된 텍스트 데이터를 추출하고 의미연결망 분석과 CONCOR 분석을 수행하였다. 연구 결과, '팬츠'와 '스커트'가 많은 맞음새평가 어를 공유하며 다양한 형태로 평가되는 것을 확인하였고 의복의 길이가 가장 많이 평가되었다. 인체부위 중 '허리'는 다양한 의복의 맞음새를 평가하는 가장 중요한 부분이며 의복 맞음새평가어 중 '넓은', '큰', '와이드한', '긴' 등이 가장 많이 사용되는 것으로 나타났다. 본 연구는 소비자 맞음새 평가에 사용된 언어의 구조적 관계와 의미를 구체적으로 규명하고 의복 맞음새의 향상을 위한 실증적 기초 자료를 제공하는데 의의가 있다.

High-risk microbial pathogens are handled in a biosafety laboratory. After experiments, the pathogens may remain as contaminants. To safely manage a biosafety laboratory, disinfection of microbial contaminants is necessary. This study was carried out to evaluate the effect of UV-C irradiation for the disinfection of a high-risk plant pathogenic bacterium Erwinia amylovora in a laboratory setting. For the test, the bacterium (8.7 × 106 CFU/ml) was embedded on the surface of PDA and placed on the work surface in a biosafety cabinet (Class 2 Type A1), and on the three different surfaces of the laboratory bench, laboratory bench shelf, and the floor which were positioned in a straight line from the UV lamp installed in the ceiling of the biosafety laboratory (BSL 2 class). UV-C irradiation was administered for 10min, 30min, 1 hr, 2hr, 3 hr, and 4hr, respectively. The reduction rate of bacteria ranged from 95% to 99% in regard to 10 min irradiation, from 97% to 99% in regard to 30 min irradiation, from 99.8% to 99.9% in regard to 1 hr irradiation, and higher than 99.99% in regard to 2 hr irradiation. The bacterium was completely inactivated after 3 hr irradiation. A similar UV-C irradiation effect was obtained when the bacterium was placed at a distance of 1 m from the three different surface points. Bacterial reduction by UV-C irradiation was not significantly different among the three different surface points.

This study was carried out in order to provide suggestions with regard to optimal control methods for various odor emission facilities (162 companies and 26 industrial classifications) through comparative analysis of effective odor treatment technologies for each type of odor substance by literature reviews, based on measured 22 odor substance data for 162 samples taken from A city. The industrial classification of Pulp showed the highest odor quotient (7,589 as average value) and was followed by the industrial classifications of Wastewater, Woods, and Furniture, indicating average odor quotient values of 2,361, 1,396 and 1,392, respectively. Absorption using chlorine dioxide and sodium hydroxide can be an optimal treatment method to remove the odor substances of sulfide and aldehyde groups. Biofilers with microbial communities will be effective to remove odors caused by volatile organic compounds (VOCs) and an absorption method using sulfuric acid is proper for the removal of odor substances caused by nitrogens.

The purpose of this study is to compare and analyze the flame retardant performance of Japanese cypress(Chamaecyparis obtusa) plywood, commonly used in indoor decoration, furniture, and tableware, by treating it with three different fire retardants with different primary ingredients. The experiment was conducted in compliance with Article 31, Paragraph 2 of the Enforcement Decree of the Fire Facilities Installation and Management Act and Articles 4 and 7-2 of the Flame Retardant Performance Standards. After flame time, after glow time, char length, and char area were measured. As a result, first, after flame time was measured at 0 seconds regardless of whether the flame retardant treatment was applied. Second, after glow time was relatively long, measuring 22.7 seconds without treatment, which is likely due to the weak fire resistance and high concentration of carbon monoxide generated by the chemical characteristics of the Japanese cypress itself. Third, it was confirmed that the effects of the primary ingredient, phosphorus, in the flame retardant treatment varied depending on the technological development of the manufacturers of the same species of Japanese cypress plywood. In the future, it is expected that the results of this study will provide fundamental data to select flame retardant treatments that show high flame retardant performance according to the botanical characteristics of the wood.

This study analyzed the determinants that affect the purchase of ready-to-cook seafood products using the “Consumer Attitude Survey on Processed Foods” from 2018 to 2021. Dietary lifestyle, food awareness and preference survey questions were categorized, and factors affecting the purchase probability of ready-to-cook seafood were identified through a binomial logit model. The main research findings are as follows. First, consumers had higher preference for quality, safety, and new taste factors than health and price factors when purchasing HMR (Home Meal Replacement). Second, through binomial logit model analysis, the probability of purchasing ready-to-cook seafood products was low in the group pursuing taste and economy. On the other hand, the purchase probability was high in the group seeking convenience. Third, the purchase probability of ready-to-cook seafood products was higher in households with two or more persons than in single-person households. These results suggest that differentiated product development and marketing strategies should be needed for each consumer groups in the seafood convenience food market

Determination of explosion reference pressure is important in designing and testing flameproof enclosures (Ex d). Although relative humidity affects to explosion pressure, its effect is not well investigated for the gas group IIB, IIA, and I. This study tested explosion pressure for Ethylene (8 vol.%), Propane (4.6 vol.%), and Methane (9.8 vol.%), which are the representative gas of the gas group IIB, IIA, and I, at ambient temperature and atmospheric pressure (1 atm) under different relative humidity (0% ~ 80%). Ethylene- and Propane-air mixed gases generally tended to decrease as the relative humidity increased; however, explosion pressure was largely dropped at 20% of relative humidity compared to 0% and 10% of relative humidity. On the other hand, Methane-air mixture gas showed similar pressures at 0% and 10% of relative humidity; but no explosion occurred at more than 20%. The results of this study can be used in setting a testing protocol of explosion reference pressure for designing and testing a flameproof enclosure.