The purpose of this study is to introduce the village project for conservation and improvement of rural tourism village. So, in this study, the current rural tourism village and storytelling planning are examined and the village project presented in village planning is also examined. And this study propose the storytelling implementation of the village project through the case study related with the Susanri in Jeju. The results are summarized as follows. Firstly, it is important that each village projects are storytelling for tourism resource and improve rural tourism village. Secondly, it is necessary to define story range, action planning, and management agency of village projects. Thirdly, it is desirable that the village projects should be carried out as reviving the local community. Comparing to the storytelling tourism plan, there are few rural tourism plans so far, so, it is difficult to applicate the system of the village project, but, continuous studies in this line can help the rural tourism plan to ensure practicality.

In this paper, tin-waste resources were pulverized and separated by cut-mill and multi cyclone separator, respectively. After the cut-mill process, more than 98% of the Pb-Sn and Sn-Ag-Cu scraps were recovered, and the by-products consisting of metal and oxide could be reused as solder. The separation of pulverized powders was performed using the minimum fluidization velocity depending on the density of the materials. When the flow rate was 21 L/min (70% blower output), it had the highest separation efficiency.

In this study, agronomic characteristics and fatty acid composition of 121 flax (Linum usitatissimum L.) germplasms were analyzed. The flax germplasms had a fairly short growth period of 75-95 days. The plant height at maturity varied from 52 to 124 cm. The flower color varied from white to lilac and even purple. Early flowering flax germplasms had white flowers and were resistant to lodging. In early flowering flax germplasms, all agronomic characteristics, including growth period, plant height, branch number per plant, stem diameter, number of capsules per raceme, seed number per capsule, 1000-seed weight, and seed yield, were decreased. The average fatty acid composition of 121 flax germplasms comprised palmitic acid (5.3%), stearic acid (4.3%), oleic acid (29.7%), linoleic acid (13.1%) and linolenic acid (46.4%). The total content of unsaturated fatty acids ranged from 84~94% with an average of 88%. Among the fatty acids, linolenic acid (omega-3) content was the highest with a range of 36~54%. In five selected flax germplasms (Hollandia 1803, Red son, C & F Res Br 1767, Wiera, and Ireland 1657) with high linolenic acid (≥51%), total lipid and protein contents were 30~36% and 5.4~6.9%, respectively. Overall, flax can practically be adoptable into cropping systems in South Korea and utilized as a scenery crop, since flax has a short cultivation period with diverse flower colors.

Most of countries are trying to increase the supply of renewable energy as the substitute of the fossil energy for reducing greenhouse gas emissions. However, renewable energy sources account for only about 3.86% of the total Korea primary energy supply. To increase the rate of renewable energy in Korea’s energy consumption, various policies for expanding the use of renewable energy should be applied. Also these policies should be consider renewable energy resources distribution and regional inequality. In this study, the potentials of photovoltaic, wind power and bioenergy from rice straw, livestock waste and food waste are calculated and the distribution characteristic and regional inequalities are analyzed using Gini’s coefficient and Gini decomposition method. As the results, technical potentials of photovoltaic and wind power of city region(Gu) has more potential rate than theoretical potentials. Livestock waste has the most unequal distribution (Gini’s coefficient: 0.617) among renewable resources.

Background : Curcuma longa L., in the family Zingiberaceae, is distributed in tropical and/or sub-tropical regions mainly in India and China. This species is commonly called turmeric, powder is used as medicinal herbs and/or flavor enhancer. It has been cultivated in southern region mainly Jindo. However, it might be possible to extend cultivation regions due to rise in average temperature. In order to select superior lines based on agronomic characteristics, we analyzed multivariate and estimated selection effects from C. longa germplasm. Methods and Results : The C. longa germplasm were cultivated in an experimental field located in Eumseong, NIHHS, RDA. The harvested roots were investigated in agronomic characteristics included in yield and then considered its relationship among the 9 germplasm by multivariate analysis method. Results from principal component analysis (PCoA) showed that it represented 70.00% and 80.44% accumulated explanation from four and five principal compounds (PC). PCoA was conducted from 9 agronomic characteristics and then correlation coefficient has been showed by analysis between each main component value and agronomic characteristics. Value of the first PC was 2.25, 24.96% explanation of total dispersion, plant height, number of rootlet and weight of rootlet were correlated with a somewhat higher level as 0.41, 0.43 and 0.52. Value of the fifth PC was 0.94, 10.43% explanation of total dispersion, the number of shoots was correlated with a higher level as 0.87. Selection effects with outstanding candidate lines including higher lines were estimated at 126.13% in yield. Conclusion : These data on multivariate based on agronomic characteristics will be give us invaluable breeding information by selection of superior lines.

This study was carried out to investigate the vascular plants of the protected area for forest genetic resource conservation in the Korea national Baekdudaegan arboretum. The vascular plants collected 12 times (from April 2007 to August 2014) were consisted of total 569 taxa; 89 families, 289 genera, 489 species, 5 subspecies, 66 varieties and 9 forms respectively. The 20 taxa of Korean endemic plants and 21 taxa of Korean rare plants were investigated. The floristic regional indicator plants found in this area were 112 taxa comprising 2 taxa of grade Ⅴ, 8 taxa of grade Ⅳ, 23 taxa of grade Ⅲ, 40 taxa of grade Ⅱ, 39 taxa of grade Ⅰ. The introduced and naturalized plants were counted as 22 taxa, therefore naturalized ratio was 3.8%. 577 taxa listed consists of 223 taxa (39.2%) of edible plants, 168 taxa (29.5%) of medicinal plants, 202 taxa (35.5%) of pasture plants, 58 taxa (10.2%) of ornamental plants, 26 taxa (4.6%) of timber plants, 5 taxa (0.9%) of fiber plants and 4 taxa (0.7%) of industrial plants.

This system is made up of two main elements, recovery scenarios and resource allocation. The recovery scenarios provides the system with an optimized restoration process through wide analysis based on various data related with six main infrastructure facilities(dam, slope, bank, and etc) damage around waterside. The best recovery resource could be inferred from the resource allocation module based on the result of recovery evaluation. So, this disaster recovery decision support system offers the appropriate information from both main factors to administrator handling or controlling emergency catastrophe situations.

We developed the Parameter-elevation Regressions on Independent Slopes Model(PRISM)-based Dynamical downscaling Error correction(PRIDE)-Wind speed(WS) model version 3.0 to produce highresolution( 1km) grid data at a monthly time scale by using observation and Regional Climate Model(RCM) wind speed data. We consequently produced monthly wind speed grid data during the observation period(2000~2014) and the future period(2021~2100) for Representative Concentration Pathway(RCP) 2 type scenarios by using the PRIDE-WS model. The PRIDE-WS model is constructed by combining the MK(Modified Korean)-PRISM-Wind, the RCM anomaly and Cumulative Density Function(CDF) fitting, basically based on Kim et al.(2016)’s algorithm applied for daily precipitation. The upper level wind(80m altitude) was estimated by Deacon equation using surface wind speed that was produced by the PRIDE-WS model. The results show that the wind speed at the upper level generally increased during the summer season while it decreased during the spring, autumn and winter seasons.

Bakanae (foolish seedling) disease caused by Gibberella fujikuroi creates serious problems in the foremost rice growing countries. This study was conducted to identify new resistance genetic sources to Bakanae disease. Bioassay showed that 11 varieties including Gwangmyeongbyeo, Hawn, Wonseadaesoo, Erguailai etc. were resistant to bakanae disease among 254 rice germplasm. Mismatch ratio between phenotype on bakanae disease bioassay and allele type of RM9, a SSR marker closely linked the bakanae disease resistant QTL, qBK1, were 38.3%. These results suggest that RM9 might be used for selecting qBK1, but it cannot be used for wide range of rice germplasm. Resistant germplasm in this study might be have resistant genes different from qBK1. The eleven varieties resistant to selected in this study will be used to identify new resistant alleles or genes to improve bakanae disease resistance in rice.

This study aims to analyze region-specific trends in changing greenhouse gas emissions in incineration plants of local government where waste heat generated during incineration are reused for the recent five years (2009 to 2013). The greenhouse gas generated from the incineration plants is largely CO2 with a small amount of CH4 and N2O. Most of the incineration plants operated by local government produce steam with waste heat generated from incineration to produce electricity or reuse it for hot water/heating and resident convenience. And steam in some industrial complexes is supplied to companies who require it for obtaining resources for local government or incineration plants. All incineration plants, research targets of this study, are using LNG or diesel fuel as auxiliary fuel for incinerating wastes and some of the facilities are using LFG(Landfill Gas). The calculation of greenhouse gas generated during waste incineration was according to the Local Government's Greenhouse Emissions Calculation Guideline. As a result of calculation, the total amount of greenhouse gas released from all incineration plants for five years was about 3,174,000 tCO2eq. To look at it by year, the biggest amount was about 877,000 tCO2eq in 2013. To look at it by region, Gyeonggido showed the biggest amount (about 163,000 tCO2eq annually) and the greenhouse gas emissions per capita was the highest in Ulsan Metropolitan City(about 154 kCO2eq annually). As a result of greenhouse gas emissions calculation, some incineration plants showed more emissions by heat recovery than by incineration, which rather reduced the total amount of greenhouse gas emissions. For more accurate calculation of greenhouse gas emissions in the future, input data management system needs to be improved.

To develop various usable water from coal seam gas (CSG) water that needs to be pumped out from coal seams for methane gas production, a feasibility study was carried out, evaluating and analysing a recent report (Coal Seam Gas Water Management Policy 2012) from Queensland State Government in Australia to suggest potential CSG water treatment options for fit-for-purpose usable water production. As CSG water contains intrinsically high salinity-driven total dissolved solid (TDS), bicarbonate, aliphatic carbon, Ca+2, Mg+2 and so on, it was found that appropriate treatment technologies are required to reduce the hardness below 60 mg/L as CaCO3 by setting the reduction rates of Ca+2, Mg+2 and Na+ concentrations, as well as TDS reduction. Also, Along with fiber filtration and membrane separation, an oxidation degradation process was found to be required. Along with salinity reduction, as CSG water contains organic compounds (TOC: 248 mg/L, C6 -C9: <20 mg/L and C10 - C36: <60 mg/L), compounds with relatively high molecular weights (C10 - C36) need to be treated first. Therefore, this study suggests a combined system design with filtration (Reverse osmosis) and oxidation reduction (electrolysis) technologies, offering proper operating conditions to produce fit-for-purpose usable water from CSG water.

Miscanthus has been considered as the most promising bioenergy crop for lignocellulosic biomass production. In Korea, M. sacchariflorus and M. sinensis can be found easily in all regions. It is a great advantage to utilize as important species with respect to genetic and cross-breeding programs materials for creation of novel hybrids. For successful breeding programs, it is important to precisely understand the variability of flowering traits among Miscanthus species as breeding parents materials. In this study, flowering traits were observed daily in 960 germplasms of two Miscanthus species (M. sacchariflorus and M. sinensis) for growing seasons over 2 years. The flowering process was divided into three stages. ST (sprouting time) was recorded when first leaf of the plant emerged on soil. FS1 (flowering stage 1) and FS2 (flowering stage 2) were recorded when flag leaf was firstly observed, and 1 cm of panicle was showing on at least one stem, respectively. For 2013 and 2014, the latest germplasms exerted flag leaf, i.e. September 30 (DOY of FS1 164.1) and September 4 (DOY of FS1 141.0) occurred M. sacchariflorus cv. Geodae 1 and M. sacchariflorus cv. Uram collected from Southern Korea (Jeollanam-do), while Miscanthus germplasms collected from northern Korea (Gyeonggi-do) which emerged the earliest flag leaf in July and August, significantly decreased DOY. For DOY from ST to FS2, M. sacchriflorus germplasms ranged from 140 to 190 days, and 110 to 170 days for 2013 and 2014. The highest frequency showed to 160 days for 2013, and 150 days for 2014. In M. sinensis germplasms, the highest frequency showed to 180 days for 2013, and 170 days for 2014. In the results of correlation between the day of years from ST to FS2 for 2013 and 2014, M. sacchriflorus and M. sinensis showed high coefficient of correlation (0.70 and 0.89). It can be supposed that flowering characteristics of Miscanthus are largely affected by the unique phenotypic characteristic of native habitat than environmental factors of the current planted site. This study for flowering traits of Miscanthus may provides an important information in order to expedite the introduction as breeding materials for creation of new hybrid.

Thirty-eight Pea (Pisum sativum L.) genotypes were screened to identify varieties to be suitable for sprout. Based on seed yield and sprout qualities such as whole length and sprout yield, five genotypes (PI269803, PI343278, PI343283, PI343300 and PI 343307) were primarily selected as candidates for pea sprouts. In order to determine optimal cultivation condition for pea sprouting, growth characteristics were investigated according to the change of germination temperature and days for sprouting. Whole length and hypocotyl length were observed to increase as a time dependent manner at each tested temperature (20, 23, and 25°C). However, whole length, hypocotyl length, and sprout yield were highly increased at 23°C compared to 20 and 25°C. Especially, PI269803 and PI343300 showed higher sprout yield than the others. In addition, the effect of the change of germination temperature on antioxidant properties was estimated by measuring total phenolic content (TPC) and free radical scavenging activity (DPPH and ABST activity). TPC and DPPH/ABST activities of PI269803 and PI343300 were higher at 23°C than at 20 and 25°C, while antioxidant properties of PI343278 and PI343283 were decreased in a temperaturedependent manner. The results show a high degree of correlation between TPC and antioxidant activities and suggest that the temperature change for pea sprouting could be responsible for antioxidant properties. Taken together, these results provide optimal cultivation conditions for pea sprouting and suggest that PI269803 and PI343300 with high sprout yield and antioxidant properties could be used for pea sprouts.