곁뿌림 산지초지의 조성, 수량, 식생 및 목초품질 등에 미치는 3요소(:0-0-0; 0-10-10; 6-15-15; 12-20-20; 24-25-20 kg/l0a/year)와 소석회 (0, 250kg/10a; 조성시만 시용)의 시용효과를 구명하는 10년간 시험후, 별도로 사심별 토괴의 화학성 등을 조사하였으며, 본보에서는 치환성 체기간 다양한 상호비율 및 사괴 보존성의 가시적 변화를 검토하였다. 1. 사괴비옥도 특성 및 grass tetany 임계수준과

저밀도 에너지를 효율적으로 축열하기 위해서 현열축열재보다는 상변화 온도 30℃ 수준의 잠열축열재를 이용하는 것이 효과적이다. 이를 위하여 연구를 수행한 결과, SCD에 APS를 0.0~5.0wt% 첨가하여 과냉도를 25.0℃에서 1.5℃ 이하로 조절하였으며, APS의 적정 함량은 3.0wt%였다. SCD에 PSC를 0.0~3.0wt% 첨가하여 상분리량을 70.0%에서 0.0%로 조절하였으며, PSC의 적정 함량은 1.5wt%였다. 축열재 내구성 검증을 위하여 0~1,500회의 상변화 사이클을 수행한 결과 상변화 온도의 변화량이 30±l.0℃ 이하, 잠열량 변화가 54±2.0 Kcal .kg-1 이하로 안정된 값을 보였다. 따라서 축열재의 수명은 10년 정도 보장될 수 있는 것으로 판단되었다

The W-Cu composite powders were synthesized from W and Cu elemental powders by ball-milling process, and their microstructural changes and sintering behaviors were evaluated. The ball milling process was carried out in a 3-dimensional mixer (Turbula mixer) using zirconic () ball and alumina () vial up to 300 hrs. The ball-milled W-Cu powders revealed nearly spherical shape. Microstructure of the composite powders showed onion-like structure which consists of W and Cu shells due to the moving characteristic of Turbula mixer. The W and Cu elements in the composite powders milled for 300 hrs were homogeneously distributed, and W grain size in the ball-milled powder was smaller than 0.5 . Fe impurity introduced during ball milling process was very low as of 0.001 wt%. The relative sintered density of ball-milled W-Cu specimens reached about 94% after sintering at .

플라즈마 용사법을이용하여 AISI 316 스테인레스 금속모재에 0.1mm 두께의 NiCrAlCoY2O3금속 결합층과 0.3mm 두께의 ZrO2(8wt%Y2O3) 세라믹층으로 구성된 이층 단열코팅층을 제조하였다. 코팅층의 미세조직, 금속결합층의 산화를 고찰하였으며, 900˚C에서 등은 시험과 열반복시험 후, 접합강도시험을 통하여 코팅층의 단사정 상은 열처리시간이 길어질수록 약간 증가하였다. 또한 비변태성 t'의 c/a는 용사상태에서 1.0099이였으며, 100시간 열처리 후에는 1.0115로 약간 증가하였다. 그리고 용사층의 접합강도는 열처리 시간이 길어질수록 감소하였다. 등온열처리 후에는 1.0115로 약간 증가하였다. 그리고 용사층 의 접합강도는 열처리 시간이 길어질수록 감소하였다. 등온열처리 후, 파괴는 주로 세라믹층에서 일어났으며, 반복 열처리되 시편에서는 10회 이후 대부분 금속결합층/세라믹층의 계면에서 일어났다.

흰쥐의 체중은 실험기간 동안 증가하였으며, 식이별로는 대조군이 가장 높은 체중 증가를 보였다. 콜레스테롤의 첨가는 흰쥐의 정상적인 성장을 억제하였으며, 콜레스테롤 첨가군에서는 콜레스터롤 대조군의 체중증가량이 유의하게 가장 낮았다. Rutin과 메밀채소를 식이에 첨가하였을 때 흰쥐의 콜레스테롤에 의한 성장억제 작용을 효과적으로 감소시키는 것으로 나타났으며, 첨가량의 증가에 따라 헐청에 총콜레스테롤 함량과 과산화지질 함량은 낮아진 반면에 HDL-cholesterol 함량은 높아지는 경향을 보였다. 고콜레스테롤 식이를 급여시킨 흰쥐의 장기에서는 칼슘침착이 나타나는 병리조직학적 변화를 보였으며, 메밀채소 섭취에 의하여 칼슘침착의 정도는 완화되었다.

수산용 항균제로 널리 사용되고 있는 옥소린산의 잔류량을 전북지역에서 시판중인 뱀장어 근육조직에서 측정하였다. 후배부 근육중의 옥소린산 잔류량은 시료에 따라 많은 차이가 있었으며 2%의 시료에서는 검출되지 않았다. 옥소린산이 검출된 시료중 16%에서는 그 농도가 0.1 ppm 이상이었다. 중요 장기중의 옥소린산 농도는 신장>간장>혈장>근육의 순이었다. 근육중의 옥소린산은 10분 가열에 의해 거의 감소되지 않았으며 30분 가열에 의해서는 원래 농도의 50% 수준으로 감소하였으나 30분 가열 후의 시료는 심하게 탄화되었다. 고용량의 옥소린산을 실험실적으로 뱀장어에 투여하여 얻은 근육중의 농도나 수용액중의 옥소린산이 가열에 의해 파괴되는 경향을 검토함으로써 옥소린산의 열안정성이 확인되었다. 이 연구 결과는 뱀장어 소비자를 옥소린산 섭취로부터 보호할 수 있는 규제의 강화가 필요함을 시사한다.

Distribution structure is the link between a society's needs and its industrial responses. A change in distribution structure brings about a consumption structure which may results in considerable changes in lifestyle including food habits. The purpose of this study was to evaluate a effect of change of distribution structure on the food purchase. The survey was carried from May to June, 1997 by way of questionnaire of 407 housewives, aged 23-64 years, in Seoul and the capital area. The questionaire consists of sociodemographic characteristics of the subjects and distribution channel, information route of food selection, acknowledgement and coefficient of utilization of new distribution channel, mainly used distribution channel in food purchase, important factors in food selection, and food purchasing behavior. Their data were statistically analyzed based on frequency, mean, and 2-test. The major findings of this study were as follows; 1) Most frequently used distribution channels in food purchase were supermarket(38.53%), department store(15.23%), discount store(14.05%), a conventional retail market(13.87%), membership wholesale club(8.07%), and a conventional wholesale market(6.53%). 2) The new distribution channels that subjects have ever used were discount store(75.4% of the subject), membership wholesale club(63%), mail order house(32%), outlet store(29.4%), home shopping(10.3%). 3) Compared to the subject living far from the new distribution channel, the subject living close to the new distribution channel was higher in frequency of new distribution channel utilization. These observations suggest that change of the distribution structure promotes the change of the food purchasing behavior.

The effect of Mn on the densification and the microstructural change in W heavy alley was investigated with adopting the improved Mn-adding method. In order to avoid the pore formation problems associated with Mn powder mixing to the other constituent powders, Mn was added afterwards to the sintered heavy alloy; Mn powder was spread homogeneously on the surface of the sintered heavy alloy compact, and this Mn powder contained specimen was resintered at the same sintering temperature. As expected, the resintered specimen showed the pore free microstructure because Mn was reduced separately from the other constituent elements. It was also founded that W grains grew rapidly at the initial stage of resintering treatment due to the activated reprecipitation of the excess W atoms substituted by Mn atoms, but the growth rate of W grains was slowly lowered with the prolonged sintering time, especially, compared to the Mn free heavy alloy. Such a retardation of grain growth should be attributed to the decreased W solubility in the Mn contented matrix phase. Furthermore, Mn addition resulted in the decrease of contiguity by improving the wetting between matrix phase and W grain.

The objective of this study was to identify pulmonary functional variations in relation to postural changes, lapse after changing position, and the use of abdominal band in the cervical cord injured. The subjects of this study were 19 quadriplegic patients who had been admitted to the department of the Rehabilitation Hospital, College of Medicine, Yousei University, from April, 1997 through May 3, 1997. A spiroanalyzer was used to measure pulmonary function in supine, standing, time after changing position, and recording to the position, application method, and tightness of the abdominal band. The data were analyzed by the repeated measure one-way ANOVA, and Wilcoxon signed rank test. The findings were as follows: 1. All phase of the patients' pulmonary function improved significantly in supine posture in contrast to standing (vital capacity by and expiratory reserve volume by ). 2. The longer the time lapsed from supine posture to standing, the patient's expiratory reserve volume, maximum ventilation volume, vital capacity, and forced expiratory volume increased. 3. When the patient lay in supine position, the maximum ventilation volume, vital capacity, and the forced vital capacity increased then the center line of the abdominal band was placed along iliac crest; on the other hand, when the patient was standing, placing the bottom line of the abdominal band along iliac crest increased the maximum ventilation volume, vital capacity, and forced expiratory volume. 4. In placing the abdominal band in the patients, leaving space between the top and bottom lines of the band helped increased in maximum ventilation volume, vital capacity, and forced vital capacity for patient in supine as well as in standing. 5. When placing the abdominal band to patients in supine posture, reducing the length of the band by 2.5% along the patient's waist line increased the patients' vital capacity, while reducing the length by 10% to patients in standing increased the maximum ventilation volume. The abdominal band should be placed in such a way that the bottom part of the band should be more tightly fastened while leaving enough room for a hand to be placed in between the body and the band for the top part of the hand. It should also be noted that in a supine position, the bottom line of the band should be placed along the iliac crest, while in standing, the center line should be placed along the iliac crest. The length of the band should also be reduced by 2.5% of the waist line in supine position, and in standing, the length should be reduced by 10%. It should also be noted that the pulmonary function of the patients should be measured at least 10 minutes after one position change.

냉축열 잠열재로 Na2SO4.10H2O를 선정하여 냉축열을 위한 잠열축열 온도 수준을 NH4Cl과 KCI을 잠열온도 조절제로 활용하여 16℃에서 -0.3℃까지 조절하였으며, 상변화 사이클에 의한 열특성 변화 추이와 물성의 안정성을 실험 분석하여 다음과 같은 결과를 얻을 수 있었다. 1. 냉축열재로 선택한 Na2SO4.10H2O는 물성이 불안정한 상변화 잠열 재였으나, 조핵제로 BRX를, 증점제로 CBP를 첨가하여 물성을 안정시켰으며, NH4Cl과 KCl을 상변화 온도조절제로 선택하여 상변화 온도를 조절할 수 있다. 2. SSD＋NH4Cl서 NH4Cl을 g~21wt%로 증가시킴에 따라 상변화 온도는 16~-0.3℃로 조절할 수 있었으며, 잠열축열량은 30kca1/kg에서 23.4kca1/kg으로 감소하였고, 상변화 온도조절제, KCl을 l7wt%에서 25wt%로 증가시킴에 따라 상변화 온도를 14℃에서 4℃까지 조절할 수 있었다.