검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 1,946

        301.
        2016.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        It is important to select proper ground motions for obtaining accurate results from response history analyses. The purpose of this study is to propose an accurate and efficient method that does not require excessive computation for selecting and scaling ground motions to match target response spectrum mean and variance. The proposed method is conceptually simple and straightforward, and it does not use a simulation algorithm that requires a sophisticated subroutine program. In this method, the desired number of ground motions are sequentially scaled and selected from a ground motion library. The proposed method gives the best selection results using Sum of Square Error and has the smallest value(=0.14). Also, The accuracy and consistency of the proposed method are verified by comparing the selection results of the proposed method with those of existing methods.
        4,000원
        302.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문은 확장된 프로젝션 기법을 사용한 위상 최적설계 방법을 다루고 있다. 다양한 형상과 길이 스케일을 가지는 프로 젝션 함수를 개발해 위상 최적설계 기법에 적용시킴으로써, 복합재료의 설계에서 형상 및 크기가 미리 주어진 보강재의 최 적 배치를 위상 최적설계를 통해 결정할 수 있음을 확인하였다. 또한 이와 같은 프로젝션 기법이 균질화법과 결합되어 체적 탄성률 또는 전단탄성률 등의 유효 재료특성을 최대화시키는 단위 구조를 설계함으로써, 주기 구조를 가지는 복합재료에서 보강재의 최적 배치를 결정하고 그 유효 재료특성값을 수치적으로 계산할 수 있음을 여러 수치 예제들을 통해서 검증하였다.
        4,000원
        303.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문은 확장된 프로젝션 기법을 사용한 위상 최적설계 방법을 다루고 있다. 다양한 형상과 길이 스케일을 가지는 프로젝션 함수를 개발해 위상 최적설계 기법에 적용시킴으로써, 복합재료의 설계에서 형상 및 크기가 미리 주어진 보강재의 최적 배치를 위상 최적설계를 통해 결정할 수 있음을 확인하였다. 또한 이와 같은 프로젝션 기법이 균질화법과 결합되어 체적탄성률 또는 전단탄성률 등의 유효 재료특성을 최대화시키는 단위 구조를 설계함으로써, 주기 구조를 가지는 복합재료에서 보강재의 최적 배치를 결정하고 그 유효 재료특성값을 수치적으로 계산할 수 있음을 여러 수치 예제들을 통해서 검증하였다.
        4,000원
        304.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는, 전기방사를 위하여 알지네이트와 키토산을 이용하여 알지네이트/poly(ethylene oxide)(PEO)와 키 토산/PEO 용액을 준비하였다. 준비된 용액을 10 mL 플라스틱 주사기에 넣고 금속 노즐에 높은 전압을 공급하였다. 키토산과 알지네이트 용액은 고분자 농도, 온도, 상대습도, 인가전압, 노즐과의 거리, 그리고 용액 속도에 의해 컨트롤되었다. 제조된 나노섬유막은 전자주사현미경을 이용하여 모폴로지를 관찰하였다. 알지네이트 전기방사를 위한 나노 섬유막의 최적화된 조건 은 2 wt% 알지네이트, 2 wt% PEO, 60°C, 노즐과의 거리 15 cm, 20~24 kV, 8 μm/min이었으며, 키토산 섬유막의 최적화 조 건은 2 wt% 키토산, 2 wt% PEO, 25°C, 노즐과의 거리 15 cm, 24 kV, 8 μm/min이었다. 복합 나노섬유 제조조건은 노즐과의 거리 20 cm, 8 μm/min, 26 kV이었다.
        4,000원
        305.
        2016.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Flower-like nickel oxide (NiO) catalysts were coated on NiCrAl alloy foam using a hydrothermal method. The structural, morphological, and chemical bonding properties of the NiO catalysts coated on the NiCrAl alloy foam were investigated by field-emission scanning electron microscopy, scanning electron microscopy-energy dispersive spectroscopy, Xray diffraction, and X-ray photoelectron spectroscopy, respectively. To obtain flower-like morphology of NiO catalysts on the NiCrAl alloy foam, we prepared three different levels of pH of the hydrothermal solution: pH-7.0, pH-10.0, and pH-11.5. The NiO morphology of the pH-7.0 and pH-10.0 samples exhibited a large size plate owing to the slow reaction of the hydroxide (OH−) and nickel ions (Ni+) in lower pH than pH-11.5. Flower-like NiO catalysts (~4.7 μm-6.6 μm) were formed owing to the fast reaction of OH− and Ni2+ by increased OH− concentration at high pH. Thus, the flower-like morphology of NiO catalysts on NiCrAl alloy foam depends strongly on the pH of the hydrothermal solution.
        4,000원
        306.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 철골모멘트골조의 보-힌지 붕괴모드를 유도하는 최적 내진설계기법을 제안한다. 이는 유전자알고리즘을 사용하며, 기둥의 소성힌지 발생을 억제하는 제약조건을 설정하여 보-힌지 붕괴모드를 유도한다. 제안하는 기법은 구조물량를 최소화하고 에너지소산능력을 최대화하는 목적함수를 사용한다. 제안하는 기법은 9층 철골모멘트골조 예제 적용을 통해 검증한다. 예제 적용을 통해 철골모멘트골조의 보-힌지 붕괴모드를 유도하기 위해 요구되는 기둥-보 강도비를 평가한다. 패널존에 대한 3가지 모델링 기법을 각각 적용하여 모델링 조건에 따른 휨강도비 영향이 추가적으로 검토된다.
        4,000원
        307.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 재료비선형 문제를 다루기 위한 비선형 MLS 차분법의 정식화 과정을 제시한다. MLS 차분법은 절점모델을 기반으로 고속 미분근사식을 활용하여 지배 미분방정식을 직접 이산화 하는데, 변수를 변위로 일원화한 Navier 방정식을 사용하여 탄성재료 문제를 다룬 기존의 MLS 차분법은 재료의 구성방정식을 별도로 고려할 수 없다. 본 연구에서는 비선형 재료의 구성방정식을 반영할 수 있는 강정식화를 위해 1차 미분근사를 반복 사용하는 겹미분근사를 고안했다. 응력의 발산으로 표현되는 평형방정식을 그대로 이산화하고 Newton 방법을 적용하여 반복계산을 통해 수렴해를 찾는 비선형 알고리즘을 제시했다. 응력 계산과 내부변수의 갱신은 return mapping 알고리즘을 활용하였고, 알고리즘 접선계수(algorithmic tangent modulus)의 적용을 통해 빠르고 안정적인 반복계산이 가능하도록 하였다. 재생성 시험을 통해 겹미분근사의 정당성을 검증했고, 비선형재료에 대한 인장문제의 해석을 통해 개발된 비선형 MLS 차분 알고리즘의 정확성과 안정성을 확인하였다.
        4,000원
        308.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Damages of large embankment dams by recent strong earthquakes in the world highlight the importance of seismic security of dams. Some of recent dam construction projects for water storage and hydropower are located in highly seismic zone, hence the seismic performance evaluation is an important issue. While state-of-the-art numerical analysis technology is generally utilized in practice for seismic performance evaluation of large dams, physical modeling is also carried out where new construction technology is involved or numerical analysis technology cannot simulate the behavior appropriately. Geotechnical centrifuge modeling is widely adopted in earthquake engineering to simulate the seismic behavior of large earth structures, but sometimes it can’t be applied for large embankment dams due to various limitations. This study proposes a dynamic centrifuge testing method for large embankment dams and evaluated its applicability. Scaling relations for a case which model scale and g-level are different could be derived considering the stress conditions and predominant period of the structure, which is equivalent to previously suggested scaling relations. The scaling principles and testing method could be verified by modified modeling of models using a model at different acceleration levels. Finally, its applicability was examined by centrifuge tests for an embankment dam in Korea.
        4,000원
        309.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        There can be included a variety of uncertainties in all measurement results whether we can perceive or not on the causes. These uncertainties may end up in lowering the reliability of measurement results and also deteriorate the level of quality. For the purpose, we tried to combine the strengths of measurement uncertainty and measurement system analysis together to present a practical flowchart so as to verify those potential variation factors in general measurement processes. As a case study, we did an experiment and gathered data on the length between two holes of an engine cylinder head which is a core part for vehicles with a coordinate measuring machine and estimated nine uncertainty factors of it. Consequently, it was identified that the four primary factors among the nine which were related to the measurement standard, random errors or spread of the repeat measurements, differences between the coefficients of thermal expansion and the environment especially had been the influence around the laboratory. Since it is impossible to analyze the equipment and appraisal variations respectively through the only measurement uncertainty, we have used the measurement system analysis following the flowchart. Showing the result of being just about 0.5 % lower for the appraisal variation, and the equipment variation occupied about 7% for the total Gage R&R. Through this research, we have come to a conclusion that much more detail analysis on variation factors can be possible to be identified in measurement processes by using the developed flowchart which is composed of measurement uncertainty and measurement system analysis. Therefore, we expect engineers who are involved in quality and measurements to utilize this developed method.
        4,000원
        310.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The objective of this study is to improve safe execution of the management plan in Construction Technology Promotion Act. This research addresses the issue how to prevent the collapse of facilities under construction and after completion, improve the examination system, and execute Improvement of Safety Management Plan. To achieve this goal, research providing insights into understanding the ways in which creating and presenting safety checks and deploying safety training measures effectively is imperative.
        4,000원
        311.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to estimate the economic value of boat fishing experience marine tourism activity in Jeju Island’s Chagwido. The economic value is estimated as consumer surplus using count data models including the truncated Poisson model and the truncated negative binominal distribution model. This study collects the effective 504 questionnaires from boat fishing experience tourists in Jeju Island’s Chagwido. The truncated negative binominal distribution model was statistically more suitable and valid than other models. The truncated negative binominal distribution model was applied to estimate consumer surplus as economic value from boat fishing experience tourism activity in Jeju Island’s Chagwido. A consumer surplus value per trip was estimated as about 209,900 won. The annual economic value from boat fishing experience tourism activity was estimated as 273,700 won in Jeju Island’s Chagwido. Consequently, boat fishing experience marine tourism activity has a very large economic value in Jeju Island.
        4,000원
        312.
        2016.05 구독 인증기관·개인회원 무료
        현재까지 상당한 기술적인 진보가 있어왔지만, 연구개발의 커다란 기술적 어려움으로 꼽히는 것은 오염물질의 비가역적인 흡착에 의한 분리막 오염과 이로 인한 시스템 성능 저하이다. 이러한 문제점을 해결하기 위한 방안으로 redox 반 응을 이용한 표면개질을 통해 분리막의 표면을 산화/환원 반응을 통해 개질하는 것으로서, 고분자 분리막의 탄소를 바탕으로 음이온 및 양이온을 가진 작용 기를 순차적으로 중합하여 오염물질과 분리막의 전기적 반발력을 향상시켜 분리막의 표면 오염을 저감하는 것이다. 본 연구에서는 양이온, 음이온성 오염물 질을 동시에 제거할 수 있는 표면개질 방법을 개발하고자 redox 반응을 이용한 접목중합을 통해 고분자 분리막의 표면을 개질하는 연구를 수행하였다.
        313.
        2016.05 구독 인증기관·개인회원 무료
        최근 원전해체, 원전사고 등으로 인한 수계 내 방사성물질 제거 기술로 고분자 소재의 분리막이 사용되고 있지만 고에너지 광선으로 막의 변형 및 파손이 중요한 문제점 중 하나이다. 무기계열의 세라믹막은 강한 내구성을 지니며, 기 존의 한외여과막 수준의 표면 공극 크기를 나노여과막 수준으로 개질할 경우 방사선 물질 제거에 효과적이다. 본 연구에서는 알루미나-지르코니아 나노물질 을 여과코팅 방법으로 세라믹막 표면을 나노여과막 수준으로 개질을 하였고, SEM-EDX, 분획분자량, 오염 전 투수량을 통해 막의 특성 변화를 확인하였다. 제조된 세라믹 나노여과막의 방사선물질 제거 평가로 우라늄(Uranyl nitrate hexahydrate) 2 mg/L 수용액을 사용하였고, ICP-MS 분석결과 40% 제거율을 확인하였다.
        314.
        2016.05 구독 인증기관·개인회원 무료
        We report on a new fabrication method of polyamide thin film composite RO membranes, so called support-free interfacial polymerization (SFIP). In SFIP method, the PA layer is first formed at the interface without a porous support, and then adhered onto a support unlike conventional IP where the PA layer is in-situ formed directly on a support. We control the surface chemistry of a PAN support by adjusting hydrolysis to maximize adhesion of the PA layer with the support. The SFIP-assembled membrane showed higher performance and unique surface morphology compared to conventional IP-assembled one. It allows facile characterization of the PA layer and PA-support interface together with well-defining each component. Therefore, SFIP provide an promising material platform for the fabrication of RO membranes and fundament study.
        315.
        2016.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In the first century, Sinographs and Chinese culture were transmitted to Japan, Korea and Vietnam, simultaneously had profound impact on countries they passed by, and then, formed the vast Sinographic Cosmopolis. During the contact with Sinographs and culture, the people of all three nations had created their writing systems that based on these elements of Sinographs. Based on script evidences recorded in Kokuji no Jiten, this article will analyze the characteristics and suggest the historical divergence of the Waji system (also called the Kokuji), conduct comparisons with the Vietnamese Nom script, develop the model of the structure of these scripts, and specifically point out the similarities and differences of these two writing systems.
        5,200원
        316.
        2016.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근에 요소망의 재구성이 불필요하고 균열의 가시화에 강점을 가지는 확장유한요소법(XFEM)을 이용한 균열 해석이 많이 연구되고 있지만 주로 단일재료로 이루어진 부재의 해석에 집중되어 있다. 본 논문에서는 복합재료 부재인 철근콘크리트보의 다중균열 해석에 확장유한요소법을 적용하며 그 적용성과 타당성을 살펴보았다. 확장유한요소해석 기능이 탑재된 상용해석프로그램인 ABAQUS를 사용하여 균열해석을 수행하였으며 그 결과를 실험결과와 비교하였다. 확장유한요소법에서 인접요소에 동시에 균열이 발생할 경우 균열의 불연속성이 나타나지 않은 부가자유도 잠김 현상을 발견하였고 이에 대한 원인과 그 해결방안을 제시하였다. 또한 실험결과와 유사한 다중균열 발생을 위한 모델링 기법도 제시하였다. 확장유한요소법을 이용한 해석결과는 실험결과와 유사한 균열 양상 및 균열 간격을 보여 주었으며 하중-변위 관계에 있어서도 실험에 근접한 결과를 보여 주었다.
        4,000원
        317.
        2016.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 Navier-Stokes solver에 기초한 TWOPM-3D와 자유수면을 효과적으로 추적할 수 있는 VOF법을 결합한 수치해석법으로 연안역의 육상 교량에 작용하는 고립파에 의한 지진해일파력을 수치적으로 검토하였으며, 연직벽체와 연직주상구조물에 작용하는 단파파력에 관한 기존의 실험치와 비교·검토하여 본 수치해석의 타당성을 검증하였다. 실제로 피해를 입은 교량에 대해 지진해일파고의 변화에 따른 파력의 특성을 수치실험을 통하여 조사하였으며, 육상 교량에 작용하는 지진해일파력의 추정에 항력 성분만을 고려한 Morison식으로부터 얻어진 항력계수의 결과와 설계기준과의 비교로부터 본 3차원 수치해석의 유용성을 논의하였다. 또한, 지진해일파력을 보다 고정도로 추정할 수 있는 합리적인 방법으로 항력과 관성력을 동시에 고려한 Morison식의 적용을 제안하였다.
        4,200원
        318.
        2016.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        선박 건조 시장의 요구를 맞추기 위하여 신속한 건조의 목표로 노력하고 있는 조선소가 선박 정도관리에 대한 요구가 갈수록 높아지고 있다. 선박 건조 공정에서 생산성의 향상과 생산 주기의 단축을 위하여 선박 부재의 정도평가를 전 주기에서 수행해야 하는 것은 중요하다. 선박의 품질을 높이기 위하여 조선소에서 블록의 정도제어를 수행하는 것은 선박의 건조 주기를 단축할 수 있을 뿐만 아니라 건조 비용도 줄일 수 있다. 선박 블록의 정도를 제어하는 중심은 선박 블록 통합 정도관리시스템을 만들어야 한다. 이 시스템은 “Non-allowance Shipbuilding”의 목표로 정도관리의 총괄성, 블록 정도의 향상, 정도관리 과정의 표준화 등이 이루어져야 한다. 일반적으로 정도관리를 수행하는 관리자가 광파측정기를 이용하여 선박 블록의 접합면에 있는 주요 포인트(vital point)를 측정하고 수집하지만 무거운 계측장비를 가지고 블록의 정도관리를 수행하는 것은 불편할 뿐만 아니라 시간도 오래 걸린다. 본 논문에서는 선박 블록의 정도관리 시간을 단축할 수 있는 포인트 클라우드 기반으로 3차원 레이저 스캐너를 이용한 선박 블록 탑재 전에 오차예측 방법을 제안하였다. 이 방법은 ICP(iterative closest point) 알고리즘으로 측정된 포인트 클라우드와 설계된 점들의 비교 작업을 수행한 다음에 허용범위 내의 오차를 만족하는 지를 판단한다.
        4,000원
        319.
        2016.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 양이온 불균질막을 제조하기 위해 PVDF matrix에 상용 양이온교환수지와 sulfonated poly(phenylene oxide)(SPPO)를 배합하여 제조, 이온 흡착 특성에 관하여 연구하였다. 연구결과 PVDF-IER 불균질막과 PVDF-SPPO 불균질 막 PVDF-SPPO-IER과 비교하였을 때 고분자 매트릭스의 비율이 30% 이하일 경우 이온교환용량, 전기저항에서 우수한 물성 을 가지고 있는 것을 확인할 수 있었다. 인장강도의 경우 PVDF resin의 약한 내구성에도 불구하고 상용화 불균질막과 비교하 여 최대 5배 이상의 강인한 모습을 보이고 있는 것으로 확인할 수 있었다. 따라서 화학적 특성과 기계적 특성을 고려했을 때 PVDF와 이온교환분말과 SPPO의 혼합 최적 비율은 30 : 70이며 이때의 전기저항은 3~5 Ω⋅cm2, 이온교환 용량은 0.6~1.0 meq/g으로 측정되었고 기계적 강도는 12~15 kgf/cm2으로 측정되었다.
        4,200원
        320.
        2016.04 구독 인증기관 무료, 개인회원 유료
        In the blast work inevitably exists a vacant space between drilling hole wall and explosive. So it cause an blast inefficiency called on a decoupling effect. In this study, For enhancing the detonation efficiency and reducing the environmental problem(vibration, noise, etc.), water is used to fill the vacant space. Water filling has many advantages such as efficiency, low price and workability. In the comparison analysis the field test is carried out. It result on an aspect of the effectiveness and safety. The result measured in the field is as follows; First, the water tube blast reduces the vibration by 16.5% and lessen the noise by 1% comparing to general blast. Secondly, water tube blast makes a separation distance shortened by maximum 15m. Thirdly, in the case that the same quantities of explosive are used, the amount of crushing per hole increased by about 12.8% in water blast method. The quantity of the explosive is reduced by about 11.4% comparing with general blast.
        4,000원