In this study, we introduce a novel TiN/Ag embedded TiO2/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (Vo). The current-voltage (I-V ) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

Ni-CNT nanocomposites were synthesized via the electrical explosion of wire (EEW) in acetone and deionized (DI) water liquid conditions with different CNT compositions. The change in the shape and properties of the Ni-CNT nanopowders were determined based on the type of fluids and CNT compositions. In every case, the Ni nanopowder had a spherical shape and the CNT powder had a tube shape. However, the Ni-CNT nanopowders obtained in DI water exhibited irregular shapes due to the oxidation of Ni. Phase analysis also revealed the existence of nickel oxide when using DI water, as well as some unknown peaks with acetone, which may form due to the metastable phase of Ni. Magnetic properties were investigated using a Vibrating Sample Magnetometer (VSM) for all cases. Nanopowders prepared in DI water conditions had better magnetic properties than those in acetone, as evidenced by the simultaneous formation of super paramagnetic NiO peaks and ferromagnetic Ni peaks. The DI water (Ni:CNT = 1:0.3) sample revealed better magnetic results than the DI water (Ni-CNT = 1:0.5) because it had less CNT contents.

코로나바이러스감영증-19 사태가 전세계를 강타하면서, 우리는 기존과 다르게 변해가는 일상 에 적응하는 뉴노멀 시대를 맞이 하였다. 코로나19 이후, 방송, 강의분야 등 문화예술계에도 비대면 문화가 급속도로 확산되고, 방송업계는 랜선방청제도를 도입하여 화상시스템을 통한 온 라인 실시간 방청을 제공하여 관객의 참여를 유도하고 있으며, 강의행사 분야도 화상회의 시 스템을 활용한 진행과 유튜브 플랫폼을 활용한 실시간 송출의 비대면 형태로 진행되고 있다. 이러한 비대면 참여환경은 물리적 스테이지의 한계, 음향 촬영 구도의 아쉬움, 현장감, 생동감 등 몰입적 측면에서의 한계가 존재하고, 언택트 방송 및 공연의 경우 음향과 촬영구도가 아쉬 운 부분으로 꼽히며 현장과의 괴리감, 집중하고 싶은 장면을 선택하여 볼수 없다는 한계도 지 닌다. 비대면 강의 경우에도 일상에서 쉼 없이 이어지는 비대면 참여 환경에 ZOOM Fatigue 라는 신조어가 등장할 만큼 비대면 환경에서의 집중력과 흥미를 잃어가는 현상이 나타나고 있 다. 이처럼 코로나19로 인한 변화가 일상화되면서 인류의 역사는 코로나19 (BC, Before Corona), (AC, After Corona) 나뉠 것이라는 예측이 일기도 한다. 무엇보다 코로나19로 인 해 인류의 정치, 경제, 사회, 문화, 교육등 모든 영역이 대변화를 맞은 가운데 가장 큰 변화는 물리적 접촉이 최소화되면서 Untact문화가 확산됐다는 점이다.

문화유산은 조상들의 문화중에서 후손들에게 물려줄 만한 가치가 있는 것을 말한다.[1] 우리의 문화유산을 우리의 역사, 정체성, 그리고 자부심을 담고 있으며, 이를 통해 우리는 과거의 삶 과 지식, 그리고 경험을 재조명하고 이해할 수 있다. 우리의 문화유산을 보전하고 전파하는 것 은 매우 중요하다. 이를 위해 우리는 문화콘텐츠와 IT기술의 융합적인 미디어아트를 활용하여 이를 알리고자 한다. 이러한 미디어 아트는 국내외 관광객들에게 우리의 문화유산을 소개하는 데 더욱 효과적이다. 전남의 3대 별서정원은 이러한 문화유산 전파의 중요한 장소로서, 다양한 콘텐츠를 통해 우리의 문화유산을 소개하고 있다. 이를 다중디스플레이를 활용한 문화관광 콘 텐츠로 더욱 널리 알리고 우리문화의 보존과 계승에 크게 기여한다.

This study investigated student engagement by conceptualizing learning engagement and examining the inner mechanism that operates in the university English learning context. This study administered a questionnaire to 376 college students, and data analysis was conducted with SPSS 26.0 and AMOS 24.0. The findings revealed that student engagement can be conceptualized into behavioral, cognitive, affective, and interactive engagement. The results confirmed that cognitive engagement positively affected behavioral engagement, whereas affective engagement did not. Affective engagement had positive effects on both cognitive engagement and interactive engagement. Interactive engagement positively affected cognitive engagement but did not affect behavioral engagement. Further, the results showed that cognitive engagement acted as a full mediator between affective engagement and behavioral engagement, as well as between interactional engagement and behavioral engagement. The findings of this study propose implications for optimizing English teaching to facilitate student engagement and ultimately enhancing their learning satisfaction along with improving academic outcomes.

Safe radiation management is essential not only for operational nuclear power plants but also for nuclear plants to be decommissioned. When spent nuclear fuel is present on-site, meticulous radiation emergency plans are necessary to ensure safety. In Korea, numerous radiation emergency plans have been established for operational nuclear reactors. These plans delineate distinct response mitigation measures for white, blue, and red emergencies. However, clear regulations are yet to be devised for radiation emergency plans for reactors to be decommission. Therefore, this study investigated the decommissioning plan and status of Kori unit 1 to comprehensively analyze the current status of decommissioning safety in Korea. In this study, radiation emergency plans of decommissioning nuclear power plants abroad were reviewed to confirm radiation emergency action levels. Furthermore, radioactive waste treatment facilities, to be used for decommissioning reactors in Korea were evaluated. Moreover, the study assessed emergency plans (especially, emergency initiating conditions) for operational nuclear power plants in Korea for potential use in the decommissioning phase. This study proposed an emergency initiating condition that can be used for decommissioning reactors in Korea. Considering the anticipated introduction of plasma torch melting facility in Korea, this study examined the conditions of radiation emergency plans can be altered. This study identified effective measures and guidelines for managing radiological emergency initiating conditions, and effective decommissioning of nuclear power plants in Korea.

최근에 생성형 인공지능 활용에 관한 많은 연구가 진행되고 있다. Generative AI 도구와 플랫 폼 수량이 증가하고 있는 추세에 따라, Generative AI 도구는 텍스트와 이미지, 소리, 비디오, 그리고 3D 모델을 생성하는 기능을 가지고 있을 뿐만 아니라 프롬프트만으로도 아이디어와 콘텐츠를 포함하여 복잡한 작품을 생성할 수 있다. 본 연구는 Generative AI 도구와 플랫폼이 디지털 아트 전공학생들에게 미치는 영향을 탐구 하였으며, 특히 창작 과정에 그들의 역할과 작품에 미치는 영향을 구체적으로 살펴보았다. 또한, 본 연구는 Generative AI 작품에 의해 디지털 아트 전공 학생들에게 필요한 기술이나 특징에 대한 질적 연구법 중의 주체 분석 방법으로 자세히 연구하였다.

Highly radioactive waste is solidified to restrict leaching, retain its shape, and maintain its structural stability to prevent it from affecting humans and the environment as much as possible. This operation should be performed consistently regardless of whether the waste is homogeneous or heterogeneous. However, currently, there are no specific performance requirements for heterogeneous waste in Korea. This study reviewed domestic research results and the status of overseas applications, and proposed immobilization requirements for heterogeneous waste to be applied in Korea. IAEA safety standards, domestic laws, and waste acceptance criteria were reviewed. The status of heterogeneous waste immobilization in countries such as the United States, France, and Spain was reviewed. Most countries treat heterogeneous waste by encasing it in concrete, and impose immobilization requirements on this concrete. Based on these data, safety standards for the thickness, compressive strength, and diffusion limit of this concrete material were proposed as immobilization requirements for heterogeneous waste disposal in Korea. Quantitative values for the above requirements need to be derived through quantitative assessments based on the characteristics of domestic heterogeneous waste and disposal facilities.

코로나 사태 이후 공연예술계는 ‘초지능화’와 ‘초연결성’의 특징으로 대표되는 메타버스에 주목 하기 시작했다. 직접 만나서 소통할 수 없는 비대면적 상황은 현실세계와 가상공간을 연결해 주는 메타버스 플랫폼 전시 공연 활성화에 큰 영향을 끼쳤다. 코로나 사태가 끝난 이후에도 공연예술계는 다양하고 실험적인 온-오프라인 공연의 형태로 해당 기술을 활용한 다양한 프로 젝트 전시들을 선보이고 있다. 이처럼 실감 콘텐츠와 가상현실을 접목한 VR, XR 기술들은 빠 르게 실감 콘텐츠와 전시공연분야에 접목되며 실험적이고 다양한 공연과 전시를 선보이고 있 다. 메타버스 플랫폼을 활용한 전시와 공연들이 관객들이 어떠한 방식으로 다가가고 있는지 실감 콘텐츠 공연사례들을 분석하고, 가상현실이 일상화되고 있는 요즘, 전시와 공연 예술 분 야의 변화의 방향을 살펴본다.

In this study, we investigated the suppression of the corrosion of cast iron in a copper–cast iron double-layered canister under local corrosion of the copper layer. The cold spray coating technique was used to insert metals with lower galvanic activity than that of copper, such as silver, nickel, and titanium, between the copper and cast iron layers. Electrochemically accelerated corrosion tests were performed on the galvanic specimens in KURT groundwater at a voltage of 1.0 V for a week. The results revealed that copper corrosion was evident in all galvanic specimens of Cu–Ag, Cu–Ni, and Cu–Ti. By contrast, the copper was barely corroded in the Cu–Fe specimens. Therefore, it was concluded that if an inactive galvanic metal is applied to the areas where local corrosion is concerned, such as welding parts, the disposal canister can overcome local or non-uniform corrosion of the copper canister for long periods.

Silage inoculants, crucial in modern silage production, comprise beneficial microorganisms, primarily lactic acid bacteria (LAB), strategically applied to forage material during ensiling. This study aimed to compare the effectiveness of various inoculants produced by different companies. Five treatments were evaluated, including a control group: T1 (Lactobacillus plantarum), T2 (Lactobacillus plantarum + Pediococcus pentosaceus), T3 (Lactobacillus plantarum + Pediococcus pentosaceus + Lactobacillus buchneri), T4 (Lactobacillus plantarum + Lactobacillus acidophilus + Lactobacillus bulgaricus), and T5 (Lactobacillus plantarum + Pediococcus pentosaceus + Enterococcus faecium). Italian ryegrass was harvested at the heading stage and treated with these silage inoculants. Samples were collected over a 60-day ensiling period. Co-inoculation with L. plantarum and P. pentosaceus (T2) resulted in significantly higher CP compared to the control group co-inoculation exhibited with resulted in Lactobacillus plantarum and Pediococcus pentosaceus in the T2 treatment exhibited higher CP content of 106.35 g/kg dry matter (DM). The T3 treatment, which included heterofermentative bacterial strains such as Lactobacillus buchneri, exhibited an increase in acetic acid concentration (11.15 g/kg DM). In the T4 treatment group, which utilized a mixed culture of Lactobacillus acidophilus and Lactobacillus bulgaricus, the NH3-N/TN content was observed to be the lowest (20.52 g/kg DM). The T5 containing Enterococcus faecium had the highest RFV (123) after 60 days. Expanding upon these findings, the study underscores not only the beneficial effects of particular inoculant treatments on silage quality but also underscores the potential of customized inoculation strategies in maximizing nutrient retention and overall silage preservation.

본 연구는 민간시장의 절화 유통 현황을 조사하여 국내 절 화 시장 유통 및 판매의 기초 자료로 제공하고자 수행하였다. 조사 기간은 2022년 5월부터 10월까지이며, 민간시장 내 판 매 점포 수, 취급 품목, 수입국 및 품목 등을 비교 및 분석하 였다. 민간시장은 서울 서초구 반포동에 위치한 강남터미널 꽃시장을 대상으로 판매 품목 및 수입 국가 등을 조사하였고, 비교 대상인 공영시장의 경우 한국농수산식품유통공사 화훼 유통정보에서 제공되는 양재동 화훼공판장 거래 품목을 조사 하였다. 조사 결과, 민간시장의 월별 절화 판매 점포 수는 평 균 143개였다. 민간시장에서는 5월을 제외하고 장미 판매 매 장이 가장 많았다. 5월에는 카네이션 판매 매장이 가장 많았 으며 장미, 리시안셔스, 거베라가 그 뒤를 이었다. 민간시장 점포 내 수입 품목의 원산지는 호주, 중국, 콜롬비아, 이스라 엘, 이탈리아, 일본, 네덜란드, 페루, 남아프리카 공화국, 미 국, 베트남 등으로 조사되었다. 취급 품목은 민간시장이 69개 로 공영시장 18개에 비해 약 3.8배 많았으며, 이는 민간시장에서 수입 절화가 더 많이 유통되고 있음을 시사한다. 민간시 장은 공영시장과 달리 유통 정보를 알 수 있는 시스템이 없어 소비자들이 제품의 원산지, 품질, 가격 등을 파악하기 어렵다. 따라서, 민간시장의 절화 유통 정보를 소비자들에게 정확히 제공할 필요가 있으며, 이를 통한 투명한 거래 제공 및 소비자 의 신뢰도를 높이는 것이 중요하다.

목적 : 본 연구는 8세에서 19세의 근시 학생을 대상으로 어린이 근시관리 누진 안경렌즈의 착용실태를 조사하고 착용 후 2년간 근시도의 변화를 확인하고자 하였다. 방법 : 2019년 6월부터 2023년 5월까지 수원 G 안경원에서 어린이 근시관리 누진렌즈를 구매한 110명을 대상 으로 근시 진행완화를 위해 렌즈의 착용을 지속하고 있는지 그리고 중도 포기했다면 그 이유를 조사하였다. 그 후 2차 정기방문으로 안경을 다시 교정받은 기록이 있는 72명을 대상으로 초점렌즈(A그룹, 33명)와 어린이 근시관리 누진렌즈(B그룹, 39명)를 착용한 두 그룹으로 나누어 2년간 추적 조사하였다. 결과 : 어린이 근시관리 누진렌즈를 처방받은 110명의 1차 대상자 중 15명(13.6%)이 근시진행 완화 안경 착용 을 중도 포기했으며 이들 중 남자는 11명(73.3%), 여자는 4명(26.6%) 이었다. 또한, 중도 포기한 이유로는 구매의 편의성과 비용문제가 주된 이유로 조사되었다. 1차, 2차, 3차 방문 시기에 평균 등가구면 굴절력은 A그룹에서는 – 2.09±1.43, –2.78±1.52, –3.31±1.55 D이었고, B그룹은 –2.04±1.08, –2.63±1.06, -2.94±1.08 D로 측정되 었다. 각각의 안경을 2년간 착용한 후에 평균 등가구면 굴절력의 변화량은 A그룹에서 –1.22±0.56 D이었고, B그 룹에서는 –0.90±0.51 D를 보였다(p=0.010). 결론 : 8세에서 19세의 근시가 있는 초중고 학생은 2년 간 어린이 근시관리 누진렌즈를 착용한 후에 단초점렌즈 를 착용한 그룹에 비해 근시 진행이 지연되었다. 근시관리 안경렌즈의 성공적인 시장 정착을 위해서는 더욱 다양한 모집단을 장기 추적 관찰하여 그 효과를 연구한 자료가 필요하다고 생각된다.

The bentonite buffer material is a crucial component in an engineered barrier system used for the disposal of high-level radioactive waste. Because a large amount of heat from the disposal canister is released into the bentonite buffer material, the thermal conductivity of the bentonite buffer is a crucial parameter that determines the design temperature. At the Korea Atomic Energy Research Institute (KAERI), a new standard bentonite (Bentonil-WRK) has been used since 2022 because Gyeongju (KJ) bentonite is no longer produced. However, the currently available data are insufficient, making it essential to investigate both the basic and complex properties of Bentonil-WRK. Thus, this study evaluated its geotechnical and thermal properties and developed a thermal conductivity empirical model that considers its dry density, water content, and temperature variations from room temperature to 90°C. The coefficient of determination (R2) for the model was found to be 0.986. The thermal conductivity values of Bentonil-WRK were 1–10% lower than those of KJ bentonite and 10–40% higher than those of MX-80 bentonites, which were attributable to mineral-composition differences. The thermal conductivity of Bentonil-WRK ranged between 0.504 and 1.149 W·(m−1·K−1), while the specific heat capacity varied from 0.826 to 1.138 (kJ·(kg−1·K−1)).

본 연구를 통해 한국산 Thyas속을 검토하였다. 이 중, T. coronata (Fabricius, 1775)는 성충 및 생식기 도해사진을 기반으로 최초로 그 분류학 적 기재문을 작성하였다. 모든 한국산 Thyas속 종에 대한 분류학적 진단형질 및 분포 정보를 함께 제공하였다.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

This study explores the profound impact of varying oxygen content on microstructural and mechanical properties in specimens HO and LO. The higher oxygen concentration in specimen HO is found to significantly influence alpha lath sizes, resulting in a size of 0.5-1 μm, contrasting with the 1-1.5 μm size observed in specimen LO. Pore fraction, governed by oxygen concentration, is high in specimen HO, registering a value of 0.11%, whereas specimen LO exhibits a lower pore fraction (0.02%). Varied pore types in each specimen further underscore the role of oxygen concentration in shaping microstructural morphology. Despite these microstructural variations, the average hardness remains consistent at ~370 HV. This study emphasizes the pivotal role of oxygen content in influencing microstructural features, contributing to a comprehensive understanding of the intricate interplay between elemental composition and material properties.