Reinforced concrete (RC) piloti buildings are vulnerable in the event of earthquake because the stiffness in the 1st story columns is weak to compare with the members in upper stories. In this study, seismic performances of RC piloti structures were evaluated considering with different types of floor plane layouts according to core eccentricity. With four types of floor plane layouts, five stories plioti structures were evaluated by two approaches, a nonlinear pushover analysis and a nonlinear time-history analysis. In order to improve seismic performances by satisfying the collapse prevention (CP) level, two ductile reinforcing methods by carbon fiber sheets and steel jackets were applied. Due to eccentricities in stiffness and mass with directions of plane and vertical stories, piloti structures were greatly influenced by higher order modes, so the seismic performances by the time-history analysis were significantly different from by the static pushover analysis.
이 연구를 통해 우리나라에서 복원 중인 멸종위기종인 반달가슴곰(Ursus thibetanus ussuricus)의 식별을 위한 새로운 분자 marker 체계를 개발하였다. 전장 유전체 서열 정보를 사용하여, 20개의 새로운 미세부수체(Microsatellite, MS) marker가 다중 중합효소연쇄반응(PCR)을 기반으로 하는 유전자형 분석을 통해 개발되었다. 개발된 MS marker 20종의 대립유전자 수는 3개에서 10개였으며, 평균 대립유전자 수는 6.05개였다. 관측 이형접합도(Hobs), 기대 이형접합도(Hexp), 다형정보량(PIC)의 평균은 각각 0.683, 0.715, 0.658로 나타났다. Fis 값은 –0.385에서 0.438의 범위에 있었고, 평균은 0.052였다. 무작위 교배(PIrandom), 반형매 교배(PIhalf-sib), 전형매 교배(PIfull-sib)에서의 동일개체출현율은 각각 1.58×10-18, 2.79×10-14, 4.75×10-8를 나타내었다. 이 연구의 결과는 새로운 MS marker 체계가 높은 유전적 다양성과 낮은 PI 수치를 가지고 있어, 야생에서 출현하고 있는 반달가슴곰들을 식별하거나 새끼 곰의 부모 추적에 유용하게 사용될 것으로 생각된다. 이 분자 marker 체계는 한국에서 복원 중인 반달가슴곰 개체군의 관리와 유전적 다양성 증진에 기여할 수 있을 것으로 사료된다.
국화도는 화성시 동쪽에 위치한 섬으로 지질학적으로는 경기육괴의 서부 가장자리에 속하나 최근 한반도 지체구 조구의 재정립에 따라 홍성-임진강대에 포함된다. 최근 보고된 국화도 일원의 분포 암석들에 대한 지질구조 및 연대측정 결과를 기초로 분포 암석 및 변형구조의 특성을 논의하고 학술적으로 가치 있는 다양한 지질유산을 보고하고자 한다. 국화도의 암상은 석영, 방해석, 장석으로 구성된 밝은색의 저변성 변성사질암과 규암, 각섬석-흑운모-사장석-티타나이트로 구성된 어두운색의 각섬암과 변성니질암, 그리고 석회질 편암 혹은 석회질 규산염암과 같이 3개 단위층으로 구분된다. 이들 암체는 후기 트라이아스기의 섬장암에 의해 관입되었다. 단위층들의 경계는 뚜렷한 호층구조와 함께 엽리 방향에 평행하며 습곡작용에 의하여 반복되어 산출한다. 저변성 변성사질암에는 사층리, 점이층리, 대칭연흔이 관찰되어 이 지역 의 퇴적환경이 조간대 혹은 호수환경을 지시한다. 단위층들의 퇴적시기(후기 데본기-전기 펜실베이니아아기)와 섬장암의 U-Pb 저어콘 연령(232 Ma)으로부터 국화도에 일원에 발생한 최소 2회의 강한 습곡작용의 시기는 펜실베이니아아기-후 기 트라이아스기로 판단된다. 국화도 대부분의 노두에서는 등사(isoclinal) 및 밀착(tight) 습곡이 횡와 내지 수직습곡의 형태로 관찰되며 이들 습곡의 날개부에는 전단에 의한 비대칭 습곡과 부딘구조가 발달한다. 또한 이들 단위층과 습곡구 조를 절단하는 충상단층도 발달한다. 따라서 국화도는 한반도 중서부지역의 변성 및 변형작용의 특징이 잘 보존된 지질 유산이 풍부한 지역으로 학술적 가치와 함께 학생과 교사들의 지질학습장으로 활용성도 뛰어난 명소이다.
경상분지 동남부인 부산 기장군에 분포하는 이천리층은 퇴적시기와 층서 대비가 이루어지지 않은 백악기 퇴적 층으로 최근 방산충 화석을 포함하는 쳐트역이 보고되어 기원지에 대한 관심이 높은 지역이다. 이번 연구에서는 이천리 층의 퇴적시기와 기원지를 규명하고, 후기 백악기 경상분지의 고지리에 대한 정보를 얻기 위해 이천리층 사암 내 쇄설 성 저어콘을 이용해 U -Pb 연대를 분석하였다. 이천리층은 선캄브리아시대에서 중생대 백악기에 이르는 넓은 연령 분포 를 보이며, 백악기, 페름기, 고원생대 연령이 우세하다. 약 95 Ma의 최소 가중평균연령을 통해 이천리층의 최대 퇴적시 기는 후기 백악기 초 세노마눔절(Cenomanian)로 제한된다. 외래기원의 방산충 함유 쳐트역과 함께 한반도 내 인접 지역에서는 분포하지 않는 중기 페름기 저어콘의 높은 함량은 이천리층의 퇴적 동안 남서 일본 지역으로부터 퇴적물이 유입되었음을 시사한다. 연대 분포를 비교한 결과, 이천리층의 주된 퇴적물 공급지는 영남육괴와 미노-탐바 쥐라기 복 합체(Mino-Tamba Jurassic accretionary complex)로 해석되며 퇴적물 공급 과정에서 페름기 연령을 가지는 암체 (Maizuru Belt)와의 혼합이 중기 페름기 저어콘의 높은 산출량에 기여한 것으로 판단된다. 다차원척도법 (multidimensional scaling)을 이용한 통계적 유사도 분석 결과도 이와 같은 해석을 뒷받침한다.
In this study, we report significant improvements in lithium-ion battery anodes cost and performance, by fabricating nano porous silicon (Si) particles from Si wafer sludge using the metal-assisted chemical etching (MACE) process. To solve the problem of volume expansion of Si during alloying/de-alloying with lithium ions, a layer was formed through nitric acid treatment, and Ag particles were removed at the same time. This layer acts as a core-shell structure that suppresses Si volume expansion. Additionally, the specific surface area of Si increased by controlling the etching time, which corresponds to the volume expansion of Si, showing a synergistic effect with the core-shell. This development not only contributes to the development of high-capacity anode materials, but also highlights the possibility of reducing manufacturing costs by utilizing waste Si wafer sludge. In addition, this method enhances the capacity retention rate of lithium-ion batteries by up to 38 %, marking a significant step forward in performance improvements.
The demand for ceramic brackets, which have a high aesthetic purpose due to their high light transmission is increasing due to the application of poly-crystalline alumina material. Brackets using this material require stable properties that should not fracture during the treatment period. In this paper, the fracture strength of a ceramic bracket made of the same material used in clinical practice was checked by applying torque with a square stainless steel wire. The wire used in the test was prepared with cross-section sizes of 017 inch ✕ 025 inch, 018 inch ✕ 025 inch, and 019 inch ✕ 025 inch. There were a total of 150 bracket specimens and after ligating wires in the slots, torque was applied to each of 75 specimens in the gingival and occlusal directions. The torque test used digital torque meter equipment and the torque value at which the bracket slot fractured due to plastic deformation of the ligated wire was confirmed. Based on the resulting data we plan to use the data to recommend stable torque use and develop future bracket design.
본 연구는 산업화 유망 식물인 회화나무의 이차대사산물 대량생산용 캘러스 확보에 필요한 기초조건을 확인하고자 수행하였다. 기내 배양한 회화나무 하배축을 2.0 mg·L-1 NAA + 0.1 mg·L-1 TDZ 배지에서 배양하였을 때 유백색의 부드러운 캘러스가 형성되었고, 캘러스 형성률 100±0.0%, 캘러스 형성에 걸리는 기간 7.1±0.03일, 캘러스 무게 249.8±12.73 mg으로 가장 효과적임을 확인하였다. 또한, 하배축에서 유도한 캘러스는 백색광 조건의 1.0 mg·L-1 IBA + 0.1 mg·L-1 TDZ 처리 배지에서 배양하였을 때 연노란색의 단단한 캘러스가 다량으로 형성되었고, 캘러스 생체중 186±5.4 mg, 면적 40.6±1.6 mm2으로 가장 무겁고, 크기가 우수한 것을 확인하였다. 기내 배양한 캘러스 소재 추출물의 추출수율은 50% 에탄올 추출 시 59%, 물 추출 시 54%로 확인하였고, 추출물 내 유효성분으로 마키아인 함량은 1.68 mg·g-1으로 검출되었다. 본 연구의 결과는 산업화 식물로써 유망있는 수종인 회화나무의 기내 대량증식과 이차대사산물 생산성을 향상할 수 있는 위한 기초자료로 활용할 수 있을 것이다.
전라북도 무주군에 분포하는 백악기 무주분지의 퇴적시기 및 퇴적물의 기원지를 파악하기 위해 쇄설성 저어콘 U-Pb 연대측정을 수행하였다. 시료는 설천응회암(SCT), 방이리층(BYR), 길왕리층의 고방층원(GWR-G), 서창층원(GWR-S), 북창층원(GWR-B), 적상산층(JSS)으로 총 6개가 채취되었다. 연대측정 결과 무주분지의 퇴적층은 약 105.6-90.4 Ma에 걸쳐 퇴적되었고, 지질시대로는 알바절에서 투로니아절에 해당한다. 무주분지 서쪽에 분포하는 방이리층과 길왕리층 고 방층원 시료에서 각각 약 94.4 Ma와 89.6 Ma의 단일 저어콘 최소연령이 확인되어, 기존에 길왕리층 역암을 기준(암층 서)으로 설정된 상대연령에 대해 추가연구를 통한 재확인이 필요하다. 그리고 무주분지를 채우고 있는 대부분의 퇴적물 들이 무주분지와 인접한 제한된 지역에서 공급되었을 것으로 판단된다.
In this study, we designed and manufactured a large angular contact ball bearing (LACBB) with low deformation using JIS-SUJ2 steel and analyzed changes in its structural characteristics and chemical composition upon heat treatment. The bearing was produced by hot forging and heat treatment including a quenching and tempering (Q/T) process, and its properties were analyzed using 4 mm thick specimens. A difference in the size distribution of the carbide in the outer and inner parts of the bearing was observed and it was confirmed that large and non-uniform carbide was distributed in the inner part of the bearing. After heat treatment, the hardness value of the outer part increased from 13.4 HRC to 61 HRC and the inner part increased from 8.0 HRC to 59.7 HRC. As a result of X-ray diffraction (XRD) measurements, the volume fraction of the retained austenite contained in the outer part was calculated to be 3.5~4.8 % and the inner part was calculated to be 3.6~5.0 %. The surface chemical composition and the content of chemical bonds were quantified through X-ray photoelectron spectroscopy (XPS), and a decrease in C=C bonds and an increase in Fe-C bonds were confirmed.
양산시 동면 금산리 일원의 공사현장 사면 3개 지점에서 미고결 퇴적층을 절단하는 단층이 확인되었으며, 노두 단면에서 관찰되는 단층의 상세 구조분석을 수행하였다. 이곳 금산리 지점은 기존에 제4기 단층운동이 보고된 가산단층 지점으로부터 북쪽으로 약 0 .6 k m 떨어진 곳에 위치한다. 관찰된 총 6조의 단층들은 14o-32oE 주향을 가지고 3조의 단 층들은 77o-87oNW, 나머지 3조의 단층들은 53o-62oSE로 경사진다. 단층에 의해 절단된 미고결 퇴적층은 동편의 금정산 에서 유래된 선상지 역암으로 주로 화강암 또는 화산암 기원의 직경 0.5m 이상의 거력으로 구성된다. 단층면 상에 발 달하는 단층조선은 역이동성 성분이 포함된 우수향 주향이동단층 운동감각을 지시하며, 이러한 변형특성은 한반도 현생 응력환경인 동북동-서남서 압축응력과 부합한다. 사면에서 관찰되는 기반암과 미고결 퇴적층과의 부정합면을 기준으로 산정한 단층의 겉보기 수직변위는 동편이 15 m, 서편이 1 m이다.
본 연구는 국내의 한우 개량에 있어서 정확한 혈통 정보가 중요해짐에 따라 고밀도 Single Nucleotide Polymorphism (SNP) chip의 SNP 정보들을 활용한 친자 확인으로 혈통 정보의 신뢰도 향상에 기여하고자 실시하였다. 이미 혈통 정보가 확인되고 Microsatellite (MS) 유전자형으로 친자 여부가 확인된 14개의 가계, 318두로 친자 확인 분석을 하였다. Call rate 100%인 마커들을 활용한 친자 확인 분석 결과, 9두가 모 부정, 19두가 완전 부정으로 총 28두가 부정으로 판정되었고, 이는 부모의 SNP 정보에서 나올 수 있는 조합과 다른 자식의 유전자형이 확인되었다. 이후, 친자 확인 정확도 향상을 위해 call rate와 minor allele frequency (MAF)를 기준으로 SNP 마커 수를 증가시켜 분석하였으나 부정으로 판정되는 개체들이 추가적으로 발생하였고, 이는 SNP 정보의 결측치 증가 및 자식의 유전자형 변이로 인한 것으로 판단된다. 따라서 고밀도 SNP chip을 활용한 친자 확인 분석에는 보다 신중한 접근이 필요하며, 본 연구 결과는 고밀도 SNP 정보를 이용한 친자 확인 연구에 있어서 기초자료로 활용될 수 있을 것으로 사료된다.
Special equipment used for snow removal is only used in the winter and must be moved into storage during non-winter seasons. However, when moving heavy equipment using a forklift within a limited space, safety accidents may occur due to deformation and damage due to the worker's limited visibility and excessive loading of heavy objects. In this study, the scissors boom of the developed heavy load transporter was conducted in two cases: link structural analysis and position-based structural analysis. In detail, the link structural analysis covers four cases of stress and safety factor according to material and thickness to optimize the specifications of the material selected during development, and the structural analysis according to position covers two cases before and after the lift, when maximum stress concentration is achieved. Safety was evaluated through finite element analysis. As a result of the study, when manufacturing a scissors boom type heavy load transporter that can withstand a load of 10 tons, the link showed safety at SS400 4.5mm or higher, and reinforcement is needed in the upper and lower structures, so it is judged to be useful in applying materials according to the load.
Epoxy-based composites find extensive application in electronic packaging due to their excellent processability and insulation properties. However, conventional epoxy-based polymers exhibit limitations in terms of thermal properties and insulation performance. In this study, we develop epoxy-based siloxane/silica composites that enhance the thermal, mechanical, and insulating properties of epoxy resins. This is achieved by employing a sol–gelsynthesized siloxane hybrid and spherical fused silica particles. Herein, we fabricate two types of epoxy-based siloxane/ silica composites with different siloxane molecular structures (branched and linear siloxane networks) and investigate the changes in their properties for different compositions (with or without silica particles) and siloxane structures. The presence of a branched siloxane structure results in hardness and low insulating properties, while a linear siloxane structure yields softness and highly insulating properties. Both types of epoxy-based siloxane/silica composites exhibit high thermal stability and low thermal expansion. These properties are considerably improved by incorporating silica particles. We expect that our developed epoxy-based composites to hold significant potential as advanced electronic packaging materials, offering high-performance and robustness.
본 연구는 실내-외 우리가 있는 개방형 흑염소사에서 우리나라 5개월령 재래 흑염소를 대상으로 서열과 일주기 리듬이 하루 24시간 동안의 행동에 미치는 영향과 서열과 사료급여시간이 사료급여 후 30분 및 60분 동안의 행동에 미치는 영향을 조사하기 위해 수행하였다. 재래 흑염소의 행동은 CCTV를 사용해 녹화한 후 이들을 1분 단위로 측정하였고, 총 10개의 행동으로 분류하였다. 서열은 적대행동에 유의하게 영향을 미쳤으나 (p<0.05), 다른 행동에는 영향을 미치지 않았다. 일주기 리듬은 응립(p<0.05), 이동(p<0.01), 사료섭취(p<0.001), 적대행동(p<0.001), 비적대행동 (p<0.001), 사료탐색(p<0.05), 음수(p<0.001) 및 기타 행동(p<0.001)에 유의하게 영향을 미치는 반면 휴식(p>0.05)과 몸단장(p>0.05)에는 영향을 미치지 않았다. 서열과 일주기 리듬의 상호작용효과는 적대행동에만 유의하게 영향을 미쳤다(p<0.05). 서열은 사료급여 후 30분 동안 응립(p<0.05)과 사료섭취(p<0.05)에 유의하게 영향을 미쳤지만 다른 행동에는 영향을 미치지 않았다. 사료급여시간은 사료급여 후 60분 동안의 음수(p<0.05)에 유의하게 영향을 미쳤으나, 다른 행동에는 영향을 미치지 않았다. 서열과 사료급여시간의 상호작용효과는 모든 행동에 유의하게 영향을 미치지 않았다(p<0.05). 결론적으로, 서열, 일주기 리듬, 그리고 사료급여시간은 우리나라 5개월령 미성성숙한 재래 흑염소의 행동에 영향을 미치는 것으로 나타났다.
본 연구는 국내 차나무 품종을 대상으로 연평균 기온이 낮은 봉화군에 식재하여, 봉화지역 차나무 재배 가능성을 검토하고자 연구를 수행하였다. 봉화군 시험지 토양 조사 결과, 시험지별 토양의 pH, EC, 치환성양이온, 유효인산은 적정수준이었으며, 유기물 함량은 대체로 낮은 수치로 조사되었 다. 봉화군 시험지 기온 조사 결과, 최저 기온은 소천면이 -14.1℃로 가장 낮았고, 다음으로 춘양면 -12.6℃, 명호면 -12.6℃, -10.2℃ 순으로 모든 시험지는 -10℃ 이하의 낮은 온도로 조사되었다. 차나무 재배 생육평가 결과, 명호면 시험지에서 생육 정도가 가장 우수하였고, 다음으로 소천면, 온실, 춘양면 순으로 조사되었다. 또한, 재배품종 보향과 대조품종 다산은 시험지 생장량과 광합성량이 다른 수종에 비해 높은 것을 확인하였 다. 봉화지역과 하동지역에 식재된 참녹의 주요 생리활성물질인 catechin과 caffeine 함량을 조사한 결과, Catechin 함량은 EGC와 EC, EGCG 함량은 하동이 높게 조사되었고, 반면 ECG는 봉화지역의 참녹이 월등히 높았다. 총 catechin 함량은 봉화 5.23%, 하동 5.22%로 비슷하게 나타났다. Caffeine 함량은 봉화 0.05%, 하동 0.38%로 하동지역의 참녹이 높게 나타났다. 본 연구에서 봉화군 차나무 재배 생육평가 결과 명호면, 소천면이 차나무 재배에 유리할 것이며, 봉화지역 차나무 재배 시 재배품종 보향과 대조품종 다산은 재배 적응성이 높을 것으로 판단된다.