본 연구에서는 보육시설 내 식수인원 및 조리 종사자 근무현황에 따른 급식소 위생 관리수준을 평가하였다. 2021 년부터 2022년까지 풀무원푸드머스를 통해 식자재를 공급 받는 전국 199개 보육시설을 대상으로 61개 점검문항 중 평가결과에서 유의미한 일부 분석결과를 바탕으로 작성하 였다. 분석결과 식수인원이 적고, 조리 종사자가 적을수록 검수기록이 미 실시(P<0.05)되는 평가되었으며, 식수인원 이 적을수록 조리 종사자의 건강상태 확인이 미흡하고, 조 리 종사자가 적을수록 복장착용(P<0.05)이 미흡하였다. 또 한, 식수인원이 적은 보육시설일수록 소비기한 경과 식재 료 보관이 확인(P<0.05)되는 빈도 수가 높아 관리가 요구 되었으며, 가열조리 시 심부온도 측정기록은 미 실시(P<0.05) 되는 것으로 확인되었다. 그리고 식수인원이 적은 보육시 설일수록 조리시설의 유지관리가 미흡(P<0.05)하였다. ATP 측정결과에서는 식수인원이 적은 조리시설 종사자의 손과 도마에서 유의적으로 높은 ATP 수치가 검출(P<0.05)되었으 며, 조리종사자가 적을수록 근무 급식소의 도마에서 높은 ATP 수치(P<0.05)가 측정되었다. 분석결과를 종합해 볼 때 식수인원이 적은 보육시설일수록 조리운영을 위한 시설기반 관리가 부족하고, 위생관리가 미흡한 것으로 확인되었다. 따 라서 본 연구결과를 통해 식수인원 및 조리 종사자 수에 따 른 보육시설 급식소의 위생 관리수준을 판단하였으며, 향후 보육시설에 대한 국가 지원사업 선정 시 해당 연구결과가 기초자료로써 활용될 수 있을 것으로 사료된다.

Composite-based piezoelectric devices are extensively studied to develop sustainable power supply and selfpowered devices owing to their excellent mechanical durability and output performance. In this study, we design a leadfree piezoelectric nanocomposite utilizing (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 (BCTZ) nanomaterials for realizing highly flexible energy harvesters. To improve the output performance of the devices, we incorporate porous BCTZ nanowires (NWs) into the nanoparticle (NP)-based piezoelectric nanocomposite. BCTZ NPs and NWs are synthesized through the solidstate reaction and sol-gel-based electrospinning, respectively; subsequently, they are dispersed inside a polyimide matrix. The output performance of the energy harvesters is measured using an optimized measurement system during repetitive mechanical deformation by varying the composition of the NPs and NWs. A nanocomposite-based energy harvester with 4:1 weight ratio generates the maximum open-circuit voltage and short-circuit current of 0.83 V and 0.28 A, respectively. In this study, self-powered devices are constructed with enhanced output performance by using piezoelectric energy harvesting for application in flexible and wearable devices.

본 연구는 딸기의 삽목 육묘 시 묘소질을 향상시키고 품질을 증진시키기 위한 지베렐린 효과를 검증하기 위해 수행되었다. 품종은 ‘설향’을 대상으로 하였고, 삽목 시 삽수의 기부를 30, 60분간 GA3 50, 100, 150mg·L-1에 침지 처리하고 증류수 침 지를 대조구로 두었다. 정식 시 묘소질 조사 결과 엽수와 SPAD 값은 지베렐린 침지시간이 길수록 증가하였고, 초장, 엽병장, 엽장, 엽폭, 엽면적은 침지시간과 농도 간의 상호작용에 따라 유의하게 값이 변하였다. 관부직경은 같은 농도라 할지라도 침지시간에 따른 차이가 나타났으며 30분, 100mg·L-1 처리를 제외하고 모두 직경이 8.0mm 이상으로 우량한 묘가 생성되 었으며, T/R률은 30분, 50mg·L-1 처리에서 유의하게 작아 식 물체 활력이 가장 우수했다. 양자수율은 농도가 150mg·L-1일 때 저조하였고, 지베렐린 처리 농도가 높을수록 양자수율이 감소하는 경향을 나타냈다. NPQ는 대조구 대비 30분, 150mg·L-1 처리에서 유의하게 작아 묘 스트레스 감소에 효과 가 있었다. 항산화물 함량은 30분, 50mg·L-1 처리와 60분, 150mg·L-1 처리에서 높게 나타났고, 정식 후 생육조사 결과 화아분화 정도에 미치는 지베렐린의 부정적 영향은 없었다. 따라서, ‘설향’ 딸기의 삽목 육묘 시 지베렐린 처리는 정식묘 양성에 효과가 있는 것을 확인할 수 있었으며, 이때 대조구 대 비 생육 증진 및 품질 향상을 위해서는 삽수 기부를 50mg·L-1 의 지베렐린에 30분 침지처리하는 것이 보다 적정한 것으로 판단되었다.

화장품 소재는 안전성이 무엇보다 중요시된다. 화장품에 사용되는 기존의 보존제인 PE에 대장 균 효소 β–gal을 이용하여 안전성이 증가된 PE-gal을 생합성하였다. 화장품 소재로 사용하기 위해 생합 성된 생성물인 PE-gal의 피부 흡수도를 기존의 보존제인 PE와 비교하기 위해 Franz Diffusion cell Assay 시스템을 이용하여 경피투과도를 측정하였다. 같은 질량농도의 시료를 사용하였을 때 PE의 Flux 값, Kp 값은 시간이 지날수록 증가하는 것으로 나타났으나 PE-gal은 투과도를 측정할 수 있을 만큼 투과되지 못 하였다. 이는 PE의 피부투과도가 생합성된 PE-gal 배당체보다 높다는 것을 나타낸다. Marzulli 등에 따라 Kp 값을 이용하여 투과 정도를 확인하였을 때 PE의 투과속도는 1mg/mL의 농도에서 느림(slow)으로 측정 되었다. 따라서 배당체 형태의 PE-gal은 PE에 비해 경피 투과도가 현저히 낮게 나타났다.

Al2O3 has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al2O3 powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al2O3 powders in practical applications. All powders exhibited α-Al2O3 as the main phase, with the presence of beta-phase Na2O-11Al2O3 as the secondary phase. The highest Na+ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. Highconcentration Al2O3 slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

근대는 16세기부터 19세기까지 서유럽에 새로운 기풍과 제도가 진작되 어, 중앙집권적인 근대국가의 수립, 무역과 산업혁명을 통한 경제성장, 그 리고 국민의 정치참여가 확대된 것을 지칭한다. 그런데 동유럽과 북유럽은 조금 다른 길을 걸어왔다. 먼저 헝가리는 ‘선거왕제’ 아래 귀족들의 권한 이 왕권보다 강해 중앙집권화와 국민통합이 어려웠다. 폴란드도 귀족들이 ‘선거왕제’ 아래 국내 기반이 약한 외국인을 왕으로 선출하고, 귀족 개개 인이 ‘자유거부권’을 가질 정도의 막강한 권한을 갖고 상인 등 잠재적 경 쟁자를 억압함으로써, 경제발전과 국민통합이 어려웠다. 두 국가 모두 국 토 분할을 경험했으며, 20세기 들어와서야 겨우 독립을 얻었다. 반면 군사 강국 스웨덴은 18세기 러시아 패권에 밀려 쇠락하자, 서로 권력투쟁을 벌 이던 왕과 귀족들이 타협해 입헌군주제를 채택하고 뒤늦게 산업화를 추진 했다. 덴마크도 경쟁국인 스웨덴에 밀린 후 19세기 몰락 위기에 처하자, 입헌군주제와 자유무역주의를 채택해 국민통합을 이루고 뒤늦게 근대화에 동참했다. 결국 동유럽처럼 자신의 이익만 추구하는 귀족들이 약한 왕에게 책임을 전가하고 실제로 국가를 주도하면 근대의 진입이 늦어지며, 북유럽 과 같이 국가적 위기 상황 속에서 왕과 귀족이 연대하고 국민을 통합하면 서유럽과 같은 근대화에 성공할 수 있었다는 것을 알 수 있다.

나노에멀젼이란 20 ~ 200㎚ 정도의 입자 크기를 갖는 에멀젼으로 투명하거나 반투명한 외 관을 가지며, 작은 입자 사이즈로 유효물질의 피부 투과율을 향상시킬 수 있다는 장점이 있어 다양한 분야에서 응용되고 있다. 본 연구에서는 오일의 required HLB와 종류가 나노에멀젼 형성에 미치는 영향 에 대하여 알아보기 위해 required HLB가 다른 오일 8가지, 종류가 다른 16가지의 오일을 선정하여 연 구를 진행하였다. 이때 사용한 계면활성제로는 Polysorbate 60 (HLB 14.9), Sorbitan stearate (HLB 4.7), PEG-60 hydrogenated castor oil (HLB 14.0)이며 Polysorbate 60과 Sorbitan stearate를 혼합하여 HLB 14.0으로 고정한 것과 Polysorbate 60, PEG-60 hydrogenated castor oil을 각각 사용하여 제조하 였다. 오일의 종류에 따라 나노에멀젼 형성이 다르게 나타났으며 에스터계 구조를 가지는 오일이 비교적 우수한 나노에멀젼 형성 능력을 보여주었는데, 특히 Cetyl ethylhexanoin이 평균 40㎚ 이하의 작은 사이 즈로 생성된 후 큰 변화없이 안정한 나노에멀젼이 형성된 것을 확인할 수 있었다. 또한, Polysorbate 60 과 Sorbitan stearate를 혼합하여 사용하는 것이 PEG-60 hydrogenated castor oil 혹은 Polysorbate 60 각각 단독으로 사용하는 것보다 우수한 나노에멀젼 형성 능력을 가지는 것으로 나타났다.

This study developed an IoT-based agricultural well control system and demonstrated it through a control system in the current state of domestic open-field smart farms where systematic management is insufficient due to the difficulty of collecting accurate data such as agricultural water intake and usage. As a result, it was possible to derive the optimal control system test results according to the watering conditions for each schedule by conducting automatic control focusing on periods when there is no precipitation. This means that irrigation can be carried out smoothly during the time when irrigation is needed to improve crop quality and secure farm income, and as a result, it is possible to systematically manage and operate among demonstration farms connected to irrigation, resulting in a shortage of agricultural water and a resolution of supply imbalances.

Since ships are exposed to noise and vibration for a long time in seas isolated from land, the stress of workers is high, requiring studies on the improvement of the problem. In addition, the health of crew members on fishing vessels, unlike commercial ships, carrying out fishing activities is closely related to fishing performance. However, considering that most of IMO's guidelines apply to merchant ships, provisions should be made for vibration in accommodation areas of fishing vessels. Accordingly, this study, applying the revised ISO 20283-5:2016 standard and through experiment, investigated the vibration characteristics of the accommodation area for each operating conditions of a 1000-ton trawler fishing vessel. Within the scope of the study and the full-ahead mode, the vibration was highest in the engine control room (4.17mm/s) while the acceptable standard was satisfied sufficiently in all conditions. Application of the merchant vessel vibration standard to fishing vessel is expected to improve the working environment of fishing vessel crew members.

선박이 부두에 안전하게 계류 및 예인하기 위해서는 관련 국제규정에 부합하는 설계를 해야 한다. 그러나 현재까지도 일부 소 형 조선소 및 설계 회사에서는 그 내용을 정확히 숙지하지 못하고 있는 경우가 많다. 따라서 본 논문에서는 예인 및 계류설비에 관한 국 제규정을 살펴보고, 최신 발효된 MEG4(Mooring equipment guideline 4) 기준에 만족하는 대표적인 계류 의장품인 볼라드(Bollard)와 쵸크 (Chock)를 개발하고자 한다. 볼라드는 계류 밧줄을 선체에 고박하기 위한 의장품이며, 일반적으로 2개의 기둥으로, 대부분은 8자 매듭 형 태로 사용하고 있다. 쵸크는 선외에서 선내로 들어오는 계류 밧줄의 방향을 전환하고, 밧줄의 손상을 방지하기 위하여 곡률을 갖는 주물 방식으로 제작한다. 이 두 가지 계류 의장품은 선박의 선수와 선미, 중앙부 측면에서 많이 사용되고 있다. 최근 컨테이너선 및 LNG 운반 선의 크기 증가로 인하여, 계류 밧줄 하중이 증가하고 있으며, 계류 의장품도 안전사용하중(Safe working load)이 변경되어야 한다. 본 연구 에서는 유한요소해석 모델링을 통한 허용응력 평가법 결과를 정리하고, 분석하였다. 추가적으로 비선형 붕괴 거동 평가를 통하여, 안전사 용하중 결정에 대한 검증을 수행하였고, 탄성영역 내 설계가 되었음을 확인하였다. 연구에서 제안하는 평가법 및 기준, 그리고 해석절차 는 향후 유사 의장품 개발 시 참조가 가능하다.

본 연구는 희귀난치 질환 자녀를 둔 가족의 생활 실태와 지원 욕구를 파악하여 지원방안을 모색하는 데 목적이 있다. 이를 위해 2020년 기준 전국의 희귀난치 환아 가족 약 169천 명 중 할당표본추출(quota sampling) 을 통해 모집된 총 263명을 대상으로 설문조사를 하였다. 그 결과, 희귀 난치 환아 가족의 주양육자는 여성으로 자녀 돌봄 및 간병 비중이 높았 고, 치료비지출로 인한 경제적인 부담이 매우 높았다. 전체 삶의 질 평 균 및 삶의 질 하위요인 전반에서 보통 이하의 인식수준을 보였고, 교 육 현장이나 과정에서 자녀의 질병에 대한 인식과 대처 관련 어려움이 큼을 확인하였다. 희귀난치 질환 및 자녀의 재학 상태에 따른 인식수준 도 매우 낮은 수준이었다. 이런 실태에 근거하여 가족지원을 위한 다차 원적인 지원방안을 제언하였다.

River estuaries are dynamic and productive ecosystems with high regional biodiversity. Environmental DNA (eDNA) has become a useful approach to assessing biodiversity in aquatic ecosystems. This study was conducted to investigate fish community characteristics and species diversity in two river estuary ecosystems, the Taehwa River and Changwon Stream. We further compared conventional and eDNA metabarcoding analyses of the fish communities. The conventional survey was performed in May, July, and October 2022, while the eDNA analysis was conducted only in May. We observed various fish species with different life histories, including carp, goby, and marine fish. We also found that migratory fish, such as dace Tribolodon hakonensis, sweetfish Plecoglossus altivelis, and eel Auguilla japonica, occurred in the Taehwa River, suggesting high river connectivity. Marine fish species were predominant in the Changwon Stream, as this river is located close to the sea. The diversity indices showed that the Taehwa River generally had higher species richness, evenness, and diversity values than the Changwon Stream. A total of 9-19 species were detected in the conventional survey for the three sites, whereas 11-18 species were found from eDNA analysis. The findings indicate that the sensitivity of eDNA was similar to or higher than that of the conventional method. Our study findings suggest the efficiency and efficacy of eDNA-based fish community monitoring, although with some shortcomings in applying the genetic marker to Korean fish, including no clear-cut distinction for Korean endemic species and/or genetically closely related species groups.

This study was performed to investigate antioxidant and anti-inflammatory activities of perilla(Perilla frutescens L.) seed, flower and leaf according to extraction condition. Perilla seed extracts(PSE), perilla flower extracts(PFE), perilla leaf extracts(PLE) was extracted by stirring extraction (STE, 25°C), shaking extraction (SHE, 80°C), and sonication assisted extraction(SAE, , 25°C) with 94% ethanol, 60% ethanol and distilled water, followed by analysis of total polyphenol and flavonoid and testing radical scavenging activities. The highest total polyphenol content (5.47, 9.36, 38.58 mg gallic acid equivalent/g), total flavonoid content(5.77, 8.62, 46.44 mg catechin equivalent/g), ABTS(10.68, 19.46, 63.56 mg trolox equivalent/g) and DPPH(6.51, 7.69, 79.73 mg trolox equivalent/g) radical scavenging activity of PSE, PFE and PLE was observed in the HWE with 60% ethanol,. Among the three extraction method, SHE provided the best results for yield, polyphenol, flavonoid content of perilla seed, flower, leaf in comparison to STE or SAE. SHE with 60% ethanol of perilla seed, flower, leaf more effectively inhibited secretion of nitric oxide(NO) and pro-inflammatory cytokine in RAW 264.7 macrophage exposed to LPS compared to other extraction solvent and method. Therefore, these extracts obtained from perilla seed, flower, leaf could be used antioxidant and anti-inflammatory ingredients in the food industry.

Mulberry fruit is a superior source of polyphenols, especially anthocyanin, and has a long history of use as an edible fruit and traditional medicine. The anthocyanin composition of mulberry fruit from 15 Korean cultivars was analyzed by ultra-performance liquid chromatography diode array detector with quadrupole time of flight/mass spectrometry (UPLC-DAD-QToF/MS) based on a cyanin internal standard. The four glycosides were identified by comparison with authentic standards and published reports. The major anthocyanin was cyanidin 3-O-glucoside (71.7%), followed by cyanidin 3-O-rutinoside (26.6%). The minor components (total of 1.7%) were pelargonidin 3-O-glucoside and pelargonidin 3-O-rutinoside. The total anthocyanin content (mg/100 g, dry weight) of mulberry fruit varied by cultivar and ranged from 471.5±4.0 (Su Hong) to 4,700.2±54.0 (Gwa Sang2). Among the 15 cultivars examined, Gwa Sang2 showed the highest level of cyanidin 3-O-glucoside (3,133.4±32.6), which was 9-fold higher than that of Su Hong (351.5±3.4). In conclusion, anthocyanin profiles, including pelargonidin 3-O-glucoside and pelargonidin 3-O-rutinoside, were reported for the first time from 15 Korean mulberry fruit cultivars. The results will contribute valuable information on pharmaceutical properties, breeding superior mulberry cultivars, and food industries.

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO4 is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO4O has two redox reactions (V5+/V4+/V3+) but low electrochemical activity. In this study, LiVPO4O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO4O1-xFx, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

The key to invasive pest management lies in preemptive action. However, most current research using species distribution models is conducted after an invasion has occurred. This study modeled the potential distribution of the globally notorious sweet potato pest, the sweet potato weevil (Cylas formicarius), that has not yet invaded Korea using MaxEnt. Using global occurrence data, bioclimatic variables, and topsoil characteristics, MaxEnt showed high explanatory power as both the training and test areas under the curve exceeded 0.9. Among the environmental variables used in this study, minimum temperature in the coldest month (BIO06), precipitation in the driest month (BIO14), mean diurnal range (BIO02), and bulk density (BDOD) were identified as key variables. The predicted global distribution showed high values in most countries where the species is currently present, with a significant potential invasion risk in most South American countries where C. formicarius is not yet present. In Korea, Jeju Island and the southwestern coasts of Jeollanam-do showed very high probabilities. The impact of climate change under shared socioeconomic pathway (SSP) scenarios indicated an expansion along coasts as climate change progresses. By applying the 10th percentile minimum training presence rule, the potential area of occurrence was estimated at 1,439 km2 under current climate conditions and could expand up to 9,485 km2 under the SSP585 scenario. However, the model predicted that an inland invasion would not be serious. The results of this study suggest a need to focus on the risk of invasion in islands and coastal areas.

With the increasing demand for electronic products, the amount of multilayer ceramic capacitor (MLCC) waste has also increased. Recycling technology has recently gained attention because it can simultaneously address raw material supply and waste disposal issues. However, research on recovering valuable metals from MLCCs and converting the recovered metals into high-value-added materials remains insufficient. Herein, we describe an electrospinning (E-spinning) process to recover nickel from MLCCs and modulate the morphology of the recovered nickel oxide particles. The nickel oxalate powder was recovered using organic acid leaching and precipitation. Nickel oxide nanoparticles were prepared via heat treatment and ultrasonic milling. A mixture of nickel oxide particles and polyvinylpyrrolidone (PVP) was used as the E-spinning solution. A PVP/NiO nanowire composite was fabricated via Espinning, and a nickel oxide nanowire with a network structure was manufactured through calcination. The nanowire diameters and morphologies are discussed based on the nickel oxide content in the E-spinning solution.

High-entropy alloys (HEAs) are characterized by having five or more main elements and forming simple solids without forming intermetallic compounds, owing to the high entropy effect. HEAs with these characteristics are being researched as structural materials for extreme environments. Conventional refractory alloys have excellent hightemperature strength and stability; however, problems occur when they are used extensively in a high-temperature environment, leading to reduced fatigue properties due to oxidation or a limited service life. In contrast, refractory entropy alloys, which provide refractory properties to entropy alloys, can address these issues and improve the hightemperature stability of the alloy through phase control when designed based on existing refractory alloy elements. Refractory high-entropy alloys require sufficient milling time while in the process of mechanical alloying because of the brittleness of the added elements. Consequently, the high-energy milling process must be optimized because of the possibility of contamination of the alloyed powder during prolonged milling. In this study, we investigated the hightemperature oxidation behavior of refractory high-entropy alloys while optimizing the milling time.

Aluminum alloys, known for their high strength-to-weight ratios and impressive electrical and thermal conductivities, are extensively used in numerous engineering sectors, such as aerospace, automotive, and construction. Recently, significant efforts have been made to develop novel aluminum alloys specifically tailored for additive manufacturing. These new alloys aim to provide an optimal balance between mechanical properties and thermal/ electrical conductivities. In this study, nine combinatorial samples with various alloy compositions were fabricated using direct energy deposition (DED) additive manufacturing by adjusting the feeding speeds of Al6061 alloy and Al-12Si alloy powders. The effects of the alloying elements on the microstructure, electrical conductivity, and hardness were investigated. Generally, as the Si and Cu contents decreased, electrical conductivity increased and hardness decreased, exhibiting trade-off characteristics. However, electrical conductivity and hardness showed an optimal combination when the Si content was adjusted to below 4.5 wt%, which can sufficiently suppress the grain boundary segregation of the α- Si precipitates, and the Cu content was controlled to induce the formation of Al2Cu precipitates.

PURPOSES : This study is to initiated to estimate the impact of mixed traffic flow on expressway section according to the market penetration rate(MPR) of automated vehicles(AVs) using a enhanced intelligent driver model(EIDM). METHODS : To this end, microscopic traffic simulation and EIDM were used to implement mixed traffic flow on basic expressway section and simulation network was calibrated to understand the change of impact in mixed traffic flow due to the MPR of AVs. Additionally, MOEs of mobility aspects such as average speed and travel time were extracted and analyzed. RESULTS : The result of the impact of mobility MOEs by MPR and level of service indicated that 100% MPR of AVs normally affect positive impact on expressway at all level of service. However, it was analyzed that improvements in the level of service from LOS A to C are minimal until the MPR of AVs reaches 75% or higher. CONCLUSIONS : This research shows that impact of MPR of AVs using EIDM of mixed traffic flow on basic expressway. Increasing MPR of AVs affects positive impact on expressway at all level of services. However, MPR from 25% to 75% of AVs in LOS A to C shows minimal impacts. Therefore, to maximize the effectiveness of AVs, appropriate traffic operation and management strategies are necessary.