Background: Individuals with pes planus tend to overuse the extrinsic foot muscles, such as the tibialis anterior (TA) and peroneus longus (PL), to compensate for the weakened intrinsic foot muscles, such as the abductor hallucis (AbdH). Furthermore, differences in weight-bearing can affect the activity of muscles in both the intrinsic and extrinsic foot muscles. To date, no study has compared the effects of the short foot exercise (SFE) and toe spread-out exercise (TSO) on intrinsic and extrinsic foot muscle activity and the corresponding ratios in different weight-bearing positions. Objects: To compare the effects of the SFE and TSO on AbdH, TA, and PL activity and the AbdH/TA and AbdH/PL activity ratios in the sitting and standing positions in individuals with pes planus. Methods: Twenty participants with pes planus were recruited. Surface electromyography was used to assess the amplitudes of AbdH, TA, and PL activity. Participants performed both exercises while adopting both the sitting and standing positions. Results: No significant interaction between exercise and position was found regarding the activity of any muscle or ratio of the activity, except for PL activity. We observed a significant increase in AbdH activity during the TSO compared to the SFE, and no significant difference in TA and PL activity between the two exercises. AbdH, TA, and PL activity were significantly higher in the standing position than in the sitting position. Furthermore, the AbdH/PL activity ratio significantly increased in the sitting position, although there was a significant increase in AbdH activity in the standing position. Conclusion: In individuals with pes planus, we recommend performing the TSO in the sitting position, which may increase the activity of the AbdH while concurrently decreasing the activity of the TA and PL, thus strengthening the AbdH.

수염풍뎅이(Polyphylla laticollis manchurica)는 과거에는 흔히 발견되었으나, 1970년대 이후 한반도 내 개체수 가 급격히 감소하여 2005년 환경부에 의해 멸종위기 야생생물 Ⅰ급으로 지정되었다. 또한 해당종의 분자생물학적 연구는 멸종위기종이라는 특성으로 인해 제한적으로 진행되었다. 그로 인해 NCBI 등 공공 데이터베이스에서 제공되는 서열정보들 또한 부족한 실정이다. 이 연구는 이러한 한계를 극복하고 수염풍뎅이의 유전적 특성을 규명하기 위해 생물정보학적 기술을 활용하여 전사체 분석을 진행하였다. Illumina HiSeq 2500 플랫폼을 사용하여 53,433,048개의 RNA reads를 얻었으며, Trinity와 TGICL을 이용한 De novo 어셈블리 분석을 통해 18,172개의 unigenes를 생성하였다. 생성된 unigenes는 GO, KOG, KEGG, PANM DB를 활용하여 annotation을 진행하였다. 그 결과, GO 분석에서는 ‘binding and catalytic activities’와 관련된 항목이 높은 발현을 보였으며, KOG 분석의 경우 ‘Cellular Processes and Signals’ 범주가 높은 비율을 나타내었다. KEGG 분석을 통해 2,118개의 unigenes가 metabolic 카테고리에 annotation된 것을 확인하였다. SSR 모티프 분석에서는 AT/AT (42.90%) 모티프, AAT/ATT (13.13%) 모티프 순으로 많이 나타나는 것을 확인하였다. 이 연구를 통해 분석한 결과 들을 이용하여 유전자원 및 종 정보를 실시간 제공 및 정보 공유가 가능하도록 Database 및 web-interface를 구축하 였으며, 이러한 자료들은 국내 멸종위기종인 수염풍뎅이의 고유한 유전적 특성을 발굴 및 확보할 수 있는 기반자 료로써 활용될 수 있을 것으로 사료된다.

Haemaphysalis longicornis는 사람과 동물에게 여러 심각한 병원체를 전달하는 주요 매개체로, 한반도에 널리 분포하고 있다. H. longicornis는 Rickettsia spp., Borrelia spp., Francisella spp., Coxiella spp., 그리고 중증열성혈소판 감소증후군 바이러스 (SFTS virus) 등을 매개하는 것으로 알려져 있다. 국내에 서식하는 H. longicornis의 미생물 군집과 관련된 연구는 많이 진행되지 않은 것으로 확인되었다. 이 연구는 한반도 내 다양한 지역에서 채집된 H. longicornis의 미생물군집 다양성을 지역별, 성장 단계 및 성별에 따라 분석하였다. 2019년 6월부터 7월까지 질병관리청 권역별기후변화매개체감시거점센터 16개 지역에서 채집한 H. longicornis의 16S rRNA 유전자 V3-V4 영역을 PCR로 증폭 후 Illumina MiSeq 플랫폼으로 시퀀싱하였다. Qiime2를 활용한 미생물 다양성 분석을 통해 총 46개의 샘플에서 1,754,418개의 non-chimeric reads를 얻었으며, 평균 126개 의 operating taxonmic unit (OTU) 을 식별하여 총 1,398개의 OTU를 확인하였다. 대부분의 지역에서 Coxiella spp.가 우점종으로 나타났으며, 특히 Coxiella endosymbiont는 가장 높은 우점도를 보이며, Coxiella burnetii와 계통 발생 학적으로 유사한 것으로 확인되었다. 이 연구를 통해 분석된 결과는 각 지역의 H. longicornis 미생물군집 데이터 베이스 구축에 활용되었으며, 이를 통해 지역별 미생물군집의 특이성을 식별할 수 있게 하였다. 이는 한반도의 H. longicornis에 의한 질병 전파 연구와 이를 통한 공중보건 개선에 기여할 것으로 기대된다.

Calonecrinae represent a unique but small subfamily of Nitidulidae that is endemic to South Asia. Their habitats, the South Asian lowland forests, are under the imminent threat of degradation, posing a risk of rapid extinction for these species in their specific locales. Despite the looming threat to their existence, our understanding of this enigmatic group remains limited. We conducted an examination of museum and newly collected specimens, alongside a review of the literature, leading to the discovery of a new species, Calonecrus mindanaoensis, from Mindanao, Philippines. For the first time, the morphology of all immature stages of the Calonecrinae was described, with detailed photographs including SEM images. Additionally, their natural history was uncovered for the first time, revealing that all life stages are uniquely adapted to spending their entire life cycle within sticky resin. We re-evaluated the phylogenetic placement of the Calonecrinae by constructing a phylogenetic tree based on the mitochondrial genome. Calonecrinae are positioned within the Epuraeinae clade and show significant affinity with the genus Trimenus. Consequently, this study proposes reclassifying Calonecrinae as Calonecrini stat nov, an extremely modified tribe within the Epuraeinae.

High-quality diamond films have attracted extensive attentions due to their excellent optical and electrical properties. However, several issues, such as random orientation, stress accumulation, and slow growth rate, severely limit its applications. In this paper, high-quality polycrystalline diamond films with highly ordered (100) orientation were prepared by microwave plasma chemical vapor deposition. The effects of growth parameters on the microstructure, quality and residual stress of diamond films were investigated. Experimental results indicate that relatively high temperature at low methane concentration will promote the formation of (100) oriented grains with a low compressive stress. Optimized growth parameters, a methane concentration of 2% along with a pressure of 250 Torr and temperature at 1050 ℃, were used to acquire high growth rate of 7.9 μm/h and narrow full width at half maximum of Raman peak of 5.5 cm− 1 revealing a high crystal quality. It demonstrates a promising method for rapid growth of high-quality polycrystalline diamond films with (100) orientation, which is vital for improving the diamond related applications at low cost.

The rack cylinder is an important part of the pile leg structure of the jack up platform. Because of its complex structure, the flow field around the rack cylinder is different from that around the ordinary cylinder, which brings difficulties to the research of the rack cylinder. In this paper, using CFD(Computational Fluid Dynamics) solved the flow field of chords with different rack height and rack width under different KC and Re, the characteristics of the flow field around the cylinder with rack are obtained. The results show that Re, KC, rack height and rack width all have different effects on the flow field. When Re and KC are constant, Cd will increase with the increase of rack height ratio, the change of Cd and Cl is not significant, while the change of Cd and Cl varies with Re when the chord structure is fixed.

Single-atom Pd clusters anchored on t-BaTiO3 material was synthesized using hydrothermal and ultrasonic methods for the effective piezoelectric catalytic degradation of pollutants using vibration energy. XRD patterns of BaTiO3 loaded with monoatomic Pd were obtained before and after calcining, and showed typical cubic-phase BTO. TEM and HAADF-STEM images indicated single-atom Pd clusters were successfully introduced into the BaTiO3. The piezoelectric current density of the prepared Pd-BaTiO3 binary composite was significantly higher than that of the pristine BaTiO3. Under mechanical vibration, the nanomaterial exhibited a tetracycline decomposition rate of ~95 % within 7 h, which is much higher than the degradation rate of 56.7 % observed with pure BaTiO3. Many of the piezo-induced electrons escaped to the Pd-doped BaTiO3 interface because of Pd’s excellent conductivity. Single-atom Pd clusters help promote the separation of the piezo-induced electrons, thereby achieving synergistic catalysis. This work demonstrates the feasibility of combining ultrasonic technology with the piezoelectric effect and provides a promising strategy for the development of ultrasonic and piezoelectric materials.

Raman characteristics of various minerals constituting natural rocks collected from uranium deposits in Okcheon metamorphic zone in Korea are presented. Micro-Raman spectra were measured using a confocal Raman microscope (Renishaw in Via Basis). The focal length of the spectrometer was 250 mm, and a 1800 lines/mm grating was installed. The outlet of the spectrometer was equipped with a CCD (1,024256 pixel) operating at -70°C. Three objective lenses were installed, and each magnification was 10, 50, and 100 times. The diameter of the laser beam passing through the objective lens and incident on the sample surface was approximately 2 m. The laser beam power at 532 nm was 1.6 mW on the sample surface. Raman signal scattered backward from the sample surface was transmitted to the spectrometer through the same objective lens. To accurately determine the Raman peak position of the sample, a Raman peak at 520.5 cm-1 measured on a silicon wafer was used as a reference position. Since quartz, calcite, and muscovite minerals are widely distributed throughout the rock, it is easy to observe with an optical microscope, so there is no difficulty in measuring the Raman spectrum. However, it is difficult to identify the uraninite scattered in micrometer sizes only with a Raman microscope. In this case, the location of uraninite was first confirmed using SEM-EDS, and then the sample was transferred to the Raman microscope to measure the Raman spectrum. In particular, a qualitative analysis of the oxidation and lattice conditions of natural uraninite was attempted by comparing the Raman properties of a micrometer-sized natural uraninite and a laboratory-synthesized UO2 pellet. Significantly different T2g/2LO Raman intensity ratio was observed in the two samples, which indicates that there are defects in the lattice structure of natural uraninite. In addition, no uranyl mineral phases were observed due to the deterioration of natural uraninite. This result suggests that the uranium deposit is maintained in a reduced state. Rutile is also scattered in micrometer-sizes, similar to uraninite. The Raman spectrum of rutile is similar in shape to that of uraninite, making them confused. The Raman spectral differences between these two minerals were compared in detail.

Graphene-based sensors have emerged as significant tools for biosensing applications due to their unique electrical, mechanical, and thermal properties. In this study, we have developed an innovative and sensitive aptasensor based on the surfacemodified graphene for the detection of lung cancer biomarker CA125. The sensor leverages the combination of graphene surface and gold nanoparticles (AuNPs) electrodeposition to achieve a high level of sensitivity and selectivity for the biomarker detection. A noticeable decrease in electron transfer resistance was observed upon the AuNPs deposition, demonstrating the enhancement of electrochemical performance. Our experimental findings showed a strong linear relationship between the sensor response and CA125 concentrations, ranging from 0.2 to 15.0 ng/mL, with a detection limit of 0.085 ng/ mL. This study presents a novel approach to lung cancer detection, surpassing the traditional methods in terms of invasiveness, cost, and accuracy. The results from this work could pave the way for the development of graphene-based sensors in various other biosensing applications.

Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H2) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO4) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO4 had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec-1 at a current density of 10 mA cm-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.

Non-fungible tokens (NFTs) exploded onto the global digital landscape in 2020, spurred by pandemic-related lockdowns and government stimulus (Ossinger, 2021). An NFT is a unit of data stored on a blockchain that represents or authenticates digital or physical items (Nadini, 2021). Since it resides on a blockchain, NFTs carry the benefits of decentralization, anti-tampering, and traceability (Joy et al., 2022). Fashion brands quickly capitalized on these features, launching fashion NFT collections and garnering significant profits from the sale of fashion NFTs in 2021 (Zhao, 2021). For example, Nike’s December 2021 acquisition of RTFKT (pronounced “artifact”) resulted in USD 185 million in sales less than a year after their acquisition (Marr, 2022).

Destination branding has become an important trend in modern tourism. The development of destination brands has become a strategic tool worldwide because of the growing competition between destinations. In recent years, many tourist destinations have combined unique, creative, and attractive elements to transform themselves into “cool” tourist destinations. Destination brand coolness refers to tourists’ subjective and positive perception of tourist destinations and their beliefs that the destination brand offer distinctive, novel characteristics and attributes that the visitors are attracted to. Creating destination brand coolness can help tourist destinations differentiate themselves from their competitive counterparts, thereby attracting tourists. However, no study has conceptualized the construct of destination brand coolness, let alone developing scales that measure destination brand coolness.

Developing the high-performance semiconductor photocatalytic materials is an eternal topic under the background of the current energy and environment requirements. In recent years, single-atom photocatalysts (SAPCs) have been brought a lot of attention in energy conversion and environmental purification because of their unique characteristics and properties, including the unique coordination patterns, outstanding atomic utilization, quantum confinement effects, high catalytic activity, etc. Hence, this critical review focuses on the summarized various synthetic methods and the recent important applications of SAPCs, including photocatalytic H2 evolution (PHE) from water splitting, photocatalytic CO2 reduction, photodegradation of organic pollutants, etc. The prospects and challenges for future research topics of SAPCs with excellent activity and stability for various photocatalytic applications are prospected at the end of this review. We sincerely expect that this critical review can promote deep-level insight into the SAPCs subject for the future significant applications in other fields.