The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

A facile and efficient method was developed to prepare highly stretchable and conductive graphene conductors with wrinkled structures by the mechanical stretching and shrinking of elastomeric substrates, in which graphene inks were printed on a prestretched elastomeric substrate. Stretchable and exfoliated graphene inks were prepared by mixing graphite and Ecoflex in a shear-assisted fluid dynamics reactor. The resultant graphene conductor exhibited excellent stretchability at 150% strain and high electrical conductivity of 64 ± 1.2 S m− 1. The resistance of the conductor did not change in bent, twisted, and stretched states. The resistance did not change during 10,000 cycles of stretching/releasing, with a maximum strain of 150%. Based on the graphene conductor, a stretchable conductometric sensor with a two-electrode configuration was fabricated to measure impedance changes at different concentrations of electrolyte ions. This sensor exhibited a good and linear sensitivity curve (298.61 Ω mM− 1, R2 = 0.999) in bent and stretched states.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

수국은 수국과(Hydrnageaceae) 수국속(Hydrangea)에 속하는 낙엽관목 식물로 크고 화려한 화색과 화형을 가져 절화, 분화 뿐만 아니라 정원용으로도 전세계적으로 인기있는 식물이다. 본 연구는 SSR 마커를 이용하여 교배에 사용된 5가지 수국 품종에 대한 유전적 유연관계를 조사하고 교배 조합 별 종자의 형성과 발아율을 조사하여 품종간 화합성과 불화합성을 확인, F1의 화서와 잎 모양의 유전 양상을 조사하기 위해 수행 하였다. 군집분석 결과 Hydrangea macrophylla와 H. serrata 로 크게 두가지 그룹으로 나뉘었고 교배결과 종내 교배와 H. macrophylla를 모본으로 종간 교배를 했을 때 획득 자손의 수에 차이가 거의 없어 두 종간 친화성이 확인되었다. 자가 수 분을 통한 종자형성은 어렵거나 생기더라도 발아가 되지 않아 자가불화합성이 있는 것으로 확인되었다. 또, 2018년 H. macrophylla와 H. serrata를 교배에 사용하여 총 9개 교배조 합을 통해 1,807개의 F1을 얻었고 교배 조합들 간 자손을 이용하여 화서의 유전 양상과 화서에 따른 잎의 형태를 조사하여 화서와 잎 모양의 관계를 보았다. 그 결과, 모본 또는 부본에 편평형이 있다면 F1 전체 편평형의 화서 유형을 보였다. 화서 모양이 원형인 자손은 원형 화서 끼리의 교배를 통해서만 얻었다. 또, 원형의 자손의 잎은 전체적으로 엽폭과 엽장이 비슷 한 원형에 가까웠고, 편평형 자손들의 잎 모양은 엽장이 엽폭 보다 큰 길쭉한 타원형에 가까웠다. 그 중, 편평형과 원형의 혼합 교배를 통해 얻어진 F1 자손들에서는 잎의 모양이 원형 과 타원형의 중간형태임을 확인하였다. 이를 통해, 화서의 형 태는 단일 유전자에 의한 우성 열성 유전임을 확인하였고 잎은 화서 유형과 연관되어 있으며 중간 유전 형태임을 확인하 였다. 본 연구결과는 수국의 유전 육종에 관한 기초자료로써 교배 조합 작성 단계 또는 1년생 실생의 잎 모양을 통한 빠른 화서 모양 선발과 분리가 가능하여 육종 기간 단축을 기대할 수 있을 것이다.

본 연구는 실제 대인관계에서 형성된 관계의 친밀감이 게임 플레이 시 플레이어의 게임 및 사용자 경험에 영향을 줄 것이라 보았다. 그러나 사회적 관계 정도에 따른 게임 사용자 경험에 차이가 있음에도 불구하고 지금까지의 선행 연구에서는 게임 플레이어의 사회적 네트워크나 팀워크에 대해 분석한 연구는 매우 드물다. 따라서 본 연구는 모바일 전략 게임 내에서 플레이어 간의 사회적 관계 정도가 게임에 대한 협동심, 만족, 이용의도에 미치는 효과를 검증하기 위해 모바일 게임 앱 플레이테스트 실험처치 방법론을 통해 분석하였다. 또한 사회적 관계에 따른 효과의 차이를 순수하게 알아보기 위해 참여자의 게임 몰입(Flow)을 공변량(Covariance)으로 하여 공분산분석(ANCOVA)을 실시하였다. 본 연구는 실시간 전략 게임인 ‘클랜시 오브 로얄' 게임 앱을 이용하여 진행되었다. 연구결과, 사회적 관계가 높을수록 게임에 대한 협동심과 만족은 높아지는 것으로 나타났다. 이러한 본연구의 결과는 모바일 게임 기획 시 플레이어의 인적 네트워크와 게임 진행 방식에 대한 이론적, 실무적 함의를 갖는다.

Pleurotus eryngii is one of the most commercially important mushrooms cultivated in Korea. However, the shelf-life of the fruiting body is short, limiting its export. A new hybrid strain H17 of P. eryngii was developed to extend the shelf-life by mono-mono crossing between monokaryotic strains derived from DanBi and KNR2774. Although the cultivation period of H17 was slightly longer than that of the reference cultivar Kenneutari No.2, the quality did not change and remained normal after a period of 65.0 days at 4°C. This result was significantly different from that of the reference cultivar Kenneutari No.2. Analysis of the genetic characteristics of the new hybrid strain H17 revealed a different profile from that of the parental and reference cultivars when random amplification of polymorphic DNA (RAPD) primers was used. These results demonstrate that H17 is a new cultivar with improved storability after harvesting.

Cumulative effects are defined as the joint and aggregated effects of many factors and processes. Their consideration in landscape and environmental assessments are integral at both the project and strategic level, and they can help to bridge the different spatial and temporal scales. The primary challenge of conducting cumulative effect assessments (CEAs) is the difficulty in understanding the complicated nature of cumulative effects. We used three criteria for a systematic understanding of the barriers to addressing cumulative effects that are critical for improving knowledge systems for sustainable development and environmental assessment: salience, credibility, and legitimacy, and analyzed three cases through a variety of studies and resources: the Middle Humber in the U.K., the Transboundary Crown of the Continent in the U.S. and Canada, and the Great Sandhills in Canada, to understand how CEAs have been applied and obstructed in terms of the three criteria. In addition, a series of focus group interviews with experts and practitioners were performed to illuminate the critical barriers based on the criteria for addressing CEA in the context of South Korea. Based on the lessons, we suggest several key strategies such as securing a cooperative consulting process, and active and transparent partnerships; using a strategic environmental assessment as a framework; understanding and incorporating stakeholder knowledge; using advanced computer modeling and simulation techniques including effective visualization tools; and preparing a simple model design and understandable scientific information.

Edible biopolymer films were developed from the exopolysaccharides (EPS) extracted from Weissella confusa 113-2. The optimum composition for film formation was determined using the response surface analysis with the explanatory variables of the EPS (0.5-5.5%) and glycerol (0.5-5.5%) concentrations and the response variable of film elastic modulus (EM). The mass ratio of distilled water to solids was set constant (14:1). Tensile strength (TS), percentage elongation at break (%E), EM, water vapor permeability (WVP) of EPS films were evaluated. The glass transition temperatures of the films were also determined by a dynamic mechanical analysis. The optimum mass ratio of EPS to glycerol was 0.754:0.375. The WVP, TS, %E, and EM of the film under the optimal composition were 3.53±0.21 g·mm/kPa·h·m2, 7.03±0.49 MPa, 84.82±12.31%, and 62.03±6.93 MPa, respectively. The glass transition temperature varied from 54 to 83 °C. The EPS film has the potential to be applied to food products as an edible film with physical and barrier properties comparable to other biopolymer edible films.

The purpose of this study was to investigate the effect of heel off stairway walking exercise on the increase of muscle activity and balance activity of the ankle joint muscles in university students with functional ankle instability. The conservative treatment for the control group consisted of stairway walking (n=10) and the experimental group consisted of heel off stairway walking (n=11). The therapeutic intervention of the control and experimental groups was performed a total of 12 exercise sessions, 3 times per week for 4 weeks. To compare the two groups, the level of ankle disability was assessed by using the EMG, BT4 and Pedoscan in pre-treatment and post-treatment. Muscle activity increased in both the experimental groups and control groups in each group, however there was no significant difference between the groups. Balance ability did not show any significant difference. This study demonstrates that heel-off stairway walking is effective in significantly increasing muscle activity, however did not significantly improve balance ability.

In a previous study, it was reported that enzymatic hydrolysis under pressurization could be a new method which could produce arginine dipeptide and free amino acid in anchovy hydrolysate as salty enhancer at optimal condition. Powder is more efficient than liquid in terms of transport and storage stability. For the purpose of producing spray dried powder of various salt contents was investigated the effect of different salt concentration of anchovy hydrolysate on spray dried powder properties. The anchovy hydrolysate of various salt contents(in the range of approximately 0.7- 19.8% w/w) prepared adding the fish sauce (Dae-Young fish market) at inlet drying air temperatures of 120°C and 140°C. The process yield and physicochemical properties such as moisture content, bulk density, hygroscopicity and the morphology (EDS, XPS, XRD) of the anchovy hydrolysate powder was measured. The glass transition temperatures (Tg) of the powders equilibrated under various water activities were determined using a differential scanning calorimeter (DSC). Different drying conditions and salt concentration could generate anchovy hydrolysate powders with different process yield, bulk density and moisture content. The spray-dried anchovy hydrolysate powder was confirmed by XRD to be a mixture of an amorphous substances and crystalline salts. The energy dispersive X-ray spectrometer (EDS) and X-Ray Photoelectron Spectroscopy (XPS) analysis demonstrated that the surface NaCl concentration of the powders increased with an increasing drying air temperature. Increasing moisture adsorption of the anchovy hydrolysate powders resulted in a Tg reduction. It is suggested that producing spray dried anchovy hydrolysate for the industrial use is the use of the feed salt concentration of not lower than % w/w and inlet air temperature at 120°C, 140°C