Air conditioning facilities in nuclear power plants use pre-filters, HEPA filters, activated carbon filters, and bag filters to remove radionuclides and other harmful substances in the atmosphere. Spent filters generate more than 100 drums per year per a nuclear power plant and are stored in temporary radioactive waste storage. Plasma torch melting technology is a method that can dramatically reduce volume by burning and melting combustible, non-flammable, and mixed wastes using plasma jet heat sources of 1,600°C or higher and arc Joule heat using electric energy, which is clean energy. KHNP CRI & KPS are developing and improving waste treatment technology using MW-class plasma torch melting facilities to stably treat and reduce the volume of radioactive waste. This study aims to develop an operation process to reduce the volume of bag filter waste generated from the air conditioning system of nuclear power plants using plasma torch melting technology, and to stably treat and dispose of it. It is expected to secure stability and reduce treatment costs of regularly generated filter waste treatment, and contribute to the export of radioactive waste treatment technology by upgrading plasma torch melting technology in the future.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

The fuel fabrication facility has been built and is being operated by KAERI since licensing research reactor fuel fabrication in 2004. After almost 20 years of operation, outdated equipment for fabrication or inspection has been replaced by automated, digitalized ones to assure a higher quality of nuclear fuels. However, the generation of a large amount of radioactive waste is another concern for the replacement in terms of its volume and various types of it that should be categorized before disposal. The regulatory body, NSSC (Nuclear Safety and Security Commission) released a notice related to the classification of radioactive wastes, and most accessory equipment can be classified into the clearance levels, called self-disposal waste. In this study, the practice of self-disposal of metal radioactive waste is carried out to reduce its volume and downgrade its radioactivity. For metal radioactive waste, which is expected to occupy the most amount, analysis status and legal limitations were performed as follows: First, the disposal plan was established after an investigation of the use history for equipment. Second, those were classified by types of materials, and their surface radio-contamination was measured for checking self-disposable or not. After collecting data, the plan for the self-disposal was written and submitted to the Korea Institute of Nuclear Safety (KINS) for approval.

In the design of a spent-fuel (SF) storage, the consideration of burnup credit brings the benefits in safety and economic views. According to it, various SF burnup measurement systems have been developed to estimate high fidelity burnup credit, such as FORK and SMOPY. Recently, there are a few attempts to localize the SF burnup measurement system in South Korea. For the localization of SF burnup measurement systems, it is very important to build the isotope inventory data base (DB) of various kinds of SFs. In this study, we performed DeCART2D/MASTER core follow calculations and McCARD single fuel assembly (FA) burnup analyses for Hanbit unit 3 and confirmed the characteristic of the isotope inventory over burnup. Firstly, the core follow calculations for Cycles 1~7 were performed using DeCART2D/MASTER code system. The core follow calculation is very realistic and practical because it considers the design conditions from its nuclear design report (NDR). Secondly, the Monte Carlo burnup analyses for single FAs were conducted by the McCARD Monte Carlo (MC) transport code. The McCARD code can utilize continuous energy cross section library and treat complex geometric information for particle transport simulation. Accordingly, the McCARD code can provide accurate solutions for burnup analyses without approximations, but it needs huge computing resources and time burden to perform whole-core follow calculations. Therefore, we will confirm the effectiveness of the single McCARD FA burnup analyses by comparing the DeCART2D/MASTER core follow results with the McCARD solution. From the results, the use of single FA burnup analyses for the establishment of the DBs will be justified. Various FAs, that have different 235U enrichments and loading pattern of fuel rods and burnable absorbers, were considered for the burnup analyses. In addition, the results of the sensitivity analyses for power density, initial enrichment, and cooling time will be presented.

Minuartia laricina (L.) Mattf. is a Korean native plant with high potential as a commercial flowering potted plant due to its compactness and long flowering duration. However, because this plant is a groundcover, it is susceptible to lodging and leggy growth. Therefore, this study investigated the effects of plant growth retardants (PGRs) on the inhibition of stem elongation and flowering characteristics of M. laricina. Commercial products, Trimmit, Cycocel, and B-Nine, were used for the exogenous PGR application of paclobutrazol (PBZ), chlormequat chloride (CCC), and daminozide (DMZ), respectively. Application concentrations were 50 and 100 mg·L-1 for PBZ; 100, 500, and 1,000 mg･L-1 for CCC; and 500, 1,000, and 2,000 mg·L-1 for DMZ. Paclobutrazol was the only PGR that inhibited stem elongation. The stem lengths of the plants treated with 50 or 100 mg·L-1 PBZ were 2.2 cm (13%) or 9.8 cm (57%) shorter, respectively, than those of the control. 50 mg·L-1 PBZ retarded stem growth effectively without negatively affecting flowering or other growth parameters, whereas 100 mg·L-1 PBZ caused excessive dwarfing and significantly reduced flowering by 59%. CCC and DMZ applications were ineffective for growth control. Flowering time was accelerated with most PGRs, except for 2,000 mg·L-1 DMZ, reducing the time to flowering by 2–8 days. These results indicate that the stem growth of M. laricina was successfully inhibited with PBZ but not with CCC or DMZ. Thus, we concluded that a single application of 50 mg·L-1 PBZ or similar treatment is effective in miniaturizing M. laricina without causing harm to its growth or aesthetic value, such as the flower number. Additionally, because CCC and DMZ are not persistent in the growing medium, testing multiple application times for these PGRs is crucial.

In Korea livestock farms breeding cattle have been suffering from re-emerging problems of Brucella (B.) abortus infection while steady decline of bovine brucellosis. Therefore, this study underscored the identification and association of etiological agent of brucellosis in cattle in South Korea. The incidence of brucellosis in cattle was analyzed by bacteriological and molecular methods in 187 brucellosis-suspicious farms of 11 regions between 2018 and 2020. Brucella isolates from various specimens were identified by Brucella-specific multiplex PCR. Epidemiological data were collected by local official veterinarians through history taking from farmers and animal data systems. In 230 of 560 cattle (40.9%) and 94 of 187 farms (50.3%), a total of 313 B. abortus were isolated from various specimens, the majority of isolates were from supramammary lymph node (41%). In epidemiological findings, the majority of positive cases were mainly caused by resurgence (43.7%) and unknown (37.2%). Of 94 positive cases isolated B. abortus, abortion in cattle infected by B. abortus occurred in 51 farms (54.3%) where led to resurgence in 30 farms and environmental survival of B. abortus in 9 farms. Consequently, these findings revealed the existence of etiological agent of bovine brucellosis in Korea, which still occurred at low levels in distinct regions where are allowed to call for persistent biosecurity. Thus, we highlight that brucellosis in Korea needs to take more effective control strategies with potential evidence. Moreover it is ultimately important to maintain a constant monitoring for eradication of brucellosis.

본 연구는 한국근로자를 대상으로 하여 성장욕구가 직무열의와 직무탈진에 영향을 미치는지 조사하였 다. 이와 더불어 부정적 정서조절과 내적 동기가 이들 변수 간의 관계에 영향을 미치는지에 대해서도 검증하였다. 본 연구를 위해 한국의 제조기업에 근무하는 244명의 근로자에게 자기보고식 설문조사를 실시 하였다. 연구결과, 직무열의와 직무탈진에 대한 성장욕구의 직접 효과는 없는 것으로 나타났다. 그러나 이들 변수들 간의 관계는 부정적 정서조절과 내적 동기의 매개역할에 의해 강화되는 것으로 나타났다. 즉 성장욕구와 직무열의의 관계에 대해 부정적 정서조절과 내적 동기는 매개효과를 가졌으며, 성장욕구와 직무탈진의 관계에 부정적 정서조절이 매개효과를 가졌다. 이 결과를 통해 본 연구는 성장욕구와 직무 열의, 직무탈진의 관계에 대한 부정적 정서조절 및 내적 동기와 같은 심리적 특성의 중요성을 확인하였다.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.

Cryopreservation of boar semen is continually researched in reproductive technologies and genetic resource banking in breed conservation. For evaluating the boar semen quality, sperm motility (MOT) is an important parameter because the movement of spermatozoa indicates active metabolism, membrane integrity and fertilizing capacity. Recently, polymorphisms reported to be significant association with sperm MOT. This study was conducted to evaluate the SNP in the coding region of ESR1 (g.672C>T inexon 1) as a positional controlling for motility and kinematic characteristics of post-thawed boar semen. To results,The g.672C>T was significantly associated with frozen semen motility and kinematic characteristics. g.158 T>C SNP was high significantly associated with MOT, VCL, VSL and VAP Also, the SNP was low significantly associated with ALH.Therefore, we suggest that theSNP in the coding region of ESR1 (g.672C>T in exon 1) may be used as a molecular marker for Duroc boar Post-thawed semen quality.

Estrogen receptor 2 (ESR2) is involved in oestrogen-related apoptosis in cell cycle spermatogenesis but their effects have not yet confirmed in pig. Therefore, this study was performed to investigatetheir association with semen motility and kinematic characteristics. DNA samples from 126 Duroc pigs with records of sperm motility and kinematic characteristics [Total motile spermatozoa (MOT), Curvilinear velocity(VCL), Straight-line velocity(VSL), the ratio between VSL and VCL(LIN), Amplitude of Lateral Head displacement(ALH)] were used in present study. A single nucleotide polymorphism (g.35547A>G) was associated with MOT, VCL, VAP and ALH in Duroc population (p < 0.05). Therefore, we suggest that the porcine ESR2 may be used as a molecular marker for Duroc boar semen quality, although its functional effect was not clear yet. These results will improve the understanding of the functions of the ESR2 in spermatogenesis within the reproductive tracts, and will shed light on ESR2 as a candidate gene in the selection of good sperm quality boars.

An efficient method for in vitro propagation and growth of the wild garlic(Allium ochotense Prokh.) was established. Bulbs of wild garlic were collected from Ullung Island, Korea, and the growth pattern of plantlets on various culture media was observed. High growth of shoot was obtained on LP, NN and N6 medium. The growth media supplemented with 3%(w/v) sucrose was found optimal for shoot growth. After 10 weeks multiple shoots were observed in the plantlets growing on the medium containing 1.0 mg/l of zeatine and 0.1 mg/l NAA. Roots were induced directly at the base of the shoot in all treatments. The medium with 2.0 mg/l of IBA proved to be the best rooting medium. The studies of this kind may be used to develop strategies for large-scale propagation of elite wild garlic.

Hypocreales entomopathogenic Beauveria bassiana and Metarhizium anisopliae are well-known biological control agents worldwide and have high potential in industrialization. However their thermo-susceptibility limits long-term storage under high temperature conditions and high insecticidal activity after application to target pests. Herein we isolated highly virulent isolates, B. bassiana JEF006 and JEF007 and M. anisopliae JEF003 and 004, and produced in three grains, as substrates for solid cultures, followed by thermotolerance assays to compare the potential of the three substrates. The JEF isolates were exposed to dry and wet heat at 50°C and overall conidia were more stable under dry heat condition rather than wet heat. Of the three grains, Italian millet was superior to the other grains in the production of thermotolerant conidia. Additionally Italian millet did not severely aggregated, which enabled air to penetrate into the substrate well compared to the sorghum and millet. JEF isolates were more thermotolerant when they were kept in oil conditions. The conidia of JEF 007 and 003 wild type and AtMT-based generating random mutants were subjected to SDS-PAGE. A significant relationship between conidial thermotoelrance and detected proteins was observed. This work suggests that Italian millet can be used as an effective substrate to produce more thermotolerant conidia, thus maintaining viability for long times under unfavorable environment and biological activity against target pests.

Entomopathogenic Beauveria bassiana and Metarhizium anisopliae are well-known biological control agents worldwide and have high potential in industrialization. However their thermo-susceptibility limits long-term storage under high temperature conditions and high insecticidal activity after application to target pests. Herein we isolated highly virulent isolates, B. bassiana JEF006 and JEF007 and M. anisopliae JEF003 and JEF004, and produced in three grains, such as sorghum, millet and Italian millet as substrates for solid cultures, followed by thermotolerance assays to compare the potential of the three substrates for thermotolerance. The JEF isolates were exposed to dry and wet heat at 50°C and overall conidia were more stable under dry heat condition rather than wet heat. Of the three grains, Italian millet was superior to the other grains in the production of thermotolerant conidia. Additionally Italian millet did not severely aggregated, which enabled air to penetrate into the substrate well compared to the sorghum and millet. JEF isolates were more thermotolerant when they were kept in oil conditions as carriers of an oil-based formulation. This work suggests that Italian millet can be used as an effective substrate to produce more thermotolerant conidia, thus maintaining viability for long times under unfavorable environment and biological activity against target pests.