This study examined the relationship between Body mass index (BMI) classification and the occurrence of dyslipidemia using 3 years of health examination data from a university hospital in Changwon, and seeked to find other factors that affect dyslipidemia. Multivariate logistic regression analysis investigated the most common risk factors for developing dyslipidemia and used Kaplan-Meier survival curves to predict the probability of developing dyslipidemia according to BMI class. We then analyzed the effects of metabolic indicators such as smoking habits, alcohol consumption, blood pressure, glucose, hemoglobin A1c (HbA1c), and insulin. The Type I error rate was controlled through Bonferroni correction for multiple comparisons to extract reliable statistical data. in the present study, these results showed that the probability of developing dyslipidemia was high in the obese group, and confirmed that lifestyle habits such as smoking and drinking were highly correlated with the occurrence of dyslipidemia. Therefore, we suggest that dyslipidemia management and prevention strategies require public health policies that comprehensively manage lifestyle factors such as gender and weight management, smoking cessation, and drinking habits.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

Chamaecyparis obtusa is one of the economical conifers planted in Korea due to its good quality timber and wood characteristics. Individuals of C. obtusa containing high terpenes (HT) and low terpenes (LT) were selected for by colorimetric method. The HT of C. obtusa was delayed in wilting against various abiotic stresses compared to the LT plants. The HT group exposed to UV did not significant influence the chlorophyll content, and the chlorophyll value was higher in the HT group than the LT group. Also, chilling treatment (5℃) did not significant influence on the chlorophyll content. However treatment at -4℃ showed relatively low chlorophyll content in the LT group than the HT group. Plants exposure to high temperature was not a difference between the HT and the LT group. However, treatment at 38℃ influenced the chlorophyll content that was increased exposure time-dependently. In salt treatments, chlorophyll in the HT group was lower at high concentrations (300 and 500 mM) of NaCl. However, chlorophyll content increased to slightly in treatment time-dependently, which is 6.7% to 40%. H2O2 treatment has been a negative effect on the chlorophyll content in the HT group. All concentration of H2O2 decreased the chlorophyll content of 5% to 35%. Plants containing high terpenoids were resisted against some abiotic stress such as salt and H2O2. Our results implied that terpenoids could cause various abiotic stress resistance. These results could be utilized for efficient management and biomass production during forest silvicultures.

Stem and root of elm trees have used as traditional medical materials, but there is little information on the distribution and resources of habitats. Korean native growing Ulmus spp. (U. davidiana var. Japonica, U. parvifolia, U. davidiana, and U. macrocarpa) genetic resources studied through The National Forest Inventory of Korea data and field survey. The distributions of U. davidiana var. japonica according to elevation distributed evenly. Both U. parvifolia and U. davidiana were inhabited mostly at less than 200 m of altitude. Each Ulmaceae species widely were distributed nationwide, but a dominant species was different depending on locals. It observed that Ulmaceae inhabits mainly in steep slopes of 31-45 degrees. Most of the habitats regenerated by natural seeding and the most abundant species were a codominant tree. Distribution of trees in U davidiana var. japonica was 7 m-13 m, and in young U. parvifolia and U. macrocarpa, more than 25% of young trees less than 7 m observed. The distribution of the diameter of breast height of the U. davidiana var. japonica was 46.4% for 11-20 cm, 52.6% for 11-20 cm in U. parvifolia. The average T/R ratio was 0.83, and the mean weight ratio of root bark was 62%. As the results of this study, the domestic Ulmaceae biomassare very small. It is difficult to harvest in that the habitat on the slope. Thus, it is too hard to develop functional materials using biomass at present. Therefore, it is necessary to develop technology for the selection and propagation of elite trees of Ulmaceae.

The ability of plants to endure environmental stress factors, which are going to be more severe due to global warming, is important especially for forest plants. Because obtain trait of resistance to temperature using conventional breeding for woody plants is a time consuming way. In this study, chloroplast-localized OsHSP26 gene was overexpressed in Populus alba L. to breed tolerant transgenic poplar to temperature stress. The plantlets of OsHSP26-overexpressed transgenic poplar showed more heathy phenotypic response than wild-type plants under both prolonged low- and high-temperature stress. While the SPAD value, which refers chlorophyll content, in wild-type plants decreased depending on the exposure time to the temperature stress, higher SPAD value were shown in the transgenic plants. The contents of total phenolic compounds in the transgenic plants were lower than those of the wild-type plants, and not significantly changed except in the treatment of prolonged low-temperature. However, the total flavonoids contents of the transgenic plants were dramatically increased under prolonged temperature stress. The DPPH scavenging activities of the transgenic plants were higher than those of the wild-type plants under temperature stress. Consequently, it was revealed that overexpressing OsHSP26 allow for P. alba to be tolerant to temperature stress.

Composite resins are developed as restorative materials to improve esthetics and mechanical properties. To improve the physical properties of resin material, resin filler have to be added. However, no imaging method is adopted for resin filler distribution. Optical coherence tomography (OCT) is a optical imaging technique to delineate microscopic structures within biological tissue. The OCT application to dental composites resin and its filler is not described yet. So, this new and advanced optical method is needed for clinical application for evaluation of dental composite resin. To analyze the spatial distribution of dental composite resin and to evaluate the resin restoration in cavity, frequency domain optical coherence tomography (FD-OCT) was used for their analysis. Resin restored tooth was prepared. For morphological observation, serially sectioned teeth, conventional X-ray taking and micro computed-tomography (CT) images were compared with OCT images. The experiment has done to evaluate the success of the resin restoration using 3 dimensional structure OCT image. In this research, OCT is evaluated as a new technique to image resin restoration. The evaluation of resin restored tooth was performed by OCT. Inappropriate restoration such as marginal adaptation, large porosities, internal integrity and poor contour could be detected. Resin filler also could be checked by OCT. The distribution, number, regularity and size of resin filler can be differentiated from several commercial products. Considering the characteristics of the OCT, it can be used to evaluate the defects of resin restoration, resin filler distribution, and internal integrity between resin material and tooth structure. The OCT can be considered to be a new and advanced method for the evaluation of resin restorations.

고무화합물 형태로 구성된 조영제의 병에 Syringe Connector의 Spike를 연결 시 고무의 찢김 정도를 알아보고 찢김 및 분쇄로 인한 합성고무의 혼입 유무와 분쇄된 합성고무가 검출 시 분쇄물의 크기를 실험을 통해 알아보고자 하였다. 그 결과 찢김 정도의 경우 Syringe Connector의 끝과 최초 접촉하는 앞면이 약 3.14±0.04 ㎜로 뒷면 보다 많이 찢겼으며, 실험 대상인 10 병의 조영제에서 평균 7 개에서 15 개로 모두 분쇄물이 검출되었다. 검출된 분쇄물을 이용하여 크기를 측정한 결과 평균크기는 약 7.89±0.31 ㎛이었다. 향 후 다양한 실험 및 분석방법을 통한 추가실험과 더불어 흡인된 분쇄물 차단을 위한 미세 필터타입 자동주입장치의 개발이 필요하며, 분쇄물 유입 시 치명적 사고를 대비하여 관련기관의 관심 또한 필요할 것으로 사료된다.

A double-cropping system with soybean (Glycine max) following the cultivation of potato, garlic, and onion is widely adopted in the southern region of Korea. For this system, marginal dates for planting must be determined for profitable soybean yields, because the decision to plant soybean as a second crop is occasionally delayed by harvest of the first crop and weather conditions. In order to investigate the effect of planting date on soybean yield, three cultivars (early and late maturity) were planted on seven different dates from May 1 to July 30 in both paddy and upland fields across 2012 and 2013. Soybean yields were significantly different among the planting dates and the cultivars; however, the interaction between cultivar and planting date was not significant. Based on linear regression, the maximum yield of soybean was reached with a June 10 planting date, with a sharp decline in yield for crops planted after this date. The results of this study were consistent with those of a previous one that recommends early and mid-June as the optimum planting period. Regardless of soybean ecotype, a reduction in yield of greater than 20% occurred when soybean was planted after mid-July. Frost during soybean growth can reduce yields, and the late maturity cultivars planted on July 30 were damaged by frost before completing maturation and harvest; however, early maturity cultivars were safely harvested. For sufficient time to develop and reach profitable yields, the planting of soybean before mid-July is recommended.

A 63-year-old woman with a history of nephrolithiasis and long-term hemodialysis (HD) presented with abdominal pain. Abdominal computed tomography (CT) showed urinoma induced by renal forniceal rupture, and three causative calculi. No active stone growth or new stones were observed when compared with previous CT, however, fragmentation and migration of an existing stone was observed. After ureteroscopic lithotripsy and stenting with a double-J catheter, the patient made a full recovery. To the best of our knowledge, this is the first case of spontaneous renal forniceal rupture in an anuric HD patient caused by calculi. Renal forniceal rupture can occur, even in anuric HD patients.

We report on a unique case of diffuse large B-cell lymphoma of the cecum, which presented as a subepithelial tumor. A 62- year-old woman with abdominal pain underwent a colonoscopy, resulting in detection of a subepithelial tumor measuring 2 cm in the cecum. We performed a right hemicolectomy with diagnostic and curative intent; histological examination and immunohistochemical staining of the resected tumor indicated a diagnosis of diffuse large B-cell lymphoma. The patient achieved complete remission with combination chemotherapy.

Spontaneous perirenal hematoma is an unusual but serious complication of tumors, vascular disease, ruptured cyst, or infection. The authors report the case of a diabetic patient who presented with spontaneous perirenal hematoma and who was subsequently diagnosed to have emphysematous pyelonephritis.