Lumpy Skin Disease (LSD) and Foot-and-Mouth Disease (FMD) cause substantial economic losses on the livestock industry. Therefore, vaccinations have been implemented as the control strategy in endemic countries. However, the potential adverse effects of administering vaccines for both diseases simultaneously have not been thoroughly evaluated. The aim of this study was to assess the impact of vaccinating dairy cows with either or both LSD and FMD vaccines on milk production and physiological parameters such as milk temperature, rumination time and body weight. The experimental groups were divided into four according to the injection materials: 1) saline, 2) LSD vaccine, 3) FMD vaccine, and 4) both vaccines. The impact of vaccination on milk yield and physiological parameters was evaluated daily until 12 days post-vaccination, and milk components were analyzed twice, once per week. Among the experimental groups as well as each vaccine group, no statistically significant differences (p < 0.05) were observed at milk yield, milk components, or milk temperature. This suggests that simultaneous vaccination of LSD and FMD can be administered without adverse effects.

발효 느타리버섯재배부산물을 급이한 흰점박이꽃무지 유충의 영양성과 안전성을 검증하고자 참나무 발효톱밥으로 사육한 유충의 영양성분 과 유해물질을 비교분석하였다. 조단백질 함량은 발효 느타리버섯재배부산물을 급이한 유충(OMCB)에서 54.0%로 참나무 발효톱밥을 급이한 유 충(FOS) 47.2%보다 1.1배 많았다. 필수아미노산 중 류신은 OMCB에서 2.8%로 가장 높았고, FOS에서는 2.7%로 비슷한 수치였다. 비필수아미 노산은 OMCB에서 프롤린의 함량이 7.2%로 가장 높았고 FOS (5.6%)보다 1.3배 더 높았다. 무기질 중 칼륨은 OMCB (2771.2 mg/100 g)와 FOS (2765.0 mg/100 g)에서 비슷한 수치였고, 불포화지방산 중 올레산은 OMCB (58.2%)와 FOS (59.6%)에서 가장 높은 함량을 나타냈다. 유 해물질 분석 결과, OMCB와 FOS에서 납, 카드뮴, 비소 모두 식용곤충 중금속 기준에 적합하였고, 식중독균에 속하는 대장균과 살모넬라균은 모두 불검출되었다. 위 연구 결과에 따르면, 발효 느타리버섯재배부산물 급이 흰점박이꽃무지 유충은 단백질과 불포화지방산뿐만 아니라 다양한 영양성 분을 포함하고 있으며, 안전성 또한 검증되었으므로 식용으로 활용하기에 적합할 것으로 판단된다.

The AlSi10Mg alloy has garnered significant attention for its application in laser powder bed fusion (L-PBF), due to its lightweight properties and good printability using L-PBF. However, the low production speed of the L-PBF process is the main bottleneck in the industrial commercialization of L-PBF AlSi10Mg alloy parts. Furthermore, while L-PBF AlSi10Mg alloy exhibits excellent mechanical properties, the properties are often over-specified compared to the target properties of parts traditionally fabricated by casting. To accelerate production speed in L-PBF, this study investigated the effects of process parameters on the build rate and mechanical properties of the AlSi10Mg alloy. Guidelines are proposed for high-speed additive manufacturing of the AlSi10Mg alloy for use in automotive parts. The results show a significant increase in the build rate, exceeding the conventional build rate by a factor of 3.6 times or more, while the L-PBF AlSi10Mg alloy met the specifications for automotive prototype parts. This strategy can be expected to offer significant cost advantages while maintaining acceptable mechanical properties of topology-optimized parts used in the automobile industry.

The emergence of ferrous-medium entropy alloys (FeMEAs) with excellent tensile properties represents a potential direction for designing alloys based on metastable engineering. In this study, an FeMEA is successfully fabricated using laser powder bed fusion (LPBF), a metal additive manufacturing technology. Tensile tests are conducted on the LPBF-processed FeMEA at room temperature and cryogenic temperatures (77 K). At 77 K, the LPBF-processed FeMEA exhibits high yield strength and excellent ultimate tensile strength through active deformation-induced martensitic transformation. Furthermore, due to the low stability of the face-centered cubic (FCC) phase of the LPBFprocessed FeMEA based on nano-scale solute heterogeneity, stress-induced martensitic transformation occurs, accompanied by the appearance of a yield point phenomenon during cryogenic tensile deformation. This study elucidates the origin of the yield point phenomenon and deformation behavior of the FeMEA at 77 K.

현대 사회에서 첨단 기술의 발전은 예술의 양상을 빠르게 변화시키고 있다. 생성형 인공지능 기술의 발전은 인류의 전유물이라 여겨왔던 창작 행위에 기존에는 보지 못했던 색다른 표현을 제공했다. 또한, 전통적 기법 을 고수하던 예술인들에게 새로운 예술 창작의 발현 방식을 제시하였다. 하지만 나날이 발전하는 인공지능 기술에 비해, 이를 활용한 구체적인 미디어아트 제작 과정 연구는 아직 국내에서는 미비하다. 본 논문은 인 공지능 기술을 활용한 미디어아트 해외 사례를 탐구한다. 그리고 Text-to-Image 인공지능 생성 모델과 게임 엔진 Unreal Engine 5를 이용하여, 국내에 자리 잡지 않은 생성형 인공지능을 활용한 작품 제작 방법론과 창 작자들에게 인공지능 이미지 생성 모델의 확장성을 제시한다.

Repetitive or excessive exposure to ultraviolet (UV) radiation causes oxidative stress-mediated skin photoaging through the overproduction of reactive oxygen species. Actinidia polygama is known as a medical plant used in oriental medicine for treating several diseases such as abdominal pain, stroke and rheumatoid arthritis. Recently, it was reported that A. polygama extract had anti-wrinkle and skin hydrating properties in ultraviolet B (UVB)-exposed hairless mice. However, the molecular biological mechanism of this extract on alleviating skin photoaging is still unknown. Therefore, we investigated the anti-photoaging effects of PB203, which is the powder of A. polygama extract, in the in vivo and in vitro photoaging models. First, PB203 showed 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activities due to the presence of anti-oxidant components including flavonoids and polyphenols. In UVB-irradiated hairless mice, oral administration of PB203 (100 mg/ kg) significantly improved wrinkle formation, skin dehydration, elasticity and skin barrier function by decreasing the levels of matrix metalloproteinases (MMPs) and increasing those of collagen I, filaggrin, involucrin and loricrin. Especially, the reduced production of p-p38, p-c-Jun and p-c-Fos by PB203 reversed the elevated levels of MMPs mediated by UVB exposure, resulting in the upregulation of collagen I expression. Consistent with these animal data, PB203 remarkably enhanced the mRNA expression of collagen I, filaggrin, involucrin and loricrin, while suppressed that of MMPs in UVB-irradiated HaCaT cells. And PB203 increased the wound recovery rate of cells by promoting their proliferation and migration. Moreover, PB203 significantly recovered the activity of superoxide dismutase inhibited by UVB in both mice and cells. In conclusion, PB203, which protects skin from UVB-induced photodamage by exerting antioxidant properties, can be considered to have sufficient potential as a functional ingredient or therapeutic agent improving skin photoaging and related skin symptoms.

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

Using data from flies collected with pitfall traps in 365 forests on a nationwide scale in Korea, the abundance and distribution changes of two families (Phoridae and Lauxaniidae) in Korean forests were predicted at the genus level according to two climate change scenarios: RCP 4.5 and RCP 8.5. The most suitable temperature for the 17 major genera was estimated using a weighted average regression model. Stichillus and Anevrina displayed the lowest optimum temperature with 7.6℃ and 8.5℃ in annual mean temperature, respectively, whereas Chonocephalus had the highest optimum temperature with 12.1℃. Among thirty genera, seven genera (four from Phoridae and three from Lauxaniidae), which showed their abundance in a bell-type or linear pattern along the temperature gradient, were used for predicting the distribution changes according to the future climate change scenarios. All the taxa of this study are expected to decrease in abundance and distribution as a function of temperature increase. Moreover, cold-adapted taxa were found to be more affected than warmadapted taxa.

Royal jelly (RJ) is a well-known functional and medicinal food for human health promotion. Major royal jelly proteins (MRJPs), which are the major protein components in RJ, exhibit antimicrobial activities. However, the identities of the MRJPs of RJ responsible for its antioxidant effects have remained unclear. Here, we report that honeybee (Apis cerana) MRJP 2 (AcMRJP2) acts as an antimicrobial and antioxidant agent in RJ. Using recombinant AcMRJP2, which was produced in baculovirus-infected insect cells, we established the antimicrobial and antioxidant roles of MRJP 2. AcMRJP2 bound to the surfaces of bacteria, fungi, and yeast, which then induced structural damage in the microbial cell walls and led to a broad spectrum of antimicrobial activities. AcMRJP2 protected mammalian and insect cells via the direct shielding of the cell against oxidative stress, which led to reduced levels of caspase-3 activity and oxidative stress-induced cell apoptosis, followed by increased cell viability. Moreover, AcMRJP2 exhibited DNA protection activity against reactive oxygen species (ROS). Our data indicate that AcMRJP2 could play a crucial role as an antimicrobial agent and antioxidant in RJ, suggesting that MRJP 2 is a component responsible for the antimicrobial and antioxidant activities of RJ.

Major royal jelly proteins (MRJPs), important protein components of bee royal jelly (RJ) and exclusive nourishments for queen, exhibit various biological and pharmacological activities. RJ is one of the most studied bee products, but the crucial roles for MRJP2 as an antimicrobial and antioxidant agents remain largely unknown. Here we demonstrated the antimicrobial and antioxidant functions of the Asiatic honeybee (Apis cerna) MRJP2 (AcMRJP2). Recombinant AcMRJP2 of approximately 53 kDa was expressed in baculovirus-infected insect cells, and it exhibited antimicrobial activity against bacteria, fungi, and yeast via binding to microbial surfaces and inducing structural damage in microbial cell walls. AcMRJP2 protected mammalian and insect cells against oxidative damage through shielding of cell membranes. Interestingly, AcMRJP2 exhibited DNA protection activity and DPPH radical-scavenging activity. Altogether, our data demonstrated that AcMRJP2 functions as antimicrobial and antioxidant agents.

The entomopathogenic fungus Metarhizium anisopliae B is a powerful biological control agent against Monochamusalternatus, a crucial mediator of the pinewood nematode Bursaphelenchus xylophilus. In this study, production of destruxins(dtxs), insecticidal cyclic hexadepsipeptides, was monitored in the submerged culture of M. anisopliae B. Three typesof dtxs, i.e., destruxin A, B, and E, were produced during the culture. Among the three dtxs, the production yield ofdestruxin A was best, followed by destruxin B and E. Destruxin A production was increased when pH was controlledat 6.0, whereas production of destruxin E was not affected by the pH control. The highest yield of dtxs A, B, and Ewere 16.4, 7.3, and 6.1 mg L-1, respectively. Considering that process for dtxs production has not been optimized, M.anisopliae B has more powerful implication as a biocontrol agent.