A nanocomposite consisting of Fe3O4 and MWCNT was produced via sol-gel technique using FeCl3 along with MWCNT by calcination at 300℃. The degradation effect of rhodamine B dye has been investigated under UV illumination in a darkroom. The degradation reaction was studied by monitoring the discoloration of dye as a function of irradiation time using UV-visible spectrophotometeric technique. The Fe3O4-MWCNT samples have continuous degradation ability under the UV illumination with the first order kinetics and the dye removal was better than in the pristine Fe3O4. The resultant composite catalyst was found to be efficient for the photo-Fenton reaction of the dye.

Non-sintering cement was manufactured with briquette ash. Alkali activator for compression bodies used a NaOH solution. In order to apply alkali-activated briquette ash and the non-sintering cement to concrete, several experimental studies were performed. It was necessary to study the binder obtained by means of a substitute for the cement. This study concentrated on strength development according to the concentration of NaOH solution, the curing temperature, and the curing time. The highest compressive strength of compression bodies appeared as 353kgf/cm2 cured at 80˚C for 28 days. This result indicates that a higher curing temperature is needed to get a higher strength body. Also, geopolymerization was examined by SEM and XRD analysis after the curing of compression bodies. According to SEM and XRD, the main reaction product in the alkali activated briquette ash is aluminosilicate crystal.

High-energy mechanical milling (HEMM) and sintering into Al-Mg alloy melt were employed tofabricate an Al alloy matrix composite reinforced with submicron and micron sized Al2O3 particles. Al-basedmetal matrix composite (MMC) reinforced with submicron and micron sized Al2O3 particles was successfullyfabricated by sintering at 1000oC for 2h into Al-Mg alloy melt, which used high energy mechanical milled Al-SiO2-CuO-ZnO composite powders. Submicron/micron-sized Al2O3 particles and eutectic Si were formed by in situdisplacement reaction between Al, SiO2, CuO, and ZnO during sintering for 2h into Al-Mg alloy melt and werehomogeneously distributed in the Al-Si-(Zn, Cu) matrix. The refined grains and homogeneously distributedsubmicron/micron-sized Al2O3 particles had good interfacial adhesive, which gives good wear resistance withhigher hardness.

This study is focused on the antimicrobial activity of cyanobacteria Microcystis aeruginosa by the reduction and oxidation reaction of copper and zinc alloy metal fiber filter. Cu/Zn ion is easily makes radicals with molecular hydroperoxide. Especially, hydroperoxide radical shows strong toxicity to the strains. Plasma membrane causes conformational change when hydroperoxide radical binds to plasma membrane. Elution of copper ion from copper and zinc alloy metal fiber is detected in the cyanobacteria solution as 0.5 ppm, and that of zinc ion is 0 ppm respectively. Zinc ion is figured to form a hydroxide in the cyanobacteria solution and precipitated to form a sludge. The concentration of chlorophyll-a in the cyanobacteria solution was proved to be the index of antimicrobial level of Microcystis aeruginosa.

Nano magnetite particles have been prepared by two step reaction consisting of urea hydrolysis and ammonia addition at certain ranges of pH. Three different concentrations of aqueous solution of ferric () and ferrous () chloride (0.3 M-0.6 M, and 0.9 M) were mixed with 4 M urea solution and heated to induce the urea hydrolysis. Upon reaching at a certain pre-determined pH (around 4.7), 1 M ammonia solution were poured into the heated reaction vessels. In order to understand the relationship between the concentration of the starting solution and the final size of magnetite, in-situ pH measurements and quenching experiments were simultaneous conducted. The changes in the concentration of starting solution resulted in the difference of the threshold time for pH uprise, from I hour to 3 hours, during which the akaganeite (-FeOOH) particles nucleated and grew. Through the quenching experiment, it was confirmed that controlling the size of -FeOOH and the attaining a proper driving force for the reaction of -FeOOH and ion to give are important process variables for the synthesis of uniform magnetite nanoparticles.

[ ] nanotubes for photocatalytic application have been synthesized by hydrothermal method. nanotubes are formed by washing process after reaction in alkalic solution. Nanotubes with different morphology have been fabricated by changing NaOH concentration, temperature and time. nanoparticles were treated inside NaOH aqueous solution in a Teflon vessel at for 20 h, after which they were washed with HCl aqueous solution and deionized water. Nanotube with the most perfect morphology was formed from 0.1 N HCl washing treatment. nanotube was also obtained when the precursor was washed with other washing solutions such as , NaCl, , and . Therefore, it was suggested that ion combined inside the precursor compound slowly comes out from the structure, leaving nanosheet morphology of compounds, which in turn become the nanotube in the presence of hydroxyl ion. To stabilize the sheet morphology, the different type of washing treatment solution might be considered such as amine class compounds.

The objective of the present study is to investigate the increase in the functional characteristics of a substrate by the formation of a thin coating layer. Thin coating layers of have high potential because exhibits high hardness. Shock induced reaction synthesis is an attractive fabrication technique to synthesize uniform coating layer by controlling the shock wave. Ti and Si powders to form using shock induced reaction synthesis, were mixed using high-energy ball mill into small scale. The positive effect of this technique is highly functional coating layer on the substrate due to ultra fine substructure, which improves the bonding strength. These materials are in great demand as heat resisting, structural and corrosion resistant materials. Thin coating layer was successfully recovered and showed high Vickers' hardness (Hv=1183). Characterization studies on microstructure revealed a fairly uniform distribution of powders with good interfacial integrity between the powders and the substrate.

이 연구에서는 플라즈마 제염 기술의 실용화를 위해 , , 등의 반응성 플라즈마 기체를 이용하여 원자력 시설의 주요 오염원인 코발트 핵종에 대한 표면 제염 모의실험을 수행하였다. 디스크 형태의 금속코발트에 대하여 시편 표면 온도를 변수로 플라즈마 식각 실험을 수행한 결과 반응율은 에서 기체의 경우 그리고 와 기체의 경우 각각 과 이었으며, 이들 반응의 활성화에너지는 각각 39.4 kJ/mol, 42.1 kJ/mol, 116.0 kJ/mol이었다. 이와 함께 AES (Auger Electron Spectroscopy)를 이용하여 반응 생성물 성분 분석 결과 이들 반응의 주요 반응 기구는 코발트의 불화 반응임이 밝혀졌다. 이 연구를 통해 확보된 의 금속 표면 식각율은 주요 반도체 공정의 식각율을 뛰어넘는 높은 식각율로 플라즈마 제 염 기술의 실용화를 앞당길 수 있는 고무적인 결과라 할 수 있을 것이다.

목적 : 본 연구에서는 암묵 및 외현적 속성을 가진 운동 과제를 통해 정신훈련과 실제훈련의 효과와 정신 훈련에 적합한 속성의 운동 과제를 알아보고자 하였다. 연구방법 : 정상 성인 36명을 세 집단(정신훈련군, 실제훈련군, 대조군)으로 무작위 할당하고, 표적조준과제와 시열반응과제를 이용하여 정신훈련 및 실제훈련 실시하였다. 표적조준과제는 모니터에서 제공하는 좌우의 두 개의 원안에 마우스를 위치함과 동시에 클릭을 하게 하였고, 시열반응과제는 모니터에서 제시되는 네 가지의 색깔에 대응하는 반응패드를 손가락을 이용하여 최대한 빨리 정확히 누르도록 하여, 반응시간을 측정하였다. 정신훈련과 실제훈련은 각각 하루 30분, 3일 동안 훈련하였고, 훈련 전과 후의 운동반응시간을 측정하여 비교하였다. 결과 : 표적조준과제에서는 정신훈련군과 실제훈련군에서 모두 대조군에 비해 통계학적으로 유의하게 반응시간의 변화를 보였고(p<.05), 시열반응과제에서도 정신훈련군과 실제훈련군에서 대조군에 비해 통계학적으로 유의하게 반응시간의 변화 차이를 보였다(p<.05). 또한 각각의 과제에서 집단간의 표준화된 점수의 비교에서 표준 조준과제의 경우, 실제훈련군에서 통계학적으로 유의하게 높은 증가를 보였고(p<.05), 시열반응과제의 경우에는 실제훈련군이 그 증감이 높았지만, 통계적으로 유의한 결과를 보이지 않았다(p>.05). 결론 : 정신훈련은 암묵 및 외현적 속성을 가진 모든 과제에서 운동학습이 이루어졌고, 암묵적 지식의 습득보다는 외현적 지식이 요구되는 과제에서 운동학습의 효과가 높았다.

Reaction bonded silicon carbide (RBSiC) is an important engineering ceramic because of its high strength and stability at elevated temperatures, and it is currently fabricated using reasonably cheap manufacturing processes, some of which have been used since the 1960s. However, forming complicated shapes from these materials is difficult because of their poor workability. The purpose of this work is to join the reaction-bonded SiC parts using a preceramic polymer as joint material. The manufacturing of ceramic material in the system Si-O-C from preceramic silicon containing polymers such as polysiloxanes has attained particular interest. The mixtures of preceramic polymer and filler materials, such as SiC, Si and MoSi, were used as a paste for the joining of reaction sintered SiC parts. The joining process during the annealing in Ar atmosphere at were described. The maximum strength of the joints was 63 MPa for the specimen joined with 10 vol.% of and 30 vol.% of SiC as filler materials. Fracture occurred in the joining layer. This indicates that the joining strength is limited by the strength of the joint materials.

The purpose of this study was to assess the influence of two shoe size conditions on foot pressure, ground reaction force (GRF), and lower extremity muscle fatigue. Seven healthy men participated. They randomly performed walking and running in two different conditions: proper shoe size and 10 mm greater than proper shoe size. Peak foot pressure, and vertical, anterior and mediolateral force components were recorded with the Parotec system and Kisler force platform. To assess fatigue, the participants performed treadmill running for twenty-five minutes twice, each time wearing a different shoe size. Surface electromyography was used to confirm localized muscle fatigue using power spectral analysis of four muscles (tibialis anterior, gastrocnemius medialis, rectus femoris, and biceps femoris). The results were as follows: 1) In walking conditions, there was a significantly higher peak pressure in the 10 mm greater than proper shoe size insole sensor 1, 2, 14, and 18 (p<.05). 2) In running conditions, there was a significantly higher peak pressure in the 10 mm greater than proper shoe size insole sensor 5, 14, and 15 (p<.05). 3) In walking conditions, there was a significantly higher first maximal vertical GRF in the 10 mm greater than proper shoe size (p<.05). 4) In running conditions, no GRF components were significantly different between each shoe size condition (p>.05). 5) Muscle fatigue indexes of the tibialis anterior and rectus femoris were significantly increased in the 10 mm greater than proper shoe size condition. These results indicate that wearing shoes that are too large could further exacerbate the problems of increased foot pressure, vertical GRF, and muscle fatigue.

The magnetron sputtering was used to deposit Ni buffer layers on the polyimide surfaces to increase the adhesion strength between Cu thin films and polyimide as well as to prevent Cu diffusion into the polyimide. The Ni layer thickness was varied from 100 to 400Å. The adhesion strength increased rather significantly up to 200Å of Ni thickness, however, there was no significant increase in strength over 200Å. The XPS analysis revealed that Ni thin films could increase the adhesion strength by reacting with the polar C=O bonds on the polyimide surface and also it could prevent Cu diffusion into the polyimide. The Cu/Ni/ polyimide multilayer thin films showed a high stability even at the high heating temperature of 200˚C, however, at the temperature of 300˚C, Cu diffused through the Ni buffer layer into polyimide, resulting in the drastic decrease in adhesion strength.

본 연구는 2004년도 2월에서 3월까지 철원분지의 민간인통제지역에서 두루미와 재두루미의 차량에 대한 반응 행동과 함께 방해요인과 먹이와의 수지균형에 관하여 실시하였다. 재두루미의 도로로부터의 평균취식거리는 두루미에 비하여 가까웠다. 두루미와 재두루미 모두 무리크기가 클수록 도로로부터 떨어진 평균거리는 증가하였다. 두루미와 재두루미는 차량의 근거리 정지에 대하여 경계, 걷기, 뛰기, 비행의 반응을 보였으며, 도로에서 가까울수록 차량에 대하여 민감하게 반응하였다. 도로에서 멀수록 차량의 정지에 대한 반응 시간은 두루미와 재두루미 모두 감소하였다. 차량의 정지에 대하여 반응을 보이지 않는 반응역치거리는 두루미와 재두루미 모두 250m이었다. 두루미는 200m내에서 재두루미에 비하여 민감하게 반응하였다. 도로 교통량이 증가함에 따라 동일거리에서의 반응시간은 변화가 없었지만, 도로인근 지역에서 멀어지게 하고 해당지역을 취식지로 이용하지 않게 하는 영향이 있었다. 두루미와 재두루미가 차량 통행 등의 방해요인에도 불구하고 낙곡을 취식했던 것은 도로인근 지역의 잔존 낙곡의 밀도가 높았기 때문이었다.

The objective of current study is to determine antioxidant activities of Maillard reaction products (MRPs) obtained from Maillard reaction model systems with different combinations of 15 individual amino acids and 3 different sugars(glucose, fructose and lactose). Antioxidant activities of MRPs were determined using techniques of measuring DPPH and ABTS-radical scavenging activities. The results indicated that radical scavenging activities of MRPs were significantly increased compared to individually thermal treated amino acids and sugars. Among the model systems, the systems containing glycine or lysine + sugars (glucose, fructose and fructose) displayed the stronger DPPH and ABTS radical scavenging activities than other model systems. In addition, when the thermal treatment time was increased, radical scavenging activities of MRPs were increased in a reaction time-dependent manner. Further investigation using bioassay-directed fractionation was performed using two model systems (glycine+glucose, lysine+glucose) which displayed the strongest radical scavenging activities. The reaction solution were subjected to partition with a different polarity of solvent (hexane, ethyl acetate, n-butanol, and water) for evaluation of their radical scavenging activity. Among them, ethyl acetate fraction exhibited the strongest DPPH-radical scavenging activity in both model systems.

The several enzymes reaction which involve the quality change of fresh vegetables, such as chlorophylase, polyphenol oxidase, lypoxygenase, C-S-lyase, myrosinase and enzymes related lignification were reviewed. Numerous enzyme reaction continuously proceeds to the deterioration of vegetables after harvest due to the respiration and biochemical metabolism reaction, especially in case of physical injuring. It is extremely important to inhibit and to control these enzyme reaction in order to maintain the organoleptic and nutritional quality of fresh vegetables.

The application of Carbon and graphite based materials in unprotected environment is limited to a temperature of 450℃ or so because of their susceptibility to oxidation at this temperature and higher. To over come these obstacles a low cost chemical vapour reaction process (CVR) was developed to give crystalline and high purity SiC coating on graphite and isotropic C/C composite. CVR is most effective carbothermal reduction method for conversation of a few micron of carbon layer to SiC. In the CVR method, a sic conversation layer is formed by reaction between carbon and gaseous reagent silicon monoxide at high temperature. Characterization of SiC coating was carried out using SEM. The other properties studied were hardness density and conversion efficiency.