본 연구는 원양 다랭이 연승 어획량을 데이터 베이스 처리하여 여러 가지 정보를 제공함으로써 조업시 경제성 있는 어장 선정에 도움을 주기 위하여 처리 프로그램을 작성하여 그 실용성을 검토해 보고자 하였다. 자료는 국립수산진흥원에서 발행한 보고서의 어획량 데이터를 이용하였고, 데이터 베이스 처리를 위한 프로그램을 설계한 후 실행해 보았다. 1)프로그램은 Quick Basic을 이용하여 작성하였고, 데이터 파일은 random 파일로 변환하여 사용하였다. 데이터 베이스 프로그램은 구획별로 조획율을 나타내는 어장도를 그리는 프로그램과 조획율을 나타내는 그래프 및 도표를 구성하는 프로그램, 데이터 통계를 나타내는 프로그램, 그리고 어장 평가 지수를 나타내는 프로그램으로 구성하였다. 2)조획율을 나타내는 어장도에서는 5˚간격의 해구에 조획율의 크기를 나타내는 원을 나타냄으로써 사용자가 쉽게 어획이 잘되는 해역을 판단 할 수 있었다. 3)조획율을 수치로 나타내는 도표를 통하여 원의 크기로 나타내었던 조획율 값을 좀 더 상세히 알 수 있었다. 4)시기, 저장, 어종에 따른 조획율 및 어획마리수의 그래프는 그것의 변화패턴의 규명에 도움이 되었다. 5)어장의 경제성을 비교해 볼 수 있는 시뮬레이션 기능을 이용하여 조업자가 경제성 있는 어장을 권고 받을 수 있었다.

본 논문에서는 가압열충격의 파괴역학적 해석에 필요한 이론을 조사하였고 원자로용기의 구조건전성을 평가하기 위하여 해석과정을 전산화하였다. 우선 사고 transient에 대하여 원자로용기내의 압력과 주입되는 냉각재의 온도변화가 주어지면 이들로 부터 시간에 따른 용기에서의 온도와 응력분포를 구하고, 중성자 조사량과 용기 재질의 화학성분으로 부터 기준무연성천이온도의 분포가 구해지며 이로부터 파괴인성치 KIA와 KIC의 분포가 얻어진다. 또한 응력분포로 부터 균열의 크기 및 형상에 따라 응력확대계수 KI이 구해지므로 이를 KIA및 KIC와 비교함으로써 균열의 성장거동을 예측할 수 있다. 지금까지 보고된 가압열충격을 유발할 수 있는 대표적인 사고 transient가 국내 발전소에 발생할 경우를 가정하여 해석을 수행하였고 그 결과에 대하여 검토하였다.

This study was carried out to develop the computer-assisted Hazard Analysis and Critical Control Point (HACCP) program for a systematic approach to the identification, assessment and control of hazards for foodservice manager to assure the microbiological quality of food in hospital foodservice operations. Sanitation practices were surveyed and analyzed in the dietetic department of 4 hospitals. Among them, one 762-bed general hospital was selected as standard model to develop computer-assisted HACCP program. All data base files and processing programs were created by using Foxpro package for easy access of HACCP concept. HACCP program was developed based on the methods suggested by NACMCF, IAMFES and Bryan. This program consisted of two parts: the pre-stage for HACCP study and the implementation stage of the HACCP system. 1. Pre-stage for HACCP study includes the selection of menu item, the development of the HACCP recipe, the construction of a product flow diagram, and printing the HACCP recipe and a product flow diagram. A menu item for HACCP study can be selected from the menu item lists classified by cooking methods. HACCP recipe includes ingredients, their amount and cooking procedure. A flow diagram is constructed based on the HACCP recipe. The HACCP recipe and a product flow diagram are printed out. 2. Implementation of HACCP study includes the identification of microbiological hazards, the determination of critical control points, the establishment of control methods of each hazard, and the complementation of data base file. Potentially hazardous ingredients are determined and microbiological hazards are identified in each phase of the product flow. Critical control points (CCPs) are identified by applying CCP decision trees for ingredients and each process stage. After hazards and CCPs are identified, criteria, monitoring system, corrective action plan, record-keeping system and verification methods are established. When the HACCP study is complemented, HACCP study result forms are printed out. HACCP data base file can be either added, corrected or deleted.

We have developed a graphic software for image processing of astronomical data obtained by observational equipment in Astronomical Observatory of Kyung Hee University. The essential hardware for running our computer program is simply composed of a PC with the graphic card to handle 256 colors and the color graphic monitor, including CCD camera system. Our software has been programmed in WINDOWS to provide good environments for users, by using various techniques of image processing on astronomical image data recorded in FITS format by KHCCD program(Jin and Kim, 1994) with a compressional mode. We are convinced that our results will be a fundamental and useful technique in the construction of data processing system and can be effectively used in any other observatories, as well as in data processing system of Kyung Hee University.

본 논문은 형상의 비선형성을 고려한 큰 동하중을 받는 낮은 원호아치의 동적해석에 관한 연구이다. 따라서 낮은 원호아치를 대상으로 동적 비선형 해석을 수행하고 임계좌굴하중을 구할 수 있는 컴퓨터 프로그램을 개발하는데 주안점을 둔다. 형상의 비선형성은 Lagrangian 운동좌표를 고려하여 해석하였으며 비선형 동적 운동방정식을 풀기 위하여 유한요소법을 사용하였다. 개발된 프로그램을 사용하여 만재 방사형 등분포하중을 받는 원호아치를 해석하고, 그 결과를 다른 연구결과와 비교하여 검증하였다. 또한 여러가지의 형상의 아치에 대한 좌굴 해석을 실시하여 임계좌굴하중을 구하였으며 기존의 연구와 비교하여 정확성을 확인하였다. 모형해석을 통해서 큰 동하중을 받는 원호아치는 기하학적 비선형 거동을 고려하여 해석되어야 하며 아치가 낮아질수록 좌굴발생 가능성이 높아짐을 알 수 있다.

We developed a real-time CCD photometric program for IBM PC compatibles. This program can perform several functions necessary for CCD photometry such as telescope control. filter rotation, CCD camera control and data acquisition, two-dimensional image processing, simple aperture photometry and automatic differential photometry. The image processing of a spiral galaxy M51 observed with the SNU 61cm reflector shows a well developed spiral structure. Simple aperture photometric results of 14 stars in open cluster NGC 6871 almost accorded with those from IRAF/APPHOT. And we could confirm the light variation of eclipsing binary EM Cep by simultaneous automatic differential photometry of 7stars in NGC 7160. Due to the excellence in the precision and efficiency of automatic differential photometry using CCD. this program is very useful for the study of small amplitude δ δ Sct type variables and of the photometric stability of B ∼ ∼ F type stars.

The purpose of this study was to develop nutrition education program that promotes eating behavior of preschool children. 118 parents of preschool children were surveyed to understand of children's food preferences and prejudices. The preference for vegetable showed the lowest score(2.345) and fruit was the favorite food(4.11). These results imply the consequence of teaching balanced diet with emphasizing vegetables for preschoolers. Thus, nutrition education program including teaching material were developed to provide the preschoolers with cognitive, affective, and psychomotor activities in order them to the familiar with vegetables. The program were consisted of following five parts: 1. Read-A-Story includes six stories with follow-up activities. 2. Grow-A-Plant gives instructions for growing vegetables. 3. Play-A-Game stimulates children's imagination and learning. 4. Take-A-Trip suggests places to visit that grow, sell, and prepare vegetables. 5. Eat-A-Treat presents easy ways to prepare and enjoy vegetables. Twenty one-Standardized recipes for vegetable dishes were also developed for preschooler's luncheon and snack in daycare center.

본 연구에서는 C++언어를 이용한 객체지향 프로그래밍 기법으로 매트릭스 연산과 평면뼈대 구조물의 해석이 가능한 PC용 구조해석 프로그램을 개발하였다. 객체지향 프로그래밍에서의 주요 개념인 객체, 클래스, 처리방식, 상속성 및 다형성을 도식화하여 설명하였으며, 매트릭스 연산과 평면뼈대 구조해석에 대한 예제 해석 결과는 이 프로그램의 효율성과 타당성을 보여 주었다. 따라서 본 연구는 객체지향 프로그래밍기법의 특징인 프로그램의 확장성과 재사용성 및 다양한 GUI의 구현가능성을 이용하여 앞으로의 객체지향 유한요소 프로그램 개발에 활용될 것이다.

The purpose of the study was to develop computer-based menu planning program for day-care centers maximizing food preference score among children and satisfying such constraints as expense, nutrients, and season. Children's preference about 142 menu items was surveyed among 382 children of day-care centers. A 16-bit personal computer compatible with IBM-PC/AT was used. The data base files were created by dBASE III Plus, and processing programs were created by using FORTRAN language. Children preferred bread or a la carte menu items to cooked rice in main dish category. Deep fat fried or stir-fried menu items were more preferred than kimchi or cooked vegetables in side dish category. Preference scores for menu items were influenced by cooking methods or main ingredients. The contents of the computerized system show that when the program runs, the user should type inputs of cycle, season, and menu pattern, then the computer lists a series of menu satisfying the criteria of constraints. The user can examine and select a set of menu from the menu lists. Menus are generated seasonally. Menu lists are generated weekly and monthly basis with the contents of menu items, preference scores and price. Nutrient reports are also generated on a weekly and monthly basis with the contents of calories, 12 nutrients and price. Recipes for each menu items are also generated.

근세 사회의 눈부신 산업발전과 함께 늘어나는 빈번한 차량 하중을 좀더 합리적으로 충분히 노반에 분산시키기 위하여 콘크리트포장이 근래 널리 이용 되어져 왔다. 아스팔트계 포장의 표층이 휨응력에 저항하지 못하고 하중을 받으면 표층의 변형이 그대로 노반에 전달되어 일체로되어 변형을 하지만 콘크리트 포장은 콘크리트 슬래브가 구조체로서의 높은 휨강도와 큰 탄성계수에 의해 휨응력 및 전단력에도 저항을 하게 되므로 차량하중뿐만 아니라 주기적인 온도 변화에 의한 팽창, 수축, 솟음, 노상 노반의 체적변화등에 의한 복잡한 응력을 받게된다. 이러한 콘크리트 포장구조의 제응력 현상을 구조 역학적인 입장에서 좀더 정확하게 합리적으로 해석을 하기위해 유한요소법을 이용한 컴퓨터 구조해석 프로그램을 개발하여 모든 하중 조건하에서의 슬래브 처짐과 응력을 계산하고 예상하므로써 콘크리트 포장구조의 파괴현상을 연구하고 합리적인 설계자료를 제공하고자 한다.

To construct and operate nuclear power plants (NPPs), it is mandatory to submit a radiation environmental impact assessment report in accordance with Article 10 and Article 20 of the Nuclear Safety Act. Additionally, in compliance with Article 136 of the Enforcement Regulations of the same law, KHNP (Korea Hydro & Nuclear Power) annually assesses radiation environmental effects and publishes the results for operating NPPs. Furthermore, since the legalization of emission plans submission in 2015, KHNP has been submitting emission plans for individual NPPs, starting with the Shin-Hanul 1 and 2 units in 2018. These emission plans specify the emission quantities that meet the dose criteria specified by the Nuclear Safety and Security Commission. Before 2002, KHNP used programs developed in the United States, such as GASPAR and LADTAP, for nearby radiation environmental impact assessments. Since then, KHNP has been using K-DOSE60, developed internally. K-DOSE60 incorporates environmental transport analysis models in line with U.S. regulatory guidance Regulatory Guide 1.109 and dose assessment models reflecting ICRP-60 recommendations. K-DOSE60 is a stand-alone program installed on individual user PCs, making it difficult to manage comprehensively when program revisions are needed. Additionally, during the preparation of emission plans and the licensing phase, improvements to KDOSE60’ s dose assessment methodology were identified. Furthermore, in 2022, regulatory guidelines regarding resident dose assessments were revised, leading to additional improvement requirements. Currently, E-DOSE60, being developed by KHNP, is a network-based program allowing for integrated configuration management within the KHNP network. E-DOSE60 is expected to be developed while incorporating the identified improvements from K-DOSE60, in response to emission plan licensing and regulatory guideline revisions. Key improvements include revisions to dose assessment methodologies for H-13 and C-14 following IAEA TRS-472, expansion of dose assessment points, and changes in socio-environmental factors. Furthermore, data such as site meteorological information and releases of radioactive substances in liquid and gaseous forms can be linked through a network, reducing the potential for human errors caused by manual data entry. Ultimately, E-DOSE60 is expected to optimize resident exposure dose assessment and enhance public trust in NPP operation.

In order to evaluate the exposure dose of residents living near nuclear power plants, a Off-site Dose Calculation Program (ODCP) has been developed based on SAP since 2021. The ODCP consists of social environmental factor, atmospheric diffusion factors, liquid/gas dose evaluation, and comprehensive analysis, and was developed by dividing it into functional modules. The offsite dose calculation can be carried out monthly, quarterly, semi-annual, and annual, and resident dose evaluation is conducted by entering air diffusion factors and emissions for each period. It also enables comprehensive evaluation result management by developing history management functions together.

With the importance of permanent disposal of high-level radioactive waste (HLW) generated in Korea, the deep geological disposal system based on the KBS-3 type is being developed. Since the deep geological repository must provide the long-term isolation of HLW from the surface environment and normal habitats for humans, plants, and animals, it is essential to assess the longterm performance of the disposal facility considering thermal-hydraulic-mechanical-chemical (TH- M-C) evolution. Decay heat dissipated from HLW contained in the canister causes an increase in temperature in the adjacent area. The requirement for the maximum temperature is established in consideration of the possibility of bentonite degradation. Therefore, when designing the repository, the temperature in the region of interest should be identified in detail through the thermal evolution assessment to ensure that the design requirement is satisfied. In the thermal evolution analysis, it is needed to evaluate the temperature distribution over the entire area of the disposal panel to consider the heat generated from both a single canister and adjacent canisters. Computational fluid dynamics (CFD) codes are widely used for detailed temperature analysis but are limited to simulating a wide range. Accordingly, in this study, we developed an analytical solution-based program for efficiently calculating the temperature distribution throughout the deposition panel, which is based on threedimensional heat conduction equations. The code developed can assess the temperature distribution of engineered and natural barrier systems. Principal parameters to be inputted are as follows: (a) geometry of the panel (e.g. width, length, height, spacing between canisters), (b) geometry of the canister (e.g. diameter, height), (c) thermal properties of bentonite and host-rock, (d) initial conditions (e.g. residual heat, temperature), and (e) time information (e.g. canister emplacement rate, time-interval, period). Through the calculation for the conceptual problem of a deposition panel capable of accommodating 900 (i.e. 30×30) canisters, it was confirmed that the program can adequately predict when and where the maximum temperature will occur. It is expected that the overall temperature distribution within the panel can be obtained by the evaluation of the entire region using this program reflecting the detailed design of the repository to be developed in the future. In addition, the thermal evolution analysis considering the influence of other canisters can be performed by applying the results as boundary conditions in the CFD analysis.

The US NRC developed a program called NRCDose3 to evaluates the environmental impact of radiation around nuclear facilities. The NRCDose3 code is a software suite that integrates the functionality of three individual LADTAP II, GASPAR II, and XOQDOQ Fortran codes that were developed by the NRC in the 1980’s and have been in use by the nuclear industry and the NRC staff for assessments of liquid effluent and gaseous effluent, and meteorological transport and dispersion, respectively. Through the integrated program, it is possible to conduct safety assessment and environmental impact assessment from liquid and gaseous effluent when operating permits are granted. In addition to a more user-friendly graphic user interface (GUI) for inputting data, significant changes have been made to the data management and operation to support expanded capabilities. The basic calculation methods of the LADTAP II, GASPAR II, and XOQDOQ have not been changed with this update to the NRCDose3 code. Several features have been added. The previous program used only ICRP-2 dose conversion factor, but the new program can additionally use dose conversion factor of ICRP-30 and ICRP-72. In the previous program, 4 age groups (infant, child, teen, and adult) were evaluated during dose evaluation, but when ICRP-72 was selected, 6 age groups (infant, 1-year, 5-year, 10-year, 15-year, and adult) could be evaluated. In addition, when selecting ICRP-72, many user-modifiable parameters such as food intake and exposure time were added. It will be referred to E-DOSE60, a program currently under development.

목적: 본 연구의 목적은 부상 트라우마를 경험하고 있는 현역 엘리트 선수들을 위한 상담 프로그램을 개발하고 적용하는 것이다. 방법: 프로그램 개발을 위하여 김창대 등(2011)의 프로그램 개발 모형을 이용하였다. 문헌고찰, 전문가 의견 수렴, 예비 연구를 통해 총 6회기의 단기 인지행동치료 프로그램이 개발되었다. 개발한 프로그램을 부상 트라우마를 경험하고 있는 2명의 현역 엘리트 선수에게 적용하였다. 프로그램의 효과를 확인하기 위하여 사 건충격척도, 한국어판 우울증 선별도구, 부상 불안 척도, 프로그램 만족도 설문지를 이용한 단일 사례 사전 사후 실험 설계 방법을 시행하였다. 또한 질적 사례 연구 방식으로 상담 과정 동안 내담자의 변화를 구체적으로 기술 하였다. 결과: 프로그램 적용 후 대상자 A와 B는 모두 사건충격척도, 우울증 선별도구, 부상 불안 척도에서 호전 을 보였다. 심상 노출은 내담자 A, B 모두에게 가장 도움이 된 프로그램이었다. 반면 인지재구성은 내담자 B에 게 가장 도움이 되지 않은 프로그램이었다. 결론: 부상 트라우마 단기 인지행동치료는 비교적 단기간에 진행할 수 있고, 선수들에게 익숙한 내용으로 구성되었다. 따라서 이 프로그램은 부상 트라우마를 경험하고 있는 엘리트 선수들을 위해 현장에서 유용하게 적용할 수 있을 것이다.

Gamma spectrometry is one of the main analysis methods used to obtain information about unknown radioactive materials. In gamma-ray energy spectrometry, even for the same gamma-ray spectrum, the analysis results may be slightly different depending on the skill of the analyst. Therefore, it is important to increase the proficiency of the analyst in order to derive accurate analysis results. This paper describes the development of the virtual spectrum simulator program for gamma spectrometry training. This simulator program consists of an instructor module and trainee module program based on an integrated server, in which the instructor transmits a virtual spectrum of arbitrarily specified measurement conditions to the students, allowing each student to submit analysis results. It can reproduce a virtual gamma-ray energy spectrum based on virtual reality and augmented reality technique and includes analysis function for the spectrum, allowing users to experience realistic measurement and analysis online. The virtual gamma-ray energy spectrum DB program manages a database including theoretical data obtained by Monte Carlo simulation and actual measured data, which are the basis for creating a virtual spectrum. The currently developed database contains data on HPGe laboratory measurement as well as in-situ measurements (ground surface, decommissioned facility wall, radiowaste drum) of portable HPGe detectors, LaBr3(Ce) detector and NaI detector. The analysis function can be applied not only to the virtual spectrum, but also to the input measured spectrum. The parameters of the peak analysis algorithm are customizable so that even low-resolution spectra can be properly analyzed. The validity of the database and analysis algorithm was verified by comparing with the results derived by the existing analysis programs. In the future, the application of various in-situ gamma spectrometers will be implemented to improve the profiling of the depth distribution of deposited nuclides through dose rate assessment, and the applicability of the completed simulator in actual in-situ gamma spectrometry will be verified.

3D modeling is a technology for representing real objects in a virtual 3D space or modeling and reproducing the physical environment. 2D drawings for viewing the existing building structure have limitations that make it difficult to understand the structure. By implementing this 3D modeling, specific visualization became possible. 3D technology is being applied in a wide range of preevaluation work required for nuclear decommissioning. In Slovakia, 3D modeling was applied to determine the optimal cutting strategy for the primary circuit before dismantling the VVER type Bohunice V1. In Japan, the Decommissioning Engineering Support System (DEXUS) program has been developed that incorporates VRDose, a decommissioning engineering support system based on 3D CAD models. Through this, the cutting length of the work object and the quantity of containers for packaging waste are calculated, exposure dose calculations in various dismantling scenarios, and cost estimation are performed. Korea also used 3D technology to evaluate the decommissioning waste volume for Kori Unit 1 and to evaluate the optimal scenario of the decommissioning process procedure for the research reactor Unit 1. 3D technology is currently being used in various pre-decommissioning evaluations for VVER, PWR, and research reactors. Overseas, a program that matches various decommissioning pre-evaluation tasks with cost estimation has also been developed. However, most 3D technologies are mainly used as a support system for dose evaluation and amount of decommissioning waste calculation. In this study, 3D modeling was performed on the PHWR structure, and physical and radiological information about the structure was provided. The information on the structure can present the unit cost for the work object by confirming the standard of the applied unit cost factor (UCF). The UCF presents the unit cost for repeated decommissioning operations. The decommissioning cost of the work object can be obtained by multiplying the UCF by the number of repetitions of the work. If the results of this study are combined with the process evaluation and waste quantity estimation performed in previous studies, it is judged that it will be helpful in developing an integrated NPP decommissioning program that requires preliminary evaluation of various tasks. In addition, it is judged that a clear cost estimation of the object to be evaluated will be possible by matching the 3D work object with the UCF.