본 연구에서는 투명도와 기계적 특성을 향상시키기 위해 저온 공정의 졸-겔 법을 이용하여 하이브리드 복합체의 코팅 박막을 제조하였다. 하이브리드 복합체로는 ZrO2/TiO2/organosilane을 사용하였으며, 그 중 organosilane은 3-(trimethoxysilyl)propyl methacrylate을 사용하였고 이는 저온 공정의 광경 화 반응을 위해 도입되었다. 다양한 조성비로 합성된 복합체를 폴리 카보네이트 기판 위에 저온 공정의 졸 -겔 법을 이용하여 광경화와 열처리 공정을 거처 코팅 박막을 제조하였고 이 코팅 박막의 광학 특성 및 기계적 강도를 확인하였다. 코팅 박막은 가시광선 영역에서 97.5 % 이상의 투과도를 가짐을 확인하였고 기계적 강도는 9H 이상의 연필 경도를 가진 것을 확인하였다. 특히 ZTS-2-1 코팅 박막의 나노 압입 경도는 1.14 GPa로 가장 높게 측정되었다.

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with 0.2 μm pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

This paper presents experimental and analytical results for predicting tensile behavior of FRP Hybrid Bar(HYB). In order to confirm the tensile behavior of HYB wrapped with glass fiber reinforced polymer(GFRP) on deformed rebar, direct tensile tests were performed on 8 specimens. The diameter of the HYB was considered as a test variable and the tensile load, displacement, and tensile strain of each specimen were measured by tensile test. In order to predict the tensile behavior of HYB, numerical analysis based on tensile model of each material was performed. The tensile models of reinforcing bar, glass fiber, and resin, which are the constituent materials of HYB, are assumed to be simple shapes according to their material properties. The results of the numerical analysis through the strain compliance condition of each material were compared with the experimental results and both results showed consistent trends. The experimental and analytical ratios for yield and ultimate loads were 1.02 and 1.00, respectively, and the coefficient of variation were 3.61 and 2.54, respectively. However, a maximum of about 9 mm error occurred due to the slip generated by the direct tensile test in the comparison between the experimental results and the analytical results for the tensile displacement.

본 연구는 마치종 황색 알곡 품종으로 등록된 강일옥 옥수수 알곡의 처리별 시료 및 속대의 일반성분, 생리활성 검정, 색소 함량을 분석하여 기초자료로 제공하고자 수행되었다. 강일옥 옥수수를 알곡, 거피된 알곡, 알곡 껍질 및 속대로 분리하여 일반성분 분석 결과, 수분함량은 거피된 알곡이 12.04%로 가장 높았고 알곡 껍질의 조회분, 조지방, 조단백질 함량은 각각 3.19%, 8.59%, 12.01%로 강일옥 옥수수 처리별 시료 중 가장 높은 함량을 나타내었다. 강일옥 옥수수 처리별 시료의 무기성분 함량을 분석한 결과, 칼슘, 칼륨, 마그네슘, 철, 망간 및 인의 6종이 검출되었으며 공통적으로 검출된 주요 무기성분은 칼륨과 인이었다. 강일옥 옥수수 속대의 칼륨 함량이 114.33 mg/ 100 g으로 가장 높았으며 알곡 껍질의 인 함량이 2412.40 mg/100 g으로 가장 높게 측정되었다. 강일옥 옥수수 처리 별 시료의 항산화 활성 검정 결과, 강일옥 옥수수 속대 추 출물의 DPPH radical 소거능은 93.05%, ABTS radical 소 거능은 79.88%로 처리별 시료 중 가장 높게 측정되었으며 알곡, 거피된 알곡 및 알곡껍질 추출물의 DPPH 소거 능은 모두 70% 이상으로 우수한 항산화활성을 나타내었다. 강일옥 옥수수 처리별 시료의 항염 활성 검정 결과, 강일옥 옥수수 처리별 시료 추출물은 Raw264.7 대식세포 의 생존율에 영향을 미치지 않은 것으로 나타났으며 NO 생성량은 모든 시료 처리군에서 LPS 단독 처리군(con(+)) 에 비하여 유의적으로 NO 생성을 억제 하는 것으로 나타났다. 강일옥 옥수수 처리별 건조분말시료의 카로티노이드 색소 함량을 분석한 결과, 모든 시료에서 β-carotene은 검출되지 않았고, lutein과 zeaxantin은 알곡과 알곡 껍질 에서 검출되었으며 거피된 알곡과 속대에서는 검출되지 않았다. 강일옥 옥수수 알곡의 lutein과 zeaxantin의 함량은 각각 115.30 μg/100 g, 50.92 μg/100 g이었으며 알곡껍질의 lutein과 zeaxantin의 함량은 각각 37.98 μg/100 g, 19.27 μg/100 g이었다.

본 연구는 기상청의 기상레이더 관측망을 이용한 하이브리드 고도면 강우추정 기법 기반의 새로운 정량적 합성강수량 추정 방법을 제시한다. HSR기법은 지형클러터, 빔차폐, 비 기상 에코 및 밝은 띠의 영향을 받지 않는 하이브리드 고도면의 반사도를 합성하는 것이 특징이다. HSR 합성반사도는 정적 HSR (STATIC)과 단일편파레이더에 대한 퍼지로직 기법과 이중편파레이더에 대한 시선방향 질감 기반의 품질관리 절차를 사용하는 동적 HSR (DYNAMIC) 합성으로 구분된다. STATIC과 DYNAMIC은 2014년 5월부터 10월까지 10개의 강우 사례에 대해 기상청 현업용 합성강우 (MOSAIC)와 비교검증 하였다. 차폐 영역에서 STATIC, DYNAMIC, MOSAIC의 상관계수는 각각 0.52, 0.78, 0.69이며 평균 상대 오차는 각각 34.08, 30.08, 40.71%로 분석되었다.

The application of the theoretical model to real assembly lines has been one of the biggest challenges for researchers and industrial engineers. There should be some realistic approach to achieve the conflicting objectives on real systems. Therefore, in this paper, a model is developed to synchronize a real system (A discrete event simulation model) with a theoretical model (An optimization model). This synchronization will enable the realistic optimization of systems. A job assignment model of the assembly line is formulated for the evaluation of proposed realistic optimization to achieve multiple conflicting objectives. The objectives, fluctuation in cycle time, throughput, labor cost, energy cost, teamwork and deviation in the skill level of operators have been modeled mathematically. To solve the formulated mathematical model, a multi-objective simulation integrated hybrid genetic algorithm (MO-SHGA) is proposed. In MO-SHGA each individual in each population acts as an input scenario of simulation. Also, it is very difficult to assign weights to the objective function in the traditional multi-objective GA because of pareto fronts. Therefore, we have proposed a probabilistic based linearization and multi-objective to single objective conversion method at population evolution phase. The performance of MO-SHGA is evaluated with the standard multi-objective genetic algorithm (MO-GA) with both deterministic and stochastic data settings. A case study of the goalkeeping gloves assembly line is also presented as a numerical example which is solved using MO-SHGA and MO-GA. The proposed research is useful for the development of synchronized human based assembly lines for real time monitoring, optimization, and control.

This study develops a new hybrid passive energy dissipation device for seismic rehabilitation of an existing structure. The device is composed of a friction damper combined with a steel plate with vertical slits as a hysteretic damper. Analytical model is developed for the device, and the capacity of the hybrid device to satisfy a given target performance is determined based on the ASCE/SEI 7-10 process. The effect of the device is verified by nonlinear dynamic analyses using seven earthquake records. The analysis results show that the dissipated inelastic energy is concentrated on the hybrid damper and the maximum interstory drift of the SMRF with damping system satisfies the requirement of the current code.

기존에 많이 이용되고 있는 전기탈이온(EDI) 공정은 전기투석법과 이온교환수 지법을 혼합한 공정이다. 이 공정에 이용되는 모듈은 전기투석을 위한 양･음이 온교환막, 두 막 사이에 이온교환수지로 채워지는 형태이다. 하지만 이온교환수지와 양･음이온교환막으로 인해 모듈의 크기가 커지는 단점이 있다. 이러한 점 들을 바탕으로 현재 이온교환수지를 글라인딩하여 바이폴라형태의 막으로 만든 전기흡착탈이온 공정 모듈이 생산되고 있다. 본 연구는 모듈에 적용할 수 있는 높은 이온교환능력을 가지는 이온교환고분자를 합성하고, 이온교환수지을 대신 할 이온교환그룹을 가진 나노입자를 제조하여 이 둘을 적절하게 조절하여 하이브리드막을 제조하였다. 그리고 제조된 하이브리드막은 다양한 특성평가를 실시하였고, 그에 따른 고찰을 진행하였다.

해수담수화에 적용하기위한 이온교환막에 대한 연구이다. 이온교환막은 역삼투막에 비해 높은 효율을 가지며, 이에 따라 본 연구는 고분자와 입자를 섞어주어 복합막을 제조했다. 입자의 경우 표면적이 크고 좁은 입자크기 분포를 나타 내어 높은 이온교환용량을 나타낸다. 입자를 제조하여 양이온은 –NH3 +, -NR3 +, -PR3 +, -SR2 + 등의 관능기를 그리고 음이온은 –SO3 -, -COO-, -PO3 -, -C6H4O- 등의 관능기를 도입함으로써 양전하와 음전하로 높게 하전시킬 수 있다. 입자를 제조 하고 크기와 형상을 확인하기 위해 FE-SEM, 정량적 분석을 위한 FT-IR, 전기적 특성을 확인하기 위해 zeta potential, IEC value 그리고 열적 특성 평가를 위해 TGA, DSC를 사용하여 특성을 파악하였다.

Polymer electrolyte membrane (PEM) is one of key elements to determine both electrochemical performances and lifetimes of fuel cell electric vehicles (FCEVs). PEM is exposed to a variety of dynamic stimuli (e.g., temperature, humidity, pressure, fuel gases and so on) under their operation conditions and meets unavoidable mechanical damages derived from unequal pressure difference between anode and cathode feed gases. Even though there have been approaches to evaluate the mechanical strength of PEM materials, most of the trials could provide static information on their mechanical strength. In this study, a pressure-loaded blister hybrid system connected with gas chromatography was developed to disclose the efficacy of the system as an evaluation tool of dynamic PEM strength under realistic FCEV operation conditions.

Domestic fishing villages' net profit has consistently dropped down in recently, and currently it is down to 16.4%.This paper develop and increase fishing profit as this project will decrease 20% of the operation cost and eventually vitalize the fishing villages' economy. Especially, it could be an alternative solution to the constant requests of WTO (World Trade Organization) and UN ECOSOC (UN Economic and Social Council) to stop cross subsidization of marine products. IMO (International Maritime Organization) is concerned about air pollution caused by carbon dioxide production, and it strongly suggests on decreasing carbon dioxide discharge level. This paper will help protect ocean ecology as it will not only decrease various types of oil usage but also promote alternative technology solution. Also Increase business' profit by selling ocean and other related business parts and factors. Low speed electric car applies high performance level of motor and motor control devices. Among those, about 20% is the original cost of motor and motor control devices. Therefor entering low speed electric car market, parts sales and sales will increase.

The microstructure, flexural properties, electrical conductivity, thermal conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites filled with multi-walled carbon nanotubes (CNTs), exfoliated graphite nanoplatelets (xGnPs) and CNT-xGnP hybrid filler were investigated. The EMI SE of the CNT-xGnP hybrid composite was higher than 25 dB at 100 MHz while that of the xGnP based composite was almost zero. The flexural modulus of the CNT-xGnP based epoxy composite continuously increased to 3.32 GPa with combined filler content up to 10 wt% while that of the CNT based epoxy composites slightly decreased to 1.96 GPa at 4 wt% CNT, and dropped to 1.57 GPa at 5 wt% loading, which is lower than that of epoxy. The CNT and CNT-xGnP samples had the same EMI SE at the same surface resistivity, because samples with the same surface conductivity have the same amount of the charge carriers.

The effect of the mixing method on the characteristics of hybrid-structure W powder with nano and micro sizes is investigated. Fine WO3 powders with sizes of ~0.6 μm, prepared by ball milling for 10 h, are mixed with pure W powder with sizes of 12 μm by various mixing process. In the case of simple mixing with ball-milled WO3 and micro sized W powders, WO3 particles are locally present in the form of agglomerates in the surface of large W powders, but in the case of ball milling, a relatively uniform distribution of WO3 particles is exhibited. The microstructural observation reveals that the ball milled WO3 powder, heat-treated at 750oC for 1 h in a hydrogen atmosphere, is fine W particles of ~200 nm or less. The powder mixture prepared by simple mixing and hydrogen reduction exhibits the formation of coarse W particles with agglomeration of the micro sized W powder on the surface. Conversely, in the powder mixture fabricated by ball milling and hydrogen reduction, a uniform distribution of fine W particles forming nano-micro sized hybrid structure is observed.