본 연구는 생후 12개월령의 염소를 사용하여 앞다리, 뒷 다리, 등심 및 갈비 부위로 분할하여 in vitro 소화실험을 통해 부위별 단백질 가수분해도 및 아미노산 조성을 조사 하였다. 이 때, 소고기 및 돼지고기의 분할육을 이용하여 염소고기와 비교, 분석하였다. 염소고기 분할육 중 뒷다리 (8.32%) 및 갈비(8.32%)가 가장 높게 단백질 가수분해도가 나타났으며, 염소고기의 갈비 부위는 갈비 분할육 중 가장 높은 단백질 가수분해율을 보였던 돼지고기(8.57%)와 유의 차가 없었다 (P>0.05). In vitro 소화 전에는 염소고기 분할 육 중 등심에서 글리신(11.03%)이, 앞다리에서 글루타민 (53.44%)이 다른 고기 종류 및 분할육들에 비해 유의적으 로 높은 비율로 포함된 것이 확인되었다(P<0.05). In vitro 소화 후에는 염소고기 갈비 부위에서 라이신(17.54%)이 가 장 높은 비율로 포함된 것으로 확인되었으며, 소 갈비 부 위보다 유의적으로 높았다(P<0.05). 본 연구는 염소고기 분 할육의 단백질 가수분해도 및 아미노산 조성을 제공하며 단백질 소화양상 및 생체 이용률을 평가하기 위한 기초 자 료로써 활용되어질 수 있을 것으로 사료된다.

This paper introduces a container loading problem and proposes a theoretical approach that efficiently solves it. The problem is to determine a proper weight of products loaded on a container that is delivered by third party logistics (3PL) providers. When the company pre-loads products into a container, typically one or two days in advance of its delivery date, various truck weights of 3PL providers and unpredictability of the randomness make it difficult for the company to meet the total weight regulation. Such a randomness is mainly due to physical difference of trucks, fuel level, and personalized equipment/belongings, etc. This paper provides a theoretical methodology that uses historical shipping data to deal with the randomness. The problem is formulated as a stochastic optimization where the truck randomness is reflected by a theoretical distribution. The data analytics solution of the problem is derived, which can be easily applied in practice. Experiments using practical data reveal that the suggested approach results in a significant cost reduction, compared to a simple average heuristic method. This study provides new aspects of the container loading problem and the efficient solving approach, which can be widely applied in diverse industries using 3PL providers.

This study attempts a comparison between AHP(Analytic Hierarchy Process) in which the importance weight is structured by individual subjective values and regression model with importance weight based on statistical theory in determining the importance weight of casual model. The casual model is designed by for students’ satisfaction with university, and SERVQUAL modeling methodology is applied to derive factors affecting students’ satisfaction with university. By comparison of importance weights for regression model and AHP, the following characteristics are observed. 1) the lower the degree of satisfaction of the factor, the higher the importance weight of AHP, 2) the importance weight of AHP has tendency to decrease as the standard deviation(or p-value) increases. degree of decreases. the second sampling is conducted to double-check the above observations. This study empirically checks that the importance weight of AHP has a relationship with the mean and standard deviation(or p-value) of independence variables, but can not reveal how exactly the relationship is. Further research is needed to clarify the relationship with long-term perspective.

Recently, many studies have been conducted to improve quality by applying machine learning models to semiconductor manufacturing process data. However, in the semiconductor manufacturing process, the ratio of good products is much higher than that of defective products, so the problem of data imbalance is serious in terms of machine learning. In addition, since the number of features of data used in machine learning is very large, it is very important to perform machine learning by extracting only important features from among them to increase accuracy and utilization. This study proposes an anomaly detection methodology that can learn excellently despite data imbalance and high-dimensional characteristics of semiconductor process data. The anomaly detection methodology applies the LIME algorithm after applying the SMOTE method and the RFECV method. The proposed methodology analyzes the classification result of the anomaly classification model, detects the cause of the anomaly, and derives a semiconductor process requiring action. The proposed methodology confirmed applicability and feasibility through application of cases.

In a group-testing method, instead of testing a sample, for example, blood individually, a batch of samples are pooled and tested simultaneously. If the pooled test is positive (or defective), each sample is tested individually. However, if negative (or good), the test is terminated at one pooled test because all samples in the batch are negative. This paper considers a queueing system with a two-stage group-testing policy. Samples arrive at the system according to a Poisson process. The system has a single server which starts a two-stage group test in a batch whenever the number of samples in the system reaches exactly a predetermined size. In the first stage, samples are pooled and tested simultaneously. If the pooled test is negative, the test is terminated. However, if positive, the samples are divided into two equally sized subgroups and each subgroup is applied to a group test in the second stage, respectively. The server performs pooled tests and individual tests sequentially. The testing time of a sample and a batch follow general distributions, respectively. In this paper, we derive the steady-state probability generating function of the system size at an arbitrary time, applying a bulk queuing model. In addition, we present queuing performance metrics such as the offered load, output rate, allowable input rate, and mean waiting time. In numerical examples with various prevalence rates, we show that the second-stage group-testing system can be more efficient than a one-stage group-testing system or an individual-testing system in terms of the allowable input rates and the waiting time. The two-stage group-testing system considered in this paper is very simple, so it is expected to be applicable in the field of COVID-19.

As the environmental impacts of fossil fuel energy sources increase, the South Korean government has tried to change non-environmental- friendly enery sources to environmental-friendly energy sources in order to mitigate environmental effects, which lead to global warming and air pollution. With both a limited budget and limited time, it is essential to accurately evaluate the economic and environmental effects of renewable energy projects for the efficient and effective operation of renewable energy plants. Although the traditional economic evaluation methods are not ideal for evaluating the economic impacts of renewable energy projects, they can still be used for this purpose. Renewable energy projects involve many risks due to various uncertainties. For this reason, this study utilizes a real option method, the Geske compound model, to evaluate the renewable energy projects on Jeju Island in terms of economic and environmental values. This study has developed an economic evaluation model based on the Geske compound model to investigate the influences of flexibility and uncertainty factors on the evaluation process. This study further conducts a sensitivity analysis to examine how two uncertainty factors (namely, investment cost and wind energy production) influence the economic and environmental value of renewable energy projects.

To mitigate the environmental impacts of the energy sector, the government of South Korea has made a continuous effort to facilitate the development and commercialization of renewable energy. As a result, the efficiency of renewable energy plants is not a consideration in the potential site selection process. To contribute to the overall sustainability of this increasingly important sector, this study utilizes the Black-Scholes model to evaluate the economic value of potential sites for off-site wind farms, while analyzing the environmental mitigation of these potential sites in terms of carbon emission reduction. In order to incorporate the importance of flexibility and uncertainty factors in the evaluation process, this study has developed a site evaluation model focused on system dynamics and real option approaches that compares the expected revenue and expected cost during the life cycle of off-site wind farm sites. Using sensitivity analysis, this study further investigates two uncertainty factors (namely, investment cost and wind energy production) on the economic value and carbon emission reduction of potential wind farm locations.

2007년 메타버스 로드맵에서 메타버스 정의가 공식 발표된 바 있으며, 당시 국내외 연구자들에 의해 많은 논문이 발표되면서 학문적 이론적으로 정립하려는 노력을 해왔다. 이와는 달리, 산업계에서는 ‘메타버스’키 워드가 비대면 장기화와 맞물려 과열 양상을 보이고 있다. 정작 언급되는 메타버스 성공사례는 '게임'이거나 '게이미피케이션' 또는 ‘게임융합’ 사례가 다수다. 따라서, '메타버스'영역에도 게이미피케이션 이론과 원리의 적용은 바람직하다. 이에, 필자가 발표했던 DMGL 모델을 확장하여, 메타버스 내 습관형성 위한 다이내믹 모델을 제시하였다. 저자는 플레이어 경험을 향상시키기 위해 메타월드 습관 형성을 위한 4가자 양상의 모 델을 제안했다. P1) 플레이어는 세계관에 따라 전개되는 배경스토리를 따르며, 유발된 호기심으로 탐험할 동 기가 생성되고 게임의 조작법을 익히고 게임의 목표를 향하는 여정이다. P2) 플레이어는 메타월드의 조작법 익히기 단계로 온보딩 한다. P3) 플레이어는 아바타 꾸미기,아이템 획득/거래,커뮤니티 활동 등을 수행하면 서, 점차 목적(표)를 향한다. P4) 플레이어는 목적기능을 바로 수행할 수 있는 방식으로 온보딩한다. 이 모델 은 게임의 원리와 요소의 융합(게이미피케이션)으로, 후속연구에서 보다 심도 있는 연구 모델을 제시할 예 정이다.

본 연구는 중국 C2C 중고거래 플랫폼의 사용자 연구대상으 로 정보기술 수용과 사용 태도에 대해 설명력이 높다고 인정받 고 있는 기술수용모델(TAM)을 토대로 핵심 변수 외 다양화된 정보시스템 환경을 반영하는 변수로 주목받고 있는 지각된 유 희성을 추가 변수로 지정하였다. 본 연구는 가설을 검증하기 위해 중국 C2C 중고거래 플랫폼에 대한 경험 있는 사용자들을 대상으로 조사를 실시하였다. 총 400부의 설문지를 배포하였으 며 회수된 설문지를 선별하여 총 362부 유효 설문지가 선출되 었다. 또한, C2C 중고거래 플랫폼 특성 변인인 정보 대칭성을 규명하고, 이를 바탕으로 정보의 이용 가치를 높이고 활성하기 위한 전략 방향에 시사점을 제시하는 데 그 목적을 둔다. 그리 고 마케팅 연구의 학문적 발전에 기여하고 기업에는 중고 플랫 폼을 활용한 마케팅 전략 수립 시 실무적인 도움을 제공할 수 있을 것으로 기대한다.

과학과 기술의 발달로 복합재료, 합금, 고강도 탄소섬유, 고분자 재료 등 지능형 소재가 개발되고 있다. 다양한 엔지 니어링 분야에서 이러한 첨단 재료의 응용을 연구하기 위해 전 세계적으로 광범위한 연구가 진행되고 있다. 초탄성 형상기억합 금(SSMA)은 깃발 모양의 히스테리시스 거동을 가지며 추가적인 열처리 없이 응력 완화로 인한 잔류 변형이 거의 없는 신뢰성 이 높은 내진 재료이다. 그러나 공학 문제에서 SSMA 효율성을 연구하기 위한 수치 모델의 개발은 여전히 어려운 작업이다. 본 연구에서는 SSMA 인장시험의 실험결과를 통해 유한요소해석 프로그램인 Abaqus와 수치해석 프로그램인 OpenSEES를 이용하여 재료 모델을 구현한 후 해석결과의 거동 특성 및 에너지 소산을 분석하였다.

PURPOSES : In this study, surface distress (SD), rutting depth (RD), and international roughness index (IRI) prediction models are developed based on the zones of Incheon and road classes using regression analysis. Regression analysis is conducted based on a correlation analysis between the pavement performance and influencing factors. METHODS : First, Incheon was categorized by zone such as industrial, port, and residential areas, and the roads were categorized into major and sub-major roads. A weather station triangle network for Incheon was developed using the Delaunay triangulation based on the position of the weather station to match the road sections in Incheon and environmental factors. The influencing factors of the road sections were matched Based on the developed triangular network. Meanwhile, based on the matched influencing factors, a model of the current performance of the road pavement in Incheon was developed by performing multiple regression analysis. Sensitivity analysis was conducted using the developed model to determine the influencing factor that affected each performance factor the most significantly. RESULTS : For the SD model, frost days, daily temperature range, rainy days, tropical nights, and minimum temperatures are used as independent variables. Meanwhile, the truck ratio, freeze–thaw days, precipitation days, annual temperature range, and average temperatures are used for the RD model. For the IRI model, the maximum temperature, freeze–thaw days, average temperature, annual precipitation, and wet days are used. Results from the sensitivity analysis show that frost days for the SD model, precipitation days and freeze–thaw days for the RD model, and wet days for the IRI model impose the most significant effects. CONCLUSIONS : We developed a road pavement performance prediction model using multiple regression analysis based on zones in Incheon and road classes. The developed model allows the influencing factors and circumstances to be predicted, thus facilitating road management.

PURPOSES : To efficiently manage pavements, a systematic pavement management system must be established based on regional characteristics. Suppose that the future conditions of a pavement section can be predicted based on data obtained at present. In this case, a more reasonable road maintenance strategy should be established. Hence, a prediction model of the annual surface distress (SD) change for national highway pavements in Gangwon-do, Korea is developed based on influencing factors. METHODS : To develop the model, pavement performance data and influencing factors were obtained. Exploratory data analysis was performed to analyze the data acquired, and the results show that the data were preprocessed. The variables used for model development were selected via correlation analysis, where variables such as surface distress, international roughness index, daily temperature range, and heat wave days were used. Best subset regression was performed, where the candidate model was selected from all possible subsets based on certain criteria. The final model was selected based on an algorithm developed for rational model selection. The sensitivity of the annual SD change was analyzed based on the variables of the final model. RESULTS : The result of the sensitivity analysis shows that the annual SD change is affected by the variables in the following order: surface distress ˃ heat wave days ˃ daily temperature range ˃ international roughness index. CONCLUSIONS : An annual SD change prediction model is developed by considering the present performance, traffic volume, and climatic conditions. The model can facilitate the establishment of a reasonable road maintenance strategy. The prediction accuracy can be improved by obtaining additional data, such as the construction quality, material properties, and pavement thickness.