비보존성 오염물질의 종확산에 관한 수치모형을 개발하였다. 계산기법으로는 종확산 방정식을 이송, 감쇠 및 확산 방정식으로 분리하고, 이들 방정식을 1/3 시간 간격에 대하여 번갈아 계산하는 단계분리 유한차분기법을 사용하였다. 이송방정식에 대해서는 Holly-Preissmann 기법을, 감쇠방정식에 대해서는 해석적 방법을, 확산방정식에 대해서는 Crank-Nicholson 기법을 각각 사용하였다. 오염물질이 불균일 흐름 내로 연속적으로 유입되는 경우 및 균

We will calculate concentration of air pollutants using ISCST3, FDM and AERMOD of models recommended in U. S. EPA which are able to predict concentration of short term for point source, complex like industrial complex, power plant and burn-up institution. Before executing model, as analyzing computational result of many cases according to selecting of input data, we will increasing predictable ability of model in limit range of model. Especially, we analyzed three cases - case of considering various emission rate according to time scale and not, case considering effect of atmospheric pollution materials removed by physical process. In our study, after comparing and analyzing results of three model, we choose the atmospheric dispersion model reflected well the characteristic of the area. And we will investigate how large the complex pollutant sources such as industrial complex contribute to atmospheric environment and air quality of the surrounding the area as predicting and estimating chosen model.

The purpose of this study is providing basic data to control the air pollutants from solid waste incinerator. Incinerating the waste wood, the electrostatic precipitator had the best collection efficiency. The leather incineration had the same collection efficiency as synthetic resin incineration. And the coarse particle collection efficiency was high. As you know in correlation of leather incineration, pollutants produced a from incinerator are mostly fine particles. If the scrubber used only in the process produced a lot of fine particles. It is adequate to use the above control devices, together with high efficiency collector like bag-filter. To select the adequate control devices, it is required to investigate the size distribution before establishing control devices.

Air quality modeling about coastal urban region such as Pusan shoud be consider shipping source emmited from ships anchoraging and running. It has been proved at our previous studies that the ratios of air pollutants emission amount in coastal area to inland are 12.2% for NO2 and 11.7% for SO2 and the air quality of coastal urban area consierably counts on ships. Also the dispersion pattern of the air pollutants followed local circulation system in this region. Therefore this study has been developed air quality model which can describe the formation, transport, transformation and deposition processes of air pollutants considering shipping source. Currently, restriction for emission amount of ships does not exist, so our study will be useful to set the emission standard and for devising air quality policy in coastal urban region.

This study identified concentrations of air pollutants emitted from idling of vehicles such as cars, taxis, trucks, and buses. In this investigation we analyzed concentrations of SO2, NOx, CO, and CO2 emitted from exhaust pipe of vehicles as a function of vehicle type, mileage, exhaust volume, and fuel type using the GreenLine. Compact or light cars, which have relatively low exhaust volume, showed much higher exhaust concentrations of SO2, CO, and NOx than those emitted from vehicles with high exhaust volume. Vehicles using light oil showed much higher exhaust NOx concentrations than those of vehicles using gasoline. Vehicles using LPG and compact cars showed very high exhaust CO concentration compared to other vehicles. NOx exhaust concentrations were increased with increasing the mileage of vehicles.

This study was performed to determine the optimum coagulant dosing amount for effective treatment of raw water. The removal rate of turbidity and the variations of water qualities according to various dosage of coagulants such as Alum, PAC and PACS were investigated. The optimum coagulant dosing amount to make the lowest turbidity of water were 35㎎/ℓ of Alum, 30㎎/ℓ of PAC and l0㎎/ℓ of PACS in case of 5 NTU of raw water turbidity, and 30㎎/ℓ of Alum, 25㎎/ℓ of PAC and l0㎎/ℓ of PACS in case of 10 NTU of that, respectively. The removal rates of turbidity at 4 min. and 8 min. of settling time were 10 and 72% of Alum, 44 and 62% of PAC and 25 and 55% of PACS in case of 5 NTU, and 52 and 70% of Alum, 90 and 95% of PAC and 10 and 28% of PACS in case of 10 NTU, respectively. Judging from the settling capability of floc., the reaction time of floc. formation and removal efficiency of turbidity, PAC was evaluated as more effective coagulant than Alum and PACS. Also PAC was regarded as the most effective coagulant when the water supply was changed sharply and the fluctuation of the surface loading occured with wide and sharp in seettling basin. pH and alkalinity of the water were decreased with increasing coagulants dosage. But pH and alkalinity were not decreased below 5.8 which is the standard for drinking water quality, and l0㎎/ℓ which is the limit concentration of floc. breakage, respectively. Residual Al of the treated water was decreased with increasing coagulants dosage in case of 5 and 10NTU of raw water turbidity. KMnO_4 consumption of the water was decreased with increasing coagulants dosage. The reduction rate of KMnO_4 consumption at the optimum coagulants dosage were 39% of Alum, 18% of PAC and 11% of PACS in case of 5 NTU of raw water turbidity, and 42% of Alum, 27% of PAC and 36% of PACS in case of 10 NTU of that, respectively. Any relationship was not found between the removal rate of turbidity and KMnO_4 consumption. TOC of the water was a bit decreased with increasing coagulants dosage up to 30㎎/ℓ but not changed above 30㎎/ℓ of coagulants dosage. The degree of TOC reduction was increased in the order of Alum, PAC and PACS treatment. Zeta potential of the colloidal floc. at the optimum coagulants dosage was in the range of -20∼-15mV in case of 5 NTU of raw water turbidity and 0∼0.5mV in case of 10 NTU of that, respectively. Although the kinds and dosages of coagulants were different, zeta potential range were fixed under the conditions of the best coagulation efficiency.

This study is to find out the emission estimation in Kimhae area. For this purpose, the Kimhae statistical yearbook and data of waste facilities issued by Kimhae city and the report on energy census issued by the ministry of trade, industry and energy are used. Each item for the emission estimation is SO_2, CO, HC, NOx, TSP from point, line, area sources. The results were as follows; The air pollutants with the highest amount of emission from the emission sources is CO followed by NOx, SO_2, TSP, HC in descending order of magnitude. The emission consists of 66.15% of line, 24.65% of area and 9.20% of point sources at Kimhae.

This study estimate the degree of contamination in the streamwater around the Sudokwon landfill site. It was sampled at 10 sites in Jan., Apr., Jul. and Oct., 1996. There were analyzed five kinds of toxic chemical material-CN, ABS, PCB, As, Org-P, and four kinds of heavy metal-Pb, Hg, Cd, C_r^+6. The result are 1)The COD was generally increased to compare before landfill, 2)The Org-P and PCB were not detected at all points, 3)The concentrations of Pb, C_r^+6 and As were lower than the environmental criteria values, 4)The CN, Hg and Cd were over envirommental criteria values, and so emergent regulation is needed, 5)The effects of the streamwater contamination were not only the leachate of the landfill, but also the small factories and agricultural land around the landfill.

균열 암반 매질에서의 지하수 흐름과 오염물질 이송에 대한 수치모의 실험이 hydromechanic 모형과 추계적 그리고 이산적 3차원 균열망 모형에 바탕을 둔 비정상상태 흐름 수치 모형을 이용하여 수행되었다. 오염물질 이송에 대한 수치모의 실험에서 random walk의 일종인 particle following 알고리즘이 사용되었다. 이 연구의 목적은 지하 깊은 곳에 위치한 Hot dry rock에서의 지열 개발을 위해 프랑스 Soultz sous Fo

The oil crisis of the 1970s and the rise in oil prices motivated people to implement energy conservation strategies. Buildings were fitted with additional insulation and reduced ventilation rates. The reduction of mechanical and natural ventilation rate led to increases in indoor pollutant concentrations which resulted in increased health risks from indoor exposure to pollutants. The variable-air-volume/bypass filtration system(VAV/BPFS) is a variation of the conventional VAV systems, The VAV/BPFS is an electronically controlled system that provides cost-effective thermal comfort and acceptable indoor air quality. Under controlled conditions in a chamber, a series experiments were performed to compare the ability of a VAV/BPFS to remove indoor aerosol concentration and to reduce energy consumption with that ability of conventional VAV system. Results show that the VAV/BPFS increases the effective ventilation rate and removes indoor air pollutant, and maintains acceptable indoor air quality without sacrificing energy consumption.

본 연구는 도시하천인 한강 하류부에 2차원 유한요소모형을 적용하여 하천의 수리학적 특성에 따른 오염물질의 거동특성을 모의하고 예측하기 위한 것으로서 흐름상태를 분석할 수 있는 RMA-2V 모형과 동적 수질예측이 가능한 RMA-4모형을 이용하였다. 2차원 유한요소모형을 사용하여 수질의 거동특성을 모의하여 본 결과 유량 및 유속의 변화는 오염물질의 이송확산에 큰 영향을 미치는 것으로 나타났으며, 탄천 및 중랑천은 대상구역내의 수질오염에 큰 영향을 미치는 것

To predict diffusion and movement of air pollutants in coastal urban region a numerical simulation shoud be consider atmospheric flow field with land-sea breeze, mountain-valley wind and urban effects. In this study we used Lagrangian particle dispersion method in the atmospheric flow field of Pusan coastal region to depict diffusion and movement of the pollutants emited from particular sources and employed two grid system, one for large scale calculating region with the coarse mesh grid (CMG) and the other for the small region with the fine mesh grid (FMG). It was found that the dispersion pattern of the pollutants followed local circulation system in coastal urban area and while air pollutants exhausted from Sasang moved into Baekyang and Jang moutain, air pollutants from Janglim moved into Hwameong-dong region.

In the Atmosphere under the various physical and chemical condition different chemical reactions occur and there are a number of air pollutants which are generated by photochemical reaction by absorbing solar energy. Therefor various testing simulation was done as foundation work to develop the numerical model for the prediction of concentration of air pollutants. It was shown change of major air pollutants concentration in according to variation of photodissociation speed constant, K_1 and initial condition of air pollutants concentration which plays major role in photochemical reaction. The photochemical reaction model which was used in this study is found to be useful for understanding relationship among the concentration of reacting air pollutants and the prediction of concentration of air pollutants in urban atmosphere

This study was performed to investigate the relationship between concentrations of heavy metals in sediment and the depths of 27 sampling sites along the West Nakdong river in downstream of Nakdong River. The deepest site was Kangdong bridge nearby 20ft. From here, the depth was shallowed to Chidong gradually. In each site the smaller mesh was, the higer concentration of heavy metal becomed. Concentration of Zn, Cd, Cr and Cu at inflow point of Shinoe stream was 576.016 ppm, 262.307 ppm, 68.674 ppm and 61.634 ppm, respectively, the concentration was the higest at this point. From here, it was lowered gradually. The concentration of heavy metal at inflow point of Joman river was 155.328 ppm, 56.485 ppm, 25.200 ppm and 31.172 ppm, respectively, those concentrations were higer than other points with the exception of Shinoe stream. Therefore, Joman river and Shinoe stream were the major source of pollution in West Nakdong river. Among two sources Shinoe stream was more important source of pollution. West Nakdong river has become lake by Noksan floodgate because it`s pollution has had influence on Bonglim.

A numerical model has been developed to predict the deposition of air pollutants considering canopy effect. In this model, the deposition velocity is calculated using the deposition resistances(aerodynamic resistance, viscosity resistance, surface resistance). Using the results, a comparative study was made between the model calculation and observation results The calculated daily variation of deposition resistances and in daytime most of the model cases are well agreed with observation results, and a slight difference was found in nighttime. From the results, it is suggested that the present model is capable of estimating the deposition velocity of air pollutants considering characteristics of canopy layer.