The logistics cost in Korea is very higher than that of the other countries. Thus, we propose to the way to reduce company's logistics cost in the paper industry. Each company in the paper industry is having its particular sized pallets and using them to manufactured products, store, deliver, retrieve empty pallet and so on. In this reason, the logistics cost is still increasing. As the common introduction of Pallet Pool System to "Paper Industry", the logistics cost could be reduced up to 24% and 1.8 billion won saved approximately, and it possibly attributes to the increase of company profit and the strength of the company competitiveness.itiveness.

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and quality control are very important to supply with a product uniformly and inexpensively. Process co

본 논문에서는 강상자형교의 바닥판과 주형에 대한 생애주기비용(Life-Cycle Cost : LCC)를 고려한 최적설계 방법을 제안하였다. 생애주기비용의 최적설계 문제는 초기비용, 유지관리비용 그리고 강도와 처짐 그리고 균열에 대한 파손 기대비용의 최소화 문제로 정식화할 수 있다. 기존의 재래적인 설계방법과의 비교를 동해서 강상자형교의 생애주기비용 최적설계의 우수성을 입증하였다. 또한 수치적인 결과의 고찰을 통하여 LCC에 근거한 최적설계가 여타의 설계방법들보다 좀 더 합리적이고 경제적이며 안전한 설계를 유도하는 것으로 분석되었다.

The purposes of this study were to a) find out the operational characteristics of the contract-managed highschool foodservice in Seoul, b) investigate the expected level of meal-price and facilities investment cost perceived by contract-managed highschool foodservice managers c) compare the present level and expected level of meal-price and facilities investment cost. From October 12 to November 13 in 2001, the questionnaires were mailed to 249 high schools which was managed by contract foodservice company with respondent rate 40.2%. Data were analyzed using SPSS Win(10.0) for descriptive analysis and one group paired t-test. The results of this study were as follows ; 1. The student enrollment of highschools run by contract-managed foodservice was 1,243 with 72.6% participation rate of school lunch program. The average meal-price was 2,138 won. The average annual period of school foodservice operation was 156.78 days per year. The average contracting period was about 3 years. 2. The average cost concerned in the facilities investment amounts 169,578,180 won at the initial investment and 25,204,092 won at the repairs and maintenance cost in the course of operation. 3. The present level of meal-price and facilities investment cost were respectively 2,136won/meal and 171,157,336.72 won. And expected level of meal-price and amount of facilities investment cost were 2,418.75 won and 121,353,215.19 won. Comparing the present level with the expected level of the meal- price and facilities investment cost, expected level of meal-price was significantly higher than the present level of meal-price(p<.001) and expected level of facilities investment cost was significantly lower than present level of facilities investment cost(p<.001).

The supply chain not only includes the manufacturer and suppliers, but also transporters, warehouses, retailers, and customers themselves. Within each organization, such as manufacturer, the supply chain includes all functions involved in filling a customer request. these functions include, but are not limited to, new product development, marketing, operation, distribution, finance, and customer service. Lean Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is development of model and cost analysis to the modular production system in Lean SCM. Introduction of modular production system in Lean SCM is effective in reducing the cost in processing, manufacturing, inventory holding, ordering, etc.

The quantitative evaluation method of the safety management cost was suggested to prevent a gas accident as a major industrial accident. In a gas governor station, process risk assessments such as the fault tree analysis(FTA) and the consequence analysis were performed. Based on process risk assessments, potential accident costs were estimated and the cost-benefit analysis(CBA) was performed. From the cost-benefit analysis for five classification items of safety management cost, the order of the cost/benefit ratio was estimated.

The 5 working day's a week increase to fixed cost. Specially, the small ＆ medium size company more increase to manufacturing cost. The introduction of 5 working day's rule influence to labor cost in manufacturing cost. Also, it make disappear to fixed cost of 0.5 working day. Almost manufacturing company expect to have difficulty in product cost. The case of japan, many manufacturing company move to Asian countries after introduction of 5 working day's a week rule. The purpose of this study are the analysis of change product cost and suggest to solutions for a type of industries.

This paper presents an analytic method of quality function deployment(QFD) that is to maximize customer satisfaction subject to technical and economic sides in process design. We have used Wasserman's normalization method and the analytical hierarchy process(AHP) to determine the intensity of the relationship between customer requirements and process design attributes. This paper also shows cost-quality model the tradeoff between quality and cost as a linear programming(LP) with new constraints that have designated special process required allocating firstly. The cost-quality function deployment of piston ring is presented to illustrate the feasibility of such techniques.

This paper deals with the problem of determining the buyer's economic lot sizing policy for exponentially deteriorating products under trade credit. It is also assumed that the ordering cost consists of a fixed set-up cost and a freight cost, where the freight cost has a quantity discount offered due to the economies of scale. We formulate the mathematical model and the solution algorithm is developed based on the properties of an optimal solution.

This paper presents an analytic method of quality function deployment(QFD) that is to maximize customer satisfaction subject to technical and economic sides in process design. We have used Wasserman's normalization method and the analytical hierarchy process(AHP) to determine the intensity of the relationship between customer requirements and process design attributes. This paper also shows cost-quality model the tradeoff between quality and cost as a linear programming(LP) with new constraints that have designated special process required allocating firstly The cost-quality function deployment of piston ring is presented to illustrate the feasibility of such techniques.

Physiological Cost Index (PCI) of walking has been widely used to predict oxygen consumption in healthy subjects or patients. The purpose of this study was to evaluate the predictability of physiological cost index of walking for the amount of exercise and cardiac function. Walking exercise was conducted in 67 healthy children (age 4-12) with a self-selected comfortable walking speed on the level surface. Walking speed was calculated, and heart rate was measured before and immediately after the walking. PCI was calculated for statistical analysis. The results were as follows; 1) The walking speed tends to increase and PCI of walking tends to decrease with age. There was significant difference in walking speed and PCI of walking among three age groups (p<.05). The change of walking heart rate tends to decrease with age, however, there was no significant difference among three age groups. 2) Linear regression equation between walking speed and age was 'Y (walking speed) = 2.124X (age) + 48.286' (=.337), (p=.00). 3) The walking heart rate tends to decrease with age. Linear regression equation between walking heart rate and age was 'Y (walking heart rate) = 143.346 - 2.63X (age)' (=.3425), (p=.00). 4) The walking heart rate decreased as body surface area (BSA) increased. Linear regression equation between walking heart rate and BSA was 'Y (walking heart rate) = 149.830 - 27.115X (BSA)' (=.3066), (p=.00). In conclusion, these equations and PCI could be useful to quantify the variation of energy expenditure of children with pathological gait when compared with age-matched healthy children.

The introduction of coastal vessel traffic services enables vessels in coastal waters to navigate in safety or to get her position with ease and prevents the vessel from becoming cause of casualties. But it needs relatively huge amount of cost to construct and operate and maintain. Thus we must be checked with economical adequacy of the the proposed coastal vessel traffic services by comparing the cost of the construction, operation and maintenance with the expected benefit made by the expected decrease in marine casualties. In previous paper, a proper cost-benefit analysis model for the Korean practice will be suggested. In this Paper, the proposed the cost-benefit analysis model of coastal vessel traffic services was applied to the Koje coastal waters 20mi1es from the top of Maemul-Do and Yokchi-Do. As the result, we confirmed the propriety of the cost-benefit analysis with the application of the proposed model to Koje waters. Also, it is verified that the introduction of coastal vessel traffic services, as proposed, is adequate and economical. The cost-benefit analysis model proposed in this study could be used to investigate the economic Propriety of new aids to navigation and traffic safety facilities in the future.

The capital cost of the company is one that must be paid to the money owner as the price by using the money. The capital cost according to the source of money supply can be estimated by the expected profit rate undertaken by the use of the capital. But in the area of pre-existent economic evaluation, the evaluation of the company investment has been treated by the profit rate of the capital after considering the repayment conditions of the other's money or the interest. Thus in this study, in case the company makes an investment on various kinds of the capital at the same time, not make use of the capital as a one source, the economic evaluation of an investment should be handled by taking the weighted average cost of capital into consideration in proportion to the constitution of the capital cost by the sources of money supply, Especially, as the cost of the private money is very much connected with the profit rate through the stock market, the Capital Asset Pricing Model (CAPM) will be applied. This kind of economic evaluation method can be said to have much to do with the Economic Value Added : EVA) as well as to be highly thought as a standard to estimate the company' value recently To certify the usefulness of this approach, the case study of the output of the capital cost will be made for the purse of the economic evaluation of the alternative investment by using the financial statements of a motor company H.

Cost-benefit analysis was investigated to propose the analysis method of the effect of investment and the optimum investment level of safety management cost for preventing gas accident in the B governor station. From five classifications of safety management costs consisting of cost items with similar characters and potential accident costs calculated by risk assessments(FMEA/HAZOP), we found that the order of the benefit(the reduction cost of the potential accident cost) was the instrument increase and repair cost > the safety checking and inspection cost > the labor and training cost > the safety equipment and corresponding cost > the research and development cost. As the benefit was increased with increasing the investment cost, the effect of investment was increased with decreasing the Investment cost. As a result, the optimum safety management cost was estimated and the investment level was analyzed by the model of optimum investment level.

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, tile development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.