검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 50

        21.
        2007.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        3차원 생태계 모델(EMT-3D)을 사용하여 도쿄만의 PFOA을 대상으로 그 적용성을 검토하였으며, 민감도 분석 및 시나리오 분석을 행하여 영향인자를 판별하고 대안에 따른 영향을 평가하였다. 계산치와 대상해역 실측치간의 R값과 R2값이 각각 0.7115~0.8759와 0.5062~0.7672로 계산되어 모델의 재현성은 비교적 양호한 것으로 나타났다. 민감도 분석결과 용존 PFOA의 경우 계수 변화에 따른 농도변화는 미미한 것으로 나타났으며, 입자성유기물질중 PFOA는 분배계수, 흡착속도, 퇴적속도의 영향이, 식물플랑크톤 체내의 PFOA는 생물농축계수, 섭취속도, 분배계수의 영향이 큰 것으로 나타났다. PFOA에 대한 모델 적용 시에는 목적하는 상태함수에 따라 이들 계수에 대한 정밀한 고찰이 필요할 것으로 사료된다. 도쿄만 인근의 각 지역별 하수처리장으로부터의 유입부하 삭감에 따른 변화는 미미한 것으로 평가되었으며, 각 지역의 하천으로부터 공급되는 PFOA량을 감소시킨 경우는 표층의 경우는 도쿄, 저층의 경우는 치바로부터의 유입부하를 줄였을 경우가 변화가 가장 큰 것으로 나타났다.
        4,000원
        27.
        2001.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The assembly tolerance design methods have applied linear or nonlinear programming methods and used simulation method and search algorithms to optimize the tolerance allocation of each part in an assembly. However, those methods are only considered to the relationship between tolerance and manufacturing cost, which do not consider a quality loss cost for each part tolerance. In this paper, the integrated simulation model used genetic algorithm and the Monte-Carlo simulation method was developed for the allocation of the optimal tolerance considering the manufacturing cost and quality loss cost.
        4,000원
        30.
        2000.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Effect of ball filling ratio on the behavior of balls motion and their collision characteristic in a tumbler-ball milling of metal powder are investigated by a computer simulation. The discrete element method and the extended Kelvin model composed of nonlinear spring and nonlinear dashpot were employed in the simulation. It can be possible that analysis of the individual balls motion in a three-dimensional actual mill by the two-dimensional model simulation, since the simulated trajectories of ball paths are in relatively good agreement with the actual ones. It knows that the balls motion in the tumbler-ball mill is strongly influenced by the surface conditions of the balls and mill container wall. The energy consumption of the individual balls during impact and the impact frequency of the individual balls increased with an increase in the ball filling ratio and showed maximum values at about 50-60% ball filling ratio, and then decreased.
        4,000원
        32.
        2000.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Inchon Port is the second largest import-export port of Korea, and has the point at issue such as the excessive logistics cost because of the limits of handling capacity and the chronic demurrage. The purpose of this paper is to develop the simulation program as a long-term strategic support tool, considering the dual dock system and the TOC(Terminal Operation Company) system executed since March, 1997 in Inchon Port. The basic input parameters such as arrival intervals, cargo tons, service rates are analyzed and the probability density functions for these parameters are estimated. From the simulation model, it is possible to estimate the demurrage status through analyzing various scenarios and to establish the long-term port strategic plan.
        4,200원
        33.
        2000.05 구독 인증기관 무료, 개인회원 유료
        We have been suffered from a large-scaled accidents in construction fields so far, despite a fact that more effort has been made for accident decrease. But the most important factor not to prevent those from the site is that past management technique has not been based on its related site, up to now. Three projects have been selected for comparing the previous condition with the one which this proposed technique has been applicated for. Also, individual interview with 113 workers has been done simultaneously.
        4,200원
        34.
        2000.01 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A three-dimensional digital image processing technique is proposed to quantitatively predict the dispersion phenomena of oil droplet onto the surface of the water. This technique is able to get the dispersion rate of an oil droplet three-dimensionally just below the surface of the water over time. The obtained dispersion rate obtained through this technique is informative to the investigation into the relationship among the gravity, surface tensions between oil, water, and air. This technique is based upon the three-dimensional PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a three CCD(Charge Coupled Device) cameras, an image grabber, and a host computer in which an image processing algorithm is adopted for the acquisition of dispersion rate oil an oil droplet.
        4,000원
        37.
        2018.10 KCI 등재 서비스 종료(열람 제한)
        실시간 그래픽스 응용에서 연체의 움직임을 효율적으로 생성하기 위해 다양한 방법이 제안되었다. 연 체 구성 요소들의 위상을 유지하기 위해서는 서로를 묶는 힘이 존재할 수밖에 없으며, 이는 강직도 (stiffness)로서 수치적분의 시간간격의 크기를 제한하고 효율성을 떨어트린다. 이를 해결하기 위해 시간간 격을 늘릴 수 있는 암시적 적분이 제안되었지만, 대규모 행렬이 포함된 선형시스템을 풀어야 해서 계산복 잡도가 크게 높아진다. 이 문제를 개선한 근사 기법들은 댐핑 효과의 증가와 정확성의 손실을 초래할 수 밖에 없다. 본 논문에서는 선형시스템을 풀지 않고도 안정성은 크게 높이기 위해 조화진동에 근거하여 스 프링 힘을 적분하고, 이를 근사 암시적 기법과 결합하여 안정성을 극대화 하는 방법을 제안한다. 이 기법 은 GPU를 통한 병렬화가 용이하여 거대한 규모를 가진 연체 객체의 움직임을 실시간에 생성할 수 있다.
        38.
        2018.04 KCI 등재 서비스 종료(열람 제한)
        방사선 방호의 목적 중 하나는 확률적 영향을 최소화 하는 것이다. PCXMC 2.0은 몬테카를로 시뮬레이션 기반의 프로그램으로 입사표면선량을 통해 유효선량과 암의 발병확률을 예측가능하게 해준다. 그렇기 때문에 선량계에 따른 입사표면선량 측정이 특히 중요하다. 본 연구는 반도체 선량계, 일반 선량계, 유리선량계를 통해 입사표면선량을 측정하고 그에 따른 결정 장기의 유효선량과 발병 확률을 비교분석 하는 것에 목적을 두었다. 실험방법은 두개부, 흉부, 복부의 선량계 별 입사표면선량을 측정하고 PCXMC 2.0을 통해 부위 별 결정 장기의 유효선량과 암의 발병 확률을 평가하였다. 그 결과 부위 별 입사표면선량은 동일한 조건임에도 일반 선량계, 반도체 선량계, 유리 선량계 순으로 차이가 났다. 이를 토대로 유효선량과 결정 장기의 암 발병 확률을 분석한 결과 또한 일반 선량계, 반도체 선량계, 유리 선량계 순으로 차이가 났다. 결론적으로 동일한 조건임에도 사용한 선량계에 따라 유효선량과 발병 위험도는 다르게 나타났음을 알 수 있었고, 본 연구를 통해 각각의 선량계에 따른 정확한 입사표면선량 모델을 제시하는 것이 중요하다는 것을 알 수 있었다.
        39.
        2017.06 KCI 등재 서비스 종료(열람 제한)
        The Weather Research and Forecasting (WRF) model and Vegetation Photosynthesis and Respiration Model (VPRM) were coupled to simulate atmospheric CO2 concentrations. The performance of the WRF-VPRM to simulate regional scale CO2 concentration was estimated over coastal basin areas. Either Hestia 2011(HST) or Vulcan 2002(VUL) anthropogenic CO2 emission data were used in two numerical experiments for the study regions. Simulated meteorological variables were validated with ground and background CO2 measurement data, and the results show that the model captured temporal variations of CO2 concentration on a daily basis. CO2 directional analysis revealed that the dominant CO2 emission sources are located S and SW. The simulated Net Ecosystem Exchange (NEE) agreed relatively well with measured CO2 fluxes at each vegetation class site, showing approximately 40% at max improvement at shrub areas.
        40.
        2016.12 KCI 등재 서비스 종료(열람 제한)
        컨테이너 터미널에서 육상 운송을 담당하는 트럭 운송사 입장에서의 트럭 대기 시간을 줄이기 위한 게이트 시뮬레이션 모델을 개 발하였다. 개발 모델의 검증을 위하여 부산신항 P항만을 대상으로 2014년 12월의 4주간 트럭 진출입 자료를 적용한 결과, 99% 이상의 정확성 을 보였다. 또한, 개발한 시뮬레이션 모델을 통해 기존 게이트 시스템과 최근 게이트 시스템을 비교해 보았다. 결과적으로 동쪽 진입 게이트 기준으로 기존 게이트 시스템에서는 최대 50대의 트럭 대기와 120분의 대기 시간이 발생하였으나, 신규 게이트 시스템에서는 최대 10대의 트 럭 대기와 5.3분의 대기 시간이 소요되었다. 서쪽 진입 게이트 기준으로 기존 게이트 시스템에서는 최대 17대의 트럭 대기와 34분의 대기 시 간이 발생하였으나, 신규 게이트 시스템에서는 최대 10대의 트럭 대기와 5.3분의 대기 시간이 소요되었다. 서쪽 진출 게이트 기준으로 기존 게이트 시스템에서는 최대 11대의 트럭 대기와 5.5분의 대기 시간이 발생하였으나, 신규 게이트 시스템에서는 최대 9대의 트럭 대기와 4.4분 의 대기 시간이 소요되었다. 본 개발 모델을 통하여 각 게이트의 트럭당 진출입 처리 시간에 따라 어느 정도의 트럭 대기가 발생하는지를 파 악할 수 있게 되었다. 또한, 각 게이트에서 트럭 진출입에 따른 트럭당 처리 시간을 여러 시나리오별로 시뮬레이션하여 트럭의 대기가 발생되 지 않는 최적 게이트 시스템의 운영 기준을 찾는데 활용될 수 있다.
        1 2 3