The torque shear high strength bolt is clamped normally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the required tension, as it considerably fluctuates due to torque coefficient dependent on lubricant affected temperature. In this study, the clamping tests of torque shear bolts were conducted independently at indoor conditions and at construction site conditions. During last six years, temperature of candidated site conditions was recorded from -11℃ to 34℃. The indoor temperature condition was ranged from -1 0℃ to 50℃ at each 10℃ interval. As for site conditions, the clamping force was reached in the range from 159 to 210 kN and the torque value was from 405 to 556 Nㆍm. The range of torque coefficient at indoor conditions was analyzed from 0.126 to 0.158 while tensions were indicated from 179 to 192 kN. The torque coefficient at site conditions was ranged from 0.118 to 0.152. Based on this test, the variable trends of torque coefficient, tension subjected temperature can be taken by statistic regressive analysis. The variable of torque coefficient under the indoor conditions is 0.13%/℃ while it reaches 2.73%/℃ at actual site conditions. When the indoor trends and site conditions is combined, the modified variable of torque coefficient can be expected as 0.2% /℃. and the modified variable of tension can be determined as 0.18%/℃.

파프리카는 수분에 민감한 작물이므로 작물의 생산성 향상을 위하여 적정 관수조절은 매우 중요하다. 광환경 조건은 시설재배에서 여러 환경 변수 중 조절이 용이하지 못하며, 지역 별, 계절 별 분포가 다르기 때문에 광 환경 데이터를 이용한 증산과 관수의 추정이 필요하다. 본 연구에서는 파프리카의 정확한 증산 예측을 위하여 변형된 증산 추정식을 활용하였다. 또한 기상청의 광도 자료를 활용하여 지역 별 증산량과 관수량을 비교하였다. 우리나라의 경우 여름철 하루 중 광도의 편차가 심하고 장마기간이 있으므로 봄, 가을에 비하여 증산량이 오히려 낮았다. 그리고 광주기가 길어지는 봄에 증산량이 가장 많았으므로, 이 시기의 데이터를 이용하여 관수시설 용량을 지역별로 제시할 수 있었다. 이러한 결과는 시설 재배에서 관수설비 기준제시를 위한 자료 및 투입에너지 최적화에도 유용하게 활용될 것으로 판단된다.

수출용 온실 단지로 기대되는 간척지의 광환경은 해무 등에 의해 내륙과는 다른 광환경 특성을 나타낸다. 이러한 간척지에서 온실 설계 기준을 작성하기 위해서 산란 광과 직달광을 고려한 온실 내 광분포 연구가 필요하다. 본 연구에서는 간척지의 고유의 광환경 특성을 분석하고 3-D 온실 모델에 적용하여 간척지의 온실 내 공간적인 광분포를 추정하고자 하였다. 먼저 간척지의 일사량을 산란광과 직달광으로 구분하여 측정하고 내륙의 일사량과 비교하였다. 또한 간척지 지역에 설치된 온실 내의 광분포를 측정하고 이를 시뮬레이션을 통해 계산된 값과 비교함으로써 3-D 온실 모델에 대한 검증을 실시하였다. 간척지는 내륙에 비하여 전체 일사량에 대비 높은 산란광의 비율을 나타내었으며, 특히 일출 및 일몰 부근에서 크게 나타났다. 3-D 온실 모델에 의한 온실 내 예측 광 분포는 실제 간척지의 온실 내 광분포와 유사하게 나타 났다. 검증된 3-D 온실 모델을 통하여 임의의 외부 광조 건에 대하여 간척지 지역의 온실 내부의 시간적인 평균 광도의 변화와 광분포를 예측할 수 있었다. 이러한 결과는 간척지 지역의 온실 내 광환경 해석 이외에도 작물의 수광량 해석에도 유용하게 활용될 것으로 예상된다.

본 연구에서는 모델 기반의 온실 환경 제어에 활용될 수 있는 미기상 환경 예측 모형을 개발하고자 하였다. 전산유체역학 시뮬레이션을 활용하여 다양한 기상 조건과 온실의 환기 구조에 따른 온실 내부의 미기상 변화와 환기창에서의 환기량 변화를 모의하고, 다중회귀분석을 통해 수치 모형을 제시하였다. 비정상상태의 환기 작용을 모의한 결과, 환기창 개방 후 환기 효과가 완전히 나타나기까지는 3분 ~ 20분 정도의 시간이 소요될 수 있는 것으로 나타났다. 기존의 센서 실측에 기반을 둔 대부분의 환경 조절 제어 시스템의 경우에는 측정값에 따른 피드백에 의해 환경 제어가 동작하므로 온실 내부의 기온이 상승한 이후에 환경 제어를 시작하게 되지만, 모델 기반의 환경 조절 제어 시스템을 도입하면 이러한 3분~20분 정도의 시간을 사전에 고려하여 적정 환경을 제어할 수 있도록 미리 환기창의 조작이 이루어지게 된다. 작은 규모의 온실에서 는 이러한 영향이 미비할 수 있지만, 근래에 증가하고 있는 대규모 온실들에 대해서는 온실 내부 작물 재배 환경의 균일성과 적정성, 안정성을 확보하고 환경 조절의 경제성을 추구할 수 있는 모델 기반의 환경 조절 시스템이 필수적이다. 본 연구에서 제시된 수치 모형들은 외부의 기온과 풍속, 지면 온도, 일사량 등의 기상 환경과 온실의 천창 개폐율에 따라 유도되는 자연 환기의 성능을 온실 내 미기상 변화와 환기창을 통한 환기량 값으로 제시하고 있으며, 전산유체역학 시뮬레이션 결과와 비교하여 각각 58% ~ 92%, 76% ~ 93%의 예측력을 보였다. 미기상의 변화는 온실을 9개의 세부 영역으로 구분하여 각 영역 에서의 기온 하락 정도로 나타내며, 환기량은 지붕에 형성된 6개의 천창에서의 공기 유출입량을 각각 제시하여 준다. 환기 작용에 의한 미기상의 변화는 반드시 환기창에서의 환기량에 의해 예측되지는 않으므로 환기량과 환기의 효과를 구분하여 적용하는 것이 중요할 것이다. 이러한 수치 모형들은 모델 기반 환경 제어 시스템에서 가상의 환기창 동작에 따른 환기 성능을 예측하는데 활용될 수 있으며, 전산유체역학 시뮬레이션과 같은 매우 복잡한 예측 모델이 비해 상당히 간단한 형태로 이루어져 있어 빠른 계산 시간을 보장한다. 이는 실시간 제어의 관점에서는 복잡한 예측 모델들에 비해 실시간 예측 과 제어가 가능하다는 큰 장점을 가져다준다. 본 연구를 통해 개발되고 시도된 결과들은 모델 기반의 온실 복합 환경 제어 시스템을 위한 알고리즘을 개발하는데 활용될 것이다. 또한 이러한 활용은 농업에 IT 기술을 접목하여 농가의 노동력 부족을 극복하고 생산성 향상과 경쟁력 확보를 도모하는 농업 선진화에 기여할 것으로 기대된다.

Hazardous air pollutants such as NO2, VOCs and PM10 were measured Daegu, Korea in major micro-environments,where housewives spend the most of their time, and personal exposure times were estimated by using time activitypatterns and exposure scenarios. The major microenvironments of housewives were selected using the ‘Time-UseSurvey’ conducted by the National Statistical Office in Korea in 2009. A total of 4,514 (weekdays) and 3,063(weekends) housewives were recruited for the ‘Time-Use Survey.’ It seems that housewives are spending about80% of their time in the house, and about 5% of their time outdoors during weekdays and weekends. The indoor/outdoor ratio of the average concentration of NO2 was more than 1, which indicated that the source was indoors.Toluene was shown to have higher concentrations indoors than outdoors. Ethylbenzene and xylene displayedsimilar characteristics to toluene, and the concentration ratio for indoor/outdoor was shown to be 1.29 ± 0.76 and1.04 ± 0.45, respectively, higher concentrations indoors. Based on the results of the time activity patterns ofparticipants, 3 kinds of exposure scenarios were formulated. The spent time and air concentration in eachenvironment were assumed as normal and lognormal distribution, respectively. And then the Monte-Carlosimulation was conducted. According to the result of the simulation, the exposures to hazardous air pollutantsrevealed an increasing pattern as housewives visits other indoor environments such as supermarkets.

In this paper, cycle performance analysis of two-stage compression and two-stage expansion refrigeration system using Natural refrigerants is presented to offer the basic design data for the operating parameters of the system. Alternative natural refrigerant R290(Propane), R600(Butane), R717(Ammonia), R1270(Propylene) for freon refrigerant R22 were used working fluids in this study. The operating parameters considered in this study included evaporation temperature, condensation temperature, subcooling degree, superheating degree, and mass flow rate ratio of inter-cooler. The main results were summarized as follows : The COP of two-stage compression and two-stage expansion refrigeration system increases with the increasing subcooling degree and mass flow rate ration of inter-cooler, but decreases with the increasing evaporating temperature, condensing temperature and superheating degree. Therefore, subcooling degree, mass flow rate ratio of inter-cooler of two-stage compression and two-stage expansion refrigeration system using alternative nreon refrigerants have an effect on COP of this system.

본 시험은 온도 발육모델을 이용하여 꽃매미 알의 부화시기를 예측하고 약충과 성충 방제에 효과적인 친환경 자재선발 및 끈끈이트랩 색상별 유인효과를 찾기 위하여 수행하였다. 꽃매미 알은 15, 20, 25℃(14L:10D)에서 각각 55.9, 26.8, 21.6일 만에 부화하였고 부화율은 각각 61.9, 57.8, 30.4%로 온도가 높을수록 부화소요기간은 짧고 부화율은 낮았다. 알의 온도와 발육속도와의 관계식은 Y=0.0028X-0.0228 (R2=0.9561)이었으며, 발육영점온도는 8.14℃, 유효적산온도는 355.4일도였다. 위의 관계식에 의하여 전남지역 꽃매미 알의 부화시기는 5월 22일로 예측되었다. 꽃매미 약충방제에 효과적인 친환경자재는 제충국추출물, 고삼추출물, 데리스추출물이었고, 성충은 제충국추출물, 고삼추출물이었다. 황토색, 파랑색, 노랑색 끈끈이트랩 중에서 황토색끈끈이트랩의 유인량은 2주 동안에 약충 535마리, 성충 87.7마리였다. 황토색 끈끈이트랩은 꽃매미 약충과 성충의 유인포살효과가 우수하였다.

We developed an age-based spawner-recruit model incorporating environmental variables to forecast stock biomass and recruits of pelagic fish in this study. We applied the model to the Tsushima stock of jack mackerel, which is shared by Korea and Japan. The stock biomass of jack mackerel (Trachurus japonicus) around Korean waters ranged from 141 thousand metric tons (mt) and 728 thousand mt and recruits ranged from 27 thousand mt to 283 thousand mt. We hind-casted the stock biomass to evaluate the model performance and robustness for the period of 1987~2009. It was found that the model has been useful to forecast stock biomass and recruits for the period of the lifespan of fish species. The model is also capable of forecasting the long-term period, assuming a certain climatic regime.

In this study, we estimated nitrogen dioxide (NO₂) concentrations in microenvironments where residential indoor, residential outdoor, other indoors, and transportation using measured personal exposure and multiple linear regression analysis of time-weighted average model, and compared with measured NO₂ concentration in microenvironments. Measured residential indoor, outdoor and other indoor NO₂ concentration was 22.22±9.59 ppb, 23.64±9.62 ppb, and 22.07±13.90 ppb, respectively. NO₂ concentrations in residential indoor and outdoor, total outdoor, other indoor, and transportation by multiple regression analysis were significantly estimated as 20.48 ppb, 32.79 ppb, 24.35 ppb, and 28.82 ppb, respectively (p= 0.000). Measured and estimated NO₂ concentration were similar with each other, therefore NO₂ concentrations in each microenvironment were able to be estimated using time-weighted average model and personal exposure with multiple regression analysis.

Recently, the characteristic of plant production systems in Korea has been changed with the strong trends of integration and large scale, using environmental control techniques. To satisfy this change successfully, first of all, the environmental prediction inside the system must be preceded. While many environmental prediction models for plant production system were developed by many persons, each model cannot be applied to the every situation without the perfect understanding of source codes and the technical modification. The purpose of this study is building the environmental prediction model to predict and evaluate the environment inside the system numerically, and also developing the multipurpose program available for practical design. The model consisted of the basic system model, the cultivation related model and the environmental control related model. The contents of each model are as follows : the basic system model is dealing with thermal and light environments, soil environment and ventilation : the cultivation related model with soil and hydroponic cultures ; and the environmental control related model with thermal curtain and heat exchanging system. The environmental prediction model was developed using a common simulation program, PCSMP, so that it could be easily understood and modified by anyone. Finally, the model was executed and verified through comparison between simulated and measured results for soil culture, and both results showed good agreements.

Chloride penetration into concrete is the main cause of the corrosion of steel in concrete structures exposed to chloride-rich environments. As a preventive or remedial method, surface treatments on concrete have been increasingly applied to both new and existing concrete structures to combat this problem. So far, knowledge of how a surface treatment reduces chloride diffusion is limited and the relationship between chloride diffusion resistance and surface treatment parameters, such as thickness, porosity and diffusion coefficient, has not been quantitatively identified. In this paper, chloride ion penetration modeling is performed to predict the service life of the surface treated concrete.

A new prediction scheme has been proposed for the robust teleoperation in a non-visible environment. The positioning error caused by the time delay in the non-visible environment has been compensated for by the Smith predictor and the sensory data have been estimated by the Grey model. The Smith predictor is effective for the compensation of the positioning error caused by the time delay with a precise system model. Therefore the dynamic model of a mobile robot has been used in this research. To minimize the unstable and erroneous states caused by the time delay, the estimated sensor data have been sent to the operator. Through simulations, the possibility of compensating the errors caused by the time delay has been verified using the Smith predictor. Also the estimation reliability of the measurement data has been demonstrated. Robust teleoperations in a non-visible environment have been performed with a mobile robot to avoid the obstacles effective to go to the target position by the proposed prediction scheme which combines the Smith predictor and the Grey model. Even though the human operator is involved in the teleoperation loop, the compensation effects have been clearly demonstrated.

To project the effects of climate-induced change on aquatic environments, it is necessary to determine the thermal constraints affecting different fish species and to acquire time series of the current and projected water temperature (WT). Assuming that a nonlinear regression between the WT at individual stations and the ambient air temperature (AT) at nearby weather stations could represent the best relationship of air-water temperature, This study estimates future WT using a general circulation model (GCM). In addition, assuming that the grid-averaged observations of AT correspond to the AT output from GCM simulation, this study constructed a regression curve between the observations of the local WT and the concurrent GCM-simulated surface AT. Because of its low spatial resolution, downscaling is unavoidable. The projected WT under global warming scenario A2 (B2) shows an increase of about 1.6 (0.9 ) for the period 2080-2100. The maximum/minimum WT shows an amount of change similar to that of the mean values. This study will provide guidelines for decision-makers and engineers in climate-induced river environment and ecosystem management.

매년 수질안전관리와 관련한 사건사고는 끊임없이 발생하고 있으며, 과거의 여러 사례에서 보여지듯이 수질오염으로 인한 피해는 후대까지 지속되는 인류의 끔찍한 재앙을 낳았다. 물은 인간을 비롯한 모든 생태계에 있어 가장 밀접하고도 필수적인 요소이기 때문에 철저한 유지 및 관리가 필요하다. 하지만 인간의 물 공급원인 호수나 하천은 지형적 특성상 오염 후 회복이 어려우며, 경제적인 부분은 물론, 획기적인 수질정화기술이 제시됨에도 불구하고 인구증가와 활발한 인간활동으로 그 수준을 따라가지 못하는 실정이다. 이를 위해 본 연구에서는 사용자의 편의를 위해 Matlab GUI로 제작한 수질의 오염정도를 간단히 예측해 볼 수 있는 수질 예측 모델에 대해 소개하고자 한다. 본 연구에서 소개하는 수질 예측 모델은 well-mixed, steady state라는 가정 하에 자연수역의 형태와 외부 오염 유입 등을 고려하여 알고자하는 지점의 수질 위험정도 판단이 용이하다. 또한 편리한 조작과 간단한 데이터 입력만으로도 수질오염정도의 판단 기준이 되는 여러 지표로 분석 가능하기 때문에 환경공학도들의 자가학습 툴(Self-Learning Tool)로도 효과적일 것으로 기대된다.

The plant habitat is moved by change of growth environment due to global warming. And it have to need seed germination and successful settlement of seedling in new habitat. This study aims to supply basic data for predicting change of habitat of Dendropanax morbifera Lev., warm temperate tree in Korea, by global warming. Characteristics of seed germination of D. morbifera was studied in different temperature and light conditions. Firstly, fruit and non-fleshed seed were saw without cold treatment. Second, each fruit and non-fleshed seed were treated in wet cold and dry cold conditions at 4°C for 3 months, and it were saw in 10, 15, 20, 25, 30°C conditions. After cold treatment at 4°C, non-fleshed seed shows high germination ratio of 87%, 53%, 77%, 63%, 23% in 10°C, 15°C, 20°C, 25°C, and 30°C, respectively. Also, in filed test, non-fleshed seed was high in 69.2% and in non-light condition. However, it did not shown germinated seed in light condition. In conclusion, germination of D. morbifera mainly controlled by non-light condition in temperature after cold treatment for about 3 months on 4°C.

This study forecasts changes in thermal environment and microclimate change per new building construction and assignment of green space in urban area using Computational Fluid Dynamics(CFD) simulation. The analysis studies temperature, humidity and wind speed changes in 4 different given conditions that each reflects; 1) new building construction; 2) no new building construction; 3) green spaces; and 4) no green spaces. Daily average wind speed change is studied to be; Case 2(2.3 m/s) ＞ Case 3. The result of daily average temperate change are; Case 3(26.5℃) ＞ Case 4(24. 6℃) ＞ Case 2(23.9℃). This result depicts average of 2.5℃ temperature rise post new building construction, and decrease of approximately 1.8℃ when green space is provided. Daily average absolute humidity change is analysed to be; Case 3(15.8 g/kg') ＞ Case 4(14.1 g/kg') ＞ Case 2(13.5 g/kg'). This also reveals that when no green spaces is provided, 2.3 g/kg' of humidity change occurs, and when green space is provided, 0.6 g/kg change occurnd 4(1.8 m/s), which leads to a conclusion that daily average wind velocity is reduced by 0.5 m/s per new building construction in a building complex.