This study examined the quality characteristics of cookies comprised of various amounts of barley-sprout powder by analyzing the physico-chemical characteristics of the cookies and investigating a sensory evaluation. For the study, the cookies were cooked with the following levels of barley-sprout powder: 0%, 3%, 6%, 9%, and 12%. The results show that the moisture content of the cookies was increased in accordance with the level of barley-sprout powder and this result is the same as the spreadability factor of the cookies (p<0.001). Also, the pH and brix values of the samples decreased in accordance with the level of barley-sprout powder (p<0.001). Regarding hunter's colors, the values of L (lightness), a (redness), and b (yellowness) are significantly decreased, increasing the quantity of barley-sprout powder (p<0.001). For the textural characteristics, the results show that the hardness of the cookies decreased in accordance with the addition of the barleysprout powder; furthermore, the results indicate a tendency whereby the DPPH-radical-scavenging activity and the total polyphenol content of the cookies were increased, thereby increasing the quantity of the barley-sprout powder (p<0.001). For the sensory evaluation, the cookies that were made with 6 % barley-sprout powder received the highest scores in terms of appearance, taste, and overall preference (p<0.05, p<0.001). This study suggests that barley-sprout powder is an excellent ingredient for improving the acceptability and functionality of cookies, and that, in relation to the flour quantity the ideal proportion of barley-sprout powder is 6%.

레몬그라스 분말을 첨가한 머핀의 품질특성 및 항산화를 측정하기 위하여 레몬그라스 분말 0%, 1%, 3%, 6%, 9%를 첨 가하여 머핀을 제조하였다. 머핀의 높이, 부피 및 비체적은 분말의 첨가량이 증가할수록 감소하였다. 레몬그라스 분말 첨가군의 수분 함량과 점도는 대조군과의 유의적 차이가 나 타내지 않았으며, 색도 측정 결과, 명도와 황색도는 레몬그라 스의 농도가 증가할수록 유의적으로 감소하였으나, 적색도는 증가하였다. Texture를 측정한 결과, 레몬그라스 분말의 씹힘 성은 첨가량이 증가할수록 감소하였다. 관능검사는 색, 향, 맛, 조직감, 기호도를 측정했으며, 그 결과 3% 첨가군에서 가 장 높은 관능검사 결과를 보여주었다. 레몬그라스 머핀의 DPPH 라디칼 소거능 측정 결과, 레몬그라스의 농도가 증가함에 따라 유의적으로 항산화 활성이 증가하였으므로, 레몬그라스의 첨 가가 머핀의 기능성에 좋은 영향을 나타낼 것으로 사료된다.

This study was conducted to investigate the effects of chlorella powder on quality characteristics of maejakgwa (a Korean traditional cookies). Maejakgwa was prepared with different amounts of chlorella powder (in ratios 0, 1, 2, 3, and 4% of flour quantity). The moisture, crude ash, crude protein, and crude lipid contents of used chlorella powder were 2.38, 7.25, 65.95, and 0.95% respectively. The pH of maejakgwa dough decreased significantly as the level of chlorella powder increased; however, density of the batter, spread factor values, and moisture contents of the groups increased significantly with higher level of the chlorella powder. In addition, Hunter’s color L, a, and b values decreased significantly with increasing amounts of chlorella powder. In the texture meter test, hardness increased according to increasing concentration of chlorella powder. Finally, maejakgwas containing 1~2% chlorella powder had the highest sensory evaluation. From these results, we suggest that chlorella powder is a good ingredient for increasing consumer acceptability as well as functionality of maejakgwas.

This study was performed to investigate the effect of Gastrodia elata powder on the quality characteristics of Jochung with barley malt. Grain syrups with 0, 2.5, 5, 7.5, and 10% Gastrodia elata powder were produced. The pH value decreased with higher volume of Gastrodia elata powder and showed a significant difference between the samples (p<0.05). Total polyphenol content was 77.45~129.25 mg/100 g, and DPPH radical scavenging ability was 36.70~57.09 μmol. Sensory score of Jochung containing 2.5% Gastrodia elata powder was similar to that of control. Jochung containing less than 7.5% Gastrodia elata powder gave the highest scores in terms of quality characteristics and sensory evaluation. The data from different procedures were compared and analyzed by multivariate techniques (correlation matrix, principal component analysis). Correlations between antioxidant activity and the analyzed parameters were found to be statistically significant (p<0.05).

Bamboo sprout powder was added to rice cake in an effort to improve the quality and functional properties of dough. The contents of crude protein and carbohydrates increased as the amount of bamboo sprout powder increased, whereas moisture contents decreased. According to increasing contents of bamboo sprout powder, total amino acid contents significantly increased. Hunter’s L value decreased as contents of bamboo sprout powder increased, whereas sucrose contents increased. Addition of bamboo sprout powder to rice cake increased dietary fiber contents. Sensory scores of rice cake containing 90 g of bamboo sprout powder were the highest of all rice cakes tested. According to the results, adding bamboo sprout powder could improve the quality and sensory characteristics of rice cake.

This study was conducted to investigate the effects of addition of Artemisia annua L. powder in jeonbyeong. Contents of crude ash increased as the amount of Artemisia annua L. powder increased, whereas crude fat contents decreased. According to increasing contents of Artemisia annua L. powder, total amino acid contents significantly increased. Hunter’s L value increased as contents of Artemisia annua L. powder increased, whereas total free sugar contents decreased. Addition of Artemisia annua L. powder to jeonbyeong increased dietary fiber contents. The sensory score of jeonbyeong containing 100 g of Artemisia annua L. powder was the highest of all jeonbyeong tested. According to the results, addition of Artemisia annua L. powder could improve the quality and sensory characteristics of jeonbyeong.

Fe-30 wt% TiC composite powders are fabricated by in situ reaction synthesis after planetary ball millingof (Fe, TiH2, Carbon) powder mixture. Two sintering methods of a pressureless sintering and a spark-plasma sinteringare tested to densify the Fe-30 wt% TiC composite powder compacts. Pressureless sintering is performed at 1100, 1200and 1300oC for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried outunder the following condition: sintering temperature of 1050oC, soaking time of 10 min, sintering pressure of 50 MPa,heating rate of 50oC/min, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) areobtained from the data stored automatically during sintering process. The densification behaviors are investigated fromthe observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder com-pacts are not densified even after sintering at 1300oC for 3 h, which shows a relative denstiy of 66.9%. Spark-plasmasintering at 1050oC for 10 min exhibits nearly full densification of 99.6% relative density under the sintering pressure of50 MPa.

MgB2 bulk superconductors are synthesized by the solid state reaction of (MgB4+xMg) precursors withexcessive Mg compositions (x=1.0, 1.4, 2.0 and 2.4). The MgB4 precursors are synthesized using (Mg+B) powders. Thesecondary phases (MgB4 and MgO) present in the synthesized MgB4 are removed by HNO3 leaching. It is found thatthe formation reaction of MgB2 is accelerated when Mg excessive compositions are used. The magnetization curves ofMg1+xB2 samples show that the transition from the normal state to the superconducting state of the Mg excessive sam-ples with x=0.5 and x=0.7 are sharper than that of MgB2. The highest Jc-B curve at 5 K and 20 K is achieved forx=0.5. Further addition of Mg decreases the Jc owing to the formation of more pores in the MgB2 matrix and smallervolume fraction of MgB2.

표고버섯가루(Lentinus edodes powder, LE)첨가량 (0~1%)과 지방대체재를 첨가한 저지방 소시지의 이화학적 및 조직학적인 성상과 관능특성에 대하여 조사하였고, 기존의 유화형 소시지와 유사한 성상을 갖는 저지방 처리구를 선별하고자 본 연구를 실시하였다. LE 첨가량이 증가함에 따라 명도는 낮아졌으 나, 황색도는 증가하였다. 또한 유리수분양이 많아졌으며, 특히 LE를 0.5% 이상 첨가할 때, 지방대체 재가 함유된 저지방 소시지 LE 무첨가 조건과 유의적인 차이를 보였다. LE 첨가량이 증가할수록 유의 적으로 조직감이 낮아졌으며, 특히 0.5% 이상 첨가할 때, 유화형 및 저지방 소시지 대조구와 지방대체 재를 첨가한 저지방 소시지 LE 무첨가 조건과 유의적인 차이를 보였다 (P<0.05). 이러한 보수성과 조 직감의 감소는 관능성상에서도 유사하게 나타났다. 결론적으로 제품의 결함이 없는 기능성 저지방 소시 지를 제조하기 위한 LE 첨가량은 0.25%이하로 제안하였다.

This paper investigates the dependency of the critical content for electrical conductivity of carbon powder-filled polymer matrix composites with different matrixes as a function of the carbon powder content (volume fraction) to find the break point of the relationships between the carbon powder content and the electrical conductivity. The electrical conductivity jumps by as much as ten orders of magnitude at the break point. The critical carbon powder content corresponding to the break point in electrical conductivity varies according to the matrix species and tends to increase with an increase in the surface tension of the matrix. In order to explain the dependency of the critical carbon content on the matrix species, a simple equation (Vc* = [1 + 3(γc1/2 − γm1/2)2/(ΔqcR]−1) was derived under some assumptions, the most important of which was that when the interfacial excess energy introduced by particles of carbon powder into the matrix reaches a universal value (Δqc), the particles of carbon powder begin to coagulate so as to avoid any further increase in the energy and to form networks that facilitate electrical conduction. The equation well explains the dependency through surface tension, surface tensions between the particles of carbon powder.

This experiment was carried out to find the quality characteristics of yanggaeng added antioxidant rich collagen powder in the color, sugar contents, texture, radical scavenging activity and electronic nose detected flavor. L value and a value kept decreased as the more collagen powder was added in the yanggaeng while b value was increased significantly at the same time. Sugar contents was increased significantly from 43 °Brix in the control to 48% in the 10% treatment (p<0.05). Hardness in the 10% treatment of collagen powder increased biggest among the treatments but springiness decreased when hardness increased. And adhesiveness, cohesiveness, gumminess and chewiness were also increased with more the collagen powder in the treatments, therefore 10% treatment showed biggest result significantly. Radical scavenging activity kept increased with higher addition of collagen powder and it resulted 60% of radical scavenging activity in the 10% treatment. In the flavor test under electronic nose experiment, 10% of collagen powder treatment was believed it flavored most for it was found in the furthest from the AIR location. Control was found also in the nearest from the AIR, which meant it has least flavor than any other treatment. Also 2.5% and 5% of collagen powder added treatments showed little differences of flavor from control, which meant 5% of treatment was believed idea condition in the treatments. With the above experimental results, 5% of collagen powder treatment in the yanggaeng manufacturing was chosed as the best mixture ratio in the test.

This study was performed to produce WBM (wheat and barley mixture) bread containing molokhia powder with quality characteristics and antioxidant activities. Analysis of the chromaticity of WBM prepared with molokhia powder showed that; the lightness and redness were decreased, but yellowness was increased. In mechanical properties, hardness, gumminess, and chewiness were significantly increased as the amount of molokhia powder was increased. However, cohesiveness was significantly decreased. In sensory evaluation, WBM bread containing 1.5% of molokhia powder (MB1.5) showed an overall high preference level. The total polyphenol content of molokhia powder EtOH extract and MB1.5 were 29.19 and 58.18 mg TAE/g, respectively. The total flavonoid contents of molokhia powder EtOH extract and MB1.5 were 20.62 mg and 33.25 mg RE/g, respectively. The radical scavenging ability (IC50) of DPPH (IC50) for molokhia powder EtOH extract and MB1.5 was 31.04 and 58.18 μg/mL, respectively while that of ABTS was 33.25 and 54.15 μg/mL, respectively. The α -glucosidase inhibitory effects of molokhia powder EtOH extract and MB1.5 were 494.88 and 814.88 μg/mL, respectively. MB bread containing 1.5% molokhia powder showed antioxidative effects and α-glucosidase inhibitory activity, meaning that not only molokhia but also MB1.5 bread has the potential to prevent chronic degenerative diseases such as diabetes.

This study was performed to investigate the physiological functionality of jerusalem artichokes and to define its antioxidant potential. The study also evaluated mook prepared with jerusalem artichokes powder as a new functional food for ameliorating Diabetes Mellitus. Regarding the chromaticity of mook prepared with jerusalem artichoke, lightness decreased as the amount of jerusalem artichoke increased (p<0.05), while the redness and yellowness values increased significantly (p<0.05). Regarding the mechanical properties, hardness, springiness, chewiness, gumminess, and cohesiveness decreased significantly as the amount of jerusalem artichoke increased (p<0.05). The total polyphenol and flavonoid contents of JA30 were 7.36 mg TAE/g and 2.15 mg RE/g, respectively, which were higher than those of the control group(3.50 mg TAE/g and 0.76 mg RE/g, respectively). The DPPH and ABTS scavenging abilities (IC50) for JA30 were 4.40 and 5.70 mg/mL, respectively, indicating a higher radical scavenging ability than the control group (7.59 and 7.24 mg/mL, respectively). The α-glucosidase inhibitory effect (IC50) of JA30 and the control group was 18.91 and 24.01 mg/mL, respectively. Based on the above-described results, mook containing jerusalem artichoke powder is expected to ameliorate diabetes with antioxidant activity, α-glucosidase inhibitory effect, and sensory factor. Also, it is believed that this functional material has the potential to improve health

수확과정에서 버려지고 있는 고구마 잎을 이용한 기능성 식품소재로서 활용가능성을 검토하고자, 밀가루 중량 대비 고구마 잎 분말을 2, 3, 5, 7%의 비율로 첨가하여 식빵을 제조 하고, 반죽 및 제빵 특성, 생리활성 및 기능성분 등을 조사하 였다. 반죽의 수분흡수량은 7% 첨가 시 가장 높았고, 반죽시 간은 유의적인 차이를 보이지 않았으며, 반죽의 저항도는 2~3% 첨가할 때가 가장 안정적이었다. 식빵의 수분 함량은 첨가량이 증가하여도 큰 차이를 보이지 않았고, 식빵의 내부색은 첨가량이 증가할수록 L값과 a값은 감소하였으나, b값은 증가하였다. 식빵의 부피와 비용적 및 굽기 손실률은 첨가량 이 증가할수록 감소하였으나, 항산화 활성과 총 폴리페놀, 루 테인 및 베타카로틴 함량은 증가하였다. 관능평가의 결과, 고 구마 잎 분말의 2~3% 첨가 시 맛과 색깔, 조직감, 입안에서의 씹힘성과 종합적인 기호도에서 가장 우수한 값을 얻었다. 이 상의 결과에서 고구마 잎 분말의 2~3% 첨가 시, 제빵 적성과 기능성, 상품성이 우수한 식빵을 제조할 수 있었다.

To develop and industrialize functional foods containing peanut sprout extract (PSE) and powder (PSP), the present study investigated the quality characteristics and antioxidant effects of breads prepared with 0, 0.5, 1, 2, 2.5, 5, 7.5, and 10% PSE and PSP. The expansion ratio of the dough, the quality characteristics such as volume, weight, specific volume, baking loss, color, texture, and sensory preference were evaluated. There were significant differences in the bread volume and specific volume among the control, PSE and PSP groups (p<0.001). Additionally, the weight and baking loss were decreased with an increasing amount of PSP (p<0.001). As the amount of PSE and PSP were increased, the L value of the crumb decreased, whereas the a and b values of the crumb significantly increased (p<0.001), suggesting that the crumb color of the bread may be significancy (p<0.001). As the amount of PSE and PSP increased, the hardness of bread significantly and rapidly increased from 5%. Meanwhile, there was no significance in springiness among the control, PSE and PSP groups. The total resveratrol content and DPPH free radical-scavenging activity of the bread significantly increased depending on the amounts of PSE and PSP (p<0.001). In the overall acceptance test, no significant differences were observed in the color, flavour, or texture, however, the taste and overall acceptance were significantly decreased between the control and the PSE group. All the sensory characteristics in the PSP group were significantly reduced compared with the control. Considering the above results, it can be expected that the suitable amount of PSE and PSP substituted for wheat flour will be from 1.0 to 2.5%. Furthermore, follow-up studies are being carried out continuously.

The goal of this study is to show that the investigate is preference of beetroot cookie is preferred by consumers and can help to replace calcium, which is depleted because of the stress. As the amount of beetroot powder is increased, pH value, spread factors, loss and leaving rates, and texture properties of cookies were decreased. As a result of the measuring of colorimetric characteristics, the values of “L”, “a”, “b” were all decreased as the amount of beetroot powder was increased. The cookies containing 30% of beetroot powder was estimated as the most suitable to eat because of the flavor, color, and taste of the beetroot. But cookies having 20% of beetroot powder were estimated as the best to eat because of the texture, sticking power, hardness, and general preference. According to the results, the cookies containing 20% of beetroot powder were selected as the most suitable cookies to eat.

The synthesis of NiTi alloy powders by hydrogen reduction and dehydrogenation process of NiO and TiH2 powder mixtures is investigated. Mixtures of NiO and TiH2 powders are prepared by simple mixing for 1 h or ball milling for 24 h. Simple-mixed mixture shows that fine NiO particles are homogeneously coated on the surface of TiH2 powders, whereas ball milled one exhibits the morphology with mixing of fine NiO and TiH2 particles. Thermogravimetric analysis in hydrogen atmosphere reveals that the NiO and TiH2 phase are changed to metallic Ni and Ti in the temperature range of 260 to 290oC and 553 to 639oC, respectively. In the simple-mixed powders by heat-up to 700oC, agglomerates with solid particles and solidified liquid phase are observed, and the size of agglomerates is increased at 1000oC. From the XRD analysis, the presence of liquid phase is explained by the formation and melting of NiTi2 intermetallic compound due to an exothermic reaction between Ni and Ti. The simple-mixed powders, heated to 1000oC, lead to the formation of NiTi phase but additional Ni-, Ti-rich and Ti-oxide phases. In contrast, the microstructure of ball-milled powders is characterized by the neck-grown particles, forming Ni3Ti, Ti-oxide and unreacted Ni phase.

Anodic aluminum oxide (AAO) has been widely used for the development and fabrication of nano-powder with various morphologies such as particle, wire, rod, and tube. So far, many researchers have reported about shape control and fabrication of AAO films. However, they have reported on the shape control with different diameter and length of anodic aluminum oxide mainly. We present a combined mild-hard (or hard-mild) anodization to prepare shape-controlled AAO films. Two main parameters which are combination mild-hard (or hard-mild) anodization and run-time of voltage control are applied in this work. The voltages of mild and hard anodization are respectively 40 and 80 V. Anodization was conducted on the aluminum sheet in 0.3 mole oxalic acid at 4oC. AAO films with morphologies of varying interpore distance, branch-shaped pore, diameter-modulated pore and long funnel-shaped pore were fabricated. Those shapes will be able to apply to fabricate novel nano-materials with potential application which is especially a support to prevent volume expansion of inserted active materials, such as metal silicon or tin powder, in lithium ion battery. The silicon powder electrode using an AAO as a support shows outstanding cycle performance as 1003 mAh/g up to 200 cycles.

Electronic products are a major part of evolving industry and human life style; however most of them are known to emit electromagnetic waves that have severe health hazards. Therefore, different materials and fabrication techniques are understudy to control or limit transfer of such waves to human body. In this study, nanocomposite powder is dispersed into epoxy resin and shielding effects such as absorption, reflection, penetration and multiple reflections are investigated. In addition, nano size powder (Ni, Fe2O3, Fe-85Ni, C-Ni) is fabricated by pulsed wire evaporation method and dispersed manually into epoxy. Characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy are used to investigate the phase analysis, size and shape as well as dispersion trend of a nano powder on epoxy matrix. Shielding effect is measured by standard test method to investigate the electromagnetic shielding effectiveness of planar materials, ASTM D4935. At lower frequency, sample consisting nano-powder of Fe-85%Wt Ni shows better electromagnetic shielding effect compared to only epoxy, only Ni, Fe2O3 and C-Ni samples.