PURPOSES : For high driving performance and service life of cement concrete pavement, construction quality must be secured. The construction quality is to be measured after pavement construction, but in this case, it is difficult to improve construction quality. Therefore, it is necessary to develop a method for measuring and correcting the profile of the pavement and subbase so that the construction quality can be monitored immediately after construction. METHODS : The device that can measure the construction quality of cement concrete pavement has been developed. Through the experiment simulating the field situation, the profile of the pavement and subbase was measured and calibration method was developed. RESULTS : In the measured profile, an outlier by the sensor and noise by the sensor and vibration were measured, and a step-like profile was measured differently from the acture one. To remove outliers, the boxplot outlier removal method was applied by overlapping each data group. The noise were removed by a low pass filtering. And, it was calibrated to a profile similar to the acture one through the sampling interval adjustment and the weighted moving average method. CONCLUSIONS : The method that can measure and calibrate the profile that is almost identical to the actual one has been developed. Accordingly, it is expected that the performance of the pavement can be improved by accurately monitoring the construction quality immediately after construction.

PURPOSES : In general, a high-performance concrete construction method is a method of loading mixed cement and other materials on a mobile mixer equipped with a concrete plant. However, the construction cost is high because the unit cost of the mixed cement is very high and the equipment usage fee of the mobile mixer is also high. To compensate for these drawbacks, a cellular spray concrete method was developed. This is a highly functional customized concrete construction method in which admixtures are added to high-flow concrete with cellular (air bubbles) added at the site and constructed through spraying. METHODS : Field workability evaluation using cellular concrete was carried out using a spray method in 2017 and an anti-foaming agent in 2018. The test construction section was set as a new road-pavement construction site. After construction, strength, durability characteristics, and void analysis were performed to compare the construction methods. The results of laboratory tests under optimal conditions were also compared to the on-field results. By comparing the indoor mixing and the on-field results, we analyzed whether there were any problems concerning the performance expression. The economic feasibility at the initial construction stage was analyzed by comparing the existing and the cellular concrete construction methods in terms of material cost and equipment usage fee. RESULTS : In the case of cellular spray concrete, construction through spraying is cumbersome, and the need to additionally use large equipment such as a pump car and compressor constitutes a disadvantage. However, the most relevant feature is that it can be constructed not only on the floor, but also on a slope. In the case of cellular concrete with an antifoaming agent, it was possible to quickly produce high-performance concrete using on-site remixing equipment. By supplying materials to the pouring surface using a conveyor, smooth construction and construction in narrow spaces were also possible. CONCLUSIONS : The cellular concrete method allows the immediate on-site production of high-performance concrete, and it is possible to selectively apply spray construction, antifoaming agent construction, etc.

PURPOSES : For large-scale construction, such as a concrete pavement, design and construction are not entirely consistent. If the inconsistency between design and construction is very large, construction quality is significantly degraded, affecting performance life span and driving comfort. The quality of pavement construction is managed according to standards. However, it is difficult to improve construction quality as the standard measures construction quality after construction is completed. Therefore, this study developed a system to measure the construction quality of concrete pavement in real-time and presented the corresponding standards. METHODS : A basic module for simultaneously measuring the width, thickness, and roughness of the concrete pavement was designed. Based on the measurement results of the distance measurement sensor, a calibration method is presented that can remove noise. The system process was developed to measure construction quality based on location and distance data, measured in real-time using GPSs and sensors. The field application experiment was conducted and the results were analyzed. RESULTS : The measurement module is properly designed to be used in concrete pavement construction sites. Noise was removed from the distance measurement sensor results according to the presented calibration method, leaving only the wave of pavement surface irregularities. As a result of applying the system process in the field application, a reasonable level of PRI was observed. CONCLUSIONS : In the past, the width, thickness, and roughness were measured after construction was completed and, if the standard was not met, construction quality control was performed via reconstruction or repair. Through this study, it is expected that the width, thickness, and roughness of the concrete pavement can be measured in real-time and, if the standard is not met, construction quality can be immediately controlled during construction to maintain high quality.