The objective of this study is to evaluate the antioxidant components, elastase inhibition activities, and melanin synthesis rates of Korean traditional Actinidia (Actinidia arguta) fruits and leaves depending on the ethanol extraction concentrations. The total polyphenol content was the highest in the 50% ethanol extract of both fruits and leaves, with values of 634.1 mg GAE/100 g and 3,985.2 mg GAE/100 g, respectively. The total flavonoid content was the highest in the fruit 90% extract and leaf 50% extract at 191.9 mg/100 g and 2655.6 mg/100 g, respectively. The vitamin C content was the highest in the 50% extract of leaves at 2990.3 mg/100 g. Elastase inhibition was the highest at 56.9% in the leaf 50% extract at a concentration of 1,000 μg/mL. Melanin synthesis inhibition showed the highest melanin synthesis inhibitory effect among the extracts, as the leaf 50% extract showed an inhibitory rate of 65% or more. Therefore, the antioxidant components, elastase inhibition activities, and melanin synthesis inhibitory rate were better in leaves than in fruits. The leaf 50% extract was particularly the best among the extracts. Korean traditional Actinidia leaves can be considered as potential sources for new functional materials.

Li1.3Al0.3Ti1.7(PO4)3(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10-3–10-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.

이 논문에서는 보행교의 진동 사용성 평가에 있어서 보행자의 이동 질량 관성 효과의 고려 여부, 보행 패턴 등을 고려한 보행 시나 리오 등에 따른 해석 결과를 제시하고, 그에 따라 보행교 설계 단계에서 동적 유한요소 해석을 통한 진동 사용성 평가에 있어 적절한 해석 방법과 유의점을 제안한다. 지간 40m의 강합성 박스 단면을 갖는 단경간 단순교 형식의 보행교에 대하여 보행자 밀도, 보행 속 도, 임의 보행, 동기화 보행 등을 고려한 보행 시나리오에 대한 가속도 응답을 분석한다. 해석 결과 고정 질량 해석 방법은 임의 보행 시 나리오 해석에서 이동 질량 해석과 큰 차이를 보이지 않으며 진동 사용성 평가시에는 더 넓은 진동수 대역을 가진할 수 있는 임의 보행 시나리오를 고려하는 것이 바람직할 수 있음을 보였다.

The purpose of this study was to verify the sensitive areas when the AI determines osteoporosis for the entire area of the panoramic radiograph. Panoramic radiographs of a total of 1,156 female patients(average age of 49.0±24.0 years) were used for this study. The panoramic radiographs were diagnosed as osteoporosis and the normal by Oral and Maxillofacial Radiology specialists. The VGG16 deep learning convolutional neural network(CNN) model was used to determine osteoporosis and the normal from testing 72 osteoporosis(average age of 73.7±8.0 years) and 93 normal(average age of 26.4±5.1 years). VGG16 conducted a gradient-weighted class activation mapping(Grad-CAM) visualization to indicate sensitive areas when determining osteoporosis. The accuracy of CNN in determining osteoporosis was 100%. Heatmap image from 72 panoamic radiographs of osteoporosis revealed that CNN was sensitive to the cervical vertebral in 70.8%(51/72), the cortical bone of the lower mandible in 72.2%(52/72), the cranial base area in 30.6%(22/72), the cancellous bone of the mandible in 33.3%(24/72), the cancellous bone of the maxilla in 20.8%(15/72), the zygoma in 8.3%(6/72), and the dental area in 5.6%(4/72). Consideration: it was found that the cervical vertebral area and the cortical bone of the lower mandible were sensitive areas when CNN determines osteoporosis in the entire area of panoramic radiographs.

Targeting Microcystin (MC), which is most abundantly detected in the North-Han River water area, we analyzed the relationship between the MC biosynthesis gene (mcyA gene), cyanobacteria cell density, and MC concentration, derived an RNA-MC conversion formula, and derived the cyanobacteria. The concentration of MC present in cells was predicted. In the North-Han River waters, the mcyA gene was found mainly at downstream sites of the North-Han River after Muk-Hyeon Stream junction, and higher copy numbers were found on average than other sites. In the Uiam Lake waters upstream of the North-Han River, the mcyA gene copy number increased at the Kong-Ji Stream point, and after September, the mcyA gene copy number decreased throughout the North-Han River waters. The expression of the mcyA gene was concentrated in the short period of summer due to the spatio-temporal difference between upstream and downstream water bodies. The mcyA gene expression level was not only highly correlated with MC concentration, but also correlated with the cell density of Microcystis aeruginosa and Dolichospermum circinale, which are known to biosynthesize MC. Six conversion formulas derived based on the RNA-MC relationship showed statistical significance (p<0.05) and exhibited high correlation coefficients (r) of 0.9 or higher. The expression level of MC biosynthesis gene present in eRNA determines the synthesis of cyanotoxin substances in water, quickly quantifies gene activity, and can be fully utilized for early warning of MC development.

국내 건설현장에서 장스팬 구조물이 증가함에 따라 콘크리트와 강재를 조합한 충전형합성보의 적용이 증가하고 있 다. 충전형합성보는 경제적이며 시공성이 향상되고 콘크리트 축열효과에 따라 내화성도 우수하다. 충전형합성보 내부에 휨성능 을 향상시키기 위해 Re-bar로 보강하여 사용한다. 이는 콘크리트 균열에 의해 부식 되어 내력저하를 유발한다. CFRP Re-bar는 경량이며 내부식성이 우수하다. 그러나 임계온도가 250℃로 낮기 때문에 화재에 취약으로 적절한 내화피복재를 적용해야된다. 따라서 열전달해석을 통해 내부 CFRP Re-bar가 보강된 충전형합성보의 온도분포를 확인하였다. 온도 상승에 따른 휨내력을 산 정하여 피복두께를 제안하고자 한다. 해석결과 단면크기에 상관없이 콘크리트 피복두께 40mm와 뿜칠내화피복재 20mm를 적용 하면 표준화재에서 3시간 내화성능을 확보하는 것으로 평가되었다.

Recently, research on MAX phase materials has been actively conducted. M of MAX phase is made of early transition metal element, A is A-group (IIIA or IVA) element, and X is Carbon or Nitrogen. It has the chemical formula of MnAXn-1, and is called the 211, 312, and 413 groups according to the indices(n=1,2,3). MXene material is characterized by having a layered structure of 2D structure like graphene by etching the element corresponding to A-gruop in the MAX phase. So far, MXene materials have been reported to be applied in various fields. In particular, research is being actively conducted as anode material for Li secondary batteries, electromagnetic wave shielding material, and hydrogen storage alloy material. In the pulse energization active sintering method, the surface of the powder particles is cleaned and activated more easily than the conventional electrical sintering process and material transfers at both the macro and micro level, so that a high-quality sintered body can be obtained at low temperature and fast time. In this study, the MAX phase was synthesized in a short time by using a pulse current active sintering apparatus, and the MXene material was prepared from the synthesized MAX phase and the structure was analyzed.

Tin-antimony sulfide nanocomposites were prepared via hydrothermal synthesis and a N2 reduction process for use as a negative electrode in a sodium ion battery. The electrochemical energy storage performance of the battery was analyzed according to the tin-antimony composition. The optimized sulfides exhibited superior charge/discharge capacity (770 mAh g-1 at a current density of 100 mA g-1) and stable lifespan characteristics (71.2 % after 200 cycles at a current density of 500 mA g-1). It exhibited a reversible characteristic, continuously participating in the charge-discharge process. The improved electrochemical energy storage performance and cycle stability was attributed to the small particle size, by controlling the composition of the tin-antimony sulfide. By optimizing the tin-antimony ratio during the synthesis process, it did not deviate from the solubility limit. Graphene oxide also acts to suppress volume expansion during reversible electrochemical reaction. Based on these results, tin-antimony sulfide is considered a promising anode material for a sodium ion battery used as a medium-to-large energy storage source.

PSC거더 합성교량에 있어 노후(손상)된 바닥판을 교체할 경우에는 기존에 설치된 철근 전단연결재의 손상과 함께 파 쇄에 따른 소음 및 비산먼지 등이 많이 발생한다. 이러한 환경적 문제와 함께 교체공사 기간이 길어져 경제적 비용 또한 크게 증가한다. 본 연구에서는 이러한 문제를 해결하기 위해 PSC거더에 매립되지만 쉽게 분리할 수 있는 분리식 전단연결재를 제안 하였다. 제안한 분리식 전단연결재의 전단강도성능과 파괴거동을 확인하기 위해 유한요소해석을 통한 변수연구와 함께 수평전 단실험을 수행하였다. 해석연구를 통해 T-sleeve 하부에 Y형상의 테이퍼진 면을 갖는 경우에 볼트체결력에 따른 쐐기효과로 인 해 T-sleeve와 볼트 사이의 제작 공차가 있더라도 초기 슬립이 발생하지 않고 충분한 초기강성을 확보하는 것을 확인하였다. 또 한, 전단연결재의 배치 방향에 따른 영향은 전단성능에 영향을 주지 않는 것을 확인하였다. DY전단연결재는 기존 방식인 철근 전단연결재 모델과 비교실험을 통해 전단강도성능은 동등 이상을 확보하고 있으며, 슬립변위량 또한 연성설계기준인 6mm 이상 을 만족하는 것을 확인하였다. 본 연구를 통해 제안된 분리식 전단연결재는 추가적으로 합성거더 실험 등의 검증을 거친다면 노후 바닥판의 철거 및 교체에 유용한 대안이 될 수 있을 것으로 판단된다.

교량 인프라는 국민의 경제와 사회적 활동에 반드시 필요한 물리적 기반시설이고, 국민의 안전과 편의성에 직결되는 시설이므로 국민의 입장에서 편익을 고려해야 한다. 교량의 구성요소 중 바닥판은 교량 전체의 생애주기 동안 필연적으로 교체 시기가 도래하고 파손 등으로 인한 부분 교체도 빈번하게 이루어지고 있다. 바닥판 교체공사 시 거더와 바닥판을 합성하는 기 존 용접 전단연결재의 문제점을 해결하기 위한 볼트 접합 전단연결재(DY볼트)는 바닥판 철거 공정에서 파쇄를 최소화하고 교 체공사를 위한 전단연결재 재시공이 용이하여 공사 기간을 기존 대비 단축할 수 있는 것으로 분석되었다. 공사기간 중 도로차 단으로 인해 발생하는 도로이용자비용을 산출하여 기존 공법과 비교하는 방법으로 볼트 접합 전단연결재를 적용한 강합성 교량 의 경제성을 도로이용자(국민) 입장에서 분석하였다.

We report the synthesis and gas sensing properties of bare and ZnO decorated TeO2 nanowires (NWs). A catalyst assisted-vapor-liquid-solid (VLS) growth method was used to synthesize TeO2 NWs and ZnO decoration was performed using an Au-catalyst assisted-VLS growth method followed by a subsequent heat treatment. Structural and morphological analyses using X-ray diffraction (XRD) and scanning/transmission electron microscopies, respectively, demonstrated the formation of bare and ZnO decorated TeO2 NWs with desired phase and morphology. NO2 gas sensing studies were performed at different temperatures ranging from 50 to 400 oC towards 50 ppm NO2 gas. The results obtained showed that both sensors had their best optimal sensing temperature at 350 oC, while ZnO decorated TeO2 NWs sensor showed much better sensitivity towards NO2 relative to a bare TeO2 NWs gas sensor. The reason for the enhanced sensing performance of the ZnO decorated TeO2 NWs sensor was attributed to the formation of ZnO (n)/ TeO2 (p) heterojunctions and the high intrinsic gas sensing properties of ZnO.

Cu-doped ZnSe quantum dots were successfully synthesized in an aqueous solution using an internal doping method. The effects of ligand type, CuSe synthesis temperature, and heating time on Cu-doped ZnSe synthesis were systematically investigated. Of MPA, GSH, TGA, and NAC used as ligands, MPA was the optimal ligand as determined by PL spectrum analysis. In addition, the emission wavelength was found to depend on the synthesis temperature of the internal doping core of CuSe. As the temperature increased, the doping of Cu2+ was enhanced, and the emission wavelength band was redshifted; accordingly, the emission peaks moved from blue to green (up to 550 nm). Thus, the synthesis of Cu:ZnSe using internal doping in aqueous solutions is a potential method for ecomanufacturing of colortuned ZnSe quantum dots for display applications.