In this paper, we study the effect of cooling dehumidification process and wave heat exchanger on the reduction of white smoke and the efficiency by combination of heat exchanger with numerical analysis method. For this purpose, four types of heat exchange systems combined with 5-stage wave heat exchangers were selected to analyze the heat transfer characteristics of the heat exchange system in the winter condition. As the high temperature exhaust air flowed from HX 1 to HX 5, the final outlet temperatures of the four heat exchange systems(Cases 1, 2, 3 and 4) gradually decreased. The heat transfer rate and dehumidification amount were the best in Case 1 and Case 3, respectively. It can be seen that the heat flow in the heat exchanger is different according to the combination of the four kinds of wave heat exchanger and the fluid flow.

함정 외부 탑재 장비의 복잡한 형상에 의해서 발생하는 다중반사는 경로를 예측하기 어렵고 높은 RCS(Radar Cross Section) 의 원인이 된다. 따라서 함정의 외부 탑재 장비의 최적배치 설계가 RAS(Radar Absorbing Structure) 방법으로 고려되어야 한다. 본 논문에 서는 함정 외부 탑재 장비에서 발생하는 다중반사와 RCS를 최소화하기 위하여 함정 외부 탑재 장비 최적배치를 수행하였다. 외부 탑 재 장비 최적배치에 사용된 알고리즘은 순차적 내림차순 방법을 이용하였다. 함정 외부 탑재 장비 최적배치를 수행하기 위하여 LCS-2 type을 해석 모델로 선정하였다. 계산 비용을 줄이기 위해서 장비의 기여도 분석 및 다중반사 경로 분석 등을 통해 최적 배치를 수행 할 장비를 선정하였고 최적배치를 통해 RCS가 최소가 되는 최적배치 위치를 도출하였다. 또한 RCS 변화에 따른 레이다의 탐지거리 변 화율을 이용하여 RCS 감소효과를 분석 하였다.

현 경비 함정의 위치는 해양사고 위치와의 접근성이 떨어져 있어 합리적이고 과학적인 기준이 아닌 주관적인 판단으로 배치되 어 있다. 이에 본 연구에서는 과거 해양사고 데이터를 기반으로 정량적으로 최적의 경비 함정 배치 위치를 도출하고자 한다. 연구 해역은 포항 연안을 대상으로 하였다. 본 연구에서는 k-평균 군집화 알고리즘으로 경비 함정의 배치 위치를 도출한 후, 보로노이 다이어그램으로 각 경비 함정 간 경비 구역을 구획하였다. 연구 결과, 해양사고 1건당 경비 함정의 평균 항해 거리는 4.4해리, 평균 도착 시간은 13.2분이 개선될 수 있었다. 경비 함정을 유동적으로 배치 수를 달리해야 할 경우 본 연구에서 적용한 기법을 활용하여 최적 배치가 가능하며, 신 속한 구조 지원 체계가 더욱 확보될 것으로 판단된다.

Climate change has been identified as one with the greatest challenges facing nations, government, business and over future decades. Activities to reduce greenhouse gas emissions by the Kyoto Protocol, the international community has been in progress. Korea also has introduced the Emission trading system to reduce greenhouse emission from the supervision of the government. Greenhouse gases emissions quantity should be internationally recognized. Mutual Recognition Arrangement should be recognized as the same greenhouse gas emission. International recognition of domestic verification body of international mutual recognition is required. Efforts are needed to secure the equivalence between the emission rights through direct cooperation with the relative nation accreditation body. Early entry into the IAF/PAC GHG MLA is essential for demonstrating equivalence between greenhouse gas emissions. Emissions trading will also require connection to the EU ETS, California, USA, and Tokyo, Japan to link Emissions trading. In the case of establishing accreditation standards and accreditation criteria, it will be necessary to distinguish between the domestic Energy Target Management System and the Emission Trading System. Independent greenhouse gases verification bodies should be established to meet the requirements of IAF and PAC. It is necessary to revise the qualification criteria for the verification of the greenhouse gas verification body according to international standards requirements. It is necessary to support the role of accreditation bodies of domestic greenhouse gas verification bodies. It is required to join international organizations of international mutual recognition of international trade and the need for pilot projects to link greenhouse gas emissions. The core link to our emission trading system is called EU-ETS, and we will need to join the IAF/PAC GHG MLA GHG. The International Mutual Recognition Agreement (IAF) is expected to allow international interoperability of GHG emissions verification between EA and the PAC. By signing a PAC GHG MLA, it will need to be prepared to prepare for the pilot project to link the emission trading system.

가석방은 기간을 정하지 않은(부정기의) 조건부석방제도로, 자유형의 집행 중에 있는 자가 일정한 요건을 충족하는 경우 형기가 만료되기 전에 석방하는 제도이다. 가석방은 수형자 스스로의 개선노력을 유인하고 일정한 조건하에 자율적으로 사회의 구성원으로 잘 적응하여 재범방지와 사회복귀를 돕는 것으로 재사회화라는 교정의 목적과 부합한다. 우리나라는 1953년 형법을 제정하면서 가석방제도를 채택한 이래로, 1995년 개정형법에 의해 보호관찰과 결합시킴으로써 시설내처우에서 사회내처우로 전환된 형집행의 새로운 형태로 수형자의 개선과 사회복귀에 많은 성과를 거두고 있다. 그러나 현행 가석방의 경우 높은 형집행률과 낮은 가석방률로 인하여 가석방이 활성화되지 못하고 있으며, 이는 가석방 요건과 심사가 갖고 있는 문제로부터 초래된다고 지적되고 있다. 가석방 요건에 있어서는 주로 죄질과 형량에 기초한 일률적인 가석방, 실질적 심사사항의 주관성이 문제되며, 가석방 심사와 관련하여서는 수형자의 심사신 청권, 심사기관의 이원화, 불복제도 등이 문제된다고 할 수 있다. 가석방을 활성화하기 위한 구체적인 개선방안으로 가석방 요건 중 형집행기간을 선고형에 따라 다르게 하는 등 가석방 요건을 완화함과 동시에 일정한 경우에 직권에 의한 필요적 가석방 내지 수형자의 신청에 의한 가석방심사를 인정함으로써 수형자에게 가석방심사의 기회를 보장해주고, 이원화된 가석방심사기관을 일원화 및 상임화하며, 가석방심사위원회는 수형자의 가석방결정에 대한 이의신청기관으로 재구성할 것을 제안한다.

As an alternative to conventional explosive methods for demolition of concrete structures and rocks, the use of non-explosive demolition agents can be considered to reduce noise, vibration, and dust emissions during the demolition process. In this study, we conduct finite element analysis for crack initiation and propagation caused by the expansion of non-explosive demolition agents in square concrete structures. The predicted crack patterns are compared with the experimental results in the literature. The minimum values of the required expansion pressure of non-explosive demolition agents are also estimated, which depend upon the arrangement of non-explosive demolition agents and empty holes. Furthermore, we investigate the effect of empty holes on the fragmentation of concrete structures, and discuss the effective arrangement of non-explosive demolition agents and empty holes for fragmentation improvement.

가상의 심층처분 부지의 지하수 유동 모의 결과를 통해 처분 심도에 위치하는 처분공 지점에서의 지하수 유동량 및 해당 지 점에서 지표 환경까지 지하수가 유동하는 경로의 거리와 경로를 통과하는데 걸리는 시간에 대한 수량적, 공간적 분포를 분 석하여 그 결과를 처분공의 위치 결정에 이용할 수 있는 방안을 제시하였다. 지하수 유동량은 처분공 위치에서 계산된 지하 수위를, 유동 거리와 경과 시간은 입자 추적 기법(particle tracking)을 이용하여 계산하였다. 지하수 유동량 및 유동 거리와 경과 시간의 공간적 분포를 이용하여 처분시설의 성능을 유지하는데 상대적으로 유리한 위치를 선별하고 특정한 제한 조건 이 주어진 경우 제외되어야 하는 처분공 위치를 결정하여 처분공 배치에 이용할 수 있은 방안을 제시하였다. 또한 세 가지 정보를 함께 고려하여, 추가적인 처분공의 위치를 선정할 필요가 있을 경우 보다 유리한 확장 방향을 제시할 수 있는 방안도 논의되었다. 처분 심도에서의 지하수 유동 정보를 활용하여 처분공의 배치 방안을 결정하는 것은 처분시설의 성능 및 안전 성 확보를 위해 기여할 수 있을 것으로 생각된다.

The marine structures has a staggered array depending on the geographical characteristics of the surroundings. This wake flow occurs in the gap of such a staggered arrangement has a heavy influence on the vessels and structures. Also, Study on fluid flow around simple objects has contributed greatly to solve many engineering problems that occur in a variety of industries such as real fluid machinery, civil engineering, environment and etc. This study has progressed with changing aspect ratio and position of model by using PIV. It shows that speed reduction ratio is increased with the large movement of upper model and 1:2 aspect ratio.

Stress on plates may increase in the neighborhood the edges or the holes for rivets or bolts. Excessive stress concentration may lead to severe breakage of the plates. Thus, it is important to conduct optimization of arrangement of holes at the design stage. In this paper, accuracy of FEM analysis was examined for such stress concentration . By changing the hole size on a narrow plate, change of the stress concentration factor(K) was investigated. Additionally, the same experiment was conducted about series of multiple holes on plate to investigate interaction between the adjacent holes. Then, the FEM results were compared to the reference predictions respectively. Finally, a method by which simple stress concentrating situations can be optimized, will be suggested. This method was examined by FEM, and showed similar tendency with the expectation. Therefore, this method can be valuable when arranging the holes on a plate.

Simgok Seowon is the commemorative shrine and academy established for scholar Jo Gwangjo (pen name : Jeongam). The shrine (sangnyangsik) and the east and west dormitories (Dongjae and Seojae) were built in 1636. The lecture hall, Imsimnu Pavilion, Sananggak and Munhyanggak buildings were built successively. Simgok Seowon is the only one that survived through the abolishment of seowon ordered by Regent Heungseon in the 19th century. The original seowon was renowned as a representative example showing the typical lecture hall in front and dormitory at the back (jeondanghujae) layout of the Giho School built in 1650. Two archaeological excavations were conducted in the lecture hall courtyard in 2004 and 2007∼2008, which prompted debates the position of the dormitories in respect to the lecture hall, whether the dormitories should be placed in front, or at the back of the lecture hall. Simgok Seowon had been long known as a representative example of the lecture hall in front layout, but the excavations revealed contrasting evidence, suggesting the possibility for a dormitories in front layout. Recent studies and evidence show that the architecture of Simgok Seowon can be grouped into three phases. The first phase was when the shrine and both dormitories were built to the rear of the lecture hall, the second phase was when the lecture hall, Imsimnu Pavilion, Sananggak and Munhyanggak buildings were built, and lastly the third phase when the east, west dormitories were reconstructed in front of the lecture hall. The large scale construction of Simgok Seowon is related to the education based management of the academy by Doam Yi Jae, and the 17∼18th century remains confirmed from the archaeological excavations are evidence of this. Remains for Imsimnu Pavilion, Sananggak, and Munhyanggak buildings have yet to be confirmed, and spaces to the south and east of the seowon are unidentified. Therefore, it is necessary to conduct investigations and research for the unexcavated spaces of the seowon, to conduct in-depth studies and for the effective adaptive re-use of the seowon.

In recent years, single layer latticed domes have attracted many designers and researchers's attention all over the world, because single layer latticed domes as space structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. One of the most important factor, in building of single-layer single-layer lattice spherical dome with 300m span, is to ensure the structural safety. Network pattern of single layer latticed domes can be infinitely taken into account. The typical network patterns are triangle, square, hexagon etc. Especially triangular network pattern has mechanically more advantage than the other network patterns because of having not only a large equivalent shearing rigidity but also a large equivalent bending rigidity and axial rigidity. Among the triangular network pattern, that is, 3 way grid pattern, there are many mechanical differences according to the arranging methods of members. In order to ensure the structural stability of single-layer latticed dome with 3 way grid, designers are required to maintain a constant member length and the member angle. In order to achieve this, it is important to search the member array that the standard deviation of the member lengths and angles is the smallest. This paper is to develop the arrangement of member and to verify its validity for single-layer latticed spherical dome with 300m span.

The purpose of this study was investigated heat flow and heat transfer coefficient characteristics of around tube when changing the tube arrangement type and heat transfer area. When  ≒1∼4, convective heat transfer coefficient of staggered and aligned arrangement was increased. Growth rate of the heat transfer coefficient becomes smaller in case of ≒5∼8 because a change in the turbulence was very small. At the staggered arrangement, all tubes were always arranged in front of the open passage between the back of the tube. Then, the entire surface area of the tube was exposed to the main flow. Thus growth rate of heat transfer coefficient appear larger than aligned arrangement.

막 증류법은 다양한 형태로 운전이 가능하며 각각의 운전의 경우에 따라 물 질전달 계수 및 열전달의 효율이 다르게 나타난다. 또한, 모듈 형태 뿐 아니라 배관의 크기와 배열의 영향을 많이 받게 되는데 원수의 쏠림 현상이 발생할 뿐 만 아니라 수투과도를 향상시킬 수 없는 단점이 있다. 이에 본 연구를 통해 처 리수 생산량을 극대화하고 비용(원자재, 에너지, 인건비)은 최소화할 수 있는 모듈 및 배열의 최적 조건을 도출하였다. 실험에 사용된 분리막은 (주)에코니티에서 제조되었으며 사용된 원수는 염화나트륨 3.5%, VMD (Vacuum Membrane Distillation) 방식으로 실험을 실시하였다.

In order to understand evolutionary characteristics of gene rearrangement in Lepidoptera, we collected all available complete mitogenome (mitogenome) sequences registered in GenBank (274 mitogenomes from 44 families in 23 superfamilies as of August 6, 2015). It turned up six rearrangements that differ from the arrangement of ancestral insects, including that of the gelechioid Mesophleps albilinella that we sequenced in this study. The M. albilinella mitogenome has a unique gene arrangement among the Gelechioidea: ARNESF (the underline signifies an inverted gene) at the ND3 and ND5 junction, as opposed to the ARNSEF that is found in ancestral insects. Most of the rearrangements can be explained by the tandem duplication-random loss model, but inversion, which requires recombination, is also found in two cases, including M. albilinella. Excluding the MIQ rearrangement at the A+T-rich region and ND2 junction, which is found in nearly all Ditrysia, most of the remaining rearrangements found in Lepidoptera appear to be independently derived in that they are automorphic at several taxonomic scales. Current mitogenomic data are limited, particularly for congeneric data. Thus, future research focused on congenerics could clarify evolutionary independency at the generic level also.

해양암반이나 구조물 해체를 위한 전통적인 방법은 다이나마이트를 이용한 발파공법, 잭해머(Jackhammer)를 이용한 공법이다. 이러한 방법은 소음이나 폭발의 위험등으로 인해 사용에 많은 제약이 따른다. 이런 제한된 상황에서 사용할 수 있는 무소음화학팽창제(SCDA)의 사용이 증가하고 있는 추세이다. 그러나 무소음화학팽창제의 사용에 관한 규격이나 설계 및 시공에 대한 제안서는 현재 전무한 상황이다. 따라서 본 연구에서는 다양한 조건(구조물의 구속, 천공홀의 크기, 천공홀의 수 등)에서 콘크리트 구조물에 균열이 생성, 진전될 수 있는 최소요구팽창압을 예측하였다.

We sequenced the complete mitochondrial (mt) genome of Camponotus atrox (Hymenoptera: Formicidae) that is distributed only in Korea. This genome is 16,540 bp in size, contains typical sets of genes (13 protein-coding genes, 22 tRNAs, and two rRNAs). The C. atrox A+T-rich region is the longest in the sequenced ants as 1,402 bp and is comprised of an identical tandem repeat consisting of six 100-bp copies and one 96-bp copy. A total of 315 bp of intergenic-spacer sequences were spread over 23 regions. An attempt to align spacer sequences in ants turned out that alignment was mostly feasible among congeneric species, with a substantial sequence divergence, indicating the potential of these sequences as congeneric molecular markers. The A/T content in first and second codon positions of PCGs are similar in ants including C. atrox (73.9 vs. 72.3% on average). Estimation of degree of genetic divergence (e.g. non-synonymous substitution rate) with an increased taxon sampling among hymenopteran superfamilies indicated the presence of different rates of divergence between the suborders Symphyta and Apocrita as has previously been reported. The C. atrox mt genome has a unique gene arrangement, trnI-trnM-trnQ at the A+T-rich region and ND2 junction (underline for inverted gene), possibly originated from tandem duplication of trnM-trnI, resulting in trnM-trnI-trnM-trnI-trnQ and loss of first trnM and second trnI, resulting in trnI-trnM-trnQ.

This paper aimed at modeling a fine triangular grid for network dome by using Harmony Search (HS) algorithm. For this purpose, an optimization process to find a fine regular triangular mesh on the curved surface was proposed and the analysis program was developed. An objective function was consist of areas and edge's length of each triangular and its standard deviations, and design variables were subject to the upper and lower boundary which was calculated on the nodal connectivity. Triangular network dome model, which was initially consist of randomly irregular triangular mesh, was selected for the target example and the numerical result was analyzed in accordance with the HS parameters. From the analysis results of adopted model, the fitness function has been converged and the optimized triangular grid could be obtained from the initially distorted network dome example.