To develop Gastrodia elata (GE)-loaded particles for herbal extract dosage forms, various GE-loaded particles containing dextrin, isomalt, maltodextrin, and silicon dioxide as solidifying carriers in the GE water extract are prepared using the spray drying method. Their physical properties are evaluated using the repose angle, Hausner ratio, Carr's index, weight increase rate at 40oC/75% RH condition, and scanning electron microscopy (SEM). Particles made of dextrin improve the fluidity, compressibility, and water stability. In addition, 2% silicon dioxide increases the fluidity and moisture stability. The best flowability and compressibility of GE-loaded particles are observed with TP, dextrin, and silicon dioxide amounts in the ratio of 6/4/0.2 (34.29 ± 2.86°, 1.48 ± 0.03, and 38.29 ± 2.39%, repose angle, Hausner Ratio, and Carr’s index, respectively) and moisture stability with a 2% weight increase rate for 14 h at 40oC/75% RH condition. Therefore, our results suggest that the particles prepared by the spray drying method with dextrin and 2% silicon dioxide can be used as powerful particles to improve the flowability, compressibility, and moisture stability of GE.

As a case study on aspect ratio behavior, Kaolin, zeolite, TiO2, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 mm media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D50, ~6 μm are shifted to submicron size, D50 ~0.6 μm after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

The study aims to use asphaltene particles (As) extracted from natural bitumen to synthesize activated carbon (ACAs). The asphaltene particles were mixed with a fixed weight of potassium hydroxide (KOH) as an activating agent, preheated to 600 °C, and then treated with 15% hydrofluoric acid (HF). The methylene blue (MB) 20 mg/l was used to determine the adsorption capacity of ACAs and reactivated carbon (RACAs). The morphology of ACAs and its components were characterized using scanning electron microscopy–energy dispersive X-ray (SEM–EDX) and Fourier-transform infrared spectroscopy (FTIR). The study included the application of adsorption isotherms Freundlich and Langmuir on the experimental data of the studied systems. The yield of ACAs was 92% of the raw material. The activated carbon displayed high adsorption capacity and can be reprocessed after reactivation using microwave radiation. The active surface area of ACAs is found to be 970 m2/g. The effectiveness and adsorption ability of ACAs and RACAs, as proven by its adsorption capacity (218.15 and 217.907 mg/g) for MB, demonstrate that ACAs and RACAs have a large external surface area and an extensive array of pores. The ACAs are most sensitive at 30 °C and neutral pH. The results also showed that the isotherms have a good fit to the experimented data.

본 연구에서는 가압식 분리막 여과에서 무기입자의 존재가 유기파울링에 미치는 영향을 관찰하였다. 유기파울링의 유발을 위해 알긴산나트륨(sodium alginate, SA)를 이용한 정밀여과 실험에서 무기 실리카(SiO2) 입자의 존재 유무와 상관 없이 분리막 파울링은 여과초기 완전공극막힘에서 여과시간이 경과할수록 케이크 형성에 의해 주로 지배되었다. 그러나 무기 입자의 존재 시 정압여과에서 알긴산나트륨 파울링 케이크 비저항값과 압축성은 상대적으로 낮게 관찰되었고 이로 인해 낮은 파울링 속도가 관찰되었다. 동일한 시료를 이용한 정량여과 실험을 수행한 결과 정압여과에 비해 정량여과에서 여과초기 공극막힘현상 및 파울링 속도는 더욱 증가하였다. 이와 같은 현상은 파울링층이 지닌 압축성으로 막간차압의 증가 시 케이크 비저항값이 함께 증가하였기 때문인 것으로 판단된다. 알긴산나트륨과 실리카 입자가 함께 존재 시 알긴산나트륨이 단독으로 존재하는 것보다 수리학적 세정을 통한 파울링 제거효과는 더욱 좋은 것으로 관찰되었다.

Viral protein 2 (VP2) of porcine parvovirus (PPV) is responsible for inducing neutralizing antibodies in immunized animals. It is the major viral structural protein. In this study, novel subunit vaccines against PPV based on virus-like particles (VLPs) formed from VP2 proteins (PPV 13-7 Korean strain) were expressed in an insect baculovirus cell system and purified using Ni-NTA affinity column chromatography. These VP2 proteins assembled into virus-like particles (VLPs). They showed antigenic properties similar to those of natural PPV. In addition, they showed high hemagglutination (HA) titers (211 for PPV 13-7 Korean strain). This study provides a foundation for the application of the difference immunization of recombinant protein in the diversity of PPV VP2 genes and in vaccination against PPV in the future.

A coal dust scattered from storage and transfer facilities of coal power plant is led to a air pollution. It is difficult to reduce some scattered coal dust by used filter system such as bag filter and electric precipitator because of being scattered in the large area. The need to cut down coal dust generation has been increased as being reinforced regulation to reduce dust from coal power plant. So this is a experimental basic study which reduces coal dust generation. This study is to reduce scattering rate of the coal dust by collision and interception between fine fog droplet and coal dust particles. The reducing rate of coal dust is evaluated by droplet size of 10㎛ sprayed. It is evaluated that capture efficiency is lower as a coal dust concentration become higher. And also it is increase as droplet size is decrase and droplet density is increase. It is resulted that coal dust coefficient to optimize the fog system design is 25μg/m3/l/hr and capture efficiency of coal dust is about 80%.

To develop Taraxacum platycarpum extract (TP)-loaded particles for tablet dosage form, various TP-loaded particles composed of TP, dextrin, microcrystalline cellulose (MCC), silicon dioxide, ethanol, and water are prepared using a spray-drying method and fluid-bed-drying method. Their physical properties are evaluated using angle of repose, Hausner ratio, Carr’s index, hardness, disintegrant time, and scanning electron microscopy. Optimal TP-loaded particles improve flowability and compressibility. Furthermore, 2% silicon dioxide gives increased flowability and compressibility. The formula of TP-loaded fluid-bed-drying particles at a TP/MCC/silicon-dioxide amount of 5/5/0.2 improves the angle of repose, Hausner ratio, Carr’s index, hardness, and disintegrant time as compared with the TP-loaded spray-drying particles. The TP-loaded fluid-bed-drying particles considerably improve flowability and compressibility (35.10° vs. 40.3°, 0.97 vs. 1.17, and 18.97% vs. 28.97% for the angle of repose, Hausner ratio, and Carr’s index, respectively), hardness (11.34 vs. 4.7 KP), and disintegrant time (7.4 vs. 10.4 min) as compared with the TP-loaded spray-drying particles. Thus, the results suggest that these fluid-bed-drying particles with MCC and silicon dioxide can be used as powerful particles to improve the flowability and compressibility of the TP.

Tungsten heavy alloys (W–Ni–Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

The baculovirus-insect cell expression system has been widely used method for the recombinant protein expression. The present study has several limitation. In this study, we constructed vectors consisting of transcriptional enhanced factor and promoter that improve the expression level. To confirm the usefulness of these vector system, Human papillomavirus (HPV) VLPs have been expressed by baculovirus hyper expression system. HPV VLPs were purified using a CaptoTM Core 700 (GE Healthcare Life Sciences) chromatography approach. Baculovirus hyper expression system production efficiency was influenced by the HPV VLPs production. HPV VLPs vaccination to BALB/c mice induced the generation of antibody confirmed by ELISA. This study could provide improvements on the vaccine production for the development of VLP vaccines high expression of useful heterologous proteins.

Among the various expression systems used for foreign protein expression, baculovirus expression system (BES) has the high level of post-translational modification ability such as glycosylation, folding and disulfide bonding. BES is widely used now in the production of VLPs because it is possible for the efficient multi-gene expression. However, there are not many cases of VLPs being manufactured through BES. Therefore, in this study, three improvements were made to increase the productivity of VLP through BES. A new heper enhanced expression vector was constructed to increase the expression of structural proteins of virus-like particles, and baculovirus bacmid was modified to increase production time. In addition, an easy purification system was constructed to efficiently purify VLP, and finally the construction of BES optimized for VLP production was completed.

In this study, 40 residents of the Gwangyang and Yeosu areas were assessed for their level of exposure to heavy metals (As, Cd, Ni) from April 2017 to June 2018. The aim was to understand the differences in levels of indoor exposure to heavy metals (As, Cd, Ni), and a health risk assessment was conducted to determine whether there was any fatal cause from carcinogenic elements. The mean concentrations of PM10 particles indoors were As 0.24 μg/m3, Cd 0.07 μg/m3, and Ni 0.89 μg/m3. The health risk assessment for the arsenic, cadmium, and nickel in indoor air confirmed that the mean values exceeded the cancer risk tolerances specified by the U.S. EPA, for As (males 3.07 × 10−4, females 3.35 × 10−4), Cd (males 3.83 × 10−5, females 4.18 × 10−5), and Ni (males 6.36 × 10−5, females 6.95 × 10−5).