The internal displacement of the corrugated steel plate structure reduces structural stability. In this study, we developed a smart checking system to evaluate the stability of the corrugated steel plate culvert structure by laser scanning and image mapping. It is expected that output data can be used in inspecting deformation rates between designs and measured 3D shapes. Also, it can solve the problems in current visual inspection and systemize the inspection tasks scientifically.

We have studied the optimum location of the sensor to evaluate the condition of the structure by performing the structural analysis on the landing pier. It is judged that it is appropriate to place the strain sensor of the landing pier at the upper part, the middle part and the upper part of the pile at 30% below the pile.

The internal displacement of the corrugated steel plate structure reduces structural stability. In this study, we evaluated the stability of the corrugated steel plate culvert structure using an inspecting deformation rates between designs and measured 3D shapes. Also, a proper repair and reinforcement method will be proposed through analytical and experimental verification

Stability of labor market in rural areas was analyzed in this paper with categories of industrial group, employment scale, surviving period, and founder group. The stability of each classified labor market was compared with each other to figure out the stable business class and the unstable class in rural areas. The results of rural areas were compared with those of urban areas. The stability was analyzed with average and coefficient of variation (C.V.) of annual total employees’ change rates. It was revealed that labor market of ‘primary industry’, including agriculture, is unstable. Especially, labor market of ‘mid-size’ and ‘primary industry’ businesses founded as ‘incorporated company’ in rural areas is vulnerable. While labor market of ‘large-size’ is proved to be unstable, it is confirmed that ‘small-size’ or ‘mid-size’, and ‘over-ten-year survived’ businesses have positive contribution to the stable labor market in rural and urban areas. The results show that the stability of labor market is different in each category of business and in each region of rural or urban area. It is expected that the results can be utilized for the regional development policies, of labor and industry part.

As the amount of slag generated annually increases, attempts to recycle slag as high value products are underway in order to develop an efficient resource recycling industry based on slag and derive economic benefits as well. However, the application of electric arc furnace (EOS) slag as construction material is practically limited because of the unstable substances included in it, such as free CaO.(EOS contains a small amount of free CaO, but several limitations still exist. Slag is stored for more than 3 months depending on the quantity of slag, which leads to additional economic loss. In this study, the amount of free CaO present in EOS is quantitatively evaluated to examine its qualities as a potential construction material and verify its application as concrete material. The quantitative analysis of free CaO present in EOS is performed using ethylene glycol. The free CaO contents of EOS samples were found to be below 0.5%. This satisfies the criteria specified in KS F 4571, which states that the CaO content should be below 40% and CaO/SiO2 ratio should be below 2.0. In addition, it was confirmed that free CaO content difference appears to be dependent on the aging period and storage position.

The internal displacement of the corrugated steel plate structure reduces structural stability. In this study, we developed a smart checking system to evaluate the stability of the corrugated steel plate culvert structure by laser scanning and image mapping. It is expected that output data can be used in inspecting deformation rates between designs and measured 3D shapes. Also, it can solve the problems in current visual inspection and systemize the inspection tasks scientifically.

We have studied the optimum location of the sensor to evaluate the condition of the structure by performing the structural analysis on the landing pier. It is judged that it is appropriate to place the strain sensor of the landing pier at the upper part, the middle part and the upper part of the pile at 30% below the pile.

The internal displacement of the corrugated steel plate structure reduces structural stability. In this study, we evaluated the stability of the corrugated steel plate culvert structure using an inspecting deformation rates between designs and measured 3D shapes. Also, a proper repair and reinforcement method will be proposed through analytical and experimental verification.

IMO는 선박의 조종성능과 복원성능에 관한 국제적 기준 마련에 노력해 왔다. 이러한 움직임은 해상에서의 선박 안전 향상에 기 여하였으며, 선박 연구자가 수행하는 학술적 연구의 방향에도 영향을 미쳤다. 기존의 수행된 선박 조종성능과 조종성능 연구는 각각 그 분야 에서 독립적으로 수행되어 왔다. 두 분야의 상호 관계에 관한 연구는 미비한 실정이다. 이에 본 논문에서는 선박의 조종성능과 복원성능의 상 호 관계를 정량적으로 규명하고자 기초적인 실험 연구를 수행하였다. 각 두 항목을 나타내는 지표로 복원성능은 GM 변화를 사용 하였고, 선 박의 조종성능은 선회성능을 선택하여 이 두 지표의 상호관계에 관해 정량적인 분석을 시도하였다. 이를 위하여 자유 항주 모형선을 이용한 선회 실험을 실시하고, GM변화에 따른 선회 반경 및 선회 중 발생하는 최대 횡경사 각도의 변화를 분석 하였다. 실험 결과 GM에 따른 선회 반경 감소 및 초기 횡경사 증가의 경향이 서로 다르게 나타났다. 이를 이용하여, GM 감소에 따른 선회반경 및 초기 횡경사 변화 예측을 위한 개략적인 경향 추정식을 제안 하였다. 선박은 운항 중 예상하지 못한 원인으로 갑작스럽게 GM이 감소 할 수 있다. 본 논문에서 얻은 실험 결 과는 GM감소량에 따른 선박의 선회반경 및 조타에 의한 횡경사 각도 변화 크기를 개략적으로 추정하기 위한 기초 자료로 활용 될 수 있을 것으로 기대된다.

Recycled aggregate is not used the structures due to the negative perception of the quality. Using only recycled aggregate concrete structures to improve these recognition were constructed to evaluate the mechanical properties and durability. The result is determined to be applicable to 100% recycled aggregate concrete in the structure.

In the case of railway bridges through the downtown section is required for noise reduction performance is excellent bridge type. According to this request, the bridge of the noise barrier installation is not required and low vibration is under development. This railway bridge is corrugated steel plates composite lower route bridge. Because the bridge cross-section wraps a train, noise is reduced. In this study, Using a commercial finite element analysis program, the dynamic stability evaluation is performed.

This study focused on the evaluation of stability of mercury compounds in byproducts from industrial facilities. Stability testing was conducted using a 5-step sequential extraction procedure using six kinds of byproducts. The mercury compounds extracted were categorized as ion-exchangeable (F1), acid soluble (F2), organic matter-bound (F3), strong complex (F4), and residual (F5) mercury compounds. The amount of mercury in each step was calculated and compared with total mercury amount; a 51% to 92% recovery rate was estimated. Hg-extracted F1, F2, and F3 were easily released into environment. It is necessary to apply an appropriate method to handle byproducts that contain these portions of mercury. On the other hand, mercury in F4 and F5 fraction is relatively more stable. F4 fraction means strong complex and elemental mercury. Byproduct from metal production facility has a higher elemental mercury fraction. It was found that 89% and 65% of mercury were contained in F4 fractions from fly ash and sludge, respectively. The goal of this study is to investigate stability of Hg compounds in different byproducts to suggest appropriate treatment methods for each byproduct on its Hg compound characteristics.

Wolff-Parkinson-White syndrome (WPW) is a common disorder of the conduction system of the heart. Patients with such disorder may be asymptomatic or present with cardiac symptoms like palpitation and dyspnea. The anesthetic management of these patients is challenging as they are known to develop life threatening tachyarrhythmia. We report a hemodynamic management of a 53-year-old male with WPW syndrome scheduled for laparoscopic cholecystectomy under general anesthesia. We performed total intravenous anesthesia with propofol and remifentanil, and we placed the laryngeal mask airway behind the endotracheal tube using Bailey's Maneuver before extubation of endotracheal tube.

본 연구에서는 파이토케미컬 펩타이드 유도체를 포함하는 니오좀 및 리포좀 제형의 안정성을 조사하였 다. 여러 가지 조건에서 레시틴 혹은 계면활성제를 이용하여 제조된 리포좀 중에서 sodium palmitoyl sarcosinate와 마카다미아넛 오일을 이용한 니오좀의 안정성이 제일 우수하였다. 파이토케미컬 펩타이드 함유 니오좀 (N9)의 형태는 TEM으로 확인하였으며, 입자크기는 95.7 nm로 관찰되었다. N9의 안정성은 Turbiscan 결과 (0°와 45°)와 제타포텐셜(－78.19 mV)로 확인하였다. N9의 펩타이드 봉입률은 BCA assay 결과 65.2%로 관찰되었다.

본 연구에서는 정제수/Span 80-Nikkol BL 25/오일계의 water-in-oil (W/O) 나노에멀젼을 높은 온 도에서 PIC 유화로 제조하였다. 이 방법은 본 시스템에서 미세하게 분산된 저점도의 W/O 나노에멀젼의 형성을 가능케 하였다. 그러나 실온에서 PIC 방법으로 제조된 에멀젼은 나노에멀젼보다는 마크로에멀젼이 제조되었다. 유화온도가 30 ℃에서 80 ℃로 증가하면 온도에 따른 계면장력의 큰 변화의 결과로 입자 크기는 2 μ m에서 100 nm 정도로 감소하였다. 80 ℃에서 제조된 나노에멀젼의 입자 크기는 50 ∼ 200 nm 범위에 있었고 내상의 분율 은 15 wt%까지 가능하였다. 또한 혼합 유화제의 최적 HLB는 7.0 부근에서 가장 안정한 나노에멀젼이 형성되었 다. 제조된 나노에멀젼은 1개월 이상 실온에서 안정하였다. 본 연구 결과는 저점도의 W/O 나노에멀젼의 형성 최적화에 중요한 정보를 제공할 수 있다. 이 결과는 W/O 나노에멀젼의 저점도로 인한 부드러운 사용감 등으로 화장품 제형으로 유용하게 이용될 것으로 생각된다.

The purpose of this study was to examine the effect of horticulture occupation therapy program via healing garden which is increasing the emotional stability and hand Dexterity enhancement on pre-vocational rehabilitation of chronic mental disorder. The current study included 29 patients who were diagnosed as chronic mental disorder under the rehabilitation service at E capital hospital in Seoul from February to December 2010. All of patients participated with agreement in this study, then were divided randomly by experimental (n=17) and control groups (n=12). Therapeutic program was consisted with total 38 sessions, and performed once a week for 10 months. Experimental group was treated with horticultural occupational therapy program using a healing garden (one time), as well as general occupational therapy (four times) in a week. Control group was conducted only general occupational therapy five times a week. To evaluate the effects of program, physical and psychological stress test and hand dexterity test was used before and after program. The program was based on the person-centered therapy, then paired t-test was used to compare the results before and after the program. In the results of present study, there were no significant differences of psychological and physical stress between before and after the therapy in experimental and control group, respectively. However, hand dexterity of experimental group was markedly changed between before (112..4±50.9 sec) and after (82.1±40.6 sec) therapy. Moreover, the speed of performance in GPT was increased with rising therapeutic sessions, indicating the hand dexterity was improved after program. These results demonstrated that horticultural occupation therapy program using the healing garden is beneficial for pre-vocational rehabilitation of chronic mental disorder.

This paper is presented in progressive improvement of the construction and maintenance for corrugated steel plate culverts in Korea expressway. After reviewing the technical consulting reports and field surveying this whole structures. It is effectively help to minimize damage and improve the stability of structures.

An ordinary perforated drainpipe is often clogged with fines due to soil erosion or breakage of rock mass. Three different types of fiber drainpipes were proposed and tested for drainage capacity using laboratory soil box. A perforated drainpipe with inner fiber layer showed a good performance of drainage and selected for field testing. From the field testing, a perforated drainpipe with inner fiber layer drained well compared to an ordinary perforated drainpipe.

This study compares the steel column-base plate connections to improve the flexural capacity of small building. In addition, performance level was evaluated by example building. Analysis results, an additional reinforcement is required to the proposed steel column-base plate connection. And then, We should compared the impact of beam-column joints.