Catharanthus roseus로부터 생산되는 빈카알칼로이드는 암을 치료하는 데에 사용되는 가장 중요한 천연물 중의 하나이다. 이러한 항암제는 두 단량체 인돌 알칼로이드인 catharanthine과 vindoline의 결합으로 합성될 수 있다. 이 중 vindoline의 생합성에 관계하는 경로를 조사하기 위해서 tabersonine의 메틸기에 중수소를 치환한 전구체인 tabersonine-CD3 1a를 합성하였다. 이는 중수소의 질량 증가로 인해 자연에서 발생하는 tabersonine과 뚜렷이 구별될 수 있도록 해 준다. 우리는 이 중소소가 치환된 tabersonine 1a가 성공적으로 vindoline 생합성경로에 편입되어 중수소가 치환된 3개의 새로운 vindoline 중간체(2a, 3a와 4a)를 생성함을 보였다. 세포현탁배양액에 tabersonine-CD3 1a를 주입한 5일과 13일째에 생성된 대사물인 16-Hydroxytabersonine-CD3 (m/z 356) 2a, 16-Methoxytabersonine-CD3 (m/z 370) 3a와 16-Methoxy-2,3-dihydro-3- hydroxytabersonine-CD3 (m/z 388) 4a의 생성량을 UPLC/MS를 사용하여 측정하였다. 출발물 1a에서 생성물 2a, 그리고 2a에서 3a로의 전환은 빨랐던 반면 3a에서 4a로의 전환은 상대적으로 훨씬 느렸다. 따라서 각 대사물들의 상대적 전환속도를 서로 비교해 보았을 때 vindoline 생합성 과정의 첫 세 단계 중에서 가장 느린 마지막 단계가 속도결정단계임을 암시한다. 즉 대사물 3a에서 4a로의 느린 전환속도의 결과, 배양 후 13일까지도 3a의 축적률이 현저히 증가됨을 보였다. 배양 5일째의 대사물 2a, 3a와 4a의 축적비는 각각 1, 2와 0.1이었다. 그러나 desacetoxyvindoline-CD3 5a, deacetylvindoline-CD3 6a와 vindoline-CD3 7a의 피크는 배양 13일 후에도 발견되지 않아 세포현탁 배양액에 각 생합성단계와 관련된 효소들이 존재하지 않음을 알 수 있었다.

The crystal structure and magnetic properties of a new solid solution type ferrite (Fe2O3)5-(Al2O3)3.4-(Ga2O3)0.6-SiO were investigated using X-ray diffraction and Mössbauer spectroscopy. The results of the X-ray diffraction pattern indicated that the crystal structure of the sample appears to be a cubic spinel type structure. The lattice constant (a = 8.317 Å) decreases slightly with the substitution of Ga2O3 even though the ionic radii of the Ga ions are larger than that of the Al ions. The results can be attributed to a higher degree of covalency in the Ga-O bonds than in the Al-O and Fe-O bonds, which can also be explained using the observed Mössbauer parameters, which are the magnetic hyperfine field, isomer shift, and quadrupole splitting. The drastic change in the magnetic structure according to the Ga ion substitution in the (Fe2O3)5(Al2O3)4-x(Ga2O3)xSiO system and the low temperature variation have been studied through a Mössbauer spectroscopy. The Mössbauer spectrum at room temperature shows the superpositions of two Zeeman patterns and a strong doublet. It shows significant departures from the prototypical ferrite and is comparable with the diluted ferrite. The doublet of spectrum at room temperature appears to originate from superparamagnetic clusters and also the asymmetry of the doublet appears to be caused by the preferred orientation of the crystallites. The Mössbauer spectra below room temperature show various complicated patterns, which can be explained by the freezing of the superparamagnetic clusters. On cooling, the magnetic states of the sample were various and multi critical.

The influences of Na and K content on the crystal phase, the microstructure and the electrical property of BaTiO3-based thermistors was found to show typical PTC effects. The crystal phase of powder calcined at 1000˚C for 4hrs showed a single phase with BaTiO3, and the crystal structure was transformed from tetragonal to cubic phase according to added amounts of Na and K. In XRD results at 43˚~47˚, the (Ba0.858Na0.071K0.071)(Ti0.9985Nb0.0015)O3-δ showed (002) and (200) peaks but the (Ba0.762Na0.119K0.119)(Ti0.9975Nb0.0025)O3-δ showed (002), (020) and (200) peaks. In sintered bodies, those calcined at 600˚C rather than at 1000˚C were dense, and for certain amounts of Na and K showed rapid decreases in grain size. In relative permittivity, the curie temperature due to the transformation of ferroelectric phase rose with added Na and K but decreased in terms of relative permittivity. In the result of the R-T curve, the sintered bodies have curie temperatures of about 140˚C and the resistivity of sintered bodies have scores of Ω·cm; the jump order of sintered bodies was shown to be more than 104 in powder calcined at 1000˚C.

Na+ ion conductivity can be improved by the substitution of an Mg atom for an Al atom to form a nonstoichiometric Na+ β-alumina. We performed a first principles study to investigate the most stable substitution site of an Mg atom and the resulting structural change of the nonstoichiometric Na+ β-alumina. Al atoms were classified as four different layers in the spinel block that are separated by conduction planes in the nonstoichiometric Na+ β-alumina. The substitution of an Mg atom for an Al atom at a tetragonal site was more favorable than that at an octahedral site. The substitution in the spinel block was more favorable than that close to the conduction plane. This result was well explained by the volume changes of the polyhedrons, by the standard deviation of the Mg-O distance, and by the comparison with bulk MgO structure. Our result indicates that the most preferable site for the Mg atom was the tetrahedral site at the spinel block in the nonstoichiometric Na+ β-alumina.

Kinetic studies on the ligand substitution reactions of cyanocomplexes were performed in several micellar solutions. It showed the observed rate constants was found to be independent of the entering ligand concentration at high concentration of cyanopyridine and pyrazinecarboxylate. We could see also that in nonionic and anionic micellar solutions no influence of changes in the surfactant concentration on the observed rate constants was found. Taking into account the hydrophilic nature of the cobalt complex, the cobalt complex molecule was expected to be located in the aqueous phase of the micellar systems, where the reaction would take place. In cationic micellar solutions, a small increase in the observed rate constant was found when the cationic surfactant concentration increased. After reaching a maximum, the rate constant decreased on increasing surfactant concentration and subsequently it reached a plateau, where the observed rate constant was independent of changes in the surfactant concentration.

열적, 기계적, 화학적 안정성이 우수한 제올라이트 분리막의 물/에탄올 선택도를 이온교환 실험을 통해 더욱 효과적으로 높이고자 하였다. KA형 제올라이트 분리막을 직접 합성하는 것은 용이하지 않으므로 NaA형 제올라이트 분리막을 합성한 후 이를 다시 이온교환 하여 KA형 제올라이트 분리막을 제조하였다. 공급되는 에탄올의 농도 변화 및 투과 증발실험 온도의 변화가 투과플럭스와 물 선택도에 미치는 영향을 고찰하였다. 이온교환 실험 후 전체 투과플럭스는 감소하였고 물 선택도는 증가함을 관찰할 수 있었다.

High-energy mechanical milling (HEMM) and sintering into Al-Mg alloy melt were employed tofabricate an Al alloy matrix composite reinforced with submicron and micron sized Al2O3 particles. Al-basedmetal matrix composite (MMC) reinforced with submicron and micron sized Al2O3 particles was successfullyfabricated by sintering at 1000oC for 2h into Al-Mg alloy melt, which used high energy mechanical milled Al-SiO2-CuO-ZnO composite powders. Submicron/micron-sized Al2O3 particles and eutectic Si were formed by in situdisplacement reaction between Al, SiO2, CuO, and ZnO during sintering for 2h into Al-Mg alloy melt and werehomogeneously distributed in the Al-Si-(Zn, Cu) matrix. The refined grains and homogeneously distributedsubmicron/micron-sized Al2O3 particles had good interfacial adhesive, which gives good wear resistance withhigher hardness.

Furnace slag powder used currently in Korea needs to add special functions in response to the increase of large-scale projects. In addition, it is advantageous in that it has a lower hydration heat emission rate than ordinary Portland cement and improves properies such as the inhibition of alkali aggregate reaction, watertightness, salt proofness, seawater resistance and chemical reslstance. However, furnace slag powder is not self-hardening, and requires activators such as alkali for hydration. Accordingly, if recycled fine aggregate, from which calcíum hydroxide is generated, and furnace slag, which requires alkali stimulation, are used together they play mutually complementary roles, so we expect to use the mixture as a resource-recycling construction material. Thus the present study purposed to examine the properties and characteristics of furnace slag powder and recycled aggregate, to manufacture recycled fine aggregate mortar using furnace slag and analyze its performance based on the results of an experiment, to provide materials on mortar using furnace slag as a cement additive and recycled fine aggregate as a substitute of aggregate, and ultimately to provide basic materials on the manufacturing of resource-recycled construction materials using binder and fine aggregate as recycled resources.

Previous researches for increasing the durability of concrete structures examined the characteristics of concrete using glycol ether admixture, and determined the optimal addition rate and evaluated durability of concrete. However, today’ s ready mixed concrete uses various industrial byproducts in order to improve the performance of concrete, and the quality of concrete changes depending on the addition of glycol ether admixture and curing condition. Considering this, we need to understand the characteristics of curing methods according to field condition. Thus, the present study evaluated the effects of replacement with fly ash as a binder and curing conditions (temperature and humidity) on the performance of concrete, and obtained data from a mock-up test for the practical use of concrete containing glycol ether admixture. According to the results of this study, the concrete showed resistance performance of around 30% to carbonation and around 40% to drying shrinkage. In addition, as for resistance to freezing and thawing, the relative dynamic modulus of elasticity was over around 85% through atmospheric curing. These performances prove the effect.

Catalytic activity changes of perovskite catalysts were examined with their A-site substitution. For the preparation of catalysts, Mn was used for B-site component and La, Ce, Sr, Ba, Ca, Ag were used for A-site component of the perovskite catalysts(ABO3) The effect of calcination temperature on methane combustion and perovskite structure was also investigated. The surface area and adsorbed oxygen species were tested with BET apparatus and O2-TPD, respectively. Perovskite catalysts whose A-site was partially substituted needed higher calcination temperature than un-substituted one to form the perovskite structure. From O2-TPD experiment, it was found that methane combustion activity was directly related to the oxygen desorbing ability of the catalysts. The prepared catalyst(LM-7) was stable at 600℃ for 72 hours of reaction.

The rapid growth of translation studies has made remarkable progress in the old ‘literal vs. free’ translation debate. Now it is clear that a literal translation is not so accurate and faithful to the source text, and such concepts should be replaced by more precisely defined terms. In Korea, translation has been relegated to language learning, and a literal translation is still recommended in order to focus on the source language, although it is not possible to translate a totally different Indo-European language following closely the form of it. Furthermore, literary style, so common and frequent in any Indo-European language, aggravates the difficulties, because literal translation of a source language written in literary style usually distorts Korean language and leads to misunderstand correct meanings of the source language. In this paper, I have attempted to expose the problems of literal translation and to make rules of translating Spanish into Korean by using mainly ‘transposition’ and ‘modulation’, terms developed by Vinay and Darbelnet(1958). I hope to apply such rules to the education of Spanish or other foreign languages.