Carbon nanodots (CNDs) are 0D quasi-spherical nanoparticles that are less than 10 nm in size. CNDs that possess surface functional groups such as hydroxyl, amino, and carboxyl groups have been demonstrated to scavenge free radicals efficiently and effectively, resulting in them being beneficial for cosmetic and cosmeceutical applications. In this study, we successfully prepared novel CNDs, namely black VC, using vitamin C (VC) as a promising precursor. Black VC was prepared by a facile one-step method based on short-time microwave irradiation. The properties of black VC were characterized by transmission electron microscopy (TEM) analysis, X-ray diffraction (XRD), high-resolution X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, and UV–vis spectrophotometry. Radical scavenging, cell viability, and anti-pollution activity assays were also conducted to demonstrate the functionalities of black VC. The developed black VC exhibited lower cytotoxicity and better antioxidant, metal chelating ability, and anti-pollution activities than its precursor. These results provide a new approach for developing advanced antioxidants for innovative cosmetic formulations using a simple microwave treatment method. However, black VC retained some problems of its precursor in the form of low stability, which is likely to be a challenge for its cosmeceutical application.

This study evaluated how acid treatment affects the ability of customized beads of activated carbon (BAC) to remove formaldehyde from air. Two different acids (hydrofluoric acid and sulfuric acid) were used to modify the surface of BAC prepared from a polymer material. The acid-modified BACs were further subjected to heat treatment. Physical and chemical characteristics of modified and unmodified BACs were investigated using nitrogen adsorption, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray fluorescence, and X-ray photoelectron spectroscopy. Formaldehyde removal was evaluated under both dry and moist conditions. From the results, acid treatment clearly improved the adsorption performance, especially under the moist condition. Qualitative and quantitative surface analyses were conducted, mainly to examine the amount of O-bonds after acid treatment and the formation of S–O or Cl–O on BAC.

Cyanobacterial resting cells, such as akinetes, are important seed cells for cyanobacteria’s early development and bloom. Due to their importance, various methods have been attempted to isolate resting cells present in the sediment. Ludox is a solution mainly used for cell separation in marine sediments, but finding an accurate method for use in freshwater is difficult. This study compared the two most commonly used Ludox methods (direct sediment treatment and sediment distilled water suspension treatment). Furthermore, we proposed a highly efficient method for isolating cyanobacterial resting cells and eDNA amplification from freshwater sediments. Most of the resting cells found in the sediment were akinete to the Nostocale and were similar to those of Dolichospermum, Cylindrospermum, and Aphanizomenon. Twenty times more akinetes were found in the conical tube column using the sediment that had no treatment than in the sample treated by suspending the sediment in distilled water. Akinete separated through Ludox were mainly spread over the upper and lower layers in the column rather than concentrated at a specific depth in the column layer. The mibC, Geo, and 16S rDNA genes were successfully amplified using the sediment directly in the sample. However, the amplification products of all genes were not found in the sample in which the sediment was suspended in distilled water. Therefore, 5 g to 10 g of sediment is used without pretreatment when isolating cyanobacterial resting cells from freshwater sediment. Cell isolation and gene amplification efficiency are high when four times the volume of Ludox is added. The Ludox treatment method presented in this study isolates cyanobacterial resting cells in freshwater sediment, and the same efficiency may not appear in other biotas. Therefore, to apply Ludox to the separation of other biotas, it is necessary to conduct a pre-experiment to determine the sediment pretreatment method and the water layer where the target organism exists.

The present study focuses on the adsorption of organic matter mainly COD from pretreated landfill leachate of Lamdeng Khunou Solid Waste Management Plant, Manipur, India through the employment of H3PO4 treated activated carbon derived from Parkia speciosa (Petai) pods (PPAC). The adsorbent was analyzed for morphological and surface characterization by various methods including, Field emission scanning electron microscopy (FESEM), Energy Dispersive X-Ray Analysis (EDAX), Brunauer–Emmett–Teller (BET) surface area and pH at zero point charges ( pHZPC). The impacts of adsorption processes such as initial pH, temperature, equilibrium time and dose of adsorbent were considered to evaluate the performance of PPAC. At 20 °C, PPAC showed maximum COD removal of 93% within 90 min contact time, at optimum pH 2. Adsorption kinetic was able to explain by Lagergren’s pseudo-second-order equation and intraparticular diffusion models suggesting the combined behavior of both the physical and chemical adsorption of COD on PPAC. Through thermodynamics and isotherm studies, the adsorption of COD on PPAC is revealed to be exothermic with maximum monolayer coverage of 200 mg COD/g PPAC. The performance of the PPAC adsorbent is also compared with other existing reported adsorbents for treating leachate.

Removing CO2 gas to address the global climate crisis is one of the most urgent agendas. To improve the CO2 adsorption ability of activated carbon, nitrogen plasma surface treatment was conducted. The effect of nitrogen plasma treatment on the surface chemistry and pore geometry of activated carbon was extensively analyzed. The porosity and surface groups of the activated carbon varied with the plasma treatment time. By plasma treatment for a few minutes, the microporosity and surface functionality could be simultaneously controlled. The changed microporosity and nitrogen groups affected the CO2 adsorption capacity and CO2 adsorption selectivity over N2. This simultaneous surface etching and functionalization effect could be achieved with a short operating time and low energy consumption.

실버 페이스트는 상대적으로 낮은 열처리로 공정이 가능하기 때문에 전자 소자 응용분야에서 유용한 전극 재료이다. 본 연구에서는 은 페이스트 전극에 대기압 플라즈마 제트를 이용하여 전극 표면을 처리 했다. 이 플라즈마 제트는 11.5 kHz 작동 주파수에서 5.5 ~ 6.5 kV의 고전압을 사용하여 아르곤 분 위기에서 생성되었다. 플라즈마 제트는 대기압에서 수행함으로써 인쇄 공정에 더 유용할 수 있다. 플라즈 마 처리시간, 인가된 전압, 가스유량에 따라 전극의 표면은 빠르게 친수성화 되었으며 접촉각의 변화가 관 찰되었다. 또한, 대면적 샘플에서 플라즈마 처리 후 접촉각의 편차가 없었는데, 이는 기판의 크기에 관계없 이 균일한 결과를 얻을 수 있었다는 것을 의미한다. 본 연구의 결과는 대면적 전자소자의 제조 및 향후 응 용 분야에서 적층 구조를 형성하는데 매우 유용할 것으로 기대된다.

본 시험은 콩 안정생산 재배법 확립을 위한 Methyl Sulfony Methane (MSM) 시용방법별 생육특성 및 수량을 알아보기 위하여 2020∼2021년에 경상국립대학교 내동 부속농장에서 ‘대원콩’을 국립종자원으로부터 분양받아 수행하였다. 본 시험의 MSM 처리는 2020년에 MSM 시용시기에 따라, 100% 농도로 하여, 기비(BF, basal fertilizaton)+추비1회, 기비+추비2회, 추비1회, 추비2회, 추비3회, 무시용구로 처리하였고, 2021년에는 2020년도에 선발된 시용시기에서의 MSM 시용량에 따라, 기비+추비 50%, 기비+추비 100%, 기비+추비 200%, 추비 50%, 추비 100%, 추비 200%, 무시용구로 설정하였다. 2020년 생육특성 조사에서는 추비시용 전 R1∼2기에 MSM을 기비한 처리구에서 초장, 경태 및 NDVI 값이 높게 나타났고, 2021년 초장에서도 가장 높게 나타났다. 추비시용 후 R6기의 2020년 초장은 무처리구 및 추비1회를 제외한 모든 처리구가, 경태는 추비3회 처리구 및 기비+추비2회 처리구가, Fv/Fm 은 기비+추비2회 처리구가 가장 높았고, 2021년 또한 기비+추비3 200% 처리구에서 초장 97.9cm, 경태 17.2 mm, 분지수 7.44 개, Fv/Fm 값 0.802 로 가장 높은 값이 나타났다. 또한, 수량구성요소는 2년간 MSM 시용의 증가에 따라 주당협수 및 협당립수에서 차이를 보여, 종실수량에서도 2020년에 추비3회 처리구 및 기비+추비2회 처리구가 각각 225, 228 kg·10a-1로 가장 많은 수량이 나타났고, 2021년에는 기비+추비3 200% 처리구에서 382 kg 10a-1로 수량이 가장 많은 것으로 나타났다. 따라서, 2년간의 시험에서 MSM 시용의 증가에 따라 수량도 증가하여, 기비+추비3 200% 처리구에서 최대 21.8%의 증수효과가 나타났다.

To apply UV-C as a non-heating sterilization method to increase the microbiological safety of fresh seedless watermelon products, reductions in E. coli and quality changes by treatment dose (0, 2, 4, 8, 14, 20 kJ/m2) were investigated. The pH, sugar content, and hardness of watermelon inoculated with E. coli were not significantly different according to the UV-C treatment dose, but the polyphenol content was significantly decreased compared to the controls (425.4 GAE μg/g F.W.). When treated with 2 and 4 kJ/m2, the lycopene content was 31.6 and 30.9 μg/g F.W., respectively, which was increased compared to the controls (28.5 μg/g F.W.). The arginine and citrulline content was also significantly increased compared to the controls. The number of E. coli was significantly decreased compared to the controls following UV-C treatment. Considering the degree of E. coli reduction, lycopene content, arginine content, citrulline content, and UV-C irradiation time, subsequent experiments were conducted by selecting a UV-C treatment dose of 2 kJ/m2. The results of confirming the degree of reduction in the number of E. coli colonies by a single treatment and combined treatment with UV-C 2 kJ/m2 and 70% ethanol showed that the combined treatment was most effective as colonies were decreased by 2.3 log CFU/g compared to the controls. Therefore, it is judged that UV-C 2 kJ/m2 radiation and combined treatment with 70% ethanol could be applied as a non-heating sterilization method for fresh watermelon slices.

To improve the safety of tap water, a study was conducted on the introduction of sanitation safety certification system for water treatment plants(WTPs). In order to produce and supply safe tap, the inflow of pollutants should be blocked as much as possible during the tap water production process, and contaminated materials should be removed or inactivated to a safe level in the WTPs. In order to block the inflow of pollutants in WTPs, it is necessary to strengthen the sanitation management such as installation of facilities for preventing inflow and habitat of larvae, and to remove or inactivate pollutants in the tap water production process, strengthening the safety management such as enhanced turbidity management is needed. Sanitation and safety management in the WTPs can be significantly improved by introducing certification system of WTPs. This will induce continuous improvement in water purification plants with insufficient sanitation and safety management, and provide incentives for WTPs with good sanitation and safety management. In addition, when the WTPs sanitation and safety certification system is established, it is desirable to expand the proposed system from WTPs to the entire process of tap water production and supply.

본 논문의 목적은 짜라까 상히따에서 근육조직과 지방조직의 손상에 의한 질병 치료법 연구이다. 아유르베다에서 가르치는 모든 치료법의 목표는 세 도샤의 균형 상태를 유지하 는 데에 있다. 건강은 규정된 질병이 없는 상태를 의미하는 것이 아니라 도샤, 조직 그리고 노폐물이 적절하게 기능적으로 균형을 이룰 때라고 정의한다. 그렇지만 질병의 근원은 이 들이 불균형상태를 말하며 그것의 근본원인은 독소이다. 근육조직은 근육물질을 제공하여 뼈를 지탱하고 활동 기능과 역할이 있다면 지방조직은 지방물질을 제공하며 윤활작용을 하 는 기능과 세포막을 구성하는 역할을 한다. 이러한 근육조직과 지장조직의 손상원인은 지 나치게 음식물을 많이 섭취하거나 또는 적게 섭취하는 경우이다. 그들의 손상에 따른 질병 을 살펴보면 근육조직은 육아종과 근종 등이 있고 지방조직은 당뇨병과 소변질환 등이 있 다. 근육조직과 지방조직의 손상에 의한 질병 치료법으로는 각각 찜질요법과 8가지 바람직 하지 않은 사람에서 찾는다. 먼저 찜질요법의 상당부분은 지난 번 연구에서 다루어졌기 때 문에 그것을 제외한 소개가 안 된 내용만 소개하였다. 지방조직은 비만인 경우와 저체중인 경우로 나누어 단식요법과 영양요법으로 관리를 하면 되지만 이들 요법은 지난번에 연구논 문에서 언급되었기 때문에 자세한 내용을 지난번 연구에 미루고 생략하였다.