Scanning probe microscopy (SPM) has become an indispensable tool in efforts to develop the next generation of nanoelectronic devices, given its achievable nanometer spatial resolution and highly versatile ability to measure a variety of properties. Recently a new scanning probe microscope was developed to overcome the tip degradation problem of the classic SPM. The main advantage of this new method, called Reverse tip sample (RTS) SPM, is that a single tip can be replaced by a chip containing hundreds to thousands of tips. Generally for use in RTS SPM, pyramid-shaped diamond tips are made by molding on a silicon substrate. Combining RTS SPM with Scanning spreading resistance microscopy (SSRM) using the diamond tip offers the potential to perform 3D profiling of semiconductor materials. However, damage frequently occurs to the completed tips because of the complex manufacturing process. In this work, we design, fabricate, and evaluate an RTS tip chip prototype to simplify the complex manufacturing process, prevent tip damage, and shorten manufacturing time.

본 연구의 목적은 비데를 아이템으로 선정해 시니어의 특성과 니즈를 충족시키기 위한 제품기반 서비스디자인을 제안하는데 목표를 두고 진행하였다. 최근 초고령화가 급속히 진행되고 있으나 시니어에 대한 이해가 부족하고, 시 니어를 위한 PSS 개념의 서비스디자인 연구가 미흡한 편이다. 본 연구에서는 4D 더블 다이아몬드 디자인 프로세스 모델을 활용하여 시니어의 특성과 니즈를 반영한 ‘시니어 중심의 비데 제품서비스디자인’ 개선방안을 제안하고자 한다. 연구의 방법은 PSS 개념에 기반하여 ‘4단계 더블 다이아몬드 디자인 프로세스 모델’을 활용하였다. 이를 위해 시니어 대상 질적 리서치를 수행하여 시니어의 특성과 니즈에 따른 사용자 가치 요소를 도출하였으며, 이를 기반으 로 제품서비스 아이디어를 발굴하여 실무 전문가 그룹의 유용성 리뷰를 반영한 프로토타입을 제안하였다. 연구의결과는 첫째, ‘사용자 맞춤 기능 설정 가이드 스마트 앱 서비스’를 제안하였다. 사물인터넷(IoT) 기술을 접목한 비데 와 스마트 폰이 연동되어 사용자 특성 정보와 비데 제품에 대한 정보를 자동으로 해석하여 맞춤 기능을 가이드해주 는 앱 서비스를 제시하였다. 둘째, ‘사용자 중심의 제품서비스 인터페이스’를 적용한 조작부 및 리모컨 UI를 제안하 였다. 시니어의 사용성 및 인지능력을 고려하여 주 기능 중심의 구성과 과업(Task) 순서에 따른 버튼 배치, 터치 화면 형 리모컨 등 단순하고 직관적인 Physical UI를 제안하였다. 셋째, 정기적인 제품 점검뿐만 아니라 사용자 건강 및 사용 공간의 위생, 청결 등 폭넓은 서비스를 제공하는 ‘제품과 헬스/위생 케어가 연계된 비데 케어서비스’를 제안하 였다. 결론적으로 사용자(시니어)의 비데 제품 사용 과정(사용 전-중-후)에서의 페인포인트(Pain Point) 및 요구를 발 견하고 개선하여 사용자 경험과 관계 품질을 향상시킬 수 있는 제품기반 서비스디자인 방법론을 제안하였다.

This paper aims to use a critical discourse analysis (CDA) to analyze types of online news headlines about COVID-19 on cruise ship, the Diamond Princess, and to identify different traits between conservative newspapers and progressive ones. 480 articles were collected from five major news outlets in Korea: Chosun Ilbo, Joongang Ilbo, Donga Ilbo, Hankyoreh, and Kyunghyang Shinmun. The results show that the headlines tend to contain negative or extreme vocabulary and to employ quotes from experts or even from unknown sources in order to criticize Japan and blame the Japanese government for their way of dealing with the situation. In the case of differences between politically biased sources, it was found that the conservative media inclines toward framing negative images of the Japanese government by publishing more articles than the progressive media and by using numbers and statistics to clearly describe the surge of infected people on the ship. They also published more articles than the progressive media about Korea's actions to bring Koreans back home from the ship, framing positive images about the Korean government. As can be seen, the online news headlines are politically biased and manipulatively framed, so readers' discretion is necessary.

Background: The characteristics of lateral epicondylitis (LE) are muscle strength weakness and increased common extensor tendon (CET) thickness. Ultrasonography has recently been used to evaluate tendinopathy. Diamond taping (DT) is commonly used to manage patients with LE. However, no previous studies have investigated the effects of DT on CET thickness. Objects: The aim of this study was to investigate the effects of DT applied around the lateral elbow on CET thickness, grip strength, and wrist extension force in healthy subjects. Methods: The subjects were 26 adults (13 male) in their twenties. First, the CET thickness was measured at rest. The CET thickness was measured by using ultrasonography at two points. The subjects were then instructed to perform maximal grip activities or maximal wrist extension activities before and after DT around the lateral elbow. The DT technique was applied using non-elastic tape. While the subjects performed maximal grip activities, the investigator measured the maximum grip strength (MGS) and CET thickness. Likewise, while the subjects performed maximal wrist extension activities, the investigator measured the maximum wrist extension force (MWEF) and CET thickness. Results: The MGS showed a statistically significant improvement after DT taping application in men (p < 0.05). The MWEF showed a statistically significant improvement after DT application in male (p < 0.01) and female (p < 0.05). When performing the activities, the CET thickness increased compared to that at rest. However, CET thickness didn’t show a statistically significant improvement before and after DT. Conclusion: This study shows that DT applied around the lateral elbow is effective in improving MGS and MWEF. However, it does not affect CET thickness.

Background: Lateral epicondylitis (LE) is the most common chronic musculoskeletal pain condition of the upper extremities. LE is often related to forceful grip activities that require isometric contraction of the wrist extensors. A previous study evaluated the effect of the diamond taping technique on grip strength and pain; however, there has been no report on the change in the electromyography (EMG) findings of wrist extensors. Objects: The aim of this study was to investigate the effect of diamond taping technique, using a rigid tape, on the EMG activities of the extensor carpi radialis (ECR) during grip activities. Methods: Twenty-four healthy subjects (mean age = 21.50 ± 2.76 years) volunteered to participate in this study. The subjects were instructed to perform forceful grip activities with and without diamond-type taping on the origin area of the ECR. Grip strength tests were performed at 100%, 75%, 50%, and 25% for maximal isometric contraction force. EMG data were collected from the ECR. Repeated measure analysis of variance was used to analyze the effect of grip force and taping (with and without). Statistical significance levels were set at α = 0.05. Comparison of the results with and without taping at different grip force were analyzed using independent t-test. Statistical significance levels were set at α = 0.01. Results: Statistically significant association was observed between the taping application and forceful grip activity as revealed by the EMG data of the ECR (p < 0.05). EMG of the ECR significantly reduced for all muscle strength levels (p < 0.01) after taping. Conclusion: This study shows an impressive effect of the diamond taping technique, using rigid tape, on wrist extensors during grip activities. Decreasing muscle activity via this taping approach could be utilized to enhance pain-free grip force and reduce pain in patients with LE. Our study suggested that this taping technique could be considered as an effective management strategy of LE.

For diamond/metal composites it is better to use diamond particles coated with metal carbide because of improved wettability between the diamond particles and the matrix. In this study, the coating of diamond particles with a chromium carbide layer is investigated. On heating diamond and chromium powders at 800~900 oC in molten salts of LiCl, KCl, CaCl2, the diamond particles are coated with Cr7C3. The surfaces of the diamond powders are analyzed using X-ray diffraction and scanning electron microscopy. The average thickness of the Cr7C3 coating layers is calculated from the result of the particle size analysis. By using the molten salt method, the Cr7C3 coating layer is uniformly formed on the diamond particles at a relatively low temperature at which the graphitization of the diamond particles is avoided. Treatment temperatures are lower than those in the previously proposed methods. The coated layer is thickened with an increase in heating temperature up to 900 oC. The coating reaction of the diamond particles with chromium carbide is much more rapid in LiCl-KCl-CaCl2 molten salts than with the molten salts of KCl-CaCl2.

A boron-doped diamond(BDD) electrode is attractive for many electrochemical applications due to its distinctive properties: an extremely wide potential window in aqueous and non-aqueous electrolytes, a very low and stable background current and a high resistance to surface fouling. An Ar gas mixture of H2, CH4 and trimethylboron (TMB, 0.1 % C3H9B in H2) is used in a hot filament chemical vapor deposition(HFCVD) reactor. The effect of argon addition on quality, structure and electrochemical property is investigated by scanning electron microscope(SEM), X-ray diffraction(XRD) and cyclic voltammetry(CV). In this study, BDD electrodes are manufactured using different Ar/CH4 ratios (Ar/CH4 = 0, 1, 2 and 4). The results of this study show that the diamond grain size decreases with increasing Ar/CH4 ratios. On the other hand, the samples with an Ar/CH4 ratio above 5 fail to produce a BDD electrode. In addition, the BDD electrodes manufactured by introducing different Ar/CH4 ratios result in the most inclined to (111) preferential growth when the Ar/CH4 ratio is 2. It is also noted that the electrochemical properties of the BDD electrode improve with the process of adding argon.

Boron-doped diamond (BDD) electrode has an extremely wide potential window in aqueous and non-aqueous electrolytes, very low and stable background current and high resistance to surface fouling due to weak adsorption. These features endow the BDD electrode with potentially wide electrochemical applications, in such areas as wastewater treatment, electrosynthesis and electrochemical sensors. In this study, the characteristics of the BDD electrode were examined by scanning electron microscopy (SEM) and evaluated by accelerated life test. The effects of manufacturing conditions on the BDD electrode were determined and remedies for negative effects were noted in order to improve the electrode lifetime in wastewater treatment. The lifetime of the BDD electrode was influenced by manufacturing conditions, such as surface roughness, seeding method and rate of introduction of gases into the reaction chamber. The results of this study showed that BDD electrodes manufactured using sanding media of different sizes resulted in the most effective electrode lifetime when the particle size of alumina used was from 75~106 μm (#150). Ultrasonic treatment was found to be more effective than polishing treatment in the test of seeding processes. In addition to this, BDD electrodes manufactured by introducing gases at different rates resulted in the most effective electrode lifetime when the introduced gas had a composition of hydrogen gas 94.5 vol.% carbon source gas 1.6 vol.% and boron source gas 3.9 vol.%.

This study investigates the thermal shock property of a polycrystalline diamond compact (PDC) produced by a high-pressure, high-temperature (HPHT) sintering process. Three kinds of PDCs are manufactured by the HPHT sintering process using different particle sizes of the initial diamond powders: 8-16 μm (D50 = 4.3 μm), 10-20 μm (D50 = 6.92 μm), and 12-22 μm (D50 = 8.94 μm). The microstructure observation results for the manufactured PDCs reveal that elemental Co and W are present along the interface of the diamond particles. The fractions of Co and WC in the PDC increase as the initial particle size decreases. The manufactured PDCs are subjected to thermal shock tests at two temperatures of 780oC and 830oC. The results reveal that the PDC with a smaller particle size of diamond easily produces microscale thermal cracks. This is mainly because of the abundant presence of Co and WC phases along the diamond interface and the easy formation of Co-based (CoO, Co3O4) and W-based (WO2) oxides in the PDC using smaller diamond particles. The microstructural factors for controlling the thermal shock property of PDC material are also discussed.

This study investigated the microstructure and wear resistance property of HPHT (high pressure high temperature) sintered PDC (polycrystalline diamond compact) in accordance with initial molding pressure. After quantifying an identical amount of diamond powder, the powder was inserted in top of WC-Co sintered material, and molded under four different pressure conditions (50, 100, 150, 200 kgf/cm2). The obtained diamond compact underwent sintering in high pressure, high temperature conditions. In the case of the 50 kgf/cm2 initial molding pressure condition, cracks were formed on the surface of PDC. On the other hand, PDCs obtained from 100~200 kgf/cm2 initial molding pressure conditions showed a meticulous structure. As molding pressure increased, low Co composition within PDC was detected. A wear resistance test was performed on the PDC, and the 200 kgf/cm2 condition PDC showed the highest wear resistance property.

The optical film for light luminance improvement of back light unit that is used in light emitting diode/liquid crystal display and retro-reflective film is used as luminous sign consist of square and triangular pyramid structure pattern based on V-shape micro prism pattern. In this study, we analyzed machining characteristics of Cu-plated flat mold by shaping with diamond tool. First, cutting conditions were optimized as V-groove machining for the experiment of micro prism structure mold machining with prism pattern shape, cutting force and roughness. Second, the micro prism structure such as square and triangular pyramid pattern were machined by cross machining method with optimizing cutting conditions. Variation of Burr and chip shape were discussed by material properties and machining method.

The monolayer engineering diamond particles are aligned on the oxygen free Cu plates with electroless Ni plating layer. The mean diamond particle sizes of 15, 23 and 50 μm are used as thermal conductivity pathway for fabricating metal/carbon multi-layer composite material systems. Interconnected void structure of irregular shaped diamond particles allow dense electroless Ni plating layer on Cu plate and fixing them with 37-43% Ni thickness of their mean diameter. The thermal conductivity decrease with increasing measurement temperature up to 150oC in all diamond size conditions. When the diamond particle size is increased from 15 μm to 50 μm (Max. 304 W/mK at room temperature) tended to increase thermal conductivity, because the volume fraction of diamond is increased inside plating layer.

This study investigates the microstructure and thermal shock properties of polycrystalline diamond compact (PDC) produced by the high-temperature, high-pressure (HPHT) process. The diamond used for the investigation features a 12~22 μm- and 8~16 μm-sized main particles, and 1~2 μm-sized filler particles. The filler particle ratio is adjusted up to 5~31% to produce a mixed particle, and then the tap density is measured. The measurement finds that as the filler particle ratio increases, the tap density value continuously increases, but at 23% or greater, it reduces by a small margin. The mixed particle described above undergoes an HPHT sintering process. Observation of PDC microstructures reveals that the filler particle ratio with high tap density value increases direct bonding among diamond particles, Co distribution becomes even, and the Co and W fraction also decreases. The produced PDC undergoes thermal shock tests with two temperature conditions of 820 and 830, and the results reveals that PDC with smaller filler particle ratio and low tap density value easily produces cracks, while PDC with high tap density value that contributes in increased direct bonding along with the higher diamond content results in improved thermal shock properties.

In this study, in order to increase surface ability of hardness and corrosion of magnesium alloy, anodizingand sealing with nano-diamond powder was conducted. A porous oxide layer on the magnesium alloy was successfullymade at 85℃ through anodizing. It was found to be significantly more difficult to make a porous oxide layer in themagnesium alloy compared to an aluminum alloy. The oxide layer made below 73℃ by anodizing had no porous layer.The electrolyte used in this study is DOW 17 solution. The surface morphology of the magnesium oxide layer wasinvestigated by a scanning electron microscope. The pores made by anodizing were sealed by water and aqueous nano-diamond powder respectively. The hardness and corrosion resistance of the magnesium alloy was increased by the anod-izing and sealing treatment with nano-diamond powder.

In this study, an aluminum oxide layer for sealing treatment of nano-diamond powder was synthesized byanodizing under constant current. The produced pore size and oxide thickness were investigated using scanning electronmicroscopy. The pore size increased as the treatment time increased, current density increased, sulfuric acid concentra-tion decreased, which is different from the results under constant voltage, due to a dissolution of the oxide layers. Theoxide layer thickness by the anodizing increased as temperature, time, and current density increased. The results of thisstudy can be applied to optimize the sealing treatment process of nano-diamond particles of 4-10 nm to enhance theresistances of corrosion and wear of the matrix.

In the present work, physicochemical treatments were introduced for de-aggregation and stable dispersion of detonation nanodiamonds (DND) in polar solvents. The DNDs in water exhibited a particle size of 138 nm and high dispersion stability without particular treatment. However, the DNDs in ethanol were severely aggregated to several micrometers in size and showed poor dispersion stability with time. To break down aggregates of DNDs and enhance the dispersion stability of them in ethanol, mechanical force and chemical surfactant were introduced as functions of zirconia ball size, kind of surfactant and amount of surfactant added. From the analyses of average particle size and Turbiscan results, it was suggested that the size of DNDs in ethanol can be reduced by only mechanical force; however, the DNDs were re-aggregated due to high surface activity. The long-term dispersion stability can be achieved by applying mechanical force to break down the aggregates of DNDs and by preventing re-aggregation of them using proper surfactant.

Micro trench structures are applied in gratings, security films, wave guides, and micro fluidics. These micro trench structures have commonly been fabricated by micro electro mechanical system (MEMS) process. However, if the micro trench structures are machined using a diamond tool on large area plate, the resulting process is the most effective man- ufacturing method for products with high quality surfaces and outstanding optical characteristics. A nonferrous metal has been used as a workpiece; recently, and hybrid materials, including polymer materials, have been applied to mold for display fields. Thus, the machining characteristics of polymer materials should be analyzed. In this study, machining characteristics were compared between nonferrous metals and polymer materials using single crystal diamond (SCD) tools; the use of such materials is increasing in machining applications. The experiment was conducted using a square type diamond tool and a shaper machine tool with cutting depths of 2, 4, 6 and 10 µm and a cutting speed of 200 mm/s. The machined surfaces, chip, and cutting force were compared through the experiment.

Mirror surface machining for large area flattening in the display field has a problem such as a tool wear and a increase in machining time due to large area machining. It should be studied to decrease machining time and tool wear. In this paper, multi-tool machining method using a PCD tool and a SCD tool was applied in order to decrease machining time and tool wear. Machining characteristics (cutting force, machined surface and surface roughness) of PCD tool and SCD tool were evaluated in order to apply PCD tool to flattening machining. Based on basic experi- ments, the PCD/SCD multi-tool method and the SCD single-tool method were compared through surface roughness and machining time for appllying large area mold machining.