Yttria-stabilized zirconia (YSZ) has a low thermal conductivity, high thermal expansion coefficient, and excellent mechanical properties; thus, it is used as a thermal barrier coating material for gas turbines. However, during long-time exposure of YSZ to temperatures of 1200oC or higher, a phase transformation accompanied by a volume change occurs, causing the YSZ coating layer to peel off. To solve this problem, YSZ has been doped with trivalent and tetravalent oxides to obtain coating materials with low thermal conductivity and suppressed phase transformation of zirconia. In this study, YSZ is doped with trivalent oxides, Nd2O3, Yb2O3, Al2O3, and tetravalent oxide, TiO2, and the thermal conductivity of the obtained materials is analyzed according to the composition; furthermore, the relative density change, microstructure change, and m-phase formation behavior are analyzed during long-time heat treatment at high temperatures.

대표적인 짚공예 가운데 하나인 맥간공예(혹은 보릿대 조각공예)는 표면이 매끄럽고 광택이 나는 보릿대를 활용하고 있으며 최근에 국내뿐 아니라 해외로 전파되고 있다. 보릿대 표면의 줄기 방향과 나란한 미세 줄무늬는 맥간공예 작품에 입체감과 각도에 따른 색감을 갖게 한다. 하지만 아직까지 보릿대 표면의 형상과 물성이 체계적으로 분석되지 않은 실정이다. 본 연구에서는 고해상도 실체현미경과 고해상도 3차원 X-ray 현미경을 이용하여 보릿대의 미세구조를 이미징할 뿐만 아니라 보릿대의 물접촉각과 인장 강도를 측정하여 보릿대의 재질을 분석하였다. 이를 통해 보릿대 최외각에 존재하는 4-6 μm 너비의 미세요철에 의한 줄무늬, 소수성을 띈 겉면, 친수성을 띈 속면, 그리고 60 MPa 정도의 줄기 방향의 항복강도를 갖는 보릿대 특성을 확인하였다. 본 연구에서 제시한 분석 방법으로 볏짚을 비롯한 다른 짚공예에 사용되는 짚 재료의 특성을 파악한다면 짚의 재질을 최대로 활용한 새로운 짚공예로 이어질 것이다.

본 논문은 에너지를 실시간으로 저장할 수 있는 저장장치 중 열에너지 저장 콘크리트를 대상으로 재료의 미세구조와 물성(열전도 도)의 상관관계를 분석하는 연구를 수행하였다. 에너지 저장 콘크리트의 열전도 성능을 증가시키기 위해 혼화재인 그라파이트 (graphite)를 사용하였다. 그라파이트가 시멘트 질량의 10%와 15%를 치환한 시편과 일반 콘크리트(OPC) 시편을 제작하여 그라파이 트의 혼입에 따른 미세구조 변화 및 열전도도의 영향을 마이크로 스케일에서 분석하였다. 마이크로-CT를 활용하여 OPC와 그라파이 트를 사용한 콘크리트의 공극률을 비교하였으며, 확률함수를 사용하여 미세구조 특성을 정량화하였다. 미세구조 특성 차이가 열전도 도에 미치는 영향을 확인하기 위해 3차원 가상 시편을 제작하여 열해석을 수행하였으며, 이를 열평판법을 사용하여 측정한 열전도도 실험 결과와 비교하였다. 열해석 수행 시 그라파이트 재료가 지닌 열전도도 성능을 반영하기 위하여 해석 결과와 실험 결과를 기반으 로 고체상의 열전도도를 역해석을 통해 계산하였으며, 그라파이트가 시편의 열전도도에 미치는 영향에 대해 분석하였다.

PURPOSES : In this study, an ASR-reducing (alkali-silica reaction) cement was developed to prevent the blow-up of concrete pavements. To develop ASR-reducing cement, various amounts of ground granulated blast furnace slag (GGBFS), and fly ash (FA) were substituted with Portland cement, and the ASR reduction effect was verified through various experiments. METHODS : The physical properties of ASR-reducing cement, varying with the substitution amounts of GGBFS and FA, were verified through compressive strength tests. In addition, the ASR reduction effect was examined using accelerated mortar bar tests. Furthermore, the reasons for the ASR reduction were investigated using microstructural analysis techniques, such as XRD and TG/DTG. RESULTS : There was a difference in the compressive strength results according to the amount of GGBFS and FA substitution. In addition, the samples with GGBFS and FA exhibited relatively lower compressive strengths at 3 days, than OPC samples, but the compressive strength at 28 days was higher than that of the OPC samples. The samples with GGBFS and FA had higher compressive strength at 28 days than OPC samples, because the substituted GGBFS and FA induced pozzolanic reaction. Through XRD and TG/DTG analyses, various degrees of pozzolanic reaction occurring in the samples were examined, and a more active pozzolanic reaction occurred in the samples with FA than in the samples with GGBFS. Therefore, it appeared that the ASR reduction effect occurred because of the induced pozzolanic reaction. CONCLUSIONS : GGBFS and FA substituting Portland cement indicated an ASR reduction effect, which was owing to the pozzolanic reaction. In addition, FA indicated a greater ASR reduction effect than GGBFS, which suggested that FA induced a more active pozzolanic reaction than GGBFS.

This study analyzes the mechanical properties, including the attrition rate, of 50 μm size yttria-stabilized zirconia (YSZ) beads with different microstructures and high-energy milling conditions. The yttria distribution in the grain and grainboundary of the fully sintered beads relates closely to Vickers hardness and the attrition rate of the YSZ beads. Grain size, fractured surfaces, and yttrium distribution are analyzed by electronic microscopes. For standardization and a reliable comparison of the attrition rate of zirconia beads with different conditions, Zr content in milled ceramic powder is analyzed and calculated by X-ray Fluorescence Spectrometer(XRF) instead of directly measuring the weight change of milled YSZ beads. The beads with small grain sizes sintered at lower temperature exhibit a higher Vickers hardness and lower attrition rate. The attrition rate of 50 μm YSZ beads is measured and compared with the various materials properties of ceramic powders used for high-energy milling. The attrition rate of beads appears to be closely related to the Vickers hardness of ceramic materials used for milling, and demonstrates more than a 10 times higher attrition rate with Alumina(Hv ~1650) powder than BaTiO3 powder (Hv ~315).

Particle size reduction is an important step in many technological operations. The process itself is defined as the mechanical breakdown of solids into smaller particles to increase the surface area and induce defects in solids, which are needed for subsequent operations such as chemical reactions. To fabricate nano-sized particles, several tens to hundreds of micron size ceramic beads, formed through high energy milling process, are required. To minimize the contamination effects during highenergy milling, the mechanical properties of zirconia beads are very important. Generally, the mechanical properties of Y2O3 stabilized tetragonal zirconia beads are closely related to the mechanism of phase change from tetragonal to monoclinic phase via external mechanical forces. Therefore, Y2O3 distribution in the sintered zirconia beads must also be closely related with the mechanical properties of the beads. In this work, commercially available 100μm-size beads are analyzed from the point of view of microstructure, composition homogeneity (especially for Y2O3), mechanical properties, and attrition rate.

최근 지구온난화의 진행에 따라 꽃가루 피해가 증가하고 있다. 특히 꽃가루 알레르기의 경우, 피부병과 비염의피해가 심각한 것으로 알려져 있다. 그러나, 꽃가루 피해의 대비책은 미비한 상태이다. 이에 꽃가루 피해를 근본적인측면에서 해결하는 방안을 모색하게 되었다. 우리는 1억여 년간 수분을 매개하며 수분에 특화된 털을 가지게 된꽃가루 매개충에 착안하였고, 이전에 연구된 사례가 없다는 점을 염두에 두어 다음 네 실험을 진행하였다. ‘실험Ⅰ’에서는 채집한 6종의 꽃가루 매개충별 꽃가루 흡착도를 비교하였고, ‘실험 Ⅱ-1’, ‘실험 Ⅱ-2’, ‘실험 Ⅱ-3’에서는미세 털 구조에 관한 3D 모델을 제작한 후 꽃가루 흡착도가 높거나 독특한 털 구조를 보이는 종들의 특징을 규명하고자하였다. 그 결과 실험한 6종 중 참뒤영벌(Bombus opulentus Smith)이 가장 높은 꽃가루 흡착도를 가지며, 꽃가루흡착도가 높은 종들이 나뭇가지 꼴의 특수한 털 구조를 가진다는 사실을 알아낼 수 있었다. 우리는 위에서 이해한미세 털 구조를 마스크, 방충망에 적용하여 꽃가루 문제를 해결하고자 한다.

입자 복합재료는 입자의 형상, 크기 그리고 분포의 산포특성으로 인해 물성치의 편차가 존재하고, 입자 복합재료를 사용 한 시스템의 거동 또한 산포가 존재한다. 하지만 입자의 산포특성을 고려하기 어려우므로 균질화법을 사용하여 시스템의 거 동을 해석하거나 국부영역에서 미세구조를 적용하여 해석한다. 본 연구에서는 입자의 랜덤적 산포특성을 고려하기 위해 RMDFs(random morphology description functions)를 사용하여 랜덤 미세구조를 생성하였고, 단면 1차 모멘트를 사용하여 가우시안 함수의 수(N)와 입자의 산포특성의 관계를 분석하였다. 그리고 랜덤 미세구조 구조물의 거동을 분석하기 위하여 랜덤 미세구조를 전체에 반영한 외팔보에 multi-scale 해석을 수행하였다. 그 결과 입자의 산포특성과 외팔보의 처짐의 편차 는 N의 증가에 따라 감소하고 N=200에서 수렴하는 것을 확인하였다.

OBJECTIVES : In this study, microstructural components of crumb rubber modified asphalt (CRMA) binder were investigated using environmental scanning electron microscope (ESEM). To clearly understand the elemental composition of the CRMA binder, energy dispersive X-ray spectroscopy (EDX) was employed on the ESEM samples. METHODS: CRMA binders were produced using open blade mixers at 177℃ for 30 min. The binders were artificially aged through a series of accelerated aging processes. Sample preparation was done by making a mold shape on the glass slide. Thereafter, the morphology of the CRMA binder was observed using the ESEM coupled with the EDX. RESULTS : The images captured from the ESEM indicate that the unaged CRMA binder appears to have a single-phase continuous nonuniform structure after the addition of crumb rubber particles, whereas the artificially aged CRMA binder was observed to have two different phases. ESEM coupled with EDX shows detailed internal structure of the modified binders compared to other technologies (i.e., optical microscopy, atomic force microscopy, and conventional scanning electron microscope). CONCLUSIONS: The captured images resemble the internal structures such as the viscous properties of the unaged CRMA binder and the interaction between the rubber particles and the base binder at aged condition. ESEM is a powerful instrument and with the introduction of EDX, it provided more details of the network microstructure of the asphalt binder. ESEM coupled with EDX is recommended for use in future investigation of microstructure of asphalt binders.

NiO catalysts were successfully coated onto FeCrAl metal alloy foam as a catalyst support via a dip-coating method. To demonstrate the optimum amount of NiO catalyst on the FeCrAl metal alloy foam, the molar concentration of the Ni precursor in a coating solution was controlled, with five different amounts of 0.4 M, 0.6 M, 0.8 M, 1.0 M, and 1.2 M for a dip-coating process. The structural, morphological, and chemical bonding properties of the NiO-catalyst-coated FeCrAl metal alloy foam samples were assessed by means of field-emission scanning electron microscopy(FESEM), scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS), X-ray diffraction(XRD), and X-ray photoelectron spectroscopy(XPS). In particular, when the FeCrAl metal alloy foam samples were coated using a coating solution with a 0.8 M Ni precursor, well-dispersed NiO catalysts on the FeCrAl metal alloy foam compared to the other samples were confirmed. Also, the XPS results exhibited the chemical bonding states of the NiO phases and the FeCrAl metal alloy foam. The results showed that a dip-coating method is one of best ways to coat well-dispersed NiO catalysts onto FeCrAl metal alloy foam.

As a growth-template of ZnO nanorods (NR), a hexagonal β-Ni(OH)2 nanosheet (NS) was synthesized with the low temperature hydrothermal process and its microstructure was investigated using a high resolution scanning electron microscope and transmission electron microscope. Zinc nitrate hexahydrate was hydrolyzed by hexamethylenetetramine with the same mole ratio and various temperatures, growth times and total concentrations. The optimum hydrothermal processing condition for the best crystallinity of hexagonal β-Ni(OH)2 NS was determined to be with 3.5 mM at 95˚C for 2 h. The prepared Ni(OH)2 NSs were two dimensionally arrayed on a substrate using an air-water interface tapping method, and the quality of the array was evaluated using an X-ray diffractometer. Because of the similarity of the lattice parameter of the (0001) plane between ZnO (wurzite a = 0.325 nm, c = 0.521 nm) and hexagonal β-Ni(OH)2 (brucite a = 0.313 nm, c = 0.461 nm) on the synthesized hexagonal β-Ni(OH)2 NS, ZnO NRs were successfully grown without seeds. At 35 mM of divalent Zn ion, the entire hexagonal β-Ni(OH)2 NSs were covered with ZnO NRs, and this result implies the possibility that ZnO NR can be grown epitaxially on hexagonal β-Ni(OH)2 NS by a soluble process. After the thermal annealing process, β-Ni(OH)2 changed into NiO, which has the property of a p-type semiconductor, and then ZnO and NiO formed a p-n junction for a large area light emitting diode.

A hierarchical computational method has been developed and used with finite element method based on dislocation density multiple-slip crystalline formulation to predict how nanoindentation affects behavior in face-centered cubic crystalline aggregates. Using displacement profiles which were obtained from molecular dynamics(MD) nanoindentation simulation, scaling relations based on indentation depths, grain-sizes, and grain aggregate distributions were obtained. These relations then applied to coarsen grains in micros- tructurally based FE formulation which accounts for dislocation density evolution, crystalline structures. This computational regime was validated with a several experimental results related to single gold crystals. This hierarchical model provides a tool to link nanosacle level with a microstructurally based FEM formulation that can be to ascertain inelastic effects such as dislocation density evolution. With the above certainty temperature distribution during the nanoindentation simulation also was investigated along with the different indentation depth.

공극구조 분석 방법은 ASTM C 457의 리니어트레버스 포인트카운트법이 있으나, 이러한 방법들은 분석하는데 시간과 노력이 너무 많이 소요되어 현재에는 거의 사용되어지지 않고 있다. 근래에는 현미경과 디지털 카메라, 컴퓨터의 프로그램 발달로 화상분석법이 많은 연구자에 의해 연구되고 있다. 본 연구에서는 화상분석법을 통하여 라텍스개질 콘크리트의 공극 구조 특성을 분석하고자 시멘트 종류(보통포틀랜드시멘트, 초속경시멘트)와 라텍스 혼입율(0,15%)에 따라 실험을 수행하였다. 실험결과, 라텍스는 경화 후 콘크리트에서 AE제의 공기연행효과보다 더 우수한 연행공기 량을 갖는 것으로 나타났다. 또한, 화상분석법을 이용할 경우 경화 후 콘크리트 내부 공극 구조에 대한 다양한 정보를 분석할 수 있을 것으로 판단되었다.

MBS에 의해(001)GaAs기판 위에 성장된 Zn1-xCoxSe(x=1.0, 7.4, 9.5 %)반도체 박막과 (ZnSe/FeSe)반도체 초격자 박막의 미세구조를 투과전자현미경을 이용하여 연구하였다. Zn1-xCoxSe 박막 시편의 경우, 박막과 기판 사이의 격자 불일치때문에 a/2<110>형태의 버거즈 벡터를 가지는 부정합 전위를 관찰하였다. 모든 Zn1-xCoxSe 박막과 기판의 계면은 뚜렷이 구별되었고, 계면에서 산화물이나 이물질이 존재하지 않았다. 또한, (ZnSe/FeSe)초격자를 성장시키기 전에 GaAs기판 위에 ZnSe바닥층을 넣음으로써 고품질의 (ZnSe/FeSe)초격자를 얻었다. (ZnSe/FeSe)초격자에 있는 FeSe는 섬아연광 결정구조로 존재하였다.