산업화와 도시화의 급속한 발전으로 교통량이 증가하면서, 도로 비산먼지와 같은 대기 오염 문제가 심각해지고 있다. 특히, 도로에 서 발생하는 미세먼지의 주요 원인인 비배기가스의 일환인 도로 비산먼지(Road suspended dust)는 대기 질을 저하시킬 뿐만 아니라, 인 체 건강에도 여러 가지 해로운 영향을 미친다. 이에 비산먼지 예측 모형식을 개발하기 위해 도심부 도로 내 비산먼지 측정차량을 운 영하고 있으나, 측정 시 주변 환경에 영향을 많이 미치기 때문에 보다 신뢰성 있는 결과를 위해서는 앞차에서 발생하는 배기가스 영 향권을 최소화하여 노면-타이어에서 발생하는 순수 비산먼지 농도를 측정할 필요가 있다. 따라서 본 연구의 목적은 차량의 주행 패턴 에 따라 도로 비산먼지 농도가 어떻게 변화하는지를 분석하고, 거리별 배기가스의 영향력을 평가하고자 하였다. 먼저, 이동식 비산먼지 측정차량을 활용하여 측정차량을 기준으로 차량 간의 거리(10m, 20m, 50m)와 도심부에서 발생할 수 있는 대표 적인 주행행태(전방 2대 직진, 전방 2대 평행, 전방 3대 직진)에 따른 도로 비산먼지 농도의 변화를 측정하였다. 실험 결과, 차량 간 거리가 가까운 10m일 때 비산먼지 농도가 가장 높았으며, 이 때의 농도는 20m 또는 50m 거리에서 측정된 농도보다 유의미하게 증가 하는 경향을 보였다. 특히, 20m 거리에서는 비산먼지 농도가 낮아지는 경향이 뚜렷하였으며, 이는 차량의 배기가스가 도로에서 발생하 는 비산먼지에 미치는 영향이 줄어드는 것을 나타낸다. 또한 전방에 3대의 차량이 직진으로 주행할 경우 앞차량에 의해 비산된 먼지 가 계속 공기중으로 비산되어 측정차량에서는 낮게 나타나는 것으로 분석되었다. 이러한 결과는 도시 내에서 비산먼지에 기반한 안전 거리를 설정하는 데 중요한 기초 자료로 활용될 수 있으며, 측정차량 운영 시 앞차에서 발생하는 배기가스의 영향을 최소화하여 비산 먼지 농도만을 측정할 수 있는 자료로 활용될 수 있다. 본 연구는 배기가스가 도로 비산먼지 농도에 미치는 영향을 실증적으로 분석함으로써, 대기질 개선을 위한 보다 효과적인 정책 수립 에 기여할 것으로 기대된다. 궁극적으로, 도심부 도로 내 도로 비산먼지에 대한 영향을 고려할 때 배기가스에 따른 농도 변화를 이해 함으로써, 향후 도시 환경에서의 지속 가능한 교통 관리와 대기질 개선 전략을 개발하는 데 중요한 기초 자료가 될 것으로 판단된다.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. Following the development of the existing high-performance heater, burner structure capable of maintaining ignition state in exhaust flow, pulsation generated by diesel engines, and exhaust flow control unit, the actual configuration, function and effect of the device, development contents, basic data and abnormalities of the vehicle, and comparison with other developed products.

The research aimed to develop a high-efficiency plate-type heat exchanger for exhaust gas using computational fluid dynamics (CFD) thermal analysis based on the plate shape, and to identify the optimal shape. Following this, a water/air plate heat exchanger was manufactured, and its characteristics were studied experimentally. As the Re number increases on the gas (or air) side, the heat transfer rate increases significantly, whereas an increase in the Re number on the water side leads to a smaller increase in heat transfer. This is attributed to the larger convective heat resistance on the gas side, causing a substantial reduction in gas-side heat resistance as gas velocity increases, resulting in a considerable overall reduction in heat resistance. The fluid flow pressure drop showed similar results between the CFD calculations and experimental outcomes.

In this study, a condensate drain valve was newly installed in the steam inlet pipe line of the soot blower to reduce the amount of condensate contained in the steam for the soot blower. When the economizer is inactive, the condensate drain valve on the soot blower steam inlet pipe line is always opened to drain the condensate. It is intended to reduce environmental pollution and improve economizer performance by reducing the water hammer that inevitably occurs in facilities using steam, and reducing the amount of condensate water generated during the shutdown of the soot blower and the release of soot containing condensate water into the atmosphere when removing soot.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop an exhaust flow control unit suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

ars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed an optimized system for complete combustion of smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop a burner structure in a smoke reduction device suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low-temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

본 연구는 국내 항구도시 인천, 목포, 광양, 부산, 울산의 대기오염물질 배출특성, 대형선박 배기가스 배출량 및 사회적 비 용을 산정하여 배출가스 저감방안의 필요성을 제시하였다. 부산은 선박 입항수가 많고 목포는 선박 입항수는 적지만 선박 배기가스에 의한 배출기여도는 두 항구도시 모두 높았다. 울산은 세계적 수준의 중화학공업, 광양은 제철소, 인천은 제조업과 선박 입항수가 목포 보다 많았지만 배출기여도는 낮았다. 선박 배기가스 배출량 산정 결과, CO2의 배출량이 가장 많고 다음으로는 NOx, SOx으로 배출량이 많았다. 선종별로는 부산, 울산, 인천은 유조선, 광양은 일반화물선, 목포는 여객선에서 각각 많았다. 사회적 비용 결과, 부산은 배출량 이 많은 영향으로 사회적 비용이 높았으며, 항목별로는 PM이 높았다. 저황유 사용으로 PM, SOx 배출량을 직접적으로 줄이고, NOx의 배출량을 간접적으로 줄 일수 있다. 하지만 선박 배기가스 중 가장 많은 배출량을 보인 CO2를 저감하기 위해서는 저황유의 보급만으 로는 부족하다. CO2 배출량 감축을 위해서는 육상전원공급장치(Alternative Maritime Power)를 사용하는 등 화석연료를 사용하지 않는 저 감방안 수립의 필요성을 제기하였다.

L.P SCR의 촉매 반응을 위해 선박의 발전기용 4행정 디젤엔진의 배기가스 온도를 높게 설계 할 수밖에 없었다. 본 연구의 목적은 밸브개폐시기와 연료분사시기를 조정을 통한 배기가스의 온도 감소가 L.P SCR의 운전조건을 만족시키고 고온으로 인한 발전기 엔진의 사고를 예방하기 위함이었다. 배기가스 온도를 하강시키기 위해 캠샤프트의 각도를 조정하고 연료분사펌프의 Shim을 추가하였다. 그 결과 최대폭발압력은 12.8 bar 증가하였고 터보차저 출구온도 평균값은 13.3 ℃ 하강하였다. 터보차저 출구에서 SCR 입구까지의 열손실을 감안하더라도 L.P SCR 운전조건인 SCR 챔버 입구 온도인 290 ℃를 만족하였다. 배기가스 온도 하강을 통해 디젤발전기의 안전운전이 가능하게 한 연구였다.

In this paper, we compare and analyze the injector defects of P-ENG and S-ENG with normal injectors by measuring current waveforms, voltage waveforms, exhaust gases and driving fuel economy. In the case of FTS failure, the S-ENG reduced the overall injection time by 3.7% and the main injection by 3.5% compared to the normal engines. In the case of AFS failure, the overall injection time increased by 45.7% and the main injection time increased by 24.1% compared to the normal engine. The rest data showed that fuel economy of S-ENG had 25.9% higher than P-ENG, NOX had 162.5% higher than that of P-ENG, and CO2 of S-ENG had 26.7% lower than P-ENG.

Numerical analysis has been carried out to investigate the flow field characteristics for exhaust gas in automobile engine DPF system. The DPF system performance is largely affected by exhaust gas flow while it passes through the complicated geometry of DOC/DPF system, fan shape structure, and perforated can with air for fuel combustion. Hence the characteristics of fluid velocity, pressure, and streamline are analyzed with velocity uniformity in front of DOC and swirl flow near the fan. It can be seen that the velocity uniformity increases with the gas flow rate including flow acceleration near the lower area of the fan. The air flow also influences the gas flow distribution close to the impeller and fan structure with complicated swirl flow. These results are expected to be applicable as fundamental design data for automobile engine exhaust system.