The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a study on the driving directions of QR Code-aware movable robots during the development of QR Code-aware indoor mobility robots.

The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a study on the application of QR Code position recognition during the development of QR Code-aware indoor mobility robots.

The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a study on the application of QR Code recognition system during the development of QR Code-aware indoor mobility robots.

The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a study on the position recognition control using QR Code during the development of QR Code-aware indoor mobility robots.

In this study, TMD(Tuned Mass Damper) is installed in a retractable-roof spatial structure in order to investigate dynamic response characteristics according to mass ratio and installed position of TMD on large spatial structures. The example analytical model is generated based on the Singapore sports hub stadium. Twenty eight analytical models are used to investigate optimal installation position of TMD for the example retractable-roof spatial structure using 4 to 16 TMDs. The mass of one TMD is set up 1% of total mass at the example analytical model. Displacement response ratio of model with TMD is compared with that of base model without TMD. It has been found from numerical simulation that it is more effective to install TMD at the edge of the spatial structure rather than to concentrate the TMD at the center of the spatial structure.

In order for the probe to perform ocean exploration and survey research, it is necessary to adjust the position of the ship as desired by dynamic positioning system. The dynamic positioning system of T/S NARA is applied to K-POS dynamic positioning system of Kongsberg, which makes maintaining the ship's position, changing position and heading control possible. T/S NARA is not capable of dynamic positioning if one or more propulsive forces are lost with DP Level One. However, it is predicted that dynamic positioning can be achieved even at the time of missing one thrust in a good sea condition. Therefore, we want to analyze the effect of each propulsion on the performance of dynamic position system. When one of the bow thruster and azimuth thrusters lost their propulsion, maintaining the ship's position, changing position and heading control performance were compared and analyzed. If the situation occurred disable from using the bow thruster, they can not maintain ship's position. Azimuth thruster was influential for the ship's position control and bow thruster was influential in heading control. The excellent dynamic positioning performance can be achieved, considering the propulsion power that will have a impact on each situation in the future.

Since the encoder and resolver are expensive, it is difficult to apply it as a position sensor of a motor in a real industrial field. Optical position sensors, such as encoders and resolvers, are also difficult to mount because of their size and durability. Therefore, in order to solve these problems, we propose a system that uses a linear motor as a stator and a magnet plate as a mover, and a system that excludes a separate linear scale and uses two linear Hall sensors and permanent magnets to generate a conventional sine wave, A linear motor capable of detecting an absolute position and a movement position of a magnet, a control method thereof, and a technology development that can reduce a production cost by developing a position control system using a magnet mover that can improve stability and reliability.

The purpose of this study is to design and control position and torque based on the steering controller of power tiller simulator developed by the National Institute of Agricultural Sciences. The tiller simulator selects sensors and motors to detect the motion of the mechanism required for steering, and controls the tiller's steering controller through the PID control method and the PWM control method which can control simultaneously the position and torque. Simulation tests are carried out under various conditions to verify the efficiency of the proposed controller. The power tiller training simulator can be used as a means to prevent agricultural machinery accidents caused by human factors. Through the simulator, the driver can experience a variety of tasks without any risk of collision, the results of his actions, and learn the cause and effect concepts, which can be used for safety education and accident experience.

Recently, a study on reducing the weight of the robot arm, which enables a high-speed operation and enables reducing the energy consumption has been actively carried out. A lightweight robot arm is hard to control because it behaves like a flexible body rather than a rigid body. This paper proposes a controller which combines a PID controller and a fuzzy logic controller for control the position and vibration of the flexible robot arm. In order to show the effectiveness of the proposed controller, MSC.ADAMS computational model which incorporates the finite element flexible robot arm model is developed, and is used for performing simulations. Simulations are carried out with two reference inputs, and three end masses. Simulation results show that the proposed controller controls the position and vibration of the flexible robot arm adaptively without being affected by the reference input and the end mass.

Paddy harrow machine used hydraulic actuator system has been changed to the electric actuator system method. Because driving system of the agricultural equipments has been changed to electric power system. Besides, the effort to reduce the tractor machine's horse power is proceeding rapidly. In this paper, pressure, load scale factor and loading force(dynamic, static force) are considered to determine the cylinder diameter of the electric actuator. The algorithms of paddy harrow machine was studied to control and test the components of link by using the PLC diagram. Also, the electric actuator mechanism system was evaluated through the PLC algorithm. These test results can be attributed to select the actuator capacity and to determine the reliability of the electric actuator system

본 연구에서는 스카이브릿지 설치위치 및 연결된 구조물의 고유진동주기 차이에 따른 전체 구조물의 진동제어 효과를 분석하였다. 이를 위하여 스카이브릿지로 연결된 40층과 50층 구조물을 예제 구조물로 사용하였고, 등가모형화기법을 이용하여 예제 모델을 구성하였다. El Centro 및 Taft 지진을 사용하여 경계비선형 시간이력해석을 수행하였고 구조물의 동적거동과 진동제어 효과를 분석하였다. 해석결과 변위응답은 스카이브릿지를 상부층에 설치할수록 더 효과적으로 제어할 수 있었고 가속도응답은 구조물의 중간층부근에 설치할 때 더 효과적으로 저감시킬 수 있었다.

The purpose of this paper is to determine the optimal placement of MR dampers for the vibration control of building structures. The dynamic characteristics of Bingham model, Simple Bouc-Wen model, Simple Bouc•Wen model with Mass Element and Spencer model for the modeling of MR dampers, were investigated. By performing the numerical analysis of SDOF system excited by harmonic, white noise, and seismic load, the type and amplitude of excitation which are important design factors of MR dampers were considered. Finally, Four cases for placement of MR dampers installed at 20-story building structure were considered and the corresponding results indicate that the case installing MR dampers sequentially at the story with maximum inter-story drifts provides the best performance.

Analog PID controllers have been designed to make good use of position control in industries. Recently, the importance of digital position control is emphasized for the requirements of controller which are not only to control the objects but to include various aspects such as easiness of design and implementation, simple exchange of control program and convenient communications of data between various controllers and a host computer. This study proposes a combined control method which is mixed the vaiable structure control (VSC) with the PI control for minimum time position control of DC servo motor by microcomputer. The results of test by this method show offset-free and minimum time optimal position control which is not affected by the disturbance and the system parameter variations. The validity of the proposed method comparing with the conventional PID control is proved by the response experiments.

The Variable Structure System(VSS) will be of much intrest to educators and design engineers who wish to demonstrate and investigate sophisticated position control methods and their applications. This paper describes DC motor position control by means of VSS concept. The control scheme is derived, implemented and tested in the laboratory where IBM AT computer has been used as a digital controller to control a representative servo system. The control system schematic is given and sample results are shown for illustration. This experiment may serve as a basis for further application of VSS.

본 논문에서는 수중운동체 중 하나인 잠수함의 코닝타워(Conning tower) 위치 및 제어판 형태에 따라 4가지 타입별로 나누어 회 전팔 시험(Rotating arm test)을 실시하였다. 또한 본 RA 시험을 통하여 유체력 미계수를 추정하였으며 수평면 운동에 대한 동적 안정성 (Dynamic stability)을 평가하였다. 특히, 자유수면의 영향으로부터 자유로운 심도비(Depth ratio) 6.0에서 힘과 모멘트를 측정한 후, 다중회귀 분석을 이용하여 유체력 미계수를 추정하였다. 최종적으로 선형유체력 미계수를 이용한 수평면 동적 안정성 지수를 산정함으로써 잠수함 타 입별 특성이 동적 안정성에 미치는 영향을 분석하였다.