검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 58

        9.
        2018.04 구독 인증기관·개인회원 무료
        경사지를 절개하고 콘크리트 구조물을 설치한 다음 구조물 벽과 천정을 단열하고 흙으로 덮어 엄개형 지하저장고를 개발하였다. 가로 4m, 세로 9m, 높이 5m의 저장고를 두께 400mm의 철근콘크리트 벽과 천정으로 설치하고, 외부를 콜탈로 방수한 다음 발포폴리스티렌 100mm로 단열하고, 비닐필름으로 방수한 다음 다시 외부를 자갈과 흙으로 2,000mm 두께로 복토하여 3중 중단열 하였다. 개폐 시 냉기의 손실을 억제하기 위하여 출입문을 2중문으로 설치하고 냉각기는 3마력 용량으로 설치하여 같은 크기의 기존 지상식 저장고의 5마력보다 40% 절약하였다. 여기에 봄배추, 가을배추, 겨울배추를 저장 시험한 결과 월평균 소비전력량이 15.2kwh/㎡로 지상식의 19.3-21.9kwh/㎡보다 21.3-30.6% 절약되었고 암반굴착식 지하저장고보다는 47.0% 절약되었다. 엄개형 지하저장고의 건설비는 소형(10평)은 지상저장고보다 고가이나, 50평형은 지상저장고와 비슷하였고, 25평형 4개를 연결하여 건설하면 더 저렴한 것으로 추정되었다. 저장배추의 품질은 처음 저장했던 2016년 가을배추는 지상저장고 저장 배추보다 낮았으나, 2017년 겨울배추, 봄배추, 가을배추는 지장저장고 저장 배추와 유의적인 차이가 없었다. 엄개형 지하저장시스템은 배추 등 청과물을 연중 저비용으로 저장할 수 있는 지상저장고를 대체할 수 있는 경제성 있는 저장시스템으로 평가되었다.
        10.
        2018.04 구독 인증기관·개인회원 무료
        감귤의 세척 후 오염 및 포장 후 품질 저하를 예방하기 위하여 활성칼슘 용액(0.2%, w/w, highly activated calcium oxide/distilled water, CaO 용액) 세척 후 가스치환포장(modified atmosphere packaging, MAP)을 하고 대기압 유전체 장벽방전 콜드 플라스마(atmospheric dielectric barrier discharge cold plasma, ADCP)처리를 하는 과채류 살균 통합 시스템을 개발하였다. 처리 방법은 MAP(2% CO2,10%O2)및 공기 포장(0.03% CO2,21%O2)하여 처리 전압 26.4 kV에서 2분 동안 ADCP 처리하거나, CaO 용액에 3분 동안 침지 후 건조시킨 감귤을 MAP 및 공기 포장하여 처리 전압 26.4 kV에서 2분 동안 ADCP처리 한 것이었다 (CaO-ADCP). 각각의 처리된 감귤 시료들을 4 °C에서 35일, 그리고 25 °C에서 14일간 저장하여 포장 방법에 따른 ADCP 처리된 감귤과 CaO-ADCP 처리된 감귤의 저장 중 이화학적 특성에 대한 영향을 확인하였다. 저장 일자 별로 저장 온도와 처리 방법에 상관없이 MAP된 감귤과 공기 포장된 감귤 간 호흡률은 차이를 보이지 않았고, 포장 내부의 가스농도를 효과적으로 유지하였으며 4 °C 저장 중 과육의 당도를 효과적으로 유지하였다(p<0.05). 포장 방법에 상관없이 CaO-ADCP 처리된 감귤이 무처리와 단독으로 ADCP 처리된 감귤보다 호흡률이 낮았고, 무처리와 단독 ADCP 처리된 감귤보다 더 효과적으로 포장 내부의 가스 농도를 유지하였으며 과육의 당도 유지에 효과적이었다(p<0.05). MAP와 CaO-ADCP 처리는 감귤의 pH, 적정산도, 색도, ascorbic acid, 그리고 과육 및 과피의 총 폴리페놀 함량과 항산화능에 영향을 미치지 않았다. 본 연구를 통해 CaO 세척, MAP, 그리고 ADCP 처리가 병합으로 이루어지는 살균 통합 시스템이 감귤의 저장성을 향상시킬 수 있는 기술로서의 가능성을 확인할 수 있었다.
        11.
        2011.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper addresses the analysis of the travel distance and order picking time of the vehicle in a aisle when items are picked by the batch in a warehouse system. Batching is to combine several orders in a single tour of the storage/retrieval machine. An
        4,000원
        15.
        2006.05 구독 인증기관 무료, 개인회원 유료
        본 연구는 두 대의 기계로 연속해서 주문 처리를 수행하게 되는 생산시스템의 운영에 있어서 생산자와 고객의 입장을 고려하는 작업투입순서 결정방법을 제시한다. 생산자의 입장에서는 기계의 유휴시간을 최소화하는 것에 관심을 갖고 있고, 고객의 입장에서는 납기지연의 최소화에 관심이 있다고 가정한다. 두 대의 기계로 작업이 진행되는 생산시스템의 운영에 대한 연구는 그동안 많은 연구자들에 의해서 이루어져 왔으나 기계와 기계 사이에 임시저장공간에 대한 제한을 두지 않고 있다. 그런데 그러한 모델들은 작업장에 배치된 기계들 사이에 공간이 충분하여 재공품의 증가를 허용하는 경우에만 적용이 가능하다. 본 연구에서는 임시저장공간에 제한이 있는 생산시스템의 작업투입순서를 결정하는데 있어서 납기지연시간과 기계의 유휴시간을 함께 고려하기 위하여 평가함수를 이용한다. 본 연구에서 제시한 방법에 대해서 Stevens와 Gremmill이 제시한 방법과 비교하여 그 결과를 제시한다.
        4,000원
        16.
        2004.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper, we introduce the development of the large storage system in order to record the observed space radio signal in the Korean VLBI Network(KVN) with high-speed. The KVN is the Very Long Baseline Interferometery(VLBI) to observe the birth of star, the structure of space by constructing radio telescope with diameter 21m at the Seoul, Ulsan, Jeju from 2001 to 2007 years. To do this, Korea Astronomy Observatory joined the international consortium for developing the high-speed large storage system(Mark 5), which is developed by MIT Haystack observatory. The Mark 5 system based on hard disk has to record up to 1 Gbps the observed space radio signal. The main features of Mark 5 system are as follows; First it is able to directly record the input data to the hard disk without PC1(Peripheral Component Interconnect) internal bus, and the second, it has two hard disk banks, which are able to hot-swap ATA/IDE type very cheap up to 1 Gbps recording and playback. The third is that it follows the international VLBI standard interface hardware(VSI-H). Therefore it can be connect directly the VSI-H type system at the input/output. Finally it also supports e- VLBI(Electronic-VLBI) through the standard Gigabits Ethernet connection.
        4,000원
        17.
        2018.06 KCI 등재 SCOPUS 서비스 종료(열람 제한)
        During the seven years from 2009 to 2016, PWR SNF (spent nuclear fuel) transportation and storage systems suitable for domestic conditions were developed by the government to cope with the saturation of wet storage capacity in NPPs. One of the developed systems is a multipurpose metal cask applicable for transportation/storage; the other is a concrete cask dedicated to storage. Efficient cask technologies were secured utilizing the characteristics and experience of relevant industrial, academic and research institutes. Technological independence was also achieved through several patent registrations of research outcomes. To prepare for a rapid increase of demand in the near future, technology transfer of secured patents and technologies to the domestic industry was carried out twice in the years of 2016 and 2017. This
        19.
        2016.08 KCI 등재 SCOPUS 서비스 종료(열람 제한)
        For the distribution of fresh produce, the thermoelectric cooling system combined with thermo electric materials (TEM) and phase change material (PCM) was studied. The PCM used this study was produced by in-situ polymerization technology which referred microencapsulation of hydrocarbon (n-tetradecane and n-hexadecane). In this study, quality characteristics of bell peppers in thermoelectric cooling system combined with TEM and PCM were analyzed and control was placed in an EPS (expanded polystyrene) box. As a result of quality characteristics analysis, weight of bell peppers decreased and moisture content of bell peppers was 90.96~94.43% during storage. Vitamin C content of bell pepper decreased during storage and reduction ratio of control was higher than that of BPT-5 treatment(bell pepper in thermoelectric cooling system with PCM which is kept the temperature at 5℃). The result of color value, on 21 day, ΔE value of BPT-5 treatment was 5.05 while that of control was 41.8. On 21 day, total bacteria count of BPT-5 treated bell pepper shown less than that of control. In conclusion, it suggested that the thermoelectric cooling system combined with PCM improved quality of fresh produce during transportation and storage.
        20.
        2016.06 KCI 등재 서비스 종료(열람 제한)
        The thermal and mechanical properties of fiber-reinforced cement-based composite for solar thermal energy storage were investigated in this paper. The effect of the addition of different cement-based materials to Ordinary Portland cement on the thermal and mechanical characteristics of fiber-reinforced composite was investigated. Experiments were performed to measure mechanical properties including compressive strength before and after thermal cycling and split tensile strength, and to measure thermal properties including thermal conductivity and specific heat. Test results showed that the residual compressive strength of mixtures with OPC and slag was greatest among cement-based composite. Thermal conductivity of mixtures including graphite was greater than that of any other mixtures, indicating favor of graphite for improving thermal transfer in terms of charging and discharging in thermal energy storage system. The addition of CSA or zirconium increased specific heat of fiber-reinforced cement-based composite. Test results of this study could be actually used for the design of thermal energy storage system in concentrating solar power plants.
        1 2 3